Released the Transport Request which is in Local Change Request

Hi,
        Actually without knowing I have released  transport requests which are  under Local Change Request.Due to this they are not available for importing in Quality system.My  Package is also there in one of those Requests.Now please guide me how to recover these requests.
Regards
Karthik

Hello Karthik
The easiest way should be to copy the object list of your local request to a new (transportable) workbench request.
However, the system might tell you that your objects can only be put into a local request.
In this case you need to find out why your objects are not (yet) transportable.
Usually there are two reasons for local request:
1.) The request does not have a target system -> check the request header and enter the correct target system (if possible)
2.) Your package has an inappropriate transport layer assigned -> change the transport layer
Regards
  Uwe

Similar Messages

  • Local change requests being created for changing package info

    Hi experts,
                     After a client copy of object into a new server whenever changes are being made to these objects local change requests are being created. i found that the above behaviour is because of the transport layer in the package, which was also copied during client copy, is of the old server. And when that was change to the one available in the new server the change to the package also got created as local change request. Now I wan this package to get transported to quality from development ( where the change was made). Please help.

    Hi,
         Thank you for your suggestion. I Created a Tp copy and included the local change requests in them and gave target system as quality system. There were 2 requests as local change requests, only one of them took the intended change in the quality but for the other the change made in the development system was not refelecting in the quality system.

  • Tansportable request change to local change request by mistake

    Hi,
    I have a  standard 3 system TMS, DEV,QAS, PRD
    I delete the virtual QAS and active the transport route by mistake, and all the transport able request changed to local change request...
    and now I have configured the TMS in the right way.
    and can create the transportable request.
    How can I move the old requests back?
    From local chang request to transportable request?
    Many thanks.
    BR,
    Randy

    Hi ,
    I remeber doing something like this.
    SE01--> Create a transport of copies request --->create new request ---> then to the new requset ---> go to the Request/task (menu item) -
    > other request (here we can choose which transport we want to include in this new TR) .
    I am not really sure why we choosed like Transport of copies and why not others.etc.
    Even I need to read more about this.I remembered that this worked for us.
    Hope this helps you too .
    Thanks.

  • Can give me the details how to release the transport request to the qa

    can give me the details how to release the transport request to the quality server pr production server
    thanks

    Hi,
    Use transaction SE09. Here select "modifiable" .Then click -Display.
    Now you get a list of all requests which can be released.
    Locate your request number and drill down. Release the sub-request first and then the main request by selecting and using the "transport" icon.
    Muraleedharan.R
    091 9880028904

  • Release the transport request

    Hi,
    I created the transport request.I want to release the transport request from developement to testing ,
    Please tell me how to do that.
    regards,
    chinna.

    Hi,
    Check the below steps.
    1. Go To SE09 or SE10.
    2. Click 'Display' button.
    3. TR will be list out in Tree view.
    4. Place the cursor in the TR which is going release.
    5. in menu, Request/Task->Complete check->object and
    Request/Task->Complete check->Check Request Consistancy
    Request/Task->Complete check->Inactive Objects.
    6. in above if you get any error, you should rectify the error and repeat all the steps again. otherwise do the step7.
    7. Click the 'Release Direclty'[F9] button in the toolbar.
    Regards,
    Boobalan S

  • What happen if I change a role after I released the transport?

    Here is my Scenerio:
    1) Assuming I've created a role : ROLE1 in DEV
    2) I create a transport TR1 with that ROLE1, NOT yet released.
    3) Then I added ME21 txn to ROLE1.
    4) Then I released the transport TR1
    5) Then I remove ME21 txn from ROLE1.
    6) Then I transport role from DEV to QA.
    Q1) I would expect In QA, ROLE1 will still has ME21. - True?
    Q2) TR1 will be the snapshot of the ROLE1 when I release the transport TR1 - True?
    Now, I want to delete the ROLE1,
    A) I would need to create another Transport TR2 first with ROLE1 in DEV
    B) Then delete ROLE1 in DEV
    C) Then release Transport TR2
    D) Then I decided that I still need ROLE1. (oops)
    Q3 I should not transport TR2 so that it won't delete it in QA. - True?

    Hi Dominick,
    >
    > 1) Assuming I've created a role : ROLE1 in DEV
    >
    > 2) I create a transport TR1 with that ROLE1, NOT yet released.
    >
    > 3) Then I added ME21 txn to ROLE1.
    You should add the role again to the Transport to avoid inconsistency
    > 4) Then I released the transport TR1
    >
    > 5) Then I remove ME21 txn from ROLE1.
    >
    > 6) Then I transport role from DEV to QA.
    > -
    >
    > Q1) I would expect In QA, ROLE1 will still has ME21. - True?
    Answer: If you reassign the role to the TR then you will get.
    > Q2) TR1 will be the snapshot of the ROLE1 when I release the transport TR1 - True?
    Answer:  TRUE (but without ME21 if you don't add the change to the CR - see below for detail discussion)
    > -
    >
    >
    > Now, I want to delete the ROLE1,
    > 
    > A) I would need to create another Transport TR2 first with ROLE1 in DEV
    >
    > B) Then delete ROLE1 in DEV
    >
    > C) Then release Transport TR2
    >
    > D) Then I decided that I still need ROLE1. (oops)
    > -
    > Q3 I should not transport TR2 so that it won't delete it in QA. - True?
    Answer:  TRUE. And if you want the role again back to DEV without recreating it, please download the role from QAS or PROD and then Upload it to DEV. After that you need to generate the Profile of the role.
    > -
    FYI:   When a Change is Included into a request to send in other systems, then this request is called "Change Request" (CR). After Releasing, the CR called as "Transport request".
    CRs are basically (in layman language) the Pointers to the DB changes performed. These are included into a CR as "Task". A CR can contain multiple Tasks created by different users.
    Please note if this is a Workbench CR then it is ONLY editable by that particular user(owner of the Task). Also the Object captured in a Task of a WCR possesses a Lock till it gets released and thus can't be added to any other Task of a different CR. The Objects are unlocked when the Tasks and the CR is released respectively.
    There are no Object Lock for Customizing CRs ... like your TR1 which contains Creation / Deletion of roles.
    After the release of each Task, all Objects contained into every Task are transferred to the Change Request. After release of all Tasks, the CR owner can release the CR and thus the Transport Request has been initiated. Technically, at this time, a copy of Data from the Database of DEV captured under the headers of each Tasks are written to Data Files in Central Transport Directory.
    Now coming to your queries..... there are no such synchronization happens for a Task if the Objects are edited in different time frames before Release.  So, when you added ME21, again you need to assign this change to the same CR. (_Answer to your Q1_)
    Please let me know if you have any confusion / query.
    Regards,
    Dipanjan

  • Need to change the local change request to development class for Process Ch

    Hello ,
    I have created a Tranport request for Process chain but its saved as local change request .
    Please suggest how to change that .
    Thanks ,
    Rahul

    Hi
    1.First delete the request which you collected the process chain as local object becuase you will not able to collect the process chian again.
    2. Goto Tranport connector to collect the process chain again.
    3. Select grouping option as necessary objects.
    4. Drag and drop the process chain to the right hand side
    5. After collecting the process chain, click on the package icon and give the package created for development class.
    6. The system will ask for Transport request and save the PC in the Transport Request.
    Hope it helps.
    Regards
    Sadeesh

  • Changing  from local change  requests to transportable

    Hi gurus
    i have a system that has transport system set to Local change Requests and would like to transport them into another system .The transports have been released .what is the quickest way to change this without redoing the transports?
    Any ideas are welcome

    Hi,
    did you configure STMS and transport route?
    if yes then process as follows.
    create new workbench request using SE10
    SE10 -> create -> workbench request ->
    give the description and target system SID.
    select the request and click on include object ( ctrl + F11)  check object list from request and enter you local transport request number. -> enter
    release the new request and import it in target system.
    regards,
    kaushal

  • Default transport under Local change request

    Dear Friends,
    I am trying to transport objects from dev to QAS. i catch hold of the object, create transport request. By Default they are getting assigned to Local Change Requests instead of being assigned to Modifiable requests under target system. (in SE09)
    how can i change the default from local change request to Quality.
    Regards
    Paddy

    Thanks Edwin,
    this is what i am doing now. But, by default i want it to be set in Quality--> Modifiable.
    Everytime going to settings and changing it does not seem to be a permanent solution.
    Request your earliest response.
    Rgds.

  • Transporting local change request

    Hi all,
          I had updated an include (MV50AFZ1 - SAP standard one - used access key to change this) to copy STO header and item texts to delivery when delivey documnet was created. This was created as a local change request. My basis guy tells me that this request cannot be transported.
    Kindly let me know how this can be done.

    Hi,
    Go in that include and change it once thenit will ask for the package name to save , then save it in a package so that a new request will be created.
    If it is not happening..
    Then in the menu of ur include <b>goto->object directory entry</b> change the $tmp to new package,
    then it will ask for the request...
    or
    else the best way is to delete the old local request.. then if u save it, it will automatically ask for the package and then u can able to create a requset...
    Cheers,
    Simha.

  • Local change requests

    Dear All,
    One of transport request has ersides at
    302-> Workbench -> Local change requests . --> When I release the Transport
    request its didnot create a data and cofiles under /usr/sap/tans folder. 
    At the same time  Transport request is resides at
    302-> Workbench ->  DMY Dummy->Released the request -> created the  data and cofiles.
    1. What is the Difference between Local change requests and DMY transport requests.  ?
    2. How to get the data and cofiles of transport request resides under Local change requests. is their any way to copy and create a new transport. If yes. How to copy and create a new transport request in sap R3 4.6C.?
    Thanks
    Malai

    Dear Sharath,
    Thank you for the detaild information.
    I have mistakenly already released local transport request,  Now status shows that released. And screen is not editable.
    Hence I tried  your second options.
    Created the copy of "Local Change request" which I already released,
    XXXK900206       XXXPADM       For Pmg Modification 20100531 Modification
         XXXPK900207   XXXPADM       Repair (Changed from Unclassified)
             Object list of request
             Comment: Object list included
             Report source
    First I released the reference  Transport Request. Its released fine, then  When I release the transport request it prompt a small window
    Object Checks
    Not all objects in the request could be locked
    Do you want to release them anyway?
    Yes or Error or Cancel  is available.
    I clicked the error button.  found that below message on the screen.
    Object LIMU REPS ZFFF0020:
    Only edit objects from development class ZPF001 in local requests
    Object LIMU REPS ZFFF0320:
    nly edit objects from development class ZPF001 in local requests
    Object LIMU REPS ZFFF0380:
    _When I click Icon which resides above error , it prompt me the below window_
    Only edit objects from development class ZPN001 in local requests
    Message no. TK 332
    Diagnosis
    Objects in development class ZPN001 cannot be edited in transportable Workbench requests in the current system FNP. The transport routes are configured such that objects from development class ZPN001 can only be edited in local Workbench requests.
    System Response
    The function terminates.
    Procedure
    You have the following options:
    If you want to transport objects in development class ZPN001 into the target TS1 once only, without changing the configuration of the transport routes, then create a transport of copies in the extended view of the Transport Organizer (Transaction SE01). Go to the request overview and choose Request/task -> Object list -> Include objects to include your objects in this transport of copies.
    If you would like objects in development class ZPN001 to be transported generally into the target system TS1, contact your transport administrator. In this case, the configuration of the transport routes must be corrected in the Transport Management System (TMS). For details, see the documentation on the Transport Management System.
    PLease let me know how to procedd?.
    Thanks
    Malai

  • Local Change Request created in PRODUCTION needs to be moved to SANDBOX

    I need to transport a request from Production (BWP) to a sandbox system (BS1), but when I create the transport it is created as a Local Change Request. How can I change it to a transportable request? I've checked the development class and it is correct. The package is ZBW and the transport layer is ZBD1. Please help.

    Adding further to Santosh's suggestion....
    Creating the transport of copies is the easiest option..if this is a one time activity...
    Once the the objects are included from the Local change request to the transport of copies...release this...
    Then move the tranport files at the OS level to the import queue of the Sandbox system....then in STMS of the SANDBOX..attach these file to the queue and then import it....
    Thanks.

  • Local change request

    hi
    i released local change request in my development server .but it is not showing request number in queue any another place. i want that local change request released request in quality server queue
    is there a way to modification in released request .
    any possible to the released request get back to original place.
    pls give me solution

    Local change request will not create any request files (data/cofiles), you can create another request manually and add the object of the local request. SE09 --> create request --> select type of request (customization or workbench) --> type des and create new request.
    expand the newly created request and select include objects --> and the appropriate request.
    alternative is do minor changes in the program and it will popup you for new changes reuqest.
    cheers,
    -Sunil

  • Re:Error while importing the TP from dev to quality through change request

    Hi Guys,
    We have implemented change request and upgraded for SP 15 support pack
    when the user tries to import through urgent correction by selecting pass correction to test the TP is not getting imported, when i checked the log it is saying
    System cancel RFC destination SM_BQ2CLNT100_TRUSTED, Call TMW_SET_PROJECT_SWITCHES: No authorization to logon as trusted system (Trust ed RC=2).
    You cannot import any requests for project BD2_P00001 at the moment
    Then i went to show project status switches and changed as "Request can be imported" from " request cannot be imported", then the user is able to import the UC from the task list,
    But ideally the status switches should be " request cannot be imported" so that the TP can be imported only through change request.
    kindly give ur inputs as it is very urgent.
    Regards
    Raju

    Hi Jith,
    First of all try to consolidate all your objects in a single TR and then move to Q from D.
    In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
    Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
    1. Go to your transport Logs and then to the entries marked as Error.
    2. There you will find the Query Element Ids, copy them
    3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
    Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

  • Creation of Change request with reference to existing change request

    Hi
    I want to do Creation of Change request with reference to existing change request for MDG-F and MDG c/MDG S Is it possible? If yes, How?

    Hi Sanjay,
    No , its not out of box functionality in MDG. Reason being, MDG framework provided some standard API's with the help of which we can do our development with ease.
    Like Governance API                            : IF_USMD_GOV_API
           Convenience Governance API         :IF_USMD_CONV_SOM_GOV_API
           Change Request API Interface:       IF_USMD_CREQUEST_API
    With the help of which you can play around with your data in MDG with the pre-defined methods of it.
    Best Regards,
    Kaustubh

Maybe you are looking for