Task Sequence failed to restore captured data from USB drive onto a new machine using UDI task requence

Hi,
Environment ConfigMgr 2012 R2
Replace Scenario: Capture data to a USB external drive and Restore it from USB external drive.
Steps taken:
1) Created Computer Association with New computer and Source computer
2) Deployed UDI replace Task Sequence to Source computer and captured data to a USB external drive
3) Run UDI Task Sequence from Boot Media to Restore data from USB External drive which had the captured data.
Issue:
My task sequence failed to restore data from USB external drive.
Is there a fix
Any help is greatly appreciated it.

I created a query to see the deployment logs in real time. I see the TS fails when running "Request State Store" task. Here are the logs.
Severity Type Site code Date / Time System Component Message ID Description
Error Milestone POK 7/22/2014 4:13:15 PM MININT-P6E4T6G Task Sequence Engine 11141 The task sequence execution engine failed execution of a task sequence. The operating system reported error 1: Incorrect function.
Error Milestone POK 7/22/2014 4:13:15 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Error in the task sequence) in the group (Gather Logs and StateStore on Failure)
with the error code 1 Action output: [ smsswd.exe ] PackageID = '' BaseVar = '', ContinueOnError='' ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' SwdAction = '0001' Set command line: Run command line Working dir 'not
set' Executing command line: Run command line Process completed with exit code 1 Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. Microsoft Deployment Toolkit version: 6.2.5019.0 The task sequencer
log is located at C:\WINDOWS\CCM\Logs\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTI deployment failed, Return Code = 1 Command line returned 1. The operating system reported error 1: Incorrect function.
Information Milestone POK 7/22/2014 4:13:14 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Copy Logs) in the group (Gather Logs and StateStore on Failure)
with exit code 0 Action output: ... 扴捡杫潲湵⹤潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就瑺獩瑥慢正牧畯摮氮杯潃祰湩⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯穜楴慴潴⹯潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散�潌獧䍜剏ⵐ䠳䑗塐就潃祰湩⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯作䑓敓畴坰穩牡⹤潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就协卄瑥灵楗慺摲氮杯潃祰湩⁧㩃坜义佄南停湡桴�潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就慐瑮敨屲湕瑡整摮䍇潃祰湩⁧潬⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯䉜䑄氮杯挠湯整瑮⁳潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌�Console
> Successfully resized the shadow copy storage association Return code from command = 0 Cleaning up default wallpaper registry keys Process completed with exit code 0 zticopylogs processing completed successfully. Command line returned 0.
Information Milestone POK 7/22/2014 4:13:07 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Move State Store) in the group (Gather Logs and StateStore on Failure)
with exit code 0 Action output: [ smsswd.exe ] PackageID = '' BaseVar = '', ContinueOnError='' ProgramName = 'cscript.exe "C:\_SMSTaskSequence\WDPackage\scripts\ztimovestatestore.wsf"' SwdAction = '0001' Command line for extension .exe is "%1" %* Set
command line: Run command lineWorking dir 'not set' Executing command line: Run command line Process completed with exit code 0 Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. Microsoft Deployment
Toolkit version: 6.2.5019.0 The task sequencer log is located at C:\WINDOWS\CCM\Logs\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ztimovestatestore processing completed successfully. Command line returned 0.
Information Milestone POK 7/22/2014 4:13:07 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Gather) in the group (Gather Logs and StateStore on Failure) with
exit code 0 Action output: ... (BIOS is 'DELL - 1072009'). Property IsVM is now = False Finished getting virtualization info Connection succeeded to MicrosoftVolumeEncryption There are no encrypted drives Property IsBDE is now = False Processing
the phase. Determining theINI file to use. Using COMMAND LINE ARG: Ini file = CustomSettings.ini Finished determining the INI file to use. Added new custom property MYCUSTOMPROPERTY Using from [Settings]: Rule Priority = DEFAULT ------ Processing the
[DEFAULT] section ------Process completed with exit code 0 ------ Done processing CustomSettings.ini ------ Remapping variables. Property TaskSequenceID is now = Property DeploymentType is now = NEWCOMPUTER Finished remapping variables. ZTIGather processing
completed successfully. Command line returned 0 ReleaseSource() for C:\_SMSTaskSequence\Packages\POK0000F. reference count 1 for the source C:\_SMSTaskSequence\Packages\POK0000F before releasing Released the resolved source C:\_SMSTaskSequence\Packages\POK0000F.
Information Milestone POK 7/22/2014 4:13:03 PM MININT-P6E4T6G Task Sequence Engine 11130 The task sequence execution engine skipped the action (Use Toolkit Package) in the group (Gather Logs and StateStore on Failure) because
the condition was evaluated to be false.
Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Set Error Code) in the group (Gather Logs and StateStore on Failure)
with exit code 0 Action output: Finished with error code 0.
Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11124 The task sequence execution engine started the group (Gather Logs and StateStore on Failure).
Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11122 The task sequence execution engine skipped the group (Cancelled Wizard Group) because the condition was evaluated to be false.
Error Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Connect to State Store) in the group (State Restore) with the error code 1
Action output: ... ( 0x80070035 ) , trying to connect without username. The network path was not found. Unable to connect to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Sleeping for 15 seconds. Unable to connect to share: The network path was notfound. ( 0x80070035 ) , trying to
connect without username. The network path was not found. Unable to connect to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Sleeping for 20 seconds. Unable to connect to share: The network path wasnot found. ( 0x80070035 ) , trying to
connect without username. The network path was not found. Unable to connect to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Sleeping for 25 seconds. Process completed with exit code 1 ERROR - Unable to map a network drive to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Unable to connect to 563807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f ZTI ERROR - Non-zero return code by ZTIConnect,
rc = 1 Command line returned 1. The operating system reported error 1: Incorrect function.
Warning Milestone POK 7/22/2014 4:11:46 PM MININT-P6E4T6G Task Sequence Engine 11138 The task sequence execution engine ignored execution failure of the action (Request State Store) in the group (State Restore).
Error Milestone POK 7/22/2014 4:11:46 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Request State Store) in the group (State Restore) with the error code 16389
Action output: ... etting Media Certificate. Sending request to MP
http://abcdefg.xyx.xyz.local. Setting message signatures. Setting the authenticator. CLibSMSMessageWinHttpTransport::Send: URL: abcdefg.xyx.xyz.local:80 CCM_POST /ccm_system/requestRequest was successful. migInfoRequestMessage.DoRequest (m_sResponse,true),
HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1098) pClientRequestToMP->DoRequest(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2778) ExecuteRestoreRequestToMP(migInfoFromMP),
HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2903) ExecuteRestoreRequest(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\main.cpp,84) OSDSMPClient finished: 0x00004005 reply from server
is 'NoReply' ClientRequestToMP::DoRequest failed (0x80004005). ExecuteRestoreRequestToMP failed (0x80004005). ExecuteRestoreRequest failed (0x80004005).. The operating system reported error 1: Incorrect function.

Similar Messages

How to migrate data from oracle 9i database to new machine 11gr2 RAC ASM

Hi Expert
I need your expertise to advise me what is the best method to move data from oracle 9i database to new machine running oracle 11r2 RAC database with ASM.
Currently my production server running on HPUX ORACLE 9I database with normal file system. My new server is running SUN SOLARIS SPACR 64 bit ORACLE 11gr2 RAC with ASM. What is best method to move data over so it will be consistent. Any guide can refer.
Regard
William

Hi William,
See the note in metalink Migration of Oracle Database Instances Across OS Platforms [ID 733205.1] to saw the Endian Format of your OS. If is the same you can use the RMAN to convert the database to another OS, if not the only option is using export/import (Transportable Tablespaces).
To upgrade from 9i to 11g, see the note 837570.1 - Complete Checklist for Manual Upgrades to 11gR2.
To migrate your FS to ASM the only way is using RMAN, so see the note - How to move a datafile from a file system to ASM [ID 390274.1].
Hope this help you.
Best Regards,
Ruben Morais

Slow Wifi speed when transfering data from USB drive?

Hello guys,
Am I the only one to get slow WiFi speed when transfering data from USB disks or keys?
This is the new Mac Mini July 2011 (Macmini5,2)
Intel Core i7, 2.7 Ghz
8 Go 1333 MHz DDR3
Mac OS X Lion 10.7 (11A2061)
Thanks
Nicolas.

Hello again,
I'm also having this issue when using a Bluetooth Magic Mouse when downloading file. Is it a problem with the firmware or the BUS?
Anyone have the same issue?
Thanks
Nicolas.

Capturing data from usb webcam

I'm interested in the acquisition of footage from a usb webcam into labVIEW. I have the professional development system and downloaded NI-IMAQ which I believe i'll need from reading online material.
I don't really know where to start to link the camera with labview so any material would be a great help...
Final question, is it a big undertaking acquiring data from a video camera in labVIEW? it's just i've limited time to work on a project and want to know if it's worthwhile undertaking or if it will be very time heavy. I've a few months labVIEW development experience if that would give an indication to anyone...
Strokes

Hi,
First your USB Cam needs to be DirectShow Compliant.
Then you will need NI-IMAQdx from the Vision Acquisition Software 2009 (supports LV 8.2 and higher) or higher to acquire images from USB cameras. The NI IMAQ driver is to capture images from framegrabbers, and the NI SmartCamera, not for USB. There is also a own IMAQ USB Library for the Vision Acquisition 8.6 but since you need to buy the Acquisition Software I would recommend to use 2009 or higher where we added the DirectShow Support to IMAQdx.
The Vision Acquisition Software is just for image acquisition and processing. If you want to do image processing you will need the Vision Development Module.
And when doing a search at ni.com you should find some articles, examples and tutorials too.
I can't estimate how much time you will need get that running, but you could just try to run one of the examples for IMAQdx in LabVIEW and then see how it works.
Christian

Can't restore my data from hard drive with time machine

So basically I recently backed up my things on an external 1TB Seagate hard drive via Time Machine on my Mac. I then restored my Mac to its factory settings. However when I plugged in my hard drive it didn't show up in my finder. I opened Disk Utility and it shows up there but when I tried to restore my data it wasn't able to find it. This is so weird and I'm so scared can someone please help me

vanessayu wrote:
And another thing, my mac is randomly turning off and then displaying a gray screen saying your mac shut down because of a problem. does this have someting to do with the disk
Sounds like the TimeMachine drive is defective.
Uplug it and reboot and see if your problems go away.
If your TimeMachine is broken it might be possible to do data recovery on it, you can take it to a local PC/Mac tech and they will image it so the files are accessible, then you can pick through the mess as long as it wasn't encrypted or Filevaulted.
TimeMachine uses a lot of placeholder files, basically the same name but minus the content of the files for each saved state.
It's a lot of work going through all the folders to find your original files but as long as the drive works the files should be able to be recovered.
Sorry about your problems, TimeMachine hasn't quite lived up to it's expectations and I try to warn everyone NOT to completely trust it.

Transferring data from one HDD to a new HDD using disk utility?

I do not have a time machine backup of my HDD. I was wondering if it is posssible to use disk utility to restore data from the old HDD to the new HDD. Will I need the system disks to partition the new HDD first or is this even possible. If it is possible, will everything transfer using the Restore in disk utility?

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How do I transfer data from two computers onto my new mac?

I recently bought a new macbook pro with retina display after owning an iBook G4 and a powermac for 7 years but I now want to transfer the data from both of my computers (which both only have one account) onto my new computer. I'm wondering if it is possible to transfer the data from both of the computers onto my new one and if so how. Another issue is that my ibook had recently broken but the only issue was the ram was not working so I had the data recovered and put on an external hard drive so now what was on my ibook is now on an external hard drive. I really want to know if I can still transfer both computers onto my new one or if I can only transfer one of the computers onto my new one and I have to transfer the other one manually. Any ideas?

Migrating is simple and complicated at the same time, in your case simple to transfer files (e.g. films, pictures, docs...), and difficult for settings and all hidden stuff. My piece of advice is to use iBackup (grapefruit.ch) for system settings, which does not take too much, and simple drag-and-drop from older macs unto the new one. I would use firewire, as Retina does not this port, try to purchase a FW-to-ThB adapter, it may be worth having it. Connect the new mac to the old ones one after another, and restart the old ones in target mode (press T after chime), they will turn intro external drives, and may easily transfer anything.
If you are not familiar with iBackup, perhaps it is better to Migration Assistant, I do hope it works with older Mac OS. Note that, used after settings a new mac, it will create new users for the transfered data. The advantage is, they will transfer files and settings, but perhaps more than you really need.
Ort, as BGreg says, manual transfer of all files, this may prove slower, but you may have full control of all operations.

How to restore mail files from Time Capsule onto a different machine?

My Macbook Pro hard drive crashed, and I want to restore my backed-up mail files from Time Capsule onto my Desktop Mac (iMac 27"). When I try to restore by opening Time Capsule with Mail already open, I can only see the current mail files on the iMac (not the backed up files on the MacBook Pro), even when I point to the MacBook Pro backup file.

Hello there, AngryMario.
The following Knowledge Base article offers up how to restore mailboxes and content using Time Machine:
Mail (Mountain Lion): Restore mailboxes and their content
http://support.apple.com/kb/PH11713
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Restoring to SSD from USB drive with no HD

My Acronis cloning software refuses to work, and they refuse to help, so I'm trying to make my solid state drive the bootable device by making a system restore image on a USB external drive, and booting to a system repair DVD. I can't make the DVD disk boot! And I can't make recovery manager start with F11 despite it saying it will on the lower right screen.
I get an error "This version of system Recovery Options is not compatible with the version of windows you are trying to repair" I just made it from the computer I'm trying to repair! And if the hard drive is unplugged, how dies it know what version I'm trying to repair?

Hello @davidstreb,
I understand that you are not able to enable a system recovery from the RECOVERY Partition on your desktop computer, and I would be happy to assist you!
To recover your system, I recommend acquiring new recovery media by following the steps in this document on Obtaining HP Recovery Discs or an HP USB Recovery Drive. Once obtained, you can recover your operating system by following this resource on Performing an HP system recovery (Windows 8).
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My old comp crashed! How do I move data from my ipod onto the new one?

I had a dell laptop; it crashed... I have about 2500 songs and videos on my ipod; is there a way for me to move the data from the ipod to itunes in my new computer? Thanks for any help...

Hi! Welcome to Apple Discussions Forum.
If you have purchased songs from the iTunes Music Store, then those are pretty easy to transfer to your computer. You'll just need to follow [this instructions|http://docs.info.apple.com/article.html?artnum=305465].
All your other songs (for example, those ripped from your CD's), you'll need to use any 3rd party program to transfer them to your iTunes library!
Some can also transfer your playlists, videos, ratings, podcast...
*To use with iPod Touch/iPhone and other iPods:*
[iGadget|http://www.ipodsoft.com/site/pmwiki.php?n=igadget.Homepage] (Mac and Windows)
[iRepo|http://www.purpleghost.com/index.php?q=irepo] (Mac and Windows)
[iPod Access|http://www.findleydesigns.com/ipodaccess/index.html] (Mac and Windows)
*To use only with other iPods:*
[Media Widget|http://www.bootstrapdevelopment.com/showproduct.aspx?t=b#features] (Windows only)
[iDump|http://www.download.com/iDump/3000-2169_4-10407429.html] (Windows only)
[Senuti|http://www.fadingred.org/senuti> (Mac Only)
I would recommend you to keep your media safe, backing up library. Click [here|http://docs.info.apple.com/article.html?artnum=302392] to learn how to do it, using CD's or DVD's.
Hope this helps! If you still have doubts, please reply.
Best Regards,
!http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png!

I have Elements 6.0 on a an old machine which has now failed (motherboard issue). How do I re-install it from the old hard drive onto a new machine?

Can anyone help me to re-install elements 6? I have it sat on the hard drive of an old machine which has a motherboard failure. I have the serial no, and I have a hard drive caddy. What do I do?

Sorry I don’t know of any download links for PSE6. It may be worth thinking of upgrading to the latest version PSE13. It now has 64 bit support so you should see improved performance if your new machine has more than 4gb of memory (RAM)
The interface is different to PSE6 although most of the tools you are familiar with will work the same.
Why don’t you download the trial version from the link below and use it free for 30 days. If you are happy with it you can purchase from Adobe or any retailer or on-line store. No further installation is required; you simply enter your serial number to make the trial permanent. It’s a good way of ensuring a successful installation before making a commitment to purchase.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en

The drive my iTunes music was on is totally dead, so I'm on a new computer. Is there a way to restore my music from my iPod to the new machine?

I had a total hard drive failure. I cannot retrieve my music stored on this drive, including a few iTunes purchases I had not backed up. Is there a way to push my music from my iPod to a new computer with iTunes? I hate the idea of re-ripping my CD's, not to mention losing some iTunes purchases.

David,
I would take a look at this old post by another forum member Zevoneer on different ways to recover the media from your iPod.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Can I inherit backups from TWO drives onto a new Mac?

I am currently backing up my Macbook Pro to a Time Capsule which has a backup history of over a year. I am also backing up to a USB External drive.
I will be getting a new Macbook Air soon and I know that if I perform a full restore from my Time Capsule I will then be asked if I want to Inherit the backup history - which is what I want.
But what about the backup history on my USB External Drive? Can I also inherit the backup history of that?
The main reason I am asking is I have been thinking it would be much faster to perform a full restore from my USB External Drive - but if I did so would I still be able to inherit the backup of both my External drive AND my Time Capsule? As my Time Capsule has a much larger backup history on it.
Any help would be much appreciated.

Yes you can. When you set up the system again you can add the second drive as another Time Machine destination, and when you do so the system should ask you whether you would like to inherit the backups just as it does for the first TM drive. Select yes and it will maintain the drive as a separate backup destination but continue backing up to it.

How do I export my data from iphone 3g onto my new PC??

My last pc got the blue screen of death, now I have a new laptop and couldnt find within the forums how to export my pictures and back up my new contacts so I can do an update on my iphone; its been bugging out since my last update back in october. Any insights would help, Thanks!

Best option is to use the external backup you made and restore the iTunes folder to your new computer.
Try one of these if you have no backup:
http://alternativeto.net/software/phoneview/?platform=windows

How can I boot into PartedMagic from a USB drive on a newer MacbookPro?

Hello,
has anyone successfully booted into PartedMagic (or Gparted) from USB drive on a newer (2014) Macbook Pro? If so how? I've tried multiple ways of "burning" my ISO file to the USB drive but in no case am I able to boot into it. I seems to freeze a few seconds into the boot process. Somewhere I've read it might have something to do with EFI but I am not sure.
Looking forward to your feedback. JW

These are mpeg files probably mpeg 2 which iMovie won't import without conversion. Will they open in Quicktime player? If so do a command i and see what the inspector says about the file. MPEG Streamclip is a free app that will convert the Mpeg 2 to .Mov which iMovie will accept although it does require a converter you buy from Apple at $19 I think. Other converters are available just google for them.

Task Sequence failed to restore captured data from USB drive onto a new machine using UDI task requence

Similar Messages

Maybe you are looking for