Release Startegy for Item Category

Hi ,
Can we have a release startegy for PO for Charcetrstic Item category.
It do not have any reference in in Table  CEKKO for any field.
Can you tell me how can I activate the item category as a charcetrstic value in PO release startegy.
Thanks,
Lekhram

PO release strategy always work at the header level but if oyu want to add the item level field as a char (in your case Item category) than you need use the user exit to insert the field in CEKKOZZ include of the CEKKO structure.
Use the user exit M06E0004 to insert your field in CEKKOZZ include.
once you get the field in this include then create the Char and use in classification.
But make sure one thing is that
Suppose you create the first line item of PO with Item category D and than you insert the second line with item category L and your release stratey doesn't have the both the item category than you are in problem
Or suppose your first line has blank item category and second one has item category than also you will have issue.
so make sure you create the PO for same item category without any othe combination to work with release.

Similar Messages

  • Credit Check while creation of Sales Order for Item Category Purchase Req

    Hi Experts,
    We are creating Sales Order using an Order Type ABCD for a material 1000. While creating Sales Order, we use Item categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO).
    Credit Check settings are there at Order Type ABCD as well as all the Item Categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO). We are trying to test a scenario where a customer does not have enough credit limit while creating a sales order.
    When we create a sales order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP), credit check fails because our customer does not have enough credit limit, so that Sales Order gets created and Delivery does not get created (This is what we want), then we go into VKM1 manually and relase the sales order and then if we go to VA02 and check the status of the Sales Order, it says sales order status is complete. My Sales Team is saying here also Purchase Requisition is getting created.
    When we create a sales order for Item category ZOBO, it is going into Purchase Requisition screen. Once we give another plant in the create purchase requisition screen and save it we are getting a message that cannot create Purchase Requisiton because of Credit Block.
    The settings were same for all the Item categories.
    1) What made difference to complete Purchase Requisition for Item Categories (ZOVD, ZOVB,ZOST,ZOVP) and not for Item Category ZOBO when my customer is not having enough credit Limit.
    2) Why Purchase Requisition screen is not coming for us when we create an Sales Order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP). We only get Create Purchase Requisiton Screen for Item Category ZOBO.
    Thanks
    Rajanikanth

    Hi,
    None of the Item Categories has Create PO Automatically.
    Thanks
    Rajanikanth

  • SD - Manual entries allowed for item category in the Sales Order

    Hi experts,
    please do you know any OSS note related to SD, in order to increase the number of Manual entries allowed for item category in the Sales Order (table T184)?
    Thank you very much
    Andrea

    Hi,
    I searched OSS notes and did not find any OSS Note related to add more than 11 Manual Item categories or append T184 Table.
    Has any found solution for this, will this be a CORE MOD.
    Pavan Verma

  • New field in Pricing field catalog for Item category

    Dear SD colleagues,
    We have scenario of maintaining pricing for Lower level BOM component.
    Like:
    Base price - 100/-
    When BOM explodes - 95/-.
    For this, I have taken ABAPer help and inseted a Z field for Item category in Pricing field catalog.
    Then, a new condition table is been generated using ZPSTYV and included in Access sequence. For Base price condition type, we have maintained record in combination with ZBOM-Item category for lower level BOM item.
    A new pricing routine is created in VOFM for Condition value and same is been assigned to Condition type as Alternative calculation type in pricin gprocedure contro data.
    Whe I create Sales order, value based on ZBOM is being pciked up by system.
    request you to please help in this regard.
    Thanks & regards,
    Praveen.

    Hi Marino,
    I have a requirement to determine the pricing based on "Discount Code", which is not a standard SAP field and i would like to have this as a custom field and linked to  customer in custom table.
    Question: When i add a new custom field and custom table for pricing, what are all the things i need to do in terms of ABAP.
    As per my knowledge, below are the steps...Please check and confirm my understanding is correct and let me know if i miss anything.
    1. Create a new field
    2. Create Custome Table
    3. Add field to Field Catlogue KOMG
    4. Add Field to KOMP (as this is item field)
    5. Add code in userexit USEREXIT_PRICING_PREPARE_TKOMP to make the data avaialable - Sales Order
    5. Add code in userexit USEREXIT_PRICING_PREPARE_TKOMP to make the data avaialable - Billing
    Thanks.

  • Order-related billing for item category TAN

    Hi All,
    How can I make item category TAN order related-billing document?
    I already changed the settings for TAN:
    Billing Relevance - B (Relevant for order-related billing)
    And maintained the copy control between sales document and billing document for item category TAN:
    Copying requirements: 002 (Item/Order Related)
    Data VBRK/VBRP:      001 (Invoice Split - Sample)
    But when i create the billing document, it is still showing that the item is not relevant for billing.
    Delivery document has already been created for this item. Am I missing something?
    Thanks,
    Olyn

    hi,
    pl enter the billing doc type in the field for order related billing in the sales order document type overview.
    2. there might be billing block at sales document header level or u might have checked billing block at item category TAN,
    CHEERS

  • Ship to party not copied from PR to PO for item category D

    Gurus,
    Am populating unloading point and ship to party in a PR for both item category standard (" ") and service ("D"). However during PR conversion to PO, both these fields only get copied for item category standard and NOT for item category service. What is the correct set up so that these fields are copied from PR to PO during PR conversion ? Any customizing point i missed ?
    Cheers
    Olivier

    HI,
    I think this is the wrong forum to proceed with this.
    SAP Community Network Forums » SAP Solutions » SAP Solution Manager
    Regards

  • Change Partners for item category - TAB

    Hi All,
    Why it is not possible to have different ship-to-party at item level for TAB orders.
    For item category TAB, the partner functions is maintained as "T" which is "No item Partner". Can you help me understand why SAP has maintained like this.
    Please provide me a quick response.

    HI,
    TAB item category is used for Make to Order senario, thats why its do not have Multiple Ship to party or Partner determination for Item category..
    2nd Make to Order is a Order contaning Customer Specific requirements like ur preparing a proto type for customer requirement (Like new development).So they break down the sales order into diff -diff parts U know (we call it BOM) & we get the delivery date s & quanties for that Make to order from Production Order because here Sub items are related to main item like...
    Computer ordered with entena....
    In make to order system brekdown the req.into...
    1Monitor
    2 CPU
    3. entena
    4.TV card etc...But all these belongs to 1 single material (even though they are also a individual material)
    thats why we dont have a provision of partner function for item category TAB....
    I hope i am able to explain u.......Pls. ask me if nathing is not clear to you......
    NOTE: You can always have a diff. Ship to Party at Header level.......
    Regards
    Deepak
    Edited by: Deepak Dhingra on Jul 14, 2009 6:58 AM

  • Zero price for item category

    Hi ,
    I want to controll the price by item category, I want my user to manually change the item category to zzzz  in case the material is sent as sample. For item category B the pricing field has "B" (PRICING FOR FREE GOODS 100%)
    while making sales order even after changing the item category to zzzz , price is getting calculated.
    Pl. help.
    regards,

    hi ankur,
    i have done the item cat determination in VOV4. I am able to change the item category in sales order . In item category I changed pricing to "B" and blank , hoping something would work but no. The problem is even if I am using this ZZZZ item category , price is getting calculated. Is there any other setting except this one. As far as I know this setting is enough to get the all the prices to ZERO is sales order.
    input needed,
    regards,

  • Release startegy for service PO

    Hi,
    Can you people help me out with release startegy for Service PO and service entry sheet?
    Regards,
    Satyendra

    Hi,
    Please refer below mention format.
    SPRO -> Material Management -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders.
    Three steps involved in release process of purchase order.
    1) Edit Characteristic: -
    Create characteristic for release purchase order. If you want to release purchase order on purchasing group base. So you can create characteristic for purchasing group. Take reference of CEKKO structure and BKGRP field for purchasing group in additional data of characteristic. E.g :- Purchasing group - BKGRP
    2) Edit Class: -
    After creation of characteristic, create class for release purchase order. In which you can take reference of
    Class Type: - 032,
    Status: - Release,
    Class group: - Release strategy class,
    And put reference of your characteristic, which are created by you in first step.
    E.g: - Class u2013 REL_PO
    3)Define Release Procedure of purchase order: -
    In this step four processes involved.
    1) Release Groups
    2) Release Codes
    3) Release indicator
    4) Release Strategies
    1) Release Group: - In which you can define release strategy group
    For Exa.: - Release group : - 01,Release object: - 01, Class: - REL_PO.
    2) Release code: - In which you can define release code. Enter value as
    Release group: - 01,release code: -01 u2013 Purchase Head,
    Release group: -01, release code: - 02 u2013 Auditor.
    3) Release indicator: - In this step you have to define release indicator.
    Like X u2013 Blocked, I u2013 Under process, S u2013 Release.
    4) Release Strategy: - This is the final step for release strategy.
    Assign release code 01, 02.
    Click on release prerequisites, select 02 u2013 check box and click on continue.
    Click on release status button, enter release indicator X, I, S and click continue
    Click on classification button, Enter values of purchasing group for which you want to created release strategy.
    Note: - Create characteristics for service order document type in CT04.
    Regards,
    Mahesh Wagh

  • Tranport Request for Item Category

    Dear All
    I am trying to create transport request for item category but when I include it in transport and save it, It give me error
    "Object R3TR TABU TVAPT, referred to by the object key, does not exist
    Diagnosis
    The object keys of the request/task cannot be edited because the object (R3TR TABU TVAPT) which is referenced by the object key is not in the request, nor is it going to be added to the request"  How can i include these object in my transport
    in order to transport them?
    Thanks in Advace
    Nomi

    Dear Marco
    Sorry for late reply.What i did was i asked my basis consultant to modify the traget sytem and customize the item catagory again.I think this is the only solution.If you find another do share with us
    Thank you
    Nomi

  • Material field entry as optional for item category:B

    How to make material field entry setting as optional for Item category:B. By default the setting is Not allowed for material for Item category:B.

    Hi
    Instead of material code ,provide material text in PO & Put an Account Assignment Category

  • What is Completion Rule Setting for Item Category KBN?

    Hi,
    In the standard SAP configuration, what is the setting of Completion Rule for
    Item Category KBN?  In our system, currently it's set to "B".
    Thanks!

    Dear Mari
    In Standard, item category <b>KBN</b> will have "<b>A</b>" as billing relevance.
    "A" Indicates what the basis for billing should be.
    Billing is based on the outbound delivery. Billing status is only updated in the outbound delivery. 
    For information, in standard, both <b>KBN</b> and <b>KEN</b> item categories will have "<b>A</b>" as Billing Relevance and in <b>KEN, "W"</b> will be maintained in the field "<b>Special Stock</b>". 
    Thanks
    G. Lakshmipathi

  • Delevey completion indicator for item category D

    Hi!
    When a PO is created with item category D (service), the delivery completion Indicator is not seen in the PO.
    But, if I craete PO for same document type with item category other than D, I was able to put the delivery completion
    indicator in the Delivery tab in item details. Now, how do I get the delivery completion indicator for Item Category D(Service).
    pls help me.
    Regards,
    Vaibhav

    hello,
    Go to
    SPRO-->MM->Purchase order->Purchasing -> Purchase order-> Define screen layout at Document level
    Select the field selection as PT9F and tick the Delivery Compl Indicator at two places .
    The system will now show you the indicator when you create a PO with item cat as D.
    this should work.
    Cheers... Ganesh S.

  • Automatic Purchase Requestition creation for item category "L" (Stock Item)

    Hi All,
    I have a query,
    When components are assigned to a maintenance order whose item category is "L" (Stock Item).
    As soon as components are assigned a reservation number is generated by the system immediately.
    Now my requirement is,
    for an item category which is "L" (Stock item), while I am saving / releasing the order, system should do availability check and based on the qty available it should automatically generate reservation (in case of full qty is available) or a purchase requisitions ( in case of non availability).
    Is this feasible? If so kindly let me know how it can be done.
    Currently in my case,
    i am getting a reservation number for an an item whose item category is "L" but the stock qty is "zero". System should have ideally generated a purchase requisitions number for such a case because of actual available qty being "zero"
    Is there any setting called "reservation time" so that after checking the availability of that item system decided whether a reservation number should be generated or a purchase requisition number?
    Thanks and with best regards
    Kannan J

    Hi Thyagarajan,
    I wud like to share with you  a content of SAP documentation which is as follows:
    "You can plan materials that are required to execute the task for each operation in the maintenance order. The materials can be bill of material components for the reference object or freely assigned material.
    <u>The materials that you plan for the maintenance order will be reserved in the warehouse, if they are kept in stock. You can set the reservation time in your system using the customizing function. In customizing, it is decided for each order type, whether the system should make the material reservation effective or generate the purchase requisition immediately or only when the order is released.</u>
    An availability check can be called up when components are assigned in the order.
    An automatic availability check is performed when the order is released. The order can also be released if there is no availability.
    A material provision list and material withdrawal slips can be printed together with the order papers.
    Planned goods issues are entered with reference to the reservation, such as reservation number, unplanned goods issues with reference to the order number.
    The goods issues entered appear in the document flow of the order."
    Now with this, is there a way out to resolve the issue?
    Best Regards
    Kannan J

  • User Exits for Item Category Determination based on Item Category Usage

    Hi Gurus,
    If I need to create a new item category usage code and perform item category determination using the new item category usage code, is there a user exit or function module which is able to perform this?
    Thanks & Regards

    Hi Lawrence Tam,
             If you are going to create a new item category usage to determine an item category, you need to add a new line in transaction VOV4 for the new combination of sales document type + Item Cat. group + usage + high leve item cat. to determine the item category.
    Thanks in advance,
    Mariano.

Maybe you are looking for