Remapping record identifiers error

I crashed 10.5.2, had to reinstall 10.5.1 then combo update and since then when I sync my iPhone I get this error in iTunes:
"iTunes could not sync mail accounts to the iPhone "Mark Richardson's iPhone" because an error occurred remapping record identifiers."
I deleted the email account from iPhone, re-entered the email account again and got same error on syncing. BUT I sent a test email to this account and got an email. So the account works but its not recognized in iTunes sync.
Any suggestions?

This was addressed in a previous post:
On the next sync, try going into the info tab in itunes and uncheck sync email accounts.
Then click apply in the bottom right corner.
Close itunes and disconnect the iphone.
Now open isync in your applications folder.
Open the isync preferences.
Reset sync history.
Once sync history is reset, you can try opening itunes, connect the iphone and try syncing again.
If the error still occurs, you can leave the option to sync accounts to the iphone unchecked since this does not mess with sending or receiving mail on the iphone.

Similar Messages

  • SMTP Server changes on Mac now causing error "remapping record identifiers"

    I had some problems all of a sudden with outgoing smtp server settings as I traveled from place to place. I finally got all that resolved through trial and error. Now when I sync my iPhone, it tells me "iTunes could not sync mail accounts to the iPhone "my name" because an error occurred remapping record identifiers. iPhone mail is working fine. Did the smtp server setting changes cause this? How do I fix it? Would appreciate your comments and suggestions.

    Check Damon's answer in this thread.
    http://discussions.apple.com/thread.jspa?messageID=6073736
    Did you make these changes on your iPhone, or with the Mail.app on your MBP?
    FYI - the sync process for email account setup information in a transfer process in one direction only - from your computer to your iPhone. Any changes made to account settings on your iPhone will not be transferred to your Mac. Email account settings are not synced.
    If you made the changes to the account settings on your iPhone only, the changed settings will be overwritten with the account settings on your Mac when syncing. Transferring email account settings via the sync process only needs to be done once - unless you make changes to the account settings on your computer that you want transferred to your iPhone - without having to manually change the account settings on your iPhone.

  • Help!  iTunes could not sync mail accounts to the iphone "iphone" because an error occurred remapping record identifiers.

    error message after trying to sync iphone:  iTunes could not sync mail accounts to the iphone "iphone because an error occurred remapping record identifiers.  What does this mean?   how do I fix it?

    You can either setup your mail account settings manually or sync your settings to your phone. If your mail accounts are already setup on your phone, there is no need to have this box checked in itunes.

  • "iTunes could not sync mail accounts to the iPhone because an error occurred remapping record identifiers.

    When I sync my 3g iPhone to my laptop - windows , I am getting a new message that "iTunes could not sync mail accounts to the iPhone because an error occurred remapping record identifiers.
    Can anyone help me to solve this issue ? relly its a major problm

    iTunes is running into a conflict between mail account information already on your iPhone and the accounts you are trying to sync.
    Connect your iPhone to your computer. In the Advanced section under the Info tab, check the box next to "Mail Accounts". This will replace the mail account info on your iPhone with the accounts you are trying to sync.
    If this does not work, then reset your sync history by opening the iSync application, going into the preferences, and clicking Reset Sync History.

  • Mail account Sync Error "an error occurred remapping record identifiers"

    I hope someone might be able to shed some light on this problem I am having.
    I have a POP and an IMAP (mobile.me) mail account on my Mac which I also have on my iPhone. Email works fine on both devices but on every iPhone Sync attempt in iTunes I get the same error message as per the following image.
    !http://www.wrxownersclub.com.au/forum/syncerror.jpg!
    The following is from the AppleMobileSync.00.log from within Console.
    2009-01-30 13:04:59.682 AppleMobileSync 1440:2689074976 SyncClient.m:- ConcreteSyncClient remapRecordIdentifiers:dataClass: ERROR: Exception NSInvalidArgumentException calling clientChangedRecordIdentifiers: ISDSqliteRecordIdMapper replaceLocalId:withLocalId: : you can't change the local id 501CDE24-46B5-476F-A21A-1C9AD7E0DA60 -> 8769B17E-D91B-4E85-B960-457AFCA85949: both the new and old ids are already mapped to global ids
    I've tried deleting both accounts from my iPhone but on Syncing again they are not re-created anew as I thought they would be.
    Does anyone have any suggestions.
    Chris

    Before the next sync, try going under the info tab for your iPhone sync preferences and uncheck sync email accounts. Select apply in the bottom right corner.
    Quit iTunes and disconnect the iphone.
    Launch the iSync application in your applications folder and go to iSync preferences.
    Select Reset sync history.
    After resetting sync history, restart your Mac. Launch iTunes and connect your iPhone. Select syncing the email account settings for these email accounts under the Info tab for your iPhone sync preferences. Select Apply, followed by a sync.
    If this works, you can deselect syncing the email account settings for your iPhone sync preferences. This transfers email account settings only from your Mac to your iPhone. After the account settings are successfully transferred to your iPhone, there isn't any reason to include this with every sync. You only need to do this if your email account settings change for these email accounts on your Mac, which shouldn't happen very often.
    If this doesn't work, leave the option to transfer the email account settings under the Info tab for your iPhone sync preferences and manually re-create the accounts with the iPhone's mail client.

  • Sync problem - Outlook Exp -- "error occurred remapping record identifiers

    What does this mean? It's preventing me from syncing my iTunes as well. Thanks.

    Hmm, I think I just solved this, at least for me: on the Info pane of the iPhone's settings in iTunes, I checked Mail Accounts down in the Advanced section, so it replaced the info on the iPhone with the latest Mac settings. Then I synced again, and didn't get the message.

  • TS1363 Sync problem occurred during remapping record identifiers. How to solve?

    This problem start a few weeks ago and it happens at the end of sync process.
    Does it has any solution?

    New one on me, but perhaps this will help: http://forums.macrumors.com/showthread.php?t=516590
    I'm assuming from that thread that the error relates to syncing organizer data with Outlook or something similar... Might be worth running any consistenty checks that available such as ScanPst.
    tt2

  • Invalid identified error in procedure

    hi
    I have a package that has a declare variable ,vfilename. I set the value of the variable vfilename to a file name for eg 'abc.txt' when the package scenario is callled. Now this file is the source for an interface that loads from this file to a target table. The interface has source datastore resource defined as a variable.
    After running this interface a procedure is called that will update a metadata table where the record has file_name col value=vfilename.
    to do this in the ODI procedure I am calling a plsql procedure as below
    Begin
    update_load_status(#vfilename)
    end;
    When this procedure runs I get an error as below
    904 : 42000 : java.sql.SQLException: ORA-00904: "abc"."TXT": invalid identifier
    If I call the procedure by hard coding the value i.e update_load_status('abc.txt'). It works fine.
    I have tried concat etc but still the value is not getting passed correctly and I am getting the invalid identified error. Is there a way to get around this?

    If you are saying this code -update_load_status('abc.txt'). work
    then call the variable this way
    Begin
    update_load_status('#vfilename');
    end;

  • How to edit the records in error stock.

    Hi Experts,
                 i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
    i want to get the edit option means i need to delete the request in target r wt ?
    and there are two more targets is there below this process .
    Advance Thanks.
    Regards
    SAP

    HI
    If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
    this is the option which is recommended.
    follow the below 2 docs as well.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh
    Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM

  • Dynamic SQL Issue ORA-00904:invalid identifier error

    Here is my SP
    create or replace procedure srini_ref_cursor_test(p_county_code IN VARCHAR2,
    p_ref_cur out PK_FR_TYPES.cursor_type) is
    query_str varchar2(5000);
    begin
    query_str := 'SELECT * FROM dw_county where county_name = :P ';
    open p_ref_cur for query_str USING p_county_code;
    insert into srini_query_str_test values (query_str);
    commit;
    end srini_ref_cursor_test;
    When I pass the p_county_code = Adams working find.
    create or replace procedure srini_ref_cursor_test(p_county_code IN VARCHAR2,
    p_ref_cur out PK_FR_TYPES.cursor_type) is
    query_str varchar2(5000);
    begin
    query_str := 'SELECT * FROM dw_county where county_name in ('||p_county_code||')';
    open p_ref_cur for query_str;
    insert into srini_query_str_test values (query_str);
    commit;
    end srini_ref_cursor_test;
    When I pass the p_county_code = Adams for above SP I got the following error
    ORA-00904: "ADAMS": invalid identifier error
    With out Bind variables how Can I pass the Char type values in Dynamic SQL ?
    I would like to pass multipule values to p_county_code like 'Adams','Ashley' etc
    How Can I do this ?
    Thank for great help.
    Srini

    How do I write the Dynamic SQL for
    SELECT * FROM DW_COUNTY WHERE COUNTY_NAME LIKE 'Ad%'
    The usual way...
    hr@ORA10G>
    hr@ORA10G> var str varchar2(1000);
    hr@ORA10G> var cr refcursor;
    hr@ORA10G>
    hr@ORA10G> exec :str := 'select * from employees where first_name like ''A%''';
    PL/SQL procedure successfully completed.
    hr@ORA10G> -- note the escape character for each single quote
    hr@ORA10G> print str
    STR
    select * from employees where first_name like 'A%'
    hr@ORA10G>
    hr@ORA10G> exec open :cr for :str;
    PL/SQL procedure successfully completed.
    hr@ORA10G> print cr
    EMPLOYEE_ID FIRST_NAME           LAST_NAME                 EMAIL                     PHONE_NUMBER      HIRE_DATE JOB_ID    SALARY COMMISSION_PCT MANAGER_ID DEPARTMENT_ID
            103 Alexander            Hunold                    AHUNOLD                   590.423.4567         03-JAN-90 IT_PROG          9000                       102            60
            115 Alexander            Khoo                      AKHOO                     515.127.4562         18-MAY-95 PU_CLERK         3100                       114            30
            121 Adam                 Fripp                     AFRIPP                    650.123.2234         10-APR-97 ST_MAN           8200                       100            50
            147 Alberto              Errazuriz                 AERRAZUR                  011.44.1344.429278   10-MAR-97 SA_MAN          12000             .3        100            80
            158 Allan                McEwen                    AMCEWEN                   011.44.1345.829268   01-AUG-96 SA_REP           9000            .35        146            80
            167 Amit                 Banda                     ABANDA                    011.44.1346.729268   21-APR-00 SA_REP           6200             .1        147            80
            175 Alyssa               Hutton                    AHUTTON                   011.44.1644.429266   19-MAR-97 SA_REP           8800            .25        149            80
            185 Alexis               Bull                      ABULL                     650.509.2876         20-FEB-97 SH_CLERK         4100                       121            50
            187 Anthony              Cabrio                    ACABRIO                   650.509.4876         07-FEB-99 SH_CLERK         3000                       121            50
            196 Alana                Walsh                     AWALSH                    650.507.9811         24-APR-98 SH_CLERK         3100                       124            50
    10 rows selected.
    hr@ORA10G>
    hr@ORA10G>pratz

  • Error in ST05 - trace record pair error block. How to resolve/tackle issue?

    Hello,
    Someone approached me last week in asking me how to resolve an issue in ST05. Basically I used the transaction to filter "inclusive VBPA".
    The error is ....
    Internal error - trace record pair error block 8 link no. 0
    Message no. 0S 026
    Diagnosis
        Each SQL statement is described by two SQL trace records that have the
        same link number. In this case, there are at least three records with the
        same link number.
        The system outputs the number of the block in which the third SQL trace
        record was found, as well as the link number of the records.
    System response
        Program processing continues after the message is displayed. The system
        processes all of the trace records. You should assume, however, that the
        SQL trace in this case is not displayed correctly.
    Procedure
    You cannot correct this error yourself. If you can reproduce the error,
    contact the SAP Hotline.
    SQL trace list editing terminated after 6 errors
    While using the trace I am executing the program that selects VBPA once and, I am assuming, as it goes through the BAPI BAPI_SALESORDER_CHANGE used to unblock a delivery block. I am guessing the problem or source is from the BAPI but do you guys have other insights in what is causing this issue?
    Thanks again, hope to hear from you soon, and good day.

    Our ERP LIVE Production around 11am all users encountered cannot generate print record from the submit new request. see below errorFor production issues, please log a SR.
    ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.
    ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.
    ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.Please see these docs.
    OERR: ORA 60 "deadlock detected while waiting for resource" [ID 18251.1]
    What to do with "ORA-60 Deadlock Detected" Errors [ID 62365.1]
    Thanks,
    Hussein

  • Invalid State Identifier Error

    Hi All,
    I have implemented breadcrumb by using "a href="javascript:history.back()". The naviagtion is upto 5 repots and hence the breadcrumb will have 5 links. The issue is sometimes i get "Invalid State identifier" error with some random number when i click on any link in the breadcrumb.
    Unable to trace the root cause of this issue. Please provide your thoughts.
    Regards,
    Swati

    Thanks!!! Do you have any idea about Invalid state error? I have tried inserting the following as suggested by Oracle but doesnt help much.
    <StatePool>
    <MemoryExpireMinutes> 1440 </MemoryExpireMinutes>
    <DiskCleanupIntervalMinutes> 1440 </DiskCleanupIntervalMinutes>
    </StatePool>
    Regards,
    Swati

  • BDC -  How we can identify errors in Transaction method?.

    Hi ,
    How we can identify errors in Transaction method?.
    Regards
    Nikhil V Kumar

    HI
    CALL TRANSACTION 'FK01' USING IT_BDCDATA MODE 'A'
                            UPDATE 'S'
                            MESSAGES INTO IT_MESSAGES.
    IF SY-SUBRC <> 0.
    PERFORM FORMAT_MESSAGES.
    form FORMAT_MESSAGES .
    DATA: L_MSG(100).
    LOOP AT IT_MESSAGES.
    CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
       ID              = IT_MESSAGES-MSGID
       LANG            = SY-LANGU
       NO              = IT_MESSAGES-MSGNR
       V1              = IT_MESSAGES-MSGV1
       V2              = IT_MESSAGES-MSGV2
       V3              = IT_MESSAGES-MSGV3
       V4              = IT_MESSAGES-MSGV4
    IMPORTING
       MSG             = L_MSG
    EXCEPTIONS
       NOT_FOUND       = 1
       OTHERS          = 2
    write:/ l_msg.
      endloop.
    endform.                    " FORMAT_MESSAGES
    HOPE THIS HELPS,
    PRIYA.

  • New Repository variable failing with 'Unresolved Identifier' error

    Hi,
    I created a new repository variable and when used in the Segments/Reports it is failing with 'Unresolved Identifier' error. This is happening intermittently and sometimes it is getting the results as expected, Can you please let me know where I am wrong?
    Thanks,
    Viswanath K M

    Couple things to check here are :
    1) Make sure you have spelled the variable name correct.
    2) Make sure you are using the repository variables with appropriate data type columns.
    Regards,
    -Amith.

  • NEED HELP STRUCTURING A SUBSELECT - INVALIS IDENTIFIER ERROR

    This is my 1st post to this PL/SQL forum. I've used TSQL up to now; first job with PL/SQL and Oracle DB. I'm getting a "INVALID IDENTIFIER" error on the ORDER BY line (next to last line in code) in the following code. I haven't doen a lot of subselects and none with grouping. All I'm trying to do is get a count of states my customers are in... Any ideas what might be causing the problem, or a better way to structure this? (I tried the subselect in the SELECT statement as well with no luck there either)
    -- count and list All states by state zipcode resolution
    SELECT st.state, COUNT(*) AS count_by_state
    FROM ADM.USR u
    INNER JOIN
    SELECT
    CASE
    WHEN zipcode BETWEEN 99501 AND 99950 THEN 'AK' -- Alaska
    WHEN zipcode BETWEEN 35004 AND 36925 THEN 'AL' -- Alabama
    WHEN zipcode BETWEEN 71601 AND 72959 THEN 'AR' -- Arkansas
    WHEN zipcode BETWEEN 75502 AND 75502 THEN 'AR' -- Arkansas( Texarkana)
    WHEN zipcode BETWEEN 85001 AND 86556 THEN 'AZ' -- Arizona
    WHEN zipcode BETWEEN 82001 AND 83128 THEN 'WY' -- Wyoming
    ELSE NULL
    END AS state
    FROM CUST.USR_PRFL
    ORDER BY state) st ON u.usr_id = st.usr_id
    GROUP BY st.state;
    Edited by: 927929 on Apr 16, 2012 7:05 AM
    Edited by: 927929 on Apr 16, 2012 7:07 AM

    try
    SELECT st.state, COUNT(*) AS count_by_state
    FROM ADM.USR u
    INNER JOIN CUST.USR_PRFL up ON u.usr_id = up.usr_id
    INNER JOIN
    SELECT
    CASE
    WHEN zipcode BETWEEN 99501 AND 99950 THEN 'AK' -- Alaska
    WHEN zipcode BETWEEN 35004 AND 36925 THEN 'AL' -- Alabama
    WHEN zipcode BETWEEN 71601 AND 72959 THEN 'AR' -- Arkansas
    WHEN zipcode BETWEEN 75502 AND 75502 THEN 'AR' -- Arkansas( Texarkana)
    WHEN zipcode BETWEEN 85001 AND 86556 THEN 'AZ' -- Arizona
    WHEN zipcode BETWEEN 82001 AND 83128 THEN 'WY' -- Wyoming
    ELSE NULL
    END AS state
    FROM CUST.USR_PRFL
    --ORDER BY state
    ) st
    -- any relation beetwen? like "ON u.usr_id = up.usr_id" above
    GROUP BY st.state
    ORDER BY state;

Maybe you are looking for