Relationship between campaign code and BP Address

Hi all,
I am new to CRM. I want to know the relationship between campaign code and BP Address.
Or how it links with GUID.
Small query but full points.
Thanks
Sanket

Hi,
The field name for Camapign code is
CRM_MKTPL_CAMPAIGN-SHORTCUT
and for BP address
COM_DYNP_PARTNER_UI-SHORT_WITH_STREET.
Thanks
Sanket

Similar Messages

Can you tell me relationship between company code and shipping document

how to make the relationship between shipping document with company code .
i have selection criteria which having company code and shipping no.
but i am not able to make relationship, so please find and tell me the relationship table structure
Regards,
Siva

Hi Siva,
Read table TVKO to get the sales organizations (field VKORG) for the company code (BUKRS). This query might result into multiple VKORG entries.
Read deliveries (LIKP) with VKORG as input to get all deliveries for the sales organziation.
Regards,
Frank Umans

Relationship between material type and industry sector

Hi experts
when using t-code mm01,there are two fields material type and industry setor in screen.Is there any relationship between material type and industry sector? I want to know if user be able to see the material type related to particular industry sector?
thanks in advance!

Hello
There is no direct relationship between the material type and the industry sector.
The industry sector is used only for field sttus maintenance (fields in display/optional/requierd entry) in transactions.
We will assign seperate field reference groups to industry sectors and deopending on how we configure the field references, the fields will appear for the materials created for that industry sector.
regards

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

The relationship between production order and purchase requistion After running MPS

Dear Experts:
I met a issue . My users want to know the relationship between production order and purchase requistion . In my company we create production order and purchase req. by running MRP. our operations are:
1. T-CODE: MD41 create planned order .
2. T-CODE: CO41 convert planned order to production order .
3. T-CODE: MD15 convert planned order to purchase Requisition.
but I can't find the relation of them. would you like to give me some advices? thank you very much.

Hello
On the standard MTS process there is no link between the requirement (STO) and the replenishment element (production order).
See the below extraction from note 12955:
There is no index that the system could use to determine which issue element (sales order, planning, reservation, dependent requirement, ...) is covered by a certain receipt element (purchase order, production order, purchase requisition, planned order, stock level ...).
A production order, for example, can be created to cover several different requirements, even when you are using lot sizing procedure EX.
You can use transaction MD09 or MD04to determine the pegged requirements, but they are calculated dynamically and there is not fixed link between requirement and receipt.
BR
Caetano

Relationship between logical system and a client

Hi,
Our internal notes say that, in order to create a new client, I must do the following:
1. Create a logical system using BD54. The client name must be SID + "CLNT" + number. In my case, this would be NSPCLNT100.
2. Create a client using SCC4.
Questions:
1. What is the relationship between the client and the logical system?
2. How does SAP know that client number 100 must be related to NSPCLNT100? I am not specifying this relationship anywhere.
Thank you in advance for your help.
Regards,
Peter

you assing logical system to a client from SCC4

Question the relationship between AR invoice and Outgoing payment

Dear All,
Does anyone the know the the relationship between AR invoice and Outgoing payment? because I would like to print the report in specific date range. For example, today is 02 July 2009. I want to print "AR invoice as at 31 Mar 2009", by using SQL. It seems like date back.
From Samson

Hi Samson,
Even i haven't done much r n d bout this but what i came to know is that, there might be a scenario where you may want to make a payment to your customer. In this case we can use the Outgoing payment for the same. The system doesnt stop you from doin so. I have seen this in SAP B1 2005B, PL34.
Regards,
Joseph

In which table we can find the relationship between Role id and Task id

Hi Experts,
In which table we can find the relationship between Role id and Task id in Cprojects.
Thanks
Subhaskar

Hi Subhaskar,
Apart from DPR_ENTITY_LINK , you can also get it from table DPR_PART.
Please go through the below link
http://wiki.sdn.sap.com/wiki/display/PLM/cProjectstablesin+SAP
I hope this will help you.
Regards,
Rahul

Where can I find the relation between company code and plant?

where can I find the relation between company code and plant?
I need to the list of plants under a company code.
Which table?

yes,wayne weng .What you said is right.
Thank you very much!
My MSN:[email protected]

Table name having relationship between Business area and Profit Center

Hi guys,
Can you tell me the table name showing the relationship between Business area and Profit Center in fb60 transaction.
thnx
hema

HI.
BSEE u2013GSBER Business area.
BSID-PRCTR Profit center
Regards.
jay

Diff. between Tax Code and Condition Types

Hi,
What is the diff. between Tax Code and Condition Type???
Why we maintain Tax Codes under Invoice Tab in PO, when Condition Types are available for Calculation Procedure...???
Please guide..

hi..
Tax code : Tax code in some what more specific for calculating the tax...some material is having 2% tax..some having 3 % tax..etc..and these are input tax...so..these tax code will be of type input tax..
now..based on the nature of tax type amount will be calculated....
suppose tax code is calculation of 2 condtion type so ..we can do it in tax code conditon record fv11 also..
so..tax code can be a combination of cond type...
where as through cond type also we can also achieve this..by using one statistical cond type...
Cond Type : cond type is for the daily pricing configuration..how system will calculate the price for a centain material we can make define the rules here...
Try this out..
Thans

How would i design the relationship between "question", "subquestion", and "answer"

Hi all. Consider the following scenario:
Scenario:
A Question has an Answer, but some Questions have Subquestions. For example:
1. Define the following terms: (Question)
a) Object (1 marks) (Subquestion)
An instance of a class. (Answer)
b) ...
2. Differentiate between a constructor and a destructor (2 marks)
(Question)
A constructor constructs while a destructor destroys.
(Answer)
Question:
I want to model Questions, Subquestion, and Answer as Entities with relationships/associations, preferably binary relationships as i feel ternary relationships will be problematic while programming. Any suggestion on how i would
go about this?
There is never infinite resources.
For the Question Entity, a question has the attributes "QuestionPhrase <String>", "Diagram<Binary>", and "Marks
<Decimal>".
For the SubQuestion Entity, a subquestion has the attributes "SubQuestionPhrase <String>", "Diagram<Binary>", and "Marks <Decimal>".
For the Answer Entity, an answer has attributes, "AnswerPhrase<String>", "Diagram <Binary>"

Yes. I am in .Net. I sure do hope i did not ask in the wrong forum. :-|
Hi KCWamuti,
If you need to design the relationship between Question table and Answer table in SQL Server, as Uri’s and Visakh’s posts, you can create the foreign key to establish relationship between tables, and use join in query to get your desired result. For more
information about JOIN in SQL Server, please review this article:
Different Types of SQL Joins.
However, if you need to model Questions, Subquestion, and Answer as Entities in .Net, then the issue regards data platform development. I suggest you post the question in the Data Platform Development forums at
http://social.msdn.microsoft.com/Forums/en-US/home?category=dataplatformdev . It is appropriate and more experts will assist you.
Thanks,
Lydia Zhang

Relationship between Role id and Task id table name?

Hi
In which table we can find the relationship between Role id and Task id in saphcm
Thanks a
vibin

Hi,
HRP1001 --Infotype 1001 DB Table (Relationships)
Regards,
mohammed

A table mapping between country code and currency code

Hi experts,
I want to know whether there is a table mapping between country code and currency code.I have found the table T005(Countries).But I don't why the filed of WAERS(Country currency) hasn't maintained in talbe T005?Whether country code and currency code hasn't direct relation?
Regards,
Kelvin

Dear Kelvin
The said field (WAERS) can be fetched from many tables. To name a few, below are some of the tables in which, you can see the field for currency.
1) BKKI4
2) BKKI5
3) BWPOS
4) KNKA
5) KNVV
6) MSEG
thanks
G. Lakshmipathi

Relationship between campaign code and BP Address

Similar Messages

Maybe you are looking for