Release in JBuilder

Hello!
I would like to ask if there is something like Release configuration (of visual studio) in JBuilder!
Thank you in advance for your time and response!
Athina

Well, in visual studio there is the option of debug
configuration (in compiling, building and running
process)
for testing and correcting your code, and also the
option of relese configuration when you want to run
your
application and get results. The running under
release version is much faster (even 1/3 of debug
version time).That's normal.
So, I was wondering if there is something like that
in JBuilder. I've searched in JBuilder help, but with
no luck :( Did you notice there's a button "run" and a button "debug"? Green arrows to the top. "Release" certainly isn't a normal term for simply running an app.

Similar Messages

The manner that JBuilder names for ejb isn't seem canon

below is JBuilder auto produce
abstract public class LockerBean implements EntityBean{
public interface LockerHome extends javax.ejb.EJBLocalHome {
........} //"LockerHome" should correct "LockerLocalHome"
public interface LockerRemote extends javax.ejb.EJBObject {
...........}//"LockerRemote"should correct "Locker"
public interface LockerRemoteHome extends javax.ejb.EJBHome {
............}//"LockerRemoteHome"should correct "LockerHome"
but book says
remote interface names:<bean-name>Home
local interface:<bean-name>LocalHome
remote bean interface:<bean-name>
local bean interface<bean-name>Local
implementation classes:<bean-name>EJB
I have never seen <bean-name>Remote and <bean-name>RemoteHome
but JBuilder can compiler and run above class! why

From a compilation perspective,
It does not matter what you call the interfaces. You could call them larry, moe and curly for the different home interfaces.
All that matters is that they are indicated properly in the descriptors and used appropriately in the code.
Of course from a readability, usablility and maintainability perspective, use appropriate names.
What JBuilder does is a standard for JBuilder. (I think specifically the release of JBuilder you have)
It need not match what is there in your book.
Vijay

Compiling release mode in JBuilder

I have an applet running perfectly in JBuilder. When I try to deploy it in an htmla page(with the classes in the same file) I am getting a missing JApplet message. I think it has to do with that JBuilder is compiling it in debug mode so it is not including all the necessary classes needed if you wanted to compile it. I thinks what needs to happen is that you need to switch the build option from debug build to release build. Does anyone know how to do this in JBuilder?

I don't think JBuilder has the concept of 'release' versus 'debug' .. it has a few compiler settings to select which debug options you want in your class files, but they only affect how the classes are built, not what classes are built.
Are htmla files anything to do with IE? If they are, then chances are you're using <applet> instead of the Java Plugin, and it can't find the entire javax.swing package.

[SOLVED] can't install jbuilder

Hello!
When I try to install JBuilder 2005 I get:
[antek@arch jb2005_linux]$ ./install.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.7094/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
although all the libs he is complaining about are in my /libs dir. . .
I get similar errors when I try to install JBuilder 2006.
Anybody knows how to solve this? Or maybe older versions of JBuilder work better?

You're right. This is whole part of install.bin containing LD_ASSUME_KERNEL commands:
# set this variable to something so we're guaranteed a value
linux_LD_ASSUME_KERNEL_hack=0;
# work around problem on RedHat Linux 7.1 IA-32
# see Bug Id 4447270 at Sun JDC bug parade
if [ `cat /etc/redhat-release 2>/dev/null | grep "7.1" | wc -l` = "1" ];
then
if [ `uname -s` = "Linux" ];
then
if [ `uname -m` != "ia64" ];
then
case `uname -r` in
2.[456]*)
linux_LD_ASSUME_KERNEL_hack=1
esac
fi
fi
fi
# LD_ASSUME_KERNEL for Native POSIX Threading Library on some Linux distros
if [ `uname` = "Linux" ]; then
debugOut "checking for NPTL + JVM vulernability..."
#check libc to see if it was compiled with NPTL
nptl="`strings /lib/libc.so.6 | grep -i nptl`"
if [ "$nptl" ]; then
debugOut "NPTL detected! checking for vulnerable JVM....";
# I have to set this before I check the JVM version, a-cuz
# the call will hang, if it -is- vulnerable!
export LD_ASSUME_KERNEL=2.2.5
eval `$actvm -version 2>&1 | $AWK '
BEGIN {
vendor="Sun"
/"[0-9].[0-9].[0-9][^"]*"$/ {
gsub ("["]", "", $3)
split ($3, ver, "[._-]")
printf "v_major=%snv_minor=%snv_patch=%sn",ver[1],ver[2],ver[3]
/IBM/ {
vendor="IBM"
END {
printf "v_vendor=%sn",vendor
' `
# unset the LD_ASSUME_KERNEL in cause we don't need it
unset LD_ASSUME_KERNEL
debugOut "major : ${v_major}"
debugOut "minor : ${v_minor}"
debugOut "patch : ${v_patch}"
debugOut "vendor: ${v_vendor}"
# check our rules for setting LD_ASSUME_KERNEL
# currently, we're only setting this for JVMS < 1.4
# we can add more rules later, if we need to.
if [ ${v_minor:-0} -lt 4 ]; then
debugOut "Vulnerable JVM detected... implementing workaround"
linux_LD_ASSUME_KERNEL_hack=1
else
debugOut "Your JVM is OK! Congratulations!"
fi
fi
fi
if [ $linux_LD_ASSUME_KERNEL_hack -eq 1 ]; then
LD_ASSUME_KERNEL=2.2.5
export LD_ASSUME_KERNEL
fi
I tried to comment the line export LD_ASSUME_KERNEL=2.2.5, but then installer gave me following errors:
[antek@arch jb2005_linux]$ ./install.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
gzip: /tmp/install.dir.9748/Linux/resource/vm.tar.Z: corrupt input. Use zcat to recover some data.
uncompress: /tmp/install.dir.9748/Linux/resource/vm.tar.Z: corrupt input. Use zcat to recover some data.
gzip: /tmp/install.dir.9748/Linux/resource/vm.tar.Z: corrupt input. Use zcat to recover some data.
The included VM could not be uncompressed (GZIP/UNCOMPRESS). Please try to
download the installer again and make sure that you download using 'binary'
mode. Please do not attempt to install this currently downloaded copy.
I get similar errors after I uncommented back that line... Does it mean the installation file cannot be edited? It is 100 MB file with long script at the beginning and binary stuff after it. I have no experience with things like this... what to do?

CMP 2 non mandatory timestamp field in Oracle 9 release 2

Dears,
My machine holds the following:
Win XP pro SP 1
Oracle 9i release 2 DB
Jbuilder X enterprise Edition with SUN ONE App Server plugin
SUN ONE Application server platform edition update 2
They are all in the same machine (so there is no problem as issue 4707531 of using different Oracle drivers)
I connect using OCI not thin.
I got the following problem when trying to test my Session EJB that calls CMP.
SEVERE ( 4716): EJB5071: Some remote or transactional roll back exception occurredcom.sun.jdo.api.persistence.support.JDODataStoreException: Got a JDBC SQLException.
Please read the remaining error stack for more information.
NestedException: java.sql.SQLException: Invalid column typeBy tracing the problem I noticed that my code works fine if I set a timestamp field in this table, this timestamp is not mandatory.
Is it a bug in SUN ONE with Oracle 9i, or anyone have a solution?

Hi Ash,
Could you please verify that your .dbschmea file and table creation scripts are in sync. The easiest way to achieve this is to recapture the .dbschema file, repackage and redeploy.
Thanks,
Mitesh

How to deploy ejb in an Enterprise Environment using the jbuilder plugin

Hello:
I use Oracle9iAS Plug-in Release 2 (9.0.2) for Borland JBuilder 7 to deploy my ejb. But now, i would like to deploy my ejb to oc4j in an Enterprise Environment (not as standalone).
Does anybody know how can i do it? I noted that the plugin use admin.jar to deploy ejb, and I suppose it need to use dcmctl.
Thank you
Sergio

Sergio,
The current release of Borland JBuilder only allows you to deploy to standalone OC4J. If you want to deploy to Oracle9iAS (Enterprise OC4J), please try Oracle9i JDeveloper 9.0.3:
http://otn.oracle.com/software/products/jdev/content.html
JDeveloper 9.0.3 uses DCM to deploy to Oracle9iAS
Regards,
Chen.

Weblogic 10.0 jbuilder 2007

hi, can someone guide me how to configure weblogic server 10 for jbuilder 2007? is it possible?
i tried installing BEA WebLogic? Server Tools but no much help..
thanks in advance

Workshop for WebLogic 10.0 does not support 3.2.2/1.5.4. The upcoming 10.1 release of Workshop will support those versions exactly.
-Chris

Which JBuilder version to work with Oracle BPEL?

Hi, Im very new to Oracle Bpel.I just started yesterday. Could you please tell me which version of Jbuilder has to be installed and links from which i can dowload.
Thank you.
user11269341

Welcome to Oracle BPEL!
You may use a Oracle JDeveloper 10g Release 3 (10.1.3.3) from the following link.
http://www.oracle.com/technology/software/products/ias/index.html
That should be fine for the SOA Suite 10.1.3.3 which is also available from the same link (Oracle Application Server 10g Rel3 10.1.3).
hope that helps!
AMN

Some masters in jbuilder there?

Hi!
I have finnish a project and want to realease it, but every time i leave the JBuilder enviroment i got error that classes want work, becuse the missing some class
E:\SAVE\PUFF\JEditor\release>java jeditor.JEditor
Exception in thread "main" java.lang.NoClassDefFoundError: sun/tools/java/Consta
nts
at jeditor.Token.<clinit>(Token.java:184)
at jeditor.JavaContext.<init>(JavaContext.java:51)
at jeditor.JavaEditorKit.getStylePreferences (JavaEditorKit.java:42)
This does not happend when i work in jbuilder, then it works fine, this only appear when i change computer and running from commandline. Offcourse i get all the class files from project.
In someway must jbuilder have some class that i dont have in usal jdk?
plz help me
ps . i wont get it to work with i jar file either. ds

Sounds like a combination of not including resources / setting the classpath. The best way to release is to use the JAR wizard, and make sure you are including all the resources needed in the jar. JBuilder should automatically add the appropriate classpath information to the manifest.
When you've created the JAR, open it it up in WinZip or equivalent to check that it includes everything you were expecting.
Hope this helps.--
<sig> http://www.itswalky.com http://www.crfh.net </sig>

Now available - Sun ONE AppServer 7, Plugin for JBuilder 8

I am pleased to announce that Sun ONE Application Server 7, Plugin for JBuilder 8 is now available for public download. This technology integrates JBuilder 8 with the Sun ONE Application Server runtime environment to provide a fully-automated development experience. The Plugin enables J2EE developers to take full advantage of productivity enhancements provided by JBuilder. The Plugin is a technology provided by Sun for developer convenience. Sun will provide limited support on this technology.
The User Guide included in the download describes the capabilities and steps to use the Plugin for JBuilder 8. To use, uncompress the JAR file into the JBuilder 8 root install directory.
Note: Fee-based, guaranteed, technical support for the JBuilder Plugin is provided by Developer Technical Support. For community support, please visit Sun Software Forum on AppServer IDE.
You can download a copy from:
http://wwws.sun.com/software/download/products/3ed3e01f.html

I am running JBuilder 9 Enterprise. Would you be able to give the code for this plugin so that I could configure it for 9, then give it back for the community use? Or could you make the neccessary changes for 9 and release the plugin?

Is there plug-in for JBuilder developing Weblogic web application?

Is there plug-in for JBuilder developing Weblogic web application?
thanks in advance
woodsonli

Firefox 3.03 - why such an old version? 3.6.12 is the most recent release.
It is up to Microsoft to fix Outlook Web Access to work with Firefox or to come up with a plugin for Firefox. If Mozilla was to start fixing or write plugins for all the software out there that is made to work with Internet Explorer and not any other browser, they wouldn't have time to work on Firefox.
There are two Firefox extensions that will open IE in a Firefox tab. Many users install one of these addons to get around problems like you are having with Outlook Web Access.
IE Tab2
https://addons.mozilla.org/en-US/firefox/addon/92382
IE Tab Plus
https://addons.mozilla.org/en-US/firefox/addon/52809/

[b]Eclipse'[/b]s lightweight vs [b]JBuilder[/b]'s power

There are a lot of people that say Eclipse is better than JBuilder.
I know its free, but if we forget about this, are there weak sides of JBuilder that Eclipse can be good seen at?
I've been used JBuilder as IDE all the time i work. Last week tried Eclipse. The two things i liked about it is its memory-lightweight and source-code tooltips.
That's all.
What's your opinion?? Especially Eclipse users - what is the main reason you use it?? (except of price, of course :))
Interesting..
Boris.

There are a lot of people that say Eclipse is better
than JBuilder.Though I used JBuilder from the days when it released its first version, 1.0 till about an year back, But I would say Eclipse/WSAD is definitely better.
>
I know its free, but if we forget about this, are
there weak sides of JBuilder that Eclipse can be good
seen at?Well you can get WSAD which is not free.
>
I've been used JBuilder as IDE all the time i work.
Last week tried Eclipse. The two things i liked about
it is its memory-lightweight and source-code
tooltips. Well its definitely not lightweight.
That's all.
What's your opinion?? Especially Eclipse users - what
is the main reason you use it?? (except of price, of
course :))
Eclipse is better is debugging and adds a lot of feature s like scrap book and stuff which are not available in JBuilder. This makes eclipse more flexible for debugging purposes while shortenning the development time as well. Another advantage of Eclipse are the readily available plugins which you could put in so easily. Unfortunately thats not the case with JBuilder.
WSAD providing me a default interface for websphere makes it an IDE of choice for all those applications which need to be deployed on websphere later on.

Jbuilder 6.0 Enterprise Integration

Hi
Does anybody know of a plug-in to Jbuilder 6.0, that make deployment to OC4J release 2 easy!
Regards
Morten

Hi Morten,
I must be missing something here! I'm sure you are aware of Borland's
"Code Central", aren't you? Well they have the plug-in (Borland uses
the term "opentool") that (I think) you're looking for. Just point
your Web browser at:
http://radweb.borland.com/codecentral/ccweb.exe/listing?id=17136
Hope this helps you.
Good Luck,
Avi.

Using SQVI to generate report of open and released delivery schedule lines

All,
I'm using SQVI to generate an excel spreadsheet for some buyers to show open released schedule lines because they are a 1 line item per scheduling agreement company.
I used the logical database MEPOLDB instead of a table joint and pulled fields from EKKO(vendor, SA #,&purchasing group), EKPO(Material Number), EKEH(schedule line type), and EKET(delivery date, scheduled qty,previous qty).
Does this sound like I'll get the results I want on paper as long as I use the right selection criteria, because the report I'm getting isn't quite what I expect? I am unable to identify which lines are authorized to ship vs. trade-off zone, planning, etc. in the report thus far.

Hi Mark,
I have faced same requirement. I am not sure about transporting to TST and PROD. I done by this way.
After generating SQVI program in DEV , I assigned that program to a transaction and tested in DEV. Later i have regenarated SQVI in Production. then I assigned the generated Program to same transaction in DEV. And transported the Tcode assignment of program to Production..
About authorization , if its not sensitive report, BASIS can restrict at transaction level.
Regards,
Ravi.

Error while releasing a request.

Hi All,
I'm facing an error while releasing a request.
The request contains an ABAP programs along with two INCLUDDE programs as well as a TCode to run the same.
It is running successfully in dev. server. But, while releasing ths request it shows me the following error :
" Object REPT ZBAPI_SD_SERV_SALES_ORDER is inactive " ,
where ZBAPI_SD_SERV_SALES_ORDER is the program name. When I checked out in ABAP editor it shows the program active.
But, I'm unable to understand why its showing me an inactivation error.
Guys, help me out in this.

Hi,
Check if the INCLUDE program are also ACTIVE. They must be in inactive state. Try activating them and release the request.
Regards,
Vikranth

Release in JBuilder

Similar Messages

Maybe you are looking for