Reimporting Target and Source structures

Hi,
We recently applied an OSS note (new field) and added a few fields to VBAK table and this is impacting an interface. I would like to get some help on reimporting the source and target structures. Following is the message I get in the processing log inside Message Mappings.
Target structure has no such path:
Greatly appreciate your help with this.
Thanks in advance,
Vish

Hi,
Right click on the Namespace and click on export, it will show you next steps, select whole Namespace to move, that way you wouldn't miss anything, or else you can select individual objects in the drop down and select the message mapping that you changed.
you need to export idoc structures too, right click on software component version and click export and go to individual objects in the drop down and select only the idocs that you want to move, or else you can move whole software component version so that there is no need to move namespace separately.
if you have CTS+ configured already it will create a TR, go to abap stack and type tcode SE09 and you will see a TR which is created. click on it and release the TR (there will be a truck fig on top of the screen after menu bar).
once released contact basis to import it or you can go to STMS and import it from there...
I am trying to post this since yesterday but it is not allowing me to
thanks.
Karna....

Similar Messages

Target and Source database

Hi All,
Can anyone please tell me what does Target and Source Database means ?
Thanks

It can get confusing! In RMAN the target is, usually, the database you wish to connect to to make, say, a backup.
When cloning, the Target is the Source database (i.e. the database you wish to make a clone of) and the clone is the Auxiliary.
However, terminologies can get a bit twisted in common parlance, with the Target database being referred to as the Source and the Auxiliary database being referred to as the Target!!!
HTH.

Difference betwin Allacation sttucture and source structure

< MODERATOR: Message locked. Please post in the correct forum. >
Hi friends any one explian the difference betwin allocation structure and source structure.

Hi
allocation structure defines the cost elements to be settled by cost elements. A source assignment is assigned to the allocation structure.
The source structure is used to settle costs incurred on the sender to various receivers, split by cost element. In this way, the source information is retained.
The source assignment defines the assignment of the debit cost element(s) to a receiver. More than one source assignments are summarized in one source structure

Difference between source file and source structure

Hello,
I have a source file with around 60 fields. But I need to upload only 5 fields. I defined a source structure in LSMW with 5 fields and specified the file with 60 fields as the source file. But when the data is read, only 2 out of 5 fields are read. What should I do?
Thank you

Hi !!
In case you are selecting only limited fields form a file with more fields in LSMW . Please apply following consideration :
1. Add a dummy field in your source structure to make the whole structure size equal to the total width of all fields in the source file. This is because in LSMW the file is read for the length of the SOURCE STRUCTURE width only . So if i want to read only field3 in following example i still need toa dda dummy field to ensure LSMW reads a total width of source file as the FIELD3 is at absolute end of the source file from length 40 to 60 only .
For example :
if my source file ahs following firve fields : FIELD1 (10) , FIELD2(30),FIELD3 (20) .
Declare your source structure as : FIELD3 (20),FIELD_DUMMY (40) .
2. When you deifne the source file in LSMW step 7 take care to notify whether you have field names at start of file or the field order is same as
source structure .
This should close your issue or get in touch for more here buddy

Target and Source Table - Query from ODI Repository

Hi folks,
Can anybody help me? I am trying to query the following from an ODI 11g work repository:
All tables and for each table the tables that are listed in designer as “filled by” (don’t know the exact translation as I am using a german ODI designer) – in other words “all tables and the tables they are depending on”. The reason is to perform a connect-by query on that.
There is a solution published on ODIEXPERTS: http://odiexperts.com/interface-mapping-query, but however it does not show me the expected results. Does anyone have an idea how to get a simple table like that:
TARGET          SOURCE
TAB1           TAB2
TAB1           TAB3
TAB2           TAB4
TAB3           TAB5
TAB3           TAB6
TAB6           TAB7
Using the Metadata Navigator is no option as we don’t have Weblogic installed and I need the data for further processing.

If memory serves you have an SNP_POP table still in that release, join to the Model table (the joins cols are obvious if I recall) to get the datastore names and your more or less there.
I dont have that table in 11.1.1.5 and we moved over a while back so cant really take a look anytime soon.

AttachMovie using variable target and source names

I've frequently used variable names for the target but is it impossible to do this:
holder.attachMovie(["mcButton"+i], ["box" + i + "_btn"], this.getNextHighestDepth()*200, {_x: arrBtnX[i], _y: arrBtnY[i]});
I can't get it to work and I haven't been able to find an example. It doesn't work without the square brackets either.
Thanks
Marion

Thank you very much for replying. I had tried that before without success but I discovered I had given the 'holder' a different name (doh!) Now that I am using the correct name, I find that it's working but only the last target movieclip appears. When I trace(i) I get the full trace. When I trace(btnHldr["box" + i + "_btn"]._x) I get the correct figures.
I have double-checked the linkage names for the mcButton0-5 movieclips and they are correct. I suspect it's looping through and replacing the same source with the target. I'm a bit puzzled.
Rgds
Marion

Message mapping---1 source structure and n target structures

I would like to know how many message mappings we need if we are mapping one source structure to 3 different target structures of a single receiver. I am assuming its just one message mapping.
Depending on the above answer how many interface mappings do we need.

Kalyan,
you need multi-mapping that maps one source structure to multiple target structures. Just search multi mapping in SDN and you will find many good posts.
Basically, in MM editor, go to signature tab and in the target messages add additional message types. Simple. --> Only one MM and one IM
Jayson

How to handle 1 Source Structure and N ( multiple Target Structure

Hi I have One source structure , Which is Source1 and mulitple target structure which Target1 , Target2 and Target3
I need Map this Source1 to Target1 and Target2 and Target3 based on the condition of one field of source1
ianyone please tell me how to do it
Thanking you
Sridhar

Hi Sridhar,
Yes Multimapping is possible without BPM from SP14 and above. But there are certain limitation on that as well. You can do only 1:N multi mapping and N:1 is not possible without BPM. In the case of 1:N mapping you would need to go for Enhanced Interface Determination and you will have a full advantage of that mapping if you use a adapter other than IDOC, HTTP and XI. In otherwords this holds good for adapters that runs on Adapter framework and not on Integration Engine.
BPM involved:
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
Without BPM:
http://help.sap.com/saphelp_nw04/helpdata/en/42/f3b31d48fb1bc8e10000000a11466f/content.htm
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Thanks
Ravi

Same source structure and different target structure without BPM

Hi Experts,
I am using PI 7.11.My requirement is at sender side the source structure is same.Basically invoice data coming from ECC to PI as a proxy message.
Receiver side adapter is JMS.At target side ,PI has to send the invoice data to 2 receiver systems.Payment node is coming in source XML,which always comes from ECC.For one of the business system ,Payment node should be sent.For the other BS,this node should be supressed.how to achieve this with single mapping?Payload based routing is not possible in my case as i dont have any field which differentiate the receiving system name.
Regards,
Karthiga

Hi,
In receiver determination, just input the two receivers (no conditions). In message mapping, you can use the constant function called receiver to suppress or create the node. You can only test it by editing the parameters in test tab e.g
At runtime, this value (receiver) will be filled out by the entries in receiver determination. So only one mapping is needed.
Hope this helps,
Mark

Problem in work flow of PE while mapping 2 source structure into 1 target

We have scenario in BPM where in we have to mapp 2 source structure's into target.
To be more specific one structure occurance is 0 to unbounded and other one is of single occurance.
We have done the mapping with target structure and tested it manually in mapping . its working fine..
While testing it in Configuration scenario, In the workflow process i.e PE process flow, we were not able to get one of the source message structure as the input Message. Instead of two source messages, it is seen only one. Please guide us in this issue.

actually we are receiving only one message, henece we do not need a correleation. But once we receive this message we are splitting into multiple messages in the transformation step. and we use these split messages in different transformation steps. but in one of the transformation steps we are unable see one of the split messages in the transformation step(though we have used the proper container element.). Please let me know if any ideas on this.

How to map multiple source structures to single target structure

Hi all,
I have the scenario of 2 input files so i am using BPM for it. I have created the message types of the 3 input files. I have to finally generate an XML file which will contain the data of all the 2 files. That is i have to do 3:1 mapping.
Source Structure of File 1:
DT_PWC_Customer
RECORDSET
CUSTOMER
 REF_NO
 CUSTOMER_NO
Source Structure of File 2:
DT_PWC_Customer
RECORDSET
METER
 REF_NO
 METER_NO
Target Structure of Final Output File:
DT_PWC_CustomerMeterData
RECORDSET
CUSTOMER_METER
 REF_NO
 CUSTOMER_NO
 METER_NO
Above nodes i have shown in a heirarchical order..nodes with same indentation are at same level.
Can anybody tell me how to do this mapping in IR in graphical editor.
RAJEEV GUPTA

Hi,
To elaborate my requirement, I want to tell that since i will be having 2 input files- one for Customer & one for Meter. I want to finally generate one XML file which will have data from both these 2 input files. That is, if Customer file has 3 records(3 REF_NO, 3 CUSTOMER_NO) and Meter file has 4 records(4 REF_NO, 4 METER_NO), the final output XML file will have 7 records(7 REF_NO, 3 CUSTOMER_NO,4 METER_NO).
Thanks,
Rajeev Gupta

Mapping 2 source structures to a single target database

Hi Experts, My scenario is a Proxy to JDBC in which I need to send data from 2 source structures to 1 target table.
Source structures :                                           Target:
ABC                                                                 XYZ
row1                                                                 InsertStatement
    Item1                                                                  DBTable
                                                                    Action
   (Fields)                                                     Table
                                                                                acess
DEF                                                                              -
row2                                                                          -
   item2                                                                         -
(Fields)
(Fields)
Please let me know how to map the 2 source nodes to the target access node to transfer data from the source tables to target database.
Regards,
Krishna

You should make use of BPM to collect the two source structures.
One of the BPM examples mentioned in IR --> SAP BASIS ---> SystemPatterns can be referred for this purpose.
Once the messages are collected, perform a 2:1 mapping (two Proxies as source message and one JDBC message as target).
If you want the mapping logic then please provide a proper format of both your Source and Target messages and the expected mapping, so that someone from SDN can help you out.
The target structure provided is a bit confusing.
Are you going to receive two different proxy messages (i.e. two different calls) or just one Proxy call and there you will have two different nodes within the same message??? ...... me confused
Regards,
Abhishek.
Edited by: abhishek salvi on Sep 25, 2009 11:51 AM

Syntax for Merge statement to insert into target and update source

Hello All,
I want to use Merge statement to insert records when not matched in my target and update records in source when matched. Is it possible to do using Merge statement.
create table a (aa number)
create table b (bb number)
alter table a add flg char(1)
merge b as target
using a as source
on (target.bb = source.aa)
when matched then
update set source.flg = 'Y'
WHEN NOT MATCHED THEN
insert (target.bb)
values
(source.aa)
Thanks.

Hi,
I have no idea about the version of DB, else some new features with respect version can be specified - just for informaitve purpose and to post across the verison of DB in future posts.
Coming to your issue and requirement.
if you check the syntax and functionality , then its on Merge on target base only - with respect to Update (matched o columns) and insert (for unmatched columns). Source - as the term is clear. It might not work out on source table.
- Pavan Kumar N
- ORACLE OCP - 9i/10g
https://www.oracleinternals.blogspot.com

HTTP url parameters to pass the target side how handle using udf and source is not mapped to target

HI Gur's.
I have a requirement HTTP -post -Proxy.
Post will send the data in URL. we have written the udf for handling the to receive the data we are not mapping with source structure to target structure .Url data display in SOAP header only.how to store the soap header data ECC using in proxy receiver.

thank you shahcsanjay for your reply
but I think that web.showDocument can not be used by ordinary java web application ..
I think it can be used only with with "oracle forms" Am I right ?
If no can you please tell me where can I find a useful document about how to use web.showDocument ...
thanks again
Saleem

Ensure field sequence is correct for data for mutiple source structure

Hi,
I'm using LSMW with IDOC message type 'FIDCC2' Basic type 'FIDCCP02'.
I'm getting error that packed fields are not permitted.
I'm getting Ensure field sequence is correct for data for mutiple source structures.
Source Structures
 HEADER_STRUCT G/L Account Document Header
 LINE_STRUCT G/L Account Document Line
Source Fields
 HEADER_STRUCT G/L Account Document Header
 BKTXT C(025) Document Header Text
 BLART C(002) Document Type
 BLDAT DYMD(008) Document Date
 BUDAT DYMD(008) Posting Date
 KURSF C(009) Exchange rate
 WAERS C(005) Currency
 WWERT DYMD(008) Translation Date
 XBLNR C(016) Reference
 LINE_STRUCT G/L Account Document Line
 AUFNR C(012) Order
 HKONT C(010) G/L Account
 KOSTL C(010) Cost Center
 MEINS C(003) Base Unit of Measure
 MENGE C(013) Quantity
 PRCTR C(010) Profit Center
 SGTXT C(050) Text
 SHKZG C(001) Debit/Credit Ind.
 WRBTR AMT3(013) Amount
I have changed PAC3 field for caracters fields of same length to avoid erreur message of no packed fields allowed.
Structure Relations
 E1FIKPF FI Document Header (BKPF) <<<< HEADER_STRUCT G/L Account Document Header
 Select Target Structure E1FIKPF .
 E1FISEG FI Document Item (BSEG) <<<< LINE_STRUCT G/L Account Document Line
 E1FISE2 FI Document Item, Second Part of E1FISEG (BSEG)
 E1FINBU FI Subsidiary Ledger (FI-AP-AR) (BSEG)
 E1FISEC CPD Customer/Vendor (BSEC)
 E1FISET FI Tax Data (BSET)
 E1FIXWT Extended Withholding Tax (WITH_ITEM)
Files
 Legacy Data On the PC (Frontend)
 File to read GL Account info c:\GL_Account.txt
 Data for Multiple Source Structures (Sequential Files)
 Separator Tabulator
 Field Names at Start of File
 Field Order Matches Source Structure Definition
 With Record End Indicator (Text File)
 Code Page ASCII
 Legacy Data On the R/3 server (application server)
 Imported Data File for Imported Data (Application Server)
 Imported Data c:\SYNERGO_CREATE_LCNA_FI_GLDOC_CREATE.lsmw.read
 Converted Data File for Converted Data (Application Server)
 Converted Data c:\SYNERGO_LCNA_FI_GLDOC_CREATE.lsmw.conv
 Wildcard Value Value for Wildcard '*' in File Name
Source Structures and Files
 HEADER_STRUCT G/L Account Document Header
 File to read GL Account info c:\GL_Account.txt
 LINE_STRUCT G/L Account Document Line
 File to read GL Account info c:\GL_Account.txt
File content:
Document Header Text Document Type Document Date Posting Date Exchange rate Currency Translation Date Reference
G/L Account document SA 20080401 20080409 1.05 CAD 20080409 Reference
Order G/L Account Cost Center Base Unit of Measure Quantity Profit Center Text Debit/Credit Ind. Amount
 44000022 1040 Line item text 1 H 250
 60105M01 13431 TO 10 Line item text 2 S 150
800000 60105M01 Line item text 3 S 100
 60110P01 6617 H 40 Line item text 4 S 600
 44000022 ACIBRAM Line item text 5 H 600
The file structure is as follow
Header titles
Header info
Line titles
Line1 info
Line2 info
Line3 info
Line4 info
Line5 info
Could someone direct me in the wright direction?
Thank you in advance!
Curtis

Hi,
Thank you so much for yout reply.
For example
i have VBAK(Heder structure)
 VBAP( Item Structure)
My file should be like this i think
Identification content Fieldnames
 H VBELN ERDAT ERNAM
 Fieldvalues for header
 H 1000 20080703 swapna
Identification content Fieldnames
 I VBELP AUART
 Fieldvalues for item
 I 001 OR
 002 OR
Is this format is correct.
Let me know whether i am correct or not

Reimporting Target and Source structures

Similar Messages

Maybe you are looking for