Release Strategy in PR not triggered for different Purchase Groups.

Dear Experts,
For Purchase Requistion - Header Level Release Strategy has been defined with Purchase Group as one of the Characteristics(Characteristic Values are V1, V2, V3).
When PR is created for 30Line items with V1, V2 or V3 as Purchase groups independently- Release Strategy is triggered.
But when  a combination of all 3 Purchase groups is used in the same PR for 30 Line items together. No Release Strategy is Triggered. All these 3 Purchase groups have been assigned for all strategies.
Thanks & Regards
Chandan H N

You are using characteristic P. Group for different RS. That means that if only one value exists, the system will be able to understand which RS to implement. If you are using more than one values for this characteristic, the system simply does not know which RS to choose and takes nothing.
More simply you are using a header data (p. Goup) for RS and you are using it in line items. This is wrong. You have to make PR's only for the respective P. Group

Similar Messages

  • PO Group for different Purchasing Groups of SC Items

    Hi ,
    I want to create a single PO if 2 different PO Groups are available for items in SC.
    I could see that standard code is splitting PO for different vendors different Purchasing Groups contracts and soo on.
    is it possible to create a single PO for my case mentioned above.
    I am using BADI  BBP_BS_GROUP_BE for this but don't understand how to go about it.
    Please help with your useful suggestions.
    Thanks.

    Hi
    PO can be splitted based on Header Data
    Company Code
    Purchasing Organization,
    Purchase Group
    Vendor
    It also depends upon the backend customizing for assignmnet of plant to Purchasing Organization
    Thanks
    Trinath

  • WRP1 considering Articles with different Purchase group

    Hi
    Gurus,
    We
    are facing issue in WRP1 program, in production system one STO is created
    for many articles with different purchase group with same site,
    But
    My understanding is that when replenishment happens, different STOs will
    be created for different purchase group for same site and client is also
    expecting same thing...
    Issue
    - In STO articles are belongs to same site but different purchase
    group, in PO header its updated purchase group as 002 but if check line items
    Articles are from many purchase group like, 001 , 002 , 003 etc....
    When
    in header its showing purchase group as 002 it should consider articles
    with same purchase group but its combining all articles belongs to same site
    irrespective of purchase group.
    Kindly advise
    Regards,
    Vinay

    Hi Vinay,
    It's standard system behaviour. PO group on header level is for reporting purposes, it's not scoping the allowed articles on the item lines. Therefore, WRP1 creates the STO with a mixture of articles of several purchase groups.
    Perhaps this apporach might be feasible for your challenge:
    - In stead of creating STO, create purchase requisition as follow on document from WRP1 processing (see Store Order Control in SPRO);
    - after WRP1 processing, run ME59N (also possible in background) for the purch. reqs. created in WRP1 with the parameter 'Per purchasing group' (and perhaps also 'Per site'). This should result in STO's per site/purchase group.
    Regards,
    Johan

  • PO Release Strategy not triggerred for particular Total Net Order Value

    Dear,
    I am currently facing the issue where release strategy for purchase orders is not getting triggered for a particular value or lower.
    For order value 1 INR or less, no release strategy is triggered for new created PO. And for value > 1 INR release strategy is getting triggered.
    All otehr PO characterstics are the same, I mean to say the values for other characterstics such as plant material group are identical.
    But the characterstics for release for Total net order value are <= 30000 INR. There are two system copies, where in one system the same release strategy is working as expected. But in other system the above mentioned issue occurs. There is no differnce which I can see in the release strategy setup.
    Please suggest for solution.
    Thank you.
    Warm Regards.

    Dear All,
    While looking further into the issue by going into debugging mode, we have found that in include LCLSCF2I, Internal table p_selection_criteria_tab , the value for ATFLV (Internal Floating point from) gets different values in the two systems. For example, in the affected system, for PO with 1INR tottal value, for one of the Total value chaaracterstics before INR characterstic, ATFLV value is 0,0000000000000000E+00, hence it gets out of loop and doesn't trigger release strategy.
    But in another system for same PO values and release setup, ATFLV value is 1,0000000000000000E+00 for that characterstic.
    May I know how the value for this field gets calculated.
    Thank you.
    Warm Regards.

  • Release strategy not triggering for Specif plant

    Hi Friends
    I configured a release strategy with three charecteristics. P.org, Plant, Net value.
    this stretegy is triggering for specific plants which are under a particular company code, and if I change to my plant and P.org. its not triggering.
    I have deleted all the classifications and release strategies from, no other data in VV_T16FS_2 , AUSP,T16FV,and T16FS tables except this release strategies data.
    do we have any settings at cocode level??????
    please respond if answer known
    Points would be awarded for for your valuable answer.

    Thank you deepak for your quick respond
    Actually There were already release strategies  with same charecteristics, and with the values of other plants and other P.orgs which are under certain companycode.
    these were triggering perfectly for PO
    Now created new strategy for plant and P.org under different plant code of different cocde. this strategy not triggering for PO.
    but if the release strtegy  values replaced by the erlier plants and P.org  again its triggering.
    Now I created new chars, class, and stategies still same problem persists.
    Release stategy working for the values of a prticular company code plants, Porgs.
    and already tried your suggestion Cocode as char. but same its working for only that company code not for my companycode

  • Stop release strategy when pgrp changed triggering different release group/

    Currently when our buyers change the purchasing group field on the purchase requisition it is triggering a new release strategy because the release group and code is different than the original creator. 
    It has been indicated that we should request from SAP that these two fields be made available to the structure for the release strategy. 
    Is there a user exit that we can use to stop a new release strategy?

    Hi,
    Do you have different rel. stgy for diff. plants? if yes, than which rel. stgy should be picked in case if both plants entered have different rel. stgy? what is your expectations/requirements?
    If your PO is to go through diff. approvals for different plants than you should have different PO for each plant (even diff authorizations and rel. codes), or else you should not have plant as the criteria. Technically, whether it is fesible or not is different question, but whether practically your organization is ready that if a common material is to be procured it will have approvals of only one plant or may be a different approvals all together?
    Regards,
    Dakshesh

  • Is update not approved for a specific group via powershell.

    My apologies in advance for asking a similar question to the one I asked two months ago,
    is update approved for specific group via powershell? I thought I had this covered, but as I've found time to continue to work on this project I see that it does not.
    I have a script that iterates through updates and if the release date is older than 30 days and they have not already been “Approved for Install” or “Approved for Removal” for a specific group it approves them. I am currently faced with the dilemma that
    when an update is set to “Not Approved” for the specific group I’m working on it does not come across in my group’s approvals and there for I cannot detect its current state to know if I should approve it. In other words, I don’t want to approve an update
    that I set to not approved for a specific group.
    I am currently achieving all this so far by connecting to my WSUS server and getting any and all updates via $all = $wsus.GetUpdates(). I Then get my group’s approved updates via $groupApproved = $wsus.GetUpdateApprovals($GroupScope) where ApprovedStates
    = "Any" and ApprovedComputerTargetGroups.Add($current_wsus_group). While iterating through $all I grab updates that are older than 30 days and check to see if the updateID exists in my $groupApproved. If it does not, I approve the update. Like I
    said before, an explicitly unapproved update for my group does not show up in my $groupApproved. I understand it’s because of my GetUpdateApprovals($GroupScope) being just that and only getting approved for install or uninstall, but even when I try to simply
    GetUpdates($GroupScope) I am still not returned explicitly unapproved updates. Below is a screen shot of what I mean by explicitly setting an update to unapproved for a group. I’ve read up on
    ApprovedStates and possible enumerated values and it does include "NotApproved" defined as "Includes updates that have not been approved or declined.".
    Hope all that makes sense, thanks for the help.

    So, I've decided to go about this a different way. Rather than getting all updates and comparing them to approvals via a scope of updates for my specific group (which includes all actions but Not Approved), I am going to look at specific approvals for each
    update and see if there is a match for my group. A simplfied version of this is below. 
    $AnyAllUpdates = $wsus.GetUpdates()
    foreach ($udpate in $AnyAllUpdates)
    if ($update IsNOTDeclined IsNOTSuperseded LegacyNameNOTIA64 CreationDateLTDATE yada yada yada)
    # get the approvals for this udpate as they relate to my group
    $uApprovals = $update.GetUpdateApprovals() | ?{$_.ComputerTargetGroupId -eq $wsus_group.Id}
    if ($uApprovals)
    if ($uApprovals.action -eq "Install")
    # do nothing, the udpate was approved for install
    elseif ($uApprovals.action -eq "Uninstall")
    # do nothing, the update was approved for uninstall
    elseif ($uApprovals.action -eq "NotApproved")
    # do nothing, the udpate was not approved for install
    else
    # since there was no specific action then it must be an inherited not approved from teh parent group
    # approve the update!

  • Access control for different user groups in APEX 4.0

    Hi guys,
    in Apex 4.0, is there any way to use the access control page to configure access control for different user groups?
    The access control page currently only has an access control list by users with 3 privileges namely, Administrator, Edit & View where Administrator has the highest access level & View the lowest. Therefore 1 user cannot have more than 1 different privilege, however if the user belongs to 2 or more different groups then we can control what access he can have in a more fine grained manner. We also want to have more than the 3 privileges given.
    Can we assign different groups to different users and let them have different privileges to be configured by page, region, process or item level?
    Now Apex will create 2 tables, Apex_Access_Control & Apex_Access_Setup to store the application access control mode & access control list. It will also create 3 authorization schemes "access control - administrator", "access control - edit" & "access control - view" based on the 2 tables.
    Does this mean we have to change the table structures & edit the authorization schemes to suit our usage? We are reluctant to do this because if we upgrade to a newer version of Apex then we would have to merge our pl/sql coding with Apex's updated code.
    How can we auto-configure more than the 3 authorization schemes in the access control page? Is there any way to achieve a finer grain of access control based on the current access control administration page given by Apex without writing it ourselves?
    We are afraid that we may have missed something on Apex access control & do not want to reinvent the wheel.

    Hi Errol,
    to build your own application authorization scheme around the security model supplied by Apex for administration of the Apex environment would be a bad idea.
    This was never intended for authorization scheme management in custom built Apex applications, it was solely intended to control access in the Apex environment overall. The API for it is not published, and making changes to it, such as adding more roles, would run the risk of breaking the overall Apex security model. It would not be supported by Oracle and Oracle would not guarantee the upwards compatibility of any changes you make in future versions of Apex.
    In short, you should follow Tyson's advice and build your own structure. As he indicated, there are plenty of examples around and provided your requirements are not too complicated, it will be relatively simple.
    Regards
    Andre

  • Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again.

    Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again, after deautherizing it. HELP ME PLEASE

    Hi applerinneedforhelp,
    Thanks for visiting Apple Support Communities.
    If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    Jeremy

  • My touch id is not working for app purchasing loading up my ipod touch back up

    my touch id is not working for app purchasing after loading up my iPod touch back up to the iPhone 5S

    Yes, you will need to call Apple at this point for further assistance.
    Apple ID: Contacting Apple for help with Apple ID account security

  • HT3702 Is it possible to have one credit card and two debit cards on my itunes account so that we can use different cards for different purchases?

    Is it possible to have a number of cards (say one credit card and two debit cards) to be listed as the payment cards for my itunes account, so that different cards can be used for different purchases?  Or can you only have one card registered on itunes at any one time?

    So is there any way that three members of a family can share one itunes account but pay for their own purchases, other than inputting their own cards each time they make a purchase.
    No, there is no way to do that.
    Or if we all have our own individual itune accounts, can we share each other's music, or can you only sync your iphone/ipad/mac, with one itune account at a time?
    You can sync content from up to five iTunes Store accounts to any given computer or device. You just will each have to copy the content into your own libraries so you can sync to your devices and have your devices authorized to all applicable accounts.
    Regards.

  • How to set different default interactive reports for different user groups?

    I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
    For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
    Thanks

    You can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...

  • Descriptive flexfield for different purchase order types

    Hi,
    Can i have a descriptive flexfield for different purchase order types?
    Scenario : I have two purchase order types
    1. Blanket : done from req--> auto create --> standard PO
    2. Standard --> Direct PO
    Regards
    846691

    You can use darpan77's suggestion for context sensitive DFF. See http://oracle.anilpassi.com/context-sensitive-descriptive-flexfields.html for an example.
    However, both options you mentioned talk about standard po. Is the difference in how they are generated? (One is manual and the other is autocreated?)

  • Error : Wage Type is not allowed for personnel SG grouping for WT 3

    Hi All,
    When i am trying to create wage type Degree allowance i am getting error like below.
    WT xxxx is not allowed for personnel SG grouping for WT 3 (from 01.09.2006 to
    31.12.9999)
         Message no. PG 074
    Diagnosis
         In the "Personnel Subgroup Grouping for Primary Wage Types" view
         (V_001P_K), the employee is assigned to personnel SG for primary wage
         types 3. However, this grouping is not valid for wage type xxxx in the
         period from 01.09.2006 to 31.12.9999.
    Please let me know where i needs to check.
    Thanks.

    try to change the start date and try like 01.01.1990 like this
    juss chk and update

  • Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

    help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

    Contact the App store for Apple ID help. Their support link is on the right of the App store window
    LN

Maybe you are looking for

  • Time Machine on a WD Smartware drive? Converting a WD Smartware back-up harddrive to Time Machines

    How do I convert a WD Smartware back-up hard drive to TimeMachine software?  That is, how do I delete the WD Smartware software sothat I can then load Time Machines onto that hard drive and turn it into a timemachines drive?  I ask because the WD Sma

  • Artworks are not shown in my iTunes

    To save disck space on my MacBook I have all my music files on a external hard drive (and the iTunes files in the MacBook disk). However, very often, a lot of artworks that I put in my albuns are not shown when I open the Itunes. To refresh the album

  • Global temporary table in a store procedure

    Hi, I REALLY need to create a global temporary table in a stored procedure but I don't know how ......... My solution was create or replace procedure test( as begin execute immediate 'create global temporary table t(x number,..) ;'; end; but the tabl

  • Combining .dwr Files

    I was hoping someone would know how to combine 4 .dwr files that allow me to find/replace text on my html page. If there is some way of combining the 4 files into 1 file so that the find/replace scripts work one after the other, this would save me ti

  • DV6000 not recognizing it's own old hard drive

    Hi all. I tried putting in a new hard drive, went through the clone process, installed the new drive, and got an error message about checking the cable. That, however, is not my concern. Now the problem is, I put the old hard drive back in and the co