Regkey Import via task sequence using command line. Running directly from DP.

I have a package that is going to run straight from the dp called JAVAHOME. Inside this package there is a regkey called JAVAHOME.REG
If I want to run it as part of a task sequence using a command line.
The run a command line step has use package called JAVAHOME checked.
Now to import it, in run a command line I use
cmd.exe /c reg.exe import javahome.reg
or
cmd.exe /c reg.exe import .\javahome.reg
I always get it wrong when running things directly from the DP.

To be sure about the behavior, I would use a batch file and use the %~dp0 variable. So, the command line in the batch file would be something like
reg.exe import %~dp0javahome.reg
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

How to Create Test Sequence Document in HTML using command line

How to Create Test Sequence Document in HTML using command line
I have lot of sequences and I want to create Test Sequence Documentation in HTML format using Command Line automatically, is there a way to automate this task using .bat file or using C# .Net

If you aren't able to figure out how to call a C++ DLL in .net then there may be another option. Unfortunately I don't know how to do this off the top of my head and I don't have an example.
The other option would be to change docgen.seq a little bit to the dialog doesn't display and you just hardcode the options. Then you can use a command line to call testexec.exe: http://zone.ni.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/startup_opt/
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Deploying AMD Catalyst software via task sequence

I am trying to have the AMD Catalyst software installed on all machines with an AMD video card. Right now I am using a WMI query in my task sequence on the video controller. When I image the machine, the AMD software does not install via task sequence along
with the OS.
Here's the WMI query I'm using,
SELECT * FROM Win32_VideoController WHERE Name LIKE '%AMD%'
The application package itself works fine when I push it out to Software Centre after imaging.
The machine I currently have is a Dell 790, with an AMD Radeon HD 5450 card in it. I've tried changing the query to
SELECT * FROM Win32_VideoController WHERE Name LIKE '%AMD Radeon HD 5450%'
That didn't work either
I am fairly new to doing this in SCCM, so any advice is appreciated!

This is what the log file shows,
Parsing step node: AMD Radeon Drivers with Catalyst Application TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Description: TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
ContinueOnError: true TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
SuccessCodeList: 0 TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
A condition is associated with the step found TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Found and operator. TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
There are 1 operands TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
**Processing expression node TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Found SMS_TaskSequence_WMIConditionExpression expression. TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
**In ProcessBuiltInCondition node: expression TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
There are 2 operands in the built in action TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Operand Namespace=root\cimv2 TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Operand Query=SELECT * FROM Win32_VideoController WHERE Name LIKE '%AMD Radeon HD 5450%' TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Successfully added 3 condition parameters TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Disable: TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Run in attribute: FullOS TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Timeout: TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
DefaultVarlist found TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Variable name: OSDApp0Description TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Variable name: OSDApp0DisplayName TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Variable name: OSDApp0Name TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Variable name: OSDAppCount TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Action command line: smsappinstall.exe /app:ScopeId_8268EA23-B1E9-4253-B5FD-3518040FB65A/Application_1493ab57-12ba-4ef0-ab47-0f48e93fcca8 /basevar: /continueOnError:True TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Adding instruction at 13 TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Processed all elements TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Adding end group instruction at 14 TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
The next instruction after group will be at 15 TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Processing group TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
After this is goes to the next sequence. No errors that I can see, but not sure why its skipping it

Task Sequence failed to restore captured data from USB drive onto a new machine using UDI task requence

Hi,
Environment ConfigMgr 2012 R2
Replace Scenario: Capture data to a USB external drive and Restore it from USB external drive.
Steps taken:
1) Created Computer Association with New computer and Source computer
2) Deployed UDI replace Task Sequence to Source computer and captured data to a USB external drive
3) Run UDI Task Sequence from Boot Media to Restore data from USB External drive which had the captured data.
Issue:
My task sequence failed to restore data from USB external drive.
Is there a fix
Any help is greatly appreciated it.

I created a query to see the deployment logs in real time. I see the TS fails when running "Request State Store" task. Here are the logs.
Severity Type Site code Date / Time System Component Message ID Description
Error Milestone POK 7/22/2014 4:13:15 PM MININT-P6E4T6G Task Sequence Engine 11141 The task sequence execution engine failed execution of a task sequence. The operating system reported error 1: Incorrect function.
Error Milestone POK 7/22/2014 4:13:15 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Error in the task sequence) in the group (Gather Logs and StateStore on Failure)
with the error code 1 Action output: [ smsswd.exe ] PackageID = '' BaseVar = '', ContinueOnError='' ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' SwdAction = '0001' Set command line: Run command line Working dir 'not
set' Executing command line: Run command line Process completed with exit code 1 Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. Microsoft Deployment Toolkit version: 6.2.5019.0 The task sequencer
log is located at C:\WINDOWS\CCM\Logs\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTI deployment failed, Return Code = 1 Command line returned 1. The operating system reported error 1: Incorrect function.
Information Milestone POK 7/22/2014 4:13:14 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Copy Logs) in the group (Gather Logs and StateStore on Failure)
with exit code 0 Action output: ... 扴捡杫潲湵⹤潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就瑺獩瑥慢正牧畯摮氮杯潃祰湩⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯穜楴慴潴⹯潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散�潌獧䍜剏ⵐ䠳䑗塐就潃祰湩⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯作䑓敓畴坰穩牡⹤潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就协卄瑥灵楗慺摲氮杯潃祰湩⁧㩃坜义佄南停湡桴�潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就慐瑮敨屲湕瑡整摮䍇潃祰湩⁧潬⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯䉜䑄氮杯挠湯整瑮⁳潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌�Console
> Successfully resized the shadow copy storage association Return code from command = 0 Cleaning up default wallpaper registry keys Process completed with exit code 0 zticopylogs processing completed successfully. Command line returned 0.
Information Milestone POK 7/22/2014 4:13:07 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Move State Store) in the group (Gather Logs and StateStore on Failure)
with exit code 0 Action output: [ smsswd.exe ] PackageID = '' BaseVar = '', ContinueOnError='' ProgramName = 'cscript.exe "C:\_SMSTaskSequence\WDPackage\scripts\ztimovestatestore.wsf"' SwdAction = '0001' Command line for extension .exe is "%1" %* Set
command line: Run command lineWorking dir 'not set' Executing command line: Run command line Process completed with exit code 0 Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. Microsoft Deployment
Toolkit version: 6.2.5019.0 The task sequencer log is located at C:\WINDOWS\CCM\Logs\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ztimovestatestore processing completed successfully. Command line returned 0.
Information Milestone POK 7/22/2014 4:13:07 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Gather) in the group (Gather Logs and StateStore on Failure) with
exit code 0 Action output: ... (BIOS is 'DELL - 1072009'). Property IsVM is now = False Finished getting virtualization info Connection succeeded to MicrosoftVolumeEncryption There are no encrypted drives Property IsBDE is now = False Processing
the phase. Determining theINI file to use. Using COMMAND LINE ARG: Ini file = CustomSettings.ini Finished determining the INI file to use. Added new custom property MYCUSTOMPROPERTY Using from [Settings]: Rule Priority = DEFAULT ------ Processing the
[DEFAULT] section ------Process completed with exit code 0 ------ Done processing CustomSettings.ini ------ Remapping variables. Property TaskSequenceID is now = Property DeploymentType is now = NEWCOMPUTER Finished remapping variables. ZTIGather processing
completed successfully. Command line returned 0 ReleaseSource() for C:\_SMSTaskSequence\Packages\POK0000F. reference count 1 for the source C:\_SMSTaskSequence\Packages\POK0000F before releasing Released the resolved source C:\_SMSTaskSequence\Packages\POK0000F.
Information Milestone POK 7/22/2014 4:13:03 PM MININT-P6E4T6G Task Sequence Engine 11130 The task sequence execution engine skipped the action (Use Toolkit Package) in the group (Gather Logs and StateStore on Failure) because
the condition was evaluated to be false.
Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Set Error Code) in the group (Gather Logs and StateStore on Failure)
with exit code 0 Action output: Finished with error code 0.
Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11124 The task sequence execution engine started the group (Gather Logs and StateStore on Failure).
Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11122 The task sequence execution engine skipped the group (Cancelled Wizard Group) because the condition was evaluated to be false.
Error Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Connect to State Store) in the group (State Restore) with the error code 1
Action output: ... ( 0x80070035 ) , trying to connect without username. The network path was not found. Unable to connect to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Sleeping for 15 seconds. Unable to connect to share: The network path was notfound. ( 0x80070035 ) , trying to
connect without username. The network path was not found. Unable to connect to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Sleeping for 20 seconds. Unable to connect to share: The network path wasnot found. ( 0x80070035 ) , trying to
connect without username. The network path was not found. Unable to connect to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Sleeping for 25 seconds. Process completed with exit code 1 ERROR - Unable to map a network drive to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Unable to connect to 563807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f ZTI ERROR - Non-zero return code by ZTIConnect,
rc = 1 Command line returned 1. The operating system reported error 1: Incorrect function.
Warning Milestone POK 7/22/2014 4:11:46 PM MININT-P6E4T6G Task Sequence Engine 11138 The task sequence execution engine ignored execution failure of the action (Request State Store) in the group (State Restore).
Error Milestone POK 7/22/2014 4:11:46 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Request State Store) in the group (State Restore) with the error code 16389
Action output: ... etting Media Certificate. Sending request to MP
http://abcdefg.xyx.xyz.local. Setting message signatures. Setting the authenticator. CLibSMSMessageWinHttpTransport::Send: URL: abcdefg.xyx.xyz.local:80 CCM_POST /ccm_system/requestRequest was successful. migInfoRequestMessage.DoRequest (m_sResponse,true),
HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1098) pClientRequestToMP->DoRequest(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2778) ExecuteRestoreRequestToMP(migInfoFromMP),
HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2903) ExecuteRestoreRequest(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\main.cpp,84) OSDSMPClient finished: 0x00004005 reply from server
is 'NoReply' ClientRequestToMP::DoRequest failed (0x80004005). ExecuteRestoreRequestToMP failed (0x80004005). ExecuteRestoreRequest failed (0x80004005).. The operating system reported error 1: Incorrect function.

Error while creating pool using command line

I am trying to create connection pool using command line as :
%JAVA_HOME%\bin\java weblogic.Admin -url %serUrl% -username %serUser% -password %serPwd% CREATE_POOL "XXXXXXXX" url=%DB2Url%,driver=com.ibm.db2.jcc.DB2Driver,testConnsOnReserve=true,testTableName=SYSTABLES,initialCapacity=2,maxCapacity=50,capacityIncrement=2,allowShrinking=true,props=user=%DB2Usr%;password=%DB2Pwd%
This was working fine in 8.1 ,but when i am using same in 9.2 it gives following error in console:
======================================================
<Feb 2, 2007 9:58:11 AM IST> <Error> <Deployer> <BEA-149265> <Failure occured in
the execution of deployment request with ID '1170390490712' for task 'weblogic.
deploy.configChangeTask.0'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:268)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(Modu
leListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(Depl
oymentCallbackFlow.java:360)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
river.java:26)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(Dep
loymentCallbackFlow.java:56)
Truncated. see log file for complete stacktrace
weblogic.common.resourcepool.ResourceSystemException: Cannot load driver class:
com.ibm.db2.jcc.DB2Driver
at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:2
92)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(Connect
ionEnvFactory.java:77)
=====================================================
when i am again trying to start server , its unable to start.
Anybody have idea why this exception is coming.

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

How can I create a NetBoot image using command line tools?

Is it possible to create a NetBoot image entirely using command line tools?
(That is, without using the SystemImageUtility)
If so, are there reasonable instructions posted somewhere?
I don't believe I can use SystemImageUtility with my current setup,
but I would be happy to hear how I could:
I have a set of Xserve clusternodes but without optical drives or video cards.
One node acts as the head, running DHCP, DNS, OpenDirectory, Xgrid.
They are wired to a gigabit switch.
I have a PowerBook connected on the subnet which has ServerAdmin Tools installed.
I don't think when I run SystemImageUtility on my PowerBook that I can successfully image one of the clusternodes disks over the network.
I have tried to start one node in target(Firewire) mode, connect it via Firewire
to the head node, and run hdiutil from the head node to make a complete disk image of the clusternode's drive.
But a NetBoot image requires the whole nbi file, right?
Could I then use copy this disk image to my PowerBook and use SystemImageUtility on my PowerBook to create a NetBoot image from it?
I really have tried to read the PDFs, but I found the section on System Imaging in the Command Line Reference rather unhelpful.
Thanks for anyones help.
dmaus
Mac OS X (10.4.4)

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

How do I install (import) certificat into FireFox using commad line?

I can import certificat using certutil.exe in command line, but this certificat is available only in Internet Explorer.
I can import certyficat into FireFox using its GUI. I must import that certificat on more then 60 PCs.
Question is: how do I install (import) certificat into FireFox using commad line?

HI ScanBit,
Thank you for your question, in order to import the certificate in the command line you will need these resources:
*[https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/tools/NSS_Tools_certutil]
If you have any other questions about this, we are happy to help.

I want to use command line to execute an oracle report?

Dear all,
I am using Oracle Application. Does anyone know how to use command line to execute an oracle report?
I mean execute command from client to server.
Please advice,
Amy
Edited by: amychan60 on Dec 13, 2009 11:33 PM

Hi,
Using Oracle Application Server the standard way for a client to request a report is via a HTTP request. This doesn't really lend itself to use directly on a command line on a client however you could use the following:
explorer "http://your_server/reports/rwservlet?report=report_name.rdf&userid=userid/password@db_sid&paramform=no&destype=FILE&desname=c:\temp\filename.pdf&desformat=pdf"
This will load explorer and submit that URL for you and request the report. You can change the parameters depending on the report output you require.
If you need something that is silent (ie doesn't load in explorer) you'll need to investigate other ways of submitting that URL request, perhaps using Java. You could also use SRW.run_report (Event Driven Publishing) to submit the request using SQL.
Cheers,
Toby.

OIM11g R1: Exporting Objects using command line utility

Hi All,
Is it possible to export/import OIM objects using command line utility (As per my requirement, I am not suppose to use the OIM Deployment Manager from UI)?
I am looking for something like oimtool if provided OOTB by oracle.
Regards,
Sunny
Edited by: 968494 on Nov 2, 2012 3:35 PM

Sunny,
What kind of objects do you want to export/import. I am asking because we have such command tool with Weblogic and OIM. Check this out:
1-http://itnaf.org/2012/09/23/how-to-import-and-export-metadata-from-oim-mds/
2-ttp://docs.oracle.com/cd/E14571_01/doc.1111/e14309/utils.htm
I hope this helps,
Thiago Leoncio.

Security on HBR using Command Line

Is it possible to setup and remove HBR security using command line? There is a command line utility to launch HBRs, Is there a similar way to update security programmatically, rather than manually changing it.

Unfortunately you can't set the security by command line, in V11 you can use LCM to export/import business rules which contain provisioning but this a is a full rule and it is not so clever at overwriting if the rule already exists.
If you are on V11 and using calc manager then you can use a utility to import the security.
Cheers
John
http://john-goodwin.blogspot.com/

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

Hi.
You simply can't. Snow Leopard is compiled in Intel binary only.
Good Luck.

How to print a specific page from a given PDF document, using command line, please?

Hello,
I need your advise, please. My customer requires to print a specfic page from a pdf document they receive, using command line or 3rd party solution.
Anything you can advise, please? I have seen AcroRD32.exe options, but can only print the whole document.
Kind Regards

Not sure if there are any examples. The Acrobat SDK is a must, but it is best treated as documentation to study rather than examples to copy. The examples only illustrate a tiny fraction of the capabiliies.
(One other note: the solution must involve the client owning Acrobat; Acrobat is not for server use).

How to open url in acrobat reader using command line

Hi,
I need to open file from url using command line, but I'm still getting some error (wrong filename).
I've tried for example this command:
AcroRd32.exe http://www.adobe.com/devnet/acrobat/pdfs/pdf_open_parameters.pdf
Can anyone help me and tell me what's wrong?

You can't use a URL as parameter for AcroRd32.exe.

Getting error when using the "/parameter" switch in command line run

Has anyone experienced this problem before?
My report queries over 100,000 records from a view. When the report is run from the command line every thing works fine.
But when I add a condition using a "parameter", although the report still runs fine from the destop, when launched from the command line it errs.
"Oracle Discoverer Desktop has encountered a problem and needs to close. ..."
"The instruction at "0x0044397c" referenced memory at "0x0000004e". The memory cound not be "read"...."
I'm guessing its a memory issue with my PC. I've tested using a parameter with other reports using fewer records and it doesn't err from the command line.
I can work around the issue by not using a parameter but then I have 20 versions of the same report each with a different condition.
Any suggestions would be appreciated.
Lise McGillis

Hi Michael,
I'm using an DELL Intel Pentium 4 CPU 3.00 GHz with 1 GB of RAM. We use Microsoft Windows XP Prof version 2002.
As for Discoverer we are using 10G, Desktop Client 10.1.2.48.18 - 1047500 KB available memory , 2099744 KB Free disk space.
I'm not sure I have acess to a computer with more RAM but I'm looking into it.
What I'm frustrated by is the fact that the parameter works fine when run directly from the desktop but when passed from the command line it bombs... but only when dealing with mega records.
Lise.

How to duplicate a target and add resources in xcode using command line?

I am trying to use command line tools to create, add resources, build, archive and export to ipa in xcode. I could do the Build, Archive and Exporting to IPA through the command line tools(xcodebuild). But I also wanted to duplicate the target in the same project,add a new Info.plist to the duplicated target resource through command line itself. How to do it? I could not find any valuable answers by Googling. I could not find any proper documentation also in Apple Sites.
Is there any tools that can be used to perform these? I don't want to use the UI. Please, help me out.

The Mac App Store is not appropriate for command line tools. You can use any language you want.

Regkey Import via task sequence using command line. Running directly from DP.

Similar Messages

Maybe you are looking for