Rejected book order

I am a complete beginner to all this but can anyone help me!
I experienced huge problems uploading..it got stuck at 0% for hours so I finally rebooted, once I had managed to get out of Aperture, and then it all worked fine.
However, I have now received an email saying there was a problem with the upload and that this may be because my matter is either unreadable to unprintable due to the quality. The email from Apple said it could be due to one of the following:
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue. I have checked this and it seems it all went through fine
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files. I have just added more RAM so unlikely
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.
What the heck does all this mean?! I am using jpegs from a Canon Eos and am baffled how I check to see if this is the problem.
All ideas greatefully received as this is my first order and am desperate to get going as in principle I adore this concept.
Thank you and apolgies for the waffle!

2. Low Disk Space. If your computer is running on low
disk space, your files may be assembled incorrectly.
Create more space by deleting unused files. I have
just added more RAM so unlikely
More RAM would not solve a disk space problem. If your hard disk is nearly full, Aperture may not be able to create all of the files it needs for the book. More RAM would help in the processing of the files but not in the storage (or temporary storage) that Aperture might need for the book files. You may be in a situation where Aperture creates a bunch of temporary files, bumps into a disk limit, and then tries to send some corrupted files. After transmitting, the files might be deleted but there is some instant in time where the available space on your hard disk gets consumed.
Dual 2.5GHz, 5GB +1.6GHz 15" PB Mac OS X (10.4.3)

Similar Messages

Accurate OM booked orders report

My objective is to develop a Booked Orders Report in Discoverer and I'm pretty new to Discoverer 10g.
My logic to property display the records is -- for each order in OM that header status is booked, determine if ANY lines are still open by looking at the Open Flag and if any line is still open, display all lines associated with that order.
example: SO# 100 has 4 lines where line 1 is open awaiting shipping (open_flag = 'Yes') and other 3 are closed (open_flag = 'No').
maybe I'm going about this the long way so if you know a cleaner way, please share....
The best logic in discoverer that I can come up with (based on the various line status fields) is that I can build a new calculation called l_open_flag that is setup as CASE WHEN "Order Lines".Open Flag = 'Yes' THEN '1' ELSE '0' and when I run the discoverer report, the l_open_flag is working and returning 1 or 0 as expected for each line.
The next step is to setup a second calculation to sum the l_open_flag called sum_l_open_flag and add a second non-display parameter to display any order where header level status is 'booked' and the sum_l_open_flag > 0.
the problem is that when I try to sum l_open_flag discoverer throws up a warning that I'm combining detail data point and an aggregated data point -- which I agree.
After adding the new condition to include orders where sum_l_open_flag > 0, I still only get just the one line item out of the 4 lines on the order that is still open.
Hope this is clear like oracle and thanks,
Rob

Hi rob,
From your example i understood is if open_flag=Yes it is open and when No then it is closed.Your going in the right path by taking the case as you mentioned.
But why are you taking the second condition sum(l_open_flag).definately it will throw warning.Why do you need this condition?Can you be clearer
I sugest you take a second calculation as calculation2=l_open_flag>0,this suggests that when you are giving zero(0) it says that you want all closed sales orders.
Anything more can you give more explanation.
Best Wishes,
Kranthi.

How to set product Id for event booking order?

We take paid bookings for a number of events through the year. Since the event booking information is identical for every event (only the event details change), we have implemented this by embedding the HTML from a standardised web form into each event's details section.
However, when the event booking is submitted by the customer, Business Catalyst creates a product whose name is constructed as {form name}/{event name} to correspond to this event. This product is referenced in the CRM order for this event that is linked to the customer. This means we get a separate product for each event type.
The problem is that the product code that is assigned to the event booking product is the ID of the web form that was used to process the event (ie. the form embedded in the event detail). Since we use the same web form for multiple events we are now seeing duplicate product codes.
I would like to create a common product for all event bookings and pass this product ID when posting the form on submit of the event booking. The reason for a single booking product is to simplify the synchronisation to our accounting system - otherwise we need to create a new product in the accounting system every time we add a new event.
Is there a query parameter I can include on the form's action URL or as an input field to the form that controls the product ID and / or the product name that will be used for the booking order?
The only other solution I can think of to solve this challenge is to create a unique web form - event combination for every single event. This is not a great solution due to the unnecessary duplication that this will involve - I would rather re-use a common piece of code.
Thanks for any help and advice.

Hello
If I'm not mistaken, the 'text range' in PowerPoint does not have 'language id' property whereas the 'text range' in Word does.
Check the terminology dictionary of PowerPoint.
cf.
http://www.microsoft.com/mac/developers/default.mspx
Sorry for the bad news...
H

How to troubleshoot approval workflow of a rejected purchase order

Hi,
We are working in oracle applications 11i.
I have a purchase order with status rejected that has hanged up in the system. The user rejected PO and the document has not been transferred to the PO buyer. From the application forms -> Forward documents window, I can see that neither the user who rejected or the buyer has the document.
From System Administrator responsibility I can see that the workflow administrator can modify a PO that is only IN PROCESS,
what shall I do?

please check :
http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/how-to-troubleshoot-approval-workflow-of-a-rejected-purchase-order-4211332

List of rejected sales order with quantity and value

Hi,
Is it possible to get the report from VA05 for the list of rejected items with value and quantity ?
Pls help
Thanks,
Vijesh

Dear Vijesh,
VA05 I believe is a very powerful report for doing analysis at order and line item level. If your rejection criterion includes a rejection reason at line item level, yes this list from VA05 can give rejected Sales Orders with Quantity and Value. See the screen shot below.
I selected a list with open dates till date, I can see Sales Order number, Sales Document Type, Item Number, Material, Rejection reason, Quantity at line item level and net price.
However, I am not sure what is the rejection criterion you use in your business and I am not sure if you use rejection reason and hence I would like to hear from you, if this explanation helps you.
Thanks
Nagaraj

Low budget image proofing for iPhoto book order

Hello!
I want to prepare my photos the best I can for iPhoto book ordering (Christmas present for family).
I have a Dell U2711 attached to a Mac Mini running OS X 10.6.8 and iPhoto '11 9.2.1. and a Canon Selphy CP520 dye sub printer which I thought to use as a precheck of what my JPG sRGB images would look like when printed in a book.
Here's my headache:
If I set up the monitor and calibrate the display profile as suggested in post #1 under this thread then such setup makes me color correct the photos by RADICALLY pushing the midtone slider in the levels adjustments to the left (brightening the picture). Prints that come out of the Selphy under this setup are a perfect match to what I see on the monitor and that is wonderful. However, I hesitate to order a book using such images because they appear far too bright on an iMac for example. (Perhaps I should mention that Google logo in Safari looks like its on steroids in this setup).
On the other hand, if I set up the monitor as it came from factory (PC gamma, standard preset), and use the default DELL U2711 display profile in SystemPreferences, then pictures look relatively ok on screen without any radical color correction. But prints that come out of Selphy with this setup don't match what is on the display, prints are too dark, and again I hesitate to order a book with such images.
Any suggestions?
Thanks.
Mato

Yes - don't try so hard and use your Mac and iPhoto - not a PC
iPhoto is designed as a consumre level program for point and shoot comeras - many people (including me) report excellent results using it that way - load sRGB photos form a digital camera and do minimal processing on them - never do major color adjustments - using iPhoto - preview rthe book -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
and order
Apples comments on this are here
Of the negative comments posted here nearly all of them were from people who spend lots of time and energy adjusting photos trying to second guess the printing process and failing to do so - Apple does have an unconditional sastisfaction guarentee - do it the simple way - less is more in this case
LN

Rejected purchase order

Hi Gurus,
Let me know how to extract all rejected purchase order in the standard report ?
hoping your answer.
Regards,
Marina

HI,
i am not sure about your rejection concept
but if you want Po report for deletion item
then try following
go in ME2N,select dynamic selection icon and click on Purchasing item and select deletion indicator and give L there
same thing in ME80FN also
Regards
Kailas Ugale

BAPI to Reject purchase order

Hi All
Kindly let us know if there is any BAPI to Reject purchase order (ME29N)
Thanks

Hi,
Try this,
BAPI_PO_RELEASE
see the below link for more help.
Re: BAPI to reject PO (like ME29N functionality to reject PO)
Regards,
Vijay

Reject Purchase order using abap OO class CL_PO_HEADER_HANDLE_MM

Hi all,
We have created a webdynpro application for maintaining purchase
order by using class CL_PO_HEADER_HANDLE_MM.
With this class we are able to release (method RELEASESTATE_MM~RELEASE) or cancel release..
We are trying, in vain, to reject purchase order by using method IF_RELEASABLE_MM~REJECT
even if sy-subrc eq 0 .
any idea ?
thanks.

Hello
Have you had a look whether you can reject the PO at all using method
IF_RELEASABLE_MM~IS_REJECTION_ALLOWED
Regards
Uwe

Unable to complete photo book order on ipad

Hi, I hope this is the right place to get some help. Regarding placing an iphoto photo book order on an ipad.
I have been working on a photo book project for a long time, and want to finally order some copies of the book. Everything has worked fine, except that I get a message that I have some clipped text that may be exceeding its boundaries. I can't figure out where this is, no warning triangles are showing, so I choose to proceed with the order anyway. The next page is black/dark grey with a small icon of the front page of the photo book, and it says "done" ("ferdig" in Norwegian) on top. I can click on some words in blue writing on the top right of the page, "add delivery address" (in Norwegian). When I try to type somehing in there, nothing happens.
Aaargh, this is so frustrating! I have checked that my address and credit card info is valid, in my apple id-account(itunes).
Shouldn't there be some uploading of the album? And a choice of how many copies etc I want? I have checked my email and there are no order confirmations, so I apparently havent placed an order yet, despite the "done"/"ferdig" on top of the page.
Does this sound familiar to anyone? What can I do?

Hey there Nyibyen,
It sounds like you are unable to purchase a project youve been working on for a good long while, but the order process is not working as expected. I would start by verifying you have Express Checkout enabled in your Account Settings when you are at http://store.apple.com, with this info:
You can review or edit your express checkout settings by accessing the Account section from the main navigation bar. Sign-in with your Apple ID and password to view your account settings. Click on the Edit button if you wish to edit your shipping address or payment method. You can also enable or disable the express checkout feature for this computer by moving the slider to the respective position.
From: Express Checkout
http://store.apple.com/us/help/express_checkout_faq
If so and your other billing info is correct, quit all the running apps on the iPad:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue is still unresolved, try resetting your network settings and attempting the order again.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
From: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thank you for using Apple Support Communities.
Take care,
Sterling

TS2516 an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

This user talked to Apple Support personnel and confirms what Larry is suggesting:
crowland1066
Re: book upload fails
Nov 30, 2013 3:02 PM (in response to pablo123)
Just got off the phone with apple support. If the photo book completes the assembly process but fails during the upload process the problem is in their overloaded servers.They just started a free shipping promotion for the holidays which has increased the traffic dramatically. I bought a calendar a week ago and it went right through. I'm going to try again during less peak times.
Happy Holidays

Iphoto book order cancelled - Totally dissatisfying customer service

This message to alert you that Apple might cancel your iPhoto book order for no reason !
This is what just happened to me, leaving me in a totally dissatisfying and frustrating situation, as I did everything to have this book in time for Christmas, had to go through over an hour on the helpline with Customer Services, whose agents are badly informed on the solutions that they can offer you when such mistakes happen ---
I ordered an iphoto book on December 14, in order to have it in time for Christmas.
Nothing was reported wrong or erroneous when I placed the order and uploaded the book. Two days later, Apple cancelled my order without any notification sent to me. I have only learned about it on December 21, worried that my book had not arrived yet. I checked online about my order status, which then said "order cancelled". No explanation why. I waited for Monday December 23 in order to be able to talk from someone at Customer Services. I was then told that my order had been cancelled because one picture and text was overlapping, but they could not tell me exactly which one. It was then suggested to me that I should replace the same order and call back so that they could accelerate the process.
I placed the order and sent the exact same book to Apple again and then called back. Another assistant from Customer Services advised me that there was nothing they could do in order to accelerate the printing and delivery process. All they COULD HAVE offered me was 15% discount, which the first assistant did not mention and which now was too late for me to benefit from since I had already placed the order. Also, I was told that my exact same order did not produce any issue for printing, so that the first cancellation was in fact made without any reason.
This leaves me with the following situation: Although I have placed my first order in time for it to arrive before Christmas, I end up with no Christmas present, over an hour lost on the phone with customer services, no discount, no accelerated printing or delivery process or any other gesture in order for my infuriating situation to be less so, and a photo book that will arrive in early January when I will have already left my family to work abroad again.
I am entirely dissatisfied with the quality of the Apple iphoto book service and Apple customer services. I have not obtained any help or remedy from your customer services although several mistakes had been made on their side.
You are well advised to consider alternatives before spending hours on creating an iphoto book...

Anne, that is really outragious. And I cannot understand why the support did nothing to rectify their mistake and help you to get your book printed in time.The support teams at the Print Products Stores probably will not read these these Forums, these are user-to-user discussions. So, to make Apple listen to your justified complaint, use the feedback form.
http://www.apple.com/feedback/iphoto.html

Iphoto Book ordering problems

After 3 weeks of constant attempts I feel I need to see if anyone out there has a thought on why I receive a return email from my book order "Problems with your order - you have not been charged etc etc"
I have done everything possible from deleting photos, trying EVERY theme, deleting maps, background photos. I have corresponded by email with the Apple help, and I have spent about an hour at the Genius Bar at Apple to see if anyone can solve my problem. Everyone has comeback with "we don't know"
I work with a MacBook Pro Mac OS X 10.6.4, have plenty of memory, all software is up to date.
I am just about to reinitialise my hard disk, install iLife 11 and make the book again, as I can see no other way to try to get this book ordered. Hopefully, oh every so hopefully this will solve my problem.
Any guru help?

Since yesterday there have been many reports from all over the world of people unable to buy a book or any print products from Apple.
Apple has to fix this on the servers.
See for example this link: Re: Trying to buy book I created. When I hit "checkout" nothing happens. It's not like Apple to not want to make more m…

Editing of Rejected Purchase Order

Hi all,
I have 2 inquiry with regards to rejected purchase order (status "Release Indicator" in transaction code "me22n"-change purchase order).
1. What is the standard operating procedures (suggested by SAP) with regards to editing of rejected PO?
2. Where can I check (in transaction code "spro") if I want to limit the editing of rejected PO?
Scenario:
In my company, PO that was rejected is still modifiable; especially on the financial value. This result in the re-trigger of work-flow and subsequently lead to the restart of release strategy.
I'm to believe that PO that was rejected will remain in "read-only" mode until approval reverse his/her rejection. Thus, I find this scenario abit odd; and wishes to seek advice and suggestion on the SOP and where I can check the configurations for my current company.
Thank you,
Regards

Dear Sek Yao Ooi,
I will suggest you to see SAP note 751129 for more details. In external purchasing documents, following objects are checked.
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
An I regret for a mistake. Activity type is 09 not 08, as I wrote.
This note would give you details.
Activities are these
01 Create or generate
02 Change
03 Display
08 Display change documents
09 Display prices
- Sanjeev

Rejected Sales order reuse.

Dear Friends,
I have rejected a Sales order by maintaining reason for Rejection at Document Level and the order is completely rejected. Now system still allows me to reuse the rejected sales order by clearing the "Reason for rejection at Item level". The status of the sales order become "open" Once I clear the blockage.
My requirement is to block from the further use/change after rejecting the Sales order.
Can somebody leave your inputs.
with regards,
S.Dayanand

I have two suggestions:
1. If you want restrict particular Users from changeing the Reason for Rejection, then create a Transaction Variant & manage the Authorizations. (This is with assumption that User entering the Reason for Rejection & re-changing it are different).
2. User Exit - Write a ABAP code in User Exit - USER_EXIT_SAVE_DOCUMENT which will check whether Reason for Rejection is already present, then it will not allow to change the same.
Hope this helps,
Jignesh Mehta

Rejected book order

Similar Messages

Maybe you are looking for