Rememberin​g Previous State in Array

It appears I can't wire an array back to itself so it can recall it's
previous
state.
I'm trying to read and record a multimeter measurement for 7 different
values
and place the output into an array that corresponds to one of 7 different
buttons.
I'd like the array to remember it's previous state for the buttons that
aren't
being pressed.
Here's a link to the vi of what I'm basically trying to get at:
http://members.fortunecity.com/pongclub/MultiMeter​SwitchArray.vi
Any ideas for solving this problem will be appreciated.
--Rob
http://members.aol.com/ttoutpost1

Rob,
I tried to go to the link but it wasn't there. If you are inside a while loop, you can use a shift register to recall the previous state.

Similar Messages

  • RE: Remembering Previous State in Array

    The previous vi link doesn't work.
    Here's a link to the file that I zipped:
    http://homepages.about.com/mesatabletennis/MultiSwitch.ZIP
    --Rob
    >===== Original Message From Robert Trudell =====
    >It appears I can't wire an array back to itself so it can recall it's
    >previous
    >state.
    >
    >I'm trying to read and record a multimeter measurement for 7 different
    >values
    >and place the output into an array that corresponds to one of 7 different
    >buttons.
    >
    >I'd like the array to remember it's previous state for the buttons that
    >aren't
    >being pressed.
    >
    >Here's a link to the vi of what I'm basically trying to get at:
    >
    >http://members.fortunecity.com/pongclub/MultiMeterSwitchArray.vi
    >
    >Any ideas
    for solving this problem will be appreciated.
    >
    >--Rob
    >http://members.aol.com/ttoutpost1
    Get your FREE web-based e-mail and newsgroup access at:
    http://MailAndNews.com
    Create a new mailbox, or access your existing IMAP4 or
    POP3 mailbox from anywhere with just a web browser.

    I hadn't tried using local variables. Someone else suggested using shift registers which worked out great.
    Attachments:
    multimeterswitcharray.vi ‏30 KB

  • Remembering previous state in array.

    Sample VI at:
    http://homepages.about.com/mesatabletennis/MultiSwitch.ZIP
    It appears I can't wire an array back to itself so it can recall it's previous state.
    I'm trying to read and record a multimeter measurement for 7 different values and place the output into an array that corresponds to one of 7 different buttons.
    I'd like the array to remember it's previous state for the buttons that aren't being pressed.
    --Rob

    Yeah, that's what I needed. Thanks.
    Attachments:
    multimeterswitcharray.vi ‏30 KB

  • How to view previous state in Camera Raw?

    In Photoshop, all of the various image adjustments allow the user to view the previous state of the image, after the sliders are moved. This is very helpful while editing an image. However, I can find no similar ability in Adobe Camera Raw. Is there a way to quickly compare the "before" and "after" of  images while editing them in Camera Raw? If so, how?  Thank you for your help.

    This article may help you CreativeFriday – Before and After preview in Adobe Camera Raw (ACR) in Photoshop CC.

  • I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?

    I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?

    You cannot return to previous state. The update re-locked the iPhone
    to the original carrier. You must contact the original carrier to see if
    they offer unlocking and if you qualify.
    What does it say when you look at Settings=>General=>Carrier?
    Be advised that if your iPhone had previously been hacked/modified/
    jailbroken to work with other than original carrier, it may be impossible
    for the original carrier to unlock it properly.

  • How do I uninstall unwanted program or go back to a previous state?

    I have a Canon MP640. I found a Mac install dis that I didn't realise I had
    I tried to install. It reported that it failed 
    Now I notice some scan program icon on my top bar
    I dont want it
    I can see it in the applications folder
    + I have no idea what else might have been installed (even though the install said install had failed)
    1. How do I uninstall?
    2. How do I go back to a previous state? I only tried installing yesterday and nothing else has been installed since
    Thanks
    Omar

    See: https://discussions.apple.com/thread/2444988?tstart=0
    and: http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011 &PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=52 377
    and: https://discussions.apple.com/message/8942824#8942824
    So, if you see it in ->System Preferences->Users & Groups->[Login items], before you remove it with [-], control-click (right-click) the item and select Show in Finder to see where the program is located.

  • How to get the previous state of my data after issuing coomit method

    How to get the previous state of some date after issuing commit method in entity bean (It should not use any offline storage )

    >
    Is there any way to get the state apart from using
    offline storage ?As I said the caller keeps a copy in memory.
    Naturally if it is no longer in memory then that is a problem.
    >
    and also what do you mean by auditlog?
    You keep track of every change to the database by keeping the old data. There are three ways:
    1. Each table has a version number/delete flag for each record. A record is never updated nor deleted. Instead a new record is created with a new version number and with the new data.
    2. Each table has a duplicate table which has all of the same columns. When the first table is modified the old data is moved to the duplicate table.
    3. A single table is used which has columns for 'table', 'field', 'data' and 'activity' (update, delete). When a change is made in any table then this table is updated. This is generally of limited useability due to the difficulty in recovering the data.
    All of the above can have a user id, timestamp, and/or additional information which is relevant to the data being changed.
    Note that ALL of this is persisted storage.
    I am not sure what this really has to do with "offline storage" unless you are using that term to refer to backed up data which is not readily available.

  • Sleep occurs before previous statement execution?

    Hi Everyone,
    I'm writing a simple memory game in java for fun, as well as to learn a little more about java. I want it to work like a normal game of memory. Two cards are flipped, you have a few seconds to look at them provided they aren't a match, and then they flip back over.
    So I have the cards in my memory game implemented as an extension of the JButton class. In the ActionListener for these JButtons/Cards, I have created a custom event, which the main program listens for. When a card is flipped, the main program checks to see how many cards are flipped, and if it's two it checks to see if they are matches.
    If they aren't matches, it is supposed to wait three seconds and then flip the cards back over. I'm using Thread.sleep(3000), and the problem I'm having is that the application sleeps before it reaches the initial flip of the card. It's supposed to go CardFlipped>>Wait>>FlipBackOverIfNotMatch, but it's going Wait>>CardFlipped>>FlipBackOverIfNotMatch.
    So I'm a little confused. The statement to flip the card and show it's contents is definitely before the Thread.Sleep command, but sleep happens first for some strange reason. If I throw in a JOptionPane.showMessageDialog after the statement to flip the card, everything works correctly. It's as if the application is "jumping the gun", and showing a message forces it to finish previous statements before sleeping.
    Any Ideas? I could just find another way of doing it, but it bothers me that I can't figure out why this way doesn't work. Thanks in advance,
    -Kyle

    I don't do GUIs, and you haven't posted code, so I can't be sure of the details, but it sound like the sleep and the flip are in two different threads. You DO want you business logic to be separate from the thread that manipulates the GUI, so don't just go sticking random sleeps in the GUI thread.
    If you have, in a single thread,
    a();
    sleep();
    b();
    then it will execute in the order you specify, with no surprising behavior.
    I can't tell you exactly how to fix this, but I hope this will at least give you an idea of where to look.

  • Eroor after ligin - Unable to Recover Previous State

    Hi,
    I have fresh eBS vision installed on suse 9.0,
    1. I logging in to eBS home page
    2. I traing to open resposibility and getting error:
    'Error: Unable to Recover Previous State
    Transaction context has been lost for the page you requested. This error could have been caused by an expired user session or a system failure.'
    What does it means, how to avoid this error?
    Tnx,
    Edgar

    Did you re-run all the updates to get your computer back to the point it was at prior to "initilization" (by the way, "initialization" really refers just to formatting a disk and not all the subsequent OS installation, etc. that you did)? It is possible not all components of your applications are in synch with each other. I could easily see this happening with Quicktime and possibly Safari. Text Edit is probably so simple that it is not trying to interact with other components on the computer.
    Since Safari and Quicktime are easily available I would just download them and reinstall them.

  • Buttons to change to next/previous state not working

    Hi guys
    Apologies if you consider this an acrobat issue but I thought it was more indesign.
    I am trying to add in a slide show to my interactive pdf and I just can't get it to work.
    I've followed a couple of tutorials to the letter and when I preview in indesign the buttons work fine and the picture changes the next/previous state.  When I export to SWF, again, it works beautifully.  But as soon as I export to interactive PDF, the buttons dont work.
    I can only think this is either something in the export settings or something with my acrobat not letting it be interactive.
    I use CS5 and Acrobat X pro.
    Any ideas?  Literally nothing happens when I click on the buttons in the PDF.
    Thank you

    MSO….multi state object.
    Unsupported in PDF. Never has been.
    The only possible workaround is to create it in a different file, export as SWF and place the SWF into a PDF.
    Bob

  • How to revert a database back to one day previous state.

    Hi,
    Of course, if no backup, then no restore.
    However, unfortunately there is NO database backup available i.e. export/expdp/OS Backup/RMAN/Flashback. But, the requirement is to prepare another database on another server with one day back state. So, can we take fresh backup of the database which has all the archived logs, and restore it on another server as one day back previous state.
    Is there any possible way to do this by using existing archive logs? Can LogMiner help in this regard?
    Thanks,
    SYED.

    user3514623 wrote:
    Hi,
    Of course, if no backup, then no restore.
    However, unfortunately there is NO database backup available i.e. export/expdp/OS Backup/RMAN/Flashback. But, the requirement is to prepare another database on another server with one day back state. So, can we take fresh backup of the database which has all the archived logs, and restore it on another server as one day back previous state.
    Is there any possible way to do this by using existing archive logs? Can LogMiner help in this regard?
    Technically you could get lucky - but I wouldn't want to pretend that the following procedure is sensible or a safe way to back out a production system.
    If you have all the archived redo logs since the moment you want to get back to then you could, in principle, copy the database, run up logminer and extract all the UNDO_SQL that it gives you from the present back to the point in time you want to get to. You can then apply this, one transaction at a time, in reverse order of original application.
    Problems I can think of:
    <ul>
    a) It's likely to take a long time to do this, and you'll probably want to have a lot of manual control and checking.
    b) If you've done any drop tables or truncate tables in the interval you can't reverse them out.
    c) If you've done any nologging dataloads you won't be able to reverse those out
    d) There may be some data types that logminer won't cope with
    </ul>
    Other people may like to supply more reasons why this is not a good idea for a production system - but it might just be good enough to solve whatever problem you have.
    Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    http://www.jlcomp.demon.co.uk
    P.S. on "Forum Etiquette / Reward Points": http://forums.oracle.com/forums/ann.jspa?annID=718
    If you never mark your questions as answered people will eventually decide that it's not worth trying to answer you because they will never know whether or not their answer has been of any use, or whether you even bothered to read it.
    It is also important to mark answers that you thought helpful - again it lets other people know that you appreciate their help, but more importantly it also means that when you mark a bad or wrong answer as helpful someone may be prompted to tell you (and the rest of the forum) why the answer you found helpful is bad or wrong.

  • Just deleted a program can i restore back to previous state, just deleted a program can i restore back to previous state

    just deleted a program can i restore back to previous state,

    i havent lost any of my projects thats what i was worred about and wanted to know if i could recover ....
                                  Thanks for all your help guys..........

  • Applications no longer save their previous state

    It appears that my apps don't reopen to their last state. For example I can close safari with the red x and when I reopen it safari just goes to my home page.  Even if I had multiple tabs open it just opens a single tab with the homepage. Other apps seem to start from scratch as well. I have the restore option checked in system preferences. Both my IMac and my MacBook do this.

    I think I understand the problem. Maybe.
    You are not quitting the application when you click the red button. You are just closing the window. That makes the application think its previous state is "no windows", so it starts you off from scratch.
    Try this. Open Safari and some tabs. Don't close the window with the red button, but use Quit (command-q) from the Safari menu. Then start Safari again.
    P.S. If you DO close your Safari window with the red button, you can restore it immediately by using "Reopen Last Window" in the Safari History menu.
    charlie

  • Restoring Mac OS X to previous state

    How can I restore Mac OS X to it's previous state, before I installed some app? I know where this option is in Win XP, but don't know where it is in OS X.

    There is no such option with OS X.
    Which app did you install? If you want to restore OS X to it's previous state before an application was installed, remove/delete the application. If this application includes an uninstall feature, you should use it.
    Check Uninstalling Applications.

  • How do I restore a previous state on a pc?

    I got the new 4s today and I wanted to restore a previous back up state onto that phone. Doing this on my mac used to be easy. I'm doing this from my pc now but I don't know how to do that.

    This article will show you how: http://support.apple.com/kb/HT4946

Maybe you are looking for