Remote Access VPN to Site-to-Site VPN
We have a remote access VPN and a site-to-site VPN. Both work fine except that clients of the remote access VPN can not access hosts on the site-to-site VPN.
We are 10.5.5.0
Site-to-Site VPN goes to 10.2.2.0
Remote access clients can access anything on 10.5.5.0 but nothing on 10.2.2.0.
What needs to be done to allow this to happen?
Is this ASA/PIX 7?
You need to add the traffic between the lans to the nat exemption and crypto acls on the firewalls.
Headend Firewall
same-security-traffic permit intra-interface
access-list extended permit ip 10.2.2.0 255.255.255.0
Remote Firewall
access-list extended permit ip 10.2.2.0 255.255.255.0
access-list extended permit ip 10.2.2.0 255.255.255.0
Also, if you are split tunnelling you need to add the remote subnet to be tunneled.
Please rate helpful posts.
Similar Messages
-
I have always been able to remote access to my office email through VPN access. Now when I try to, a Java preference box pops up and there seems to be no way to get past it. Before, java would just load. Now it won't. I had my operating system upgraded and Java reinstalled but this did not solve the problem.
Any ideas?Please post a screenshot.
-
Is "remote access" is the best solution here?
Dear;Helpers
1st .. Thanks you anyway
that's my Topology in the figure
i57.tinypic.com/23mv5v9.png
Required:
To access the local website from the tow Ranges.
Suggestion:
To enable “remote access” for IIS (the local site) , so we can visit it on the Internet, or whatever the solution.
Note: Static IP is Supplied.
i know i can do it, if you helped me ..
need the steps..
A friend advised me to make a "remote desktop" instead of "enable routing & remote access"
could i?
Thanks all anywayHi,
Based on the figure you provided, I would like to know if the 192.168.3.0 network is a branch office in different location.
->To enable “remote access” for IIS (the local site), so we can visit it on the Internet.
If computers of the 192.168.3.0 network want to access the local website in 192.168.2.0 network through Internet, you should set up VPN connection. If you want to use remote desktop connection, the remote clients also need to connect to the 192.168.2.0 network
through Internet at first. And if the remote access clients connect to the 192.168.2.0 network through VPN, it can access the local site without other operation.
Best Regards,
Tina -
Routing and Remote Access Logs (Windows Server 2008 R2)
Hi,
I have a Windows 2008 R2 server running Routing and Remote access and users are using PPTP VPN's to connect to our network.
I have been asked to find logs for the following for connections in to our server
Username used for connection
Computer Name
IP Address used by computer connecting
Start/End time of VPN session
Date
Encryption used
I found an article stating to enable RRAS logs you need to run the following command
To enable RAS logs run command “netsh ras set tracing * enabled” and found a series of logs created in this location C:\Windows\tracing
None appear to contain the information I am looking for and was wondering if I was doing this correctly and if not how I am meant to extract this information?
If you require any more details just let me know.
Kind Regards
DavidHi,
I can’t sure which article you have read, but fur the 2008R2 the RAS to enable the log and the debug log in the KB is descried like this, I recommend you to try the KB
mentioned method.
To configure RRAS to enable logging
1. Start Server Manager. Click Start, click Administrative Tools, and then click Server Manager.
2. In the navigation tree, expand Roles, and then expand Network Policy and Access Services.
3. Right-click Routing and Remote Access, and then click Properties.
4. On the Logging tab, select Log errors only, Log errors and warnings, or Log all events, depending on how much information you want to capture.
5. Click OK to save your changes.
The related KB:
RRAS: Logging should be enabled on the RRAS server
http://technet.microsoft.com/zh-cn/library/ee922651(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Time too long for refresh a BO document in remote access connection
Hello,
One hour to refresh a bo document (.rep) in remote access connection with openvpn or cisco vpn behind a livebox or a 3G key while this take one minute in local network environment...
For information BO is on a vmware virtual machine and the database is on a iséries as400.
Thank's for your helpBO has no controls over VPN or network bamdwith, it takes what OS and DB drivers give it.
You'll need to identify at which point of the workflow to refresh the report the slowness is occuring.
You'll need to enable webi tracing and see how long the actual refresh take.
You'll need to enable network traces to see where in the network the slowdown is occuring. -
Vpn site to site and remote access , access lists
Hi all, we run remote access and site to site vpn on my asa, my question is Can I create an access list for the site to site tunnel, but still leave the remote access vpn to bypass the access list via the sysopt command, or if I turn this off will it affect both site to site and remote access vpn ?
If you turn off sysopt conn permit-vpn it will apply to both your site to site and remote access vpn...all ipsec traffic. You would have to use a vpn-filter for the site to site tunnel if you wanted to leave the sysopt in there.
-
Remote Access VPN with existing site-to-site tunnel
Hi there!
I have successfully configured my Cisco router to create a VPN tunnel to Azure. This is working fine. Now I am trying to add a remote access VPN for clients. I want to use IPsec and not PPTP.
I'm not a networking guy, but from what I've read, you basically need to add a dynamic crypto map for the remote access VPN to the crypto map on the external interface (AzureCryptoMap in this case). I've read that the dynamic crypto map should be applied after the non-dynamic maps.
The problem is that the VPN clients do not successfully negotiate phase 1. It's almost like the router does not try the dynamic map. I have tried specifying it to come ahead of the static crypto map policy, but this doesn't change anything. Here is some output from the debugging ipsec and isakmp:
murasaki#
*Oct 6 08:06:43: ISAKMP (0): received packet from 1.158.149.255 dport 500 sport 500 Global (N) NEW SA
*Oct 6 08:06:43: ISAKMP: Created a peer struct for 1.158.149.255, peer port 500
*Oct 6 08:06:43: ISAKMP: New peer created peer = 0x87B97490 peer_handle = 0x80000082
*Oct 6 08:06:43: ISAKMP: Locking peer struct 0x87B97490, refcount 1 for crypto_isakmp_process_block
*Oct 6 08:06:43: ISAKMP: local port 500, remote port 500
*Oct 6 08:06:43: ISAKMP:(0):insert sa successfully sa = 886954D0
*Oct 6 08:06:43: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Oct 6 08:06:43: ISAKMP:(0):Old State = IKE_READY New State = IKE_R_MM1
*Oct 6 08:06:43: ISAKMP:(0): processing SA payload. message ID = 0
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 69 mismatch
*Oct 6 08:06:43: ISAKMP (0): vendor ID is NAT-T RFC 3947
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 198 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 29 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 245 mismatch
*Oct 6 08:06:43: ISAKMP (0): vendor ID is NAT-T v7
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 114 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 227 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 250 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 157 mismatch
*Oct 6 08:06:43: ISAKMP:(0): vendor ID is NAT-T v3
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 164 mismatch
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
*Oct 6 08:06:43: ISAKMP:(0): vendor ID is NAT-T v2
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID seems Unity/DPD but major 242 mismatch
*Oct 6 08:06:43: ISAKMP:(0): vendor ID is XAUTH
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID is Unity
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): processing IKE frag vendor id payload
*Oct 6 08:06:43: ISAKMP:(0):Support for IKE Fragmentation not enabled
*Oct 6 08:06:43: ISAKMP:(0): processing vendor id payload
*Oct 6 08:06:43: ISAKMP:(0): vendor ID is DPD
*Oct 6 08:06:43: ISAKMP:(0):No pre-shared key with 1.158.149.255!
*Oct 6 08:06:43: ISAKMP : Scanning profiles for xauth ... Client-VPN
*Oct 6 08:06:43: ISAKMP:(0): Authentication by xauth preshared
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 1 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 2 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 3 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 4 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 5 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 6 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 7 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 8 against priority 1 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 1 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 2 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 3 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 4 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 5 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 6 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 7 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 8 against priority 2 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 2 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Proposed key length does not match policy
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 3 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 256
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 4 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption AES-CBC
*Oct 6 08:06:43: ISAKMP: keylength of 128
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 5 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 6 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption 3DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 7 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash SHA
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 6 08:06:43: ISAKMP:(0):Checking ISAKMP transform 8 against priority 10 policy
*Oct 6 08:06:43: ISAKMP: life type in seconds
*Oct 6 08:06:43: ISAKMP: life duration (basic) of 3600
*Oct 6 08:06:43: ISAKMP: encryption DES-CBC
*Oct 6 08:06:43: ISAKMP: auth XAUTHInitPreShared
*Oct 6 08:06:43: ISAKMP: hash MD5
*Oct 6 08:06:43: ISAKMP: default group 2
*Oct 6 08:06:43: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 6 08:06:43: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 6 08:06:43: ISAKMP:(0):no offers accepted!
*Oct 6 08:06:43: ISAKMP:(0): phase 1 SA policy not acceptable! (local x.x.x.x remote 1.158.149.255)
*Oct 6 08:06:43: ISAKMP (0): incrementing error counter on sa, attempt 1 of 5: construct_fail_ag_init
*Oct 6 08:06:43: ISAKMP:(0): Failed to construct AG informational message.
*Oct 6 08:06:43: ISAKMP:(0): sending packet to 1.158.149.255 my_port 500 peer_port 500 (R) MM_NO_STATE
*Oct 6 08:06:43: ISAKMP:(0):Sending an IKE IPv4 Packet.
*Oct 6 08:06:43: ISAKMP:(0):peer does not do paranoid keepalives.
*Oct 6 08:06:43: ISAKMP:(0):deleting SA reason "Phase1 SA policy proposal not accepted" state (R) MM_NO_STATE (peer 1.158.149.255)
*Oct 6 08:06:43: ISAKMP (0): FSM action returned error: 2
*Oct 6 08:06:43: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
*Oct 6 08:06:43: ISAKMP:(0):Old State = IKE_R_MM1 New State = IKE_R_MM1
*Oct 6 08:06:43: ISAKMP:(0):deleting SA reason "Phase1 SA policy proposal not accepted" state (R) MM_NO_STATE (peer 1.158.149.255)
*Oct 6 08:06:43: ISAKMP: Unlocking peer struct 0x87B97490 for isadb_mark_sa_deleted(), count 0
*Oct 6 08:06:43: ISAKMP: Deleting peer node by peer_reap for 1.158.149.255: 87B97490
*Oct 6 08:06:43: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
*Oct 6 08:06:43: ISAKMP:(0):Old State = IKE_R_MM1 New State = IKE_DEST_SA
*Oct 6 08:06:43: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*Oct 6 08:06:47: ISAKMP (0): received packet from 1.158.149.255 dport 500 sport 500 Global (R) MM_NO_STATEmurasaki#
*Oct 6 08:06:43: ISAKMP (0): received packet from 1.158.149.255 dport 500 sport 500 Global (N) NEW SA
*Oct 6 08:06:43: ISAKMP: Created a peer struct for 1.158.149.255, peer port 500
*Oct 6 08:06:43: ISAKMP: New peer created peer = 0x87B97490 peer_handle = 0x80000082
*Oct 6 08:06:43: ISAKMP: Locking peer struct 0x87B97490, refcount 1 for crypto_isakmp_process_block
*Oct 6 08:06:43: ISAKMP: local port 500, remote port 500
*Oct 6 08:06:43: ISAKMP:(0):insert sa successfully sa = 886954D0
*Oct 6 08:06:43: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Oct 6 08:06:43: ISAKMP:(0):Old State = IKE_READY New State = IKE_R_MM1
If I specify my key like a site-to-site VPN key like this:
crypto isakmp key xxx address 0.0.0.0
Then it does complete phase 1 (and then fails to find the client configuration). This suggests to me that the dynamic map is not being tried.
Configuration:
! Last configuration change at 07:55:02 AEDT Mon Oct 6 2014 by timothy
version 15.2
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
no service dhcp
hostname murasaki
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
aaa new-model
aaa authentication login client_vpn_authentication local
aaa authorization network default local
aaa authorization network client_vpn_authorization local
aaa session-id common
wan mode dsl
clock timezone AEST 10 0
clock summer-time AEDT recurring 1 Sun Oct 2:00 1 Sun Apr 3:00
ip inspect name normal_traffic tcp
ip inspect name normal_traffic udp
ip domain name router.xxx
ip name-server xxx
ip name-server xxx
ip cef
ipv6 unicast-routing
ipv6 cef
crypto pki trustpoint TP-self-signed-591984024
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-591984024
revocation-check none
rsakeypair TP-self-signed-591984024
crypto pki trustpoint TP-self-signed-4045734018
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-4045734018
revocation-check none
rsakeypair TP-self-signed-4045734018
crypto pki certificate chain TP-self-signed-591984024
crypto pki certificate chain TP-self-signed-4045734018
object-group network CLOUD_SUBNETS
description Azure subnet
172.16.0.0 255.252.0.0
object-group network INTERNAL_LAN
description All Internal subnets which should be allowed out to the Internet
192.168.1.0 255.255.255.0
192.168.20.0 255.255.255.0
username timothy privilege 15 secret 5 xxx
controller VDSL 0
ip ssh version 2
no crypto isakmp default policy
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
lifetime 3600
crypto isakmp policy 2
encr 3des
hash md5
authentication pre-share
group 2
lifetime 3600
crypto isakmp policy 10
encr aes 256
authentication pre-share
group 2
lifetime 28800
crypto isakmp key xxx address xxxx no-xauth
crypto isakmp client configuration group VPN_CLIENTS
key xxx
dns 192.168.1.24 192.168.1.20
domain xxx
pool Client-VPN-Pool
acl CLIENT_VPN
crypto isakmp profile Client-VPN
description Remote Client IPSec VPN
match identity group VPN_CLIENTS
client authentication list client_vpn_authentication
isakmp authorization list client_vpn_authorization
client configuration address respond
crypto ipsec transform-set AzureIPSec esp-aes 256 esp-sha-hmac
mode tunnel
crypto ipsec transform-set TRANS_3DES_SHA esp-3des esp-sha-hmac
mode tunnel
crypto dynamic-map ClientVPNCryptoMap 1
set transform-set TRANS_3DES_SHA
set isakmp-profile Client-VPN
reverse-route
qos pre-classify
crypto map AzureCryptoMap 12 ipsec-isakmp
set peer xxxx
set security-association lifetime kilobytes 102400000
set transform-set AzureIPSec
match address AzureEastUS
crypto map AzureCryptoMap 65535 ipsec-isakmp dynamic ClientVPNCryptoMap
bridge irb
interface ATM0
mtu 1492
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface Ethernet0
no ip address
shutdown
interface FastEthernet0
switchport mode trunk
no ip address
interface FastEthernet1
no ip address
spanning-tree portfast
interface FastEthernet2
switchport mode trunk
no ip address
spanning-tree portfast
interface FastEthernet3
no ip address
interface GigabitEthernet0
switchport mode trunk
no ip address
interface GigabitEthernet1
no ip address
shutdown
duplex auto
speed auto
interface Vlan1
description Main LAN
ip address 192.168.1.97 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
interface Dialer1
mtu 1492
ip address negotiated
ip access-group PORTS_ALLOWED_IN in
ip flow ingress
ip inspect normal_traffic out
ip nat outside
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1350
dialer pool 1
dialer-group 1
ipv6 address autoconfig
ipv6 enable
ppp chap hostname xxx
ppp chap password 7 xxx
ppp ipcp route default
no cdp enable
crypto map AzureCryptoMap
ip local pool Client-VPN-Pool 192.168.20.10 192.168.20.15
no ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat translation timeout 360
ip nat inside source list SUBNETS_AND_PROTOCOLS_ALLOWED_OUT interface Dialer1 overload
ip nat inside source static tcp 192.168.1.43 55663 interface Dialer1 55663
ip nat inside source static tcp 192.168.1.43 22 interface Dialer1 22
ip nat inside source static udp 192.168.1.43 55663 interface Dialer1 55663
ip access-list extended AzureEastUS
permit ip 192.168.20.0 0.0.0.255 172.16.0.0 0.15.255.255
permit ip 192.168.1.0 0.0.0.255 172.16.0.0 0.15.255.255
ip access-list extended CLIENT_VPN
permit ip 172.16.0.0 0.0.0.255 192.168.20.0 0.0.0.255
permit ip 192.168.1.0 0.0.0.255 192.168.20.0 0.0.0.255
ip access-list extended PORTS_ALLOWED_IN
remark List of ports which are allowed IN
permit gre any any
permit esp any any
permit udp any any eq non500-isakmp
permit udp any any eq isakmp
permit tcp any any eq 55663
permit udp any any eq 55663
permit tcp any any eq 22
permit tcp any any eq 5723
permit tcp any any eq 1723
permit tcp any any eq 443
permit icmp any any echo-reply
permit icmp any any traceroute
permit icmp any any port-unreachable
permit icmp any any time-exceeded
deny ip any any
ip access-list extended SUBNETS_AND_PROTOCOLS_ALLOWED_OUT
deny tcp object-group INTERNAL_LAN any eq smtp
deny ip object-group INTERNAL_LAN object-group CLOUD_SUBNETS
permit tcp object-group INTERNAL_LAN any
permit udp object-group INTERNAL_LAN any
permit icmp object-group INTERNAL_LAN any
deny ip any any
mac-address-table aging-time 16
no cdp run
ipv6 route ::/0 Dialer1
route-map NoNAT permit 10
match ip address AzureEastUS CLIENT_VPN
route-map NoNAT permit 15
banner motd Welcome to Murasaki
line con 0
privilege level 15
no modem enable
line aux 0
line vty 0
privilege level 15
no activation-character
transport preferred none
transport input ssh
line vty 1 4
privilege level 15
transport input ssh
scheduler max-task-time 5000
scheduler allocate 60000 1000
ntp update-calendar
ntp server au.pool.ntp.org
end
Any ideas on what I'm doing wrong?Hi Marius,
I finally managed to try with the official Cisco VPN client on Windows. It still fails at phase 1, but now talks about 'aggressive mode', which didn't seem to be mentioned in the previous logs. Any ideas?
*Oct 9 20:43:16: ISAKMP (0): received packet from 192.168.1.201 dport 500 sport 49727 Global (N) NEW SA
*Oct 9 20:43:16: ISAKMP: Created a peer struct for 192.168.1.201, peer port 49727
*Oct 9 20:43:16: ISAKMP: New peer created peer = 0x878329F0 peer_handle = 0x80000087
*Oct 9 20:43:16: ISAKMP: Locking peer struct 0x878329F0, refcount 1 for crypto_isakmp_process_block
*Oct 9 20:43:16: ISAKMP: local port 500, remote port 49727
*Oct 9 20:43:16: ISAKMP:(0):insert sa successfully sa = 886697E0
*Oct 9 20:43:16: ISAKMP:(0): processing SA payload. message ID = 0
*Oct 9 20:43:16: ISAKMP:(0): processing ID payload. message ID = 0
*Oct 9 20:43:16: ISAKMP (0): ID payload
next-payload : 13
type : 11
group id : timothy
protocol : 17
port : 500
length : 15
*Oct 9 20:43:16: ISAKMP:(0):: peer matches *none* of the profiles
*Oct 9 20:43:16: ISAKMP:(0): processing vendor id payload
*Oct 9 20:43:16: ISAKMP:(0): vendor ID seems Unity/DPD but major 215 mismatch
*Oct 9 20:43:16: ISAKMP:(0): vendor ID is XAUTH
*Oct 9 20:43:16: ISAKMP:(0): processing vendor id payload
*Oct 9 20:43:16: ISAKMP:(0): vendor ID is DPD
*Oct 9 20:43:16: ISAKMP:(0): processing vendor id payload
*Oct 9 20:43:16: ISAKMP:(0): processing IKE frag vendor id payload
*Oct 9 20:43:16: ISAKMP:(0):Support for IKE Fragmentation not enabled
*Oct 9 20:43:16: ISAKMP:(0): processing vendor id payload
*Oct 9 20:43:16: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
*Oct 9 20:43:16: ISAKMP:(0): vendor ID is NAT-T v2
*Oct 9 20:43:16: ISAKMP:(0): processing vendor id payload
*Oct 9 20:43:16: ISAKMP:(0): vendor ID is Unity
*Oct 9 20:43:16: ISAKMP : Scanning profiles for xauth ... Client-VPN
*Oct 9 20:43:16: ISAKMP:(0): Authentication by xauth preshared
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 1 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 2 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 3 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 4 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 5 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 6 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 7 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 8 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 9 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 10 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 11 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Preshared authentication offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 12 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 13 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 14 against priority 1 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 1 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 2 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 3 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 4 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 5 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 6 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 7 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 8 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 9 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 10 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 11 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 12 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Preshared authentication offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 13 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 14 against priority 2 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 1 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Xauth authentication by pre-shared key offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 2 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 3 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Preshared authentication offered but does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 4 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 256
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 5 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Proposed key length does not match policy
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 6 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 7 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Proposed key length does not match policy
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 8 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption AES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP: keylength of 128
*Oct 9 20:43:16: ISAKMP:(0):Hash algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 9 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 10 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 11 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash SHA
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 12 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption 3DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 13 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth XAUTHInitPreShared
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 3
*Oct 9 20:43:16: ISAKMP:(0):Checking ISAKMP transform 14 against priority 10 policy
*Oct 9 20:43:16: ISAKMP: encryption DES-CBC
*Oct 9 20:43:16: ISAKMP: hash MD5
*Oct 9 20:43:16: ISAKMP: default group 2
*Oct 9 20:43:16: ISAKMP: auth pre-share
*Oct 9 20:43:16: ISAKMP: life type in seconds
*Oct 9 20:43:16: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B
*Oct 9 20:43:16: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Oct 9 20:43:16: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Oct 9 20:43:16: ISAKMP:(0):no offers accepted!
*Oct 9 20:43:16: ISAKMP:(0): phase 1 SA policy not acceptable! (local xxxx remote 192.168.1.201)
*Oct 9 20:43:16: ISAKMP (0): incrementing error counter on sa, attempt 1 of 5: construct_fail_ag_init
*Oct 9 20:43:16: ISAKMP:(0): Failed to construct AG informational message.
*Oct 9 20:43:16: ISAKMP:(0): sending packet to 192.168.1.201 my_port 500 peer_port 49727 (R) AG_NO_STATE
*Oct 9 20:43:16: ISAKMP:(0):Sending an IKE IPv4 Packet.
*Oct 9 20:43:16: ISAKMP:(0):peer does not do paranoid keepalives.
*Oct 9 20:43:16: ISAKMP:(0):deleting SA reason "Phase1 SA policy proposal not accepted" state (R) AG_NO_STATE (peer 192.168.1.201)
*Oct 9 20:43:16: ISAKMP:(0): processing KE payload. message ID = 0
*Oct 9 20:43:16: ISAKMP:(0): group size changed! Should be 0, is 128
*Oct 9 20:43:16: ISAKMP (0): incrementing error counter on sa, attempt 2 of 5: reset_retransmission
*Oct 9 20:43:16: ISAKMP (0): Unknown Input IKE_MESG_FROM_PEER, IKE_AM_EXCH: state = IKE_READY
*Oct 9 20:43:16: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
*Oct 9 20:43:16: ISAKMP:(0):Old State = IKE_READY New State = IKE_READY
*Oct 9 20:43:16: %CRYPTO-6-IKMP_MODE_FAILURE: Processing of Aggressive mode failed with peer at 192.168.1.201
*Oct 9 20:43:16: ISAKMP:(0):deleting SA reason "Phase1 SA policy proposal not accepted" state (R) AG_NO_STATE (peer 192.168.1.201)
*Oct 9 20:43:16: ISAKMP: Unlocking peer struct 0x878329F0 for isadb_mark_sa_deleted(), count 0
*Oct 9 20:43:16: ISAKMP: Deleting peer node by peer_reap for 192.168.1.201: 878329F0
*Oct 9 20:43:16: ISAKMP:(0):Input = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
*Oct 9 20:43:16: ISAKMP:(0):Old State = IKE_READY New State = IKE_DEST_SA
*Oct 9 20:43:16: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*Oct 9 20:43:21: ISAKMP (0): received packet from 192.168.1.201 dport 500 sport 49727 Global (R) MM_NO_STATE
*Oct 9 20:43:26: ISAKMP (0): received packet from 192.168.1.201 dport 500 sport 49727 Global (R) MM_NO_STATE -
Remote access to site-to-site VPN
We currently have a site-to-site VPN set up over a private line between our two datacenters. Hosts at site A can talk to hosts at site B, and hosts at site B can talk to hosts at site A.
I recently set up a remote access VPN at site A. VPN clients can access all of the resources behind the ASA at site A without an issue. However, strange things happen when they try to contact site B.
I've set up matching NAT exemptions on each side of the connection. The remote site is not reporting any anomalies. When attempting to connect to a remote VPN client from site B, the only errors that show up are on the ASA at site A. When a remote client tries to connect to a host at site B, the following errors show up in the log:
%ASA-3-305005: No translation group found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22
I have the following NAT exemption set up at site A:
access-list nonat; 3 elements
access-list nonat line 1 extended permit ip 10.1.0.0 255.255.0.0 10.0.0.0 255.255.0.0 (hitcnt=0)
access-list nonat line 2 extended permit ip 10.1.0.0 255.255.0.0 10.3.0.0 255.255.255.0 (hitcnt=0)
access-list nonat line 3 extended permit ip 10.3.0.0 255.255.255.0 10.0.0.0 255.255.0.0 (hitcnt=0)
I've been working on this for a few days now, and am hesitant to open up a TAC ticket. I've seen a few similar issues on the forums, but have found none with a working solution. I attempted to follow the tech notes on the Cisco Web site for a similar configuration, but had no luck.
By the way, I have enabled same-security-traffic on both intra-interface and inter-interface.
Any help would be much appreciated.ASA HUB, is this your topology? if so try bellow suggestions.
Inside Net 10.1.1.0/16
ds3 net 172.16.0.0/28 - far end net through L2L Tunnel 10.0.0.0/16
VPN RA Net 10.3.0.0/24
For RA to gain access to far end hosts of L2L tunnel you will need nonat exempt rule applied to ds3 interface.
based on log
%ASA-3-305005: No translation group found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22
Try this
no access-list test extended permit ip 10.3.0.0 255.255.255.0 10.0.0.0 255.255.0.0
access-list test extended permit ip 10.0.0.0 255.255.0.0 10.3.0.0 255.255.255.0
nat (ds3) 0 access-list test
on the far end of the tunnel (Spoke) you have to permit the RA network comming from the ASA HUB in the interesting traffic.
Let us know how it works out
Regards -
Site to Site and Remote Access VPN
Hi All,
Is it possible to configure Site to Site and Remote Access VPN on same interface of Cisco ASA 5505 ?
Regards
Abhishek
This topic first appeared in the Spiceworks CommunityA document exists where PIX/ASA maintains LAN-ti-LAN IPsec tunnel at two end points and there is overlapping networks at ther inside interface of both the asa. Probably, the basic configuration for both asa and IOS routers are nat config. So, this particular document might be useful for your requirement
PIX/ASA 7.x and later: Site to Site (L2L) IPsec VPN with Policy NAT (Overlapping Private Networks) Configuration Example
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml -
ASA 5505 Site-to-Site VPN to remote dmz access
I don't have a ton of experience with ASA firewalls, but I've searched everywhere and I can't seem to find a solution to this.
I have 2 sites connected by a Site-to-Site VPN with ASAs (5540 on Site 1, 5505 on Site 2). I'm using ASDM.
Lets call:
Site 1 LAN: 192.168.1.0
Site 2 LAN: 192.168.2.0
Site 2 DMZ: 172.16.2.0
Traffic from Site 1 to Site 2 is perfect moving across the LANs. My workstation (192.168.1.10) can ping anything in site 2s LAN (192.168.2.0/24).
Recently, I added a UniFi WAP device to Site 2 DMZ. Since I want to be able to manage this DMZ WAP from the LAN with a management server, I created a network object in Site 2s ASA. I called this object DMZ_WAP. IP address 172.16.2.2. I checked the box for "Add Automatic Address Translation Rules" and configured Type to "Static" and Translated Addr to "192.168.2.8." Source interface DMZ to Any destination interface. This of course created 2 "Network Object" NAT rules.
I then created a DMZ incoming rule that says Source: DMZ_WAP, Destination: net_site1_lan (this object was of course created for the site to site vpn), allow all IP traffic. I created an Outside incoming rule that says net_site1_lan can access DMZ_WAP.
Awesome, I can now ping 192.168.2.8 from anywhere within Site 2. The problem is... I can't ping 192.168.2.8 from my workstation in site 1 (192.168.1.10). If I run Packet Tracer (interface dmz, packet type TCP, source 172.16.2.2 port "echo", destination 192.168.1.10 port "echo") everything turns up green checkmark, the packet is allowed. So why do I have no contact?
I apologize, as I realize ASDM isnt what most of you probably use. But anyone have any ideas? Been researching this for about 4 hours now, perhaps I'm barking up the wrong tree.
Thanks,
GarrickHere's my sanitized config. Any help would be greatly appreciated. Again, the point is simply to make the object SITE2_DMZ_WAP that is off of the "dmz" interface talk with SITE1 over the site to site VPN. I can't let any other traffic through except this one IP. I currently have it NATd.
ASA Version 8.4(1)
no names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.21.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address -OMITTED- 255.255.255.248
interface Vlan3
no forward interface Vlan1
nameif dmz
security-level 50
ip address 172.16.21.1 255.255.255.0
interface Ethernet0/0
description Outside WAN1 port
switchport access vlan 2
interface Ethernet0/1
description Inside LAN port
interface Ethernet0/2
description Inside LAN port
interface Ethernet0/3
description Outside DMZ port
switchport access vlan 3
interface Ethernet0/4
description Outside DMZ port
switchport access vlan 3
interface Ethernet0/5
description Outside DMZ port
switchport access vlan 3
interface Ethernet0/6
description Outside DMZ port
switchport access vlan 3
interface Ethernet0/7
description Outside DMZ port
switchport access vlan 3
boot system disk0:/asa841-k8.bin
ftp mode passive
clock timezone
clock summer-time PDT recurring
dns server-group DefaultDNS
domain-name -OMITTED-
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network net_SITE1_lan
subnet 192.168.1.0 255.255.255.0
object network net_SITE2_lan
subnet 192.168.21.0 255.255.255.0
object network net_SITE1_dmz
subnet 172.16.1.0 255.255.255.0
object network net_SITE2_dmz
subnet 172.16.21.0 255.255.255.0
object network SITE2_DMZ_WAP
host 172.16.21.2
object network 192.168.21.8
host 192.168.21.8
description FOR SITE2 WAP
access-list inside_access_in extended permit ip object net_SITE2_lan any
access-list inside_access_in extended deny tcp any any eq smtp
access-list outside_cryptomap extended permit ip object net_SITE2_lan object net_SITE1_lan
pager lines 24
logging enable
logging buffer-size 16384
logging buffered notifications
logging asdm notifications
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination inside 192.168.1.35 2055
flow-export template timeout-rate 1
flow-export delay flow-create 15
mtu inside 1500
mtu outside 1500
mtu dmz 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-643.bin
no asdm history enable
arp timeout 14400
nat (inside,outside) source static net_SITE2_lan net_SITE2_lan destination static net_SITE1_lan net_SITE1_lan
object network obj_any
nat (inside,outside) dynamic interface
object network SITE2_DMZ_WAP
nat (dmz,any) static 192.168.21.8
nat (inside,outside) after-auto source dynamic any interface
nat (dmz,outside) after-auto source dynamic any interface
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 162.227.34.22 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication telnet console LOCAL
aaa authentication serial console LOCAL
aaa authorization exec LOCAL
http server enable
http server idle-timeout 60
http 192.168.0.0 255.255.0.0 inside
http 0.0.0.0 0.0.0.0 outside
snmp-server host inside 192.168.1.35 community ***** version 2c
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto map CMAP_OUTSIDE 1 match address outside_cryptomap
crypto map CMAP_OUTSIDE 1 set peer -PEER OMITTED-
crypto map CMAP_OUTSIDE 1 set ikev1 transform-set ESP-AES-128-SHA
crypto map CMAP_OUTSIDE 1 set reverse-route
crypto map CMAP_OUTSIDE interface outside
crypto ikev1 enable outside
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.0.0 255.255.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 60
ssh version 2
console timeout 60
management-access inside
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd dns 192.168.2.2 192.168.1.6 interface inside
dhcpd lease 34000 interface inside
dhcpd domain -DOMAIN OMITTED- interface inside
dhcpd update dns both interface inside
dhcpd address 172.16.21.100-172.16.21.200 dmz
dhcpd dns 8.8.8.8 8.8.4.4 interface dmz
dhcpd lease 34000 interface dmz
dhcpd enable dmz
priority-queue outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server -NTP SERVERS OMITTED-
ntp server -NTP SERVERS OMITTED-
webvpn
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
vpn-tunnel-protocol ikev1
username -OMITTED- password -OMITTED- encrypted privilege 15
tunnel-group -IP OMITTED- type ipsec-l2l
tunnel-group -IP OMITTED- general-attributes
default-group-policy GroupPolicy1
tunnel-group -IP OMITTED- ipsec-attributes
ikev1 pre-shared-key *****
isakmp keepalive threshold 10 retry 5
class-map netflow-export-class
match any
class-map inspection_default
match default-inspection-traffic
class-map QoS_RDP
match access-list QoS_RDP_Server_Branch
class-map QoS_EA
match port tcp eq 2000
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns
inspect ftp
inspect http
inspect icmp
inspect icmp error
inspect ils
inspect ip-options
inspect ipsec-pass-thru
inspect pptp
inspect rsh
inspect rtsp
inspect sip
inspect snmp
inspect xdmcp
class netflow-export-class
flow-export event-type all destination 192.168.1.35
class QoS_RDP
priority
class QoS_EA
priority
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Logoff -
Routing Issue for Remote Access Clients over Site to Site VPN tunnels
I have a customer that told me that Cisco has an issue when a customer has a topology of let's say 3 sites that have site to site tunnels built and a Remote Access client connects to site A and needs resources at Site B but the PIX won't route to that site. Has this been fixed in the ASA?
Patrick, that was indeed true for a long time.
But now it is fixed in PIX and ASA version 7.x.
Please refer to this document for details:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml -
Internet connexion problem for remote site in Site to site VPN asa 5505
Hi all
I'm configuring a site to site Ipsec VPN in 2 sites using ASA 5505 V 8.2, The VPN is working fine i can ping machine in the 2 sides but the problem is the remote site dont' have internet.
The architecture is, we 2 site Site1 is the main site and Site2 is secondary site there will be Site3, ...
The internet connection is based in Site1 and site2 and site 3 will have internet connection through Site1. Site1, Site2 and Site 3 is interconnected by Ipsec VPN.
Here is my ASA 5505 Configuration :
SITE 1:
ASA Version 8.2(5)
hostname test-malabo
domain-name test.mg
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd ta.qizy4R//ChqQH encrypted
names
interface Ethernet0/0
description "Sortie Internet"
switchport access vlan 2
interface Ethernet0/1
description "Interconnexion"
switchport access vlan 171
interface Ethernet0/2
description "management"
switchport access vlan 10
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 41.79.49.42 255.255.255.192
interface Vlan10
nameif mgmt
security-level 0
ip address 10.12.1.100 255.255.0.0
interface Vlan171
nameif interco
security-level 0
ip address 10.22.19.254 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name test.mg
object-group network LAN-MALABO
description LAN DE MALABO
network-object 192.168.1.0 255.255.255.0
object-group network LAN-BATA
description LAN DE BATA
network-object 192.168.2.0 255.255.255.0
object-group network LAN-LUBA
description LAN DE LUBA
network-object 192.168.3.0 255.255.255.0
access-list interco_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
pager lines 24
mtu inside 1500
mtu outside 1500
mtu mgmt 1500
mtu interco 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any outside
icmp permit any interco
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (interco) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 41.79.49.1 1
route interco 192.168.3.0 255.255.255.0 10.22.19.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map interco_map0 1 match address interco_1_cryptomap
crypto map interco_map0 1 set pfs group1
crypto map interco_map0 1 set peer 10.22.19.5
crypto map interco_map0 1 set transform-set ESP-3DES-SHA
crypto map interco_map0 interface interco
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto isakmp enable interco
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.1.0 255.255.255.0 inside
telnet 10.12.0.0 255.255.0.0 mgmt
telnet timeout 30
ssh 192.168.1.0 255.255.255.0 inside
ssh 10.12.0.0 255.255.0.0 mgmt
ssh timeout 30
console timeout 0
management-access interco
dhcpd option 3 ip 192.168.1.1
dhcpd address 192.168.1.100-192.168.1.254 inside
dhcpd dns 41.79.48.66 8.8.8.8 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password eY/fQXw7Ure8Qrz7 encrypted privilege 15
tunnel-group 10.22.19.5 type ipsec-l2l
tunnel-group 10.22.19.5 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 60 retry 5
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect snmp
inspect icmp
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:5aa0d27f15e49ea597c8097cfdb755b8
: end
SITE2:
ASA Version 8.2(5)
hostname test-luba
domain-name test.eg
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
description "Sortie Interco-Internet"
switchport access vlan 2
interface Ethernet0/1
description "management"
switchport access vlan 10
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.3.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 10.22.19.5 255.255.255.0
interface Vlan10
nameif mgmt
security-level 0
ip address 10.12.1.101 255.255.0.0
ftp mode passive
dns server-group DefaultDNS
domain-name test.eg
object-group network LAN-MALABO
description LAN DE MALABO
network-object 192.168.1.0 255.255.255.0
object-group network LAN-BATA
description LAN DE BATA
network-object 192.168.2.0 255.255.255.0
object-group network LAN-LUBA
description LAN DE LUBA
network-object 192.168.3.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.3.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.3.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
mtu inside 1500
mtu outside 1500
mtu mgmt 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside) 0 access-list inside_nat0_outbound
route outside 0.0.0.0 0.0.0.0 10.22.19.254 1
route outside 192.168.1.0 255.255.255.0 10.22.19.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map0 1 match address outside_1_cryptomap
crypto map outside_map0 1 set pfs group1
crypto map outside_map0 1 set peer 10.22.19.254
crypto map outside_map0 1 set transform-set ESP-3DES-SHA
crypto map outside_map0 interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 10.12.0.0 255.255.0.0 mgmt
telnet timeout 30
ssh 192.168.3.0 255.255.255.0 inside
ssh 10.12.0.0 255.255.0.0 mgmt
ssh timeout 30
console timeout 0
management-access outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password eY/fQXw7Ure8Qrz7 encrypted privilege 15
tunnel-group 10.22.19.254 type ipsec-l2l
tunnel-group 10.22.19.254 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 60 retry 5
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:185bd689118ba24f9a0ef2f7e80494f6
Can anybody help why my remote site can't connect to Internet.
REgards,
RaitsarevoHi Carv,
Thanks for your reply. i have done finally
i used no crypto ipsec nat-transparency udp-encapsulation in my end router only.
and in remote access VPN i have enabled UDP for client configuration. the most imprtant is i have given IP add of same LAN pool to VPN user,
Regards,
Satya.M -
Access Site to Site Networks behind Cisco ASA thru VPN Client
I have configured remote access thru asa for vpn clients to our main network. I can ping the required networks from vpn client. Internally I can ping remote network thru our sonicwall site to site vpn. I however cannot ping the remote network from the vpn client. I've added the network in the configuration on the ASA that I am trying to connect to. Any ideas what I can do so I can connect to Site B thru my vpn client connecting to Site A?
Thanks,
MattHello, matt0000111111.
Did you add a VPN clients network to the sit-to-site VPN settings and to the NAT list (if nat exist at the interfaces at site-to-site vpn)? -
Access Site to Site from SSL VPN. ISA 570 & ASA 5505
I have an Site to Site network between my ISA 570 and my ASA 5505.
On the ISA 570 side I have the network 192.168.0.0/24 and remote users that are connecting via AnyConnect are in the 192.168.190.0/24
On the ASA 5505 side I have the netowrk 192.168.200.0/24
The Site to Site is working properly i can reach the networks from both sides.
But when I am connected via AnyConnect to the ISA firewall I will also access the 192.168.200.0/24 network on the ASA side.
I have made an firewall (in the ISA 570) rule that are allowing traffic from SSLVPN to VPN, but I need to nat the traffic from the 192.168.190.0/24 to 192.168.200.0/24 otherwise the ASA are blocking the traffic. I can solve the problem in the ASA but i want to solve it in the ISA 570.I have solved my problem.
Just added an Advanced NAT.
From: Any (this will be changed to proper network later)
To: Any (this will be changed to proper network later)
Original Source Adress: Any (this will be changed to proper network later)
Original Destination Adress: Site_B (192.168.200.0/24)
Original services: Any
Translated source adress: IP of my ISA 570 (192.168.0.1)
Translated destination adress: Site_B (192.168.200.0/24)
Translated services: Any -
Setting up site-to-site and remote vpn on isa570w
Hi folks...
I have 2 new isa570w's....
I'm setting up two offices with dedicated site-to-site VPN. Have that working great, but the office needs remote access as well to either of the offices. I have been unsuccessful so far in getting this to work. The remote access needs to include iPad access as well.
Any pointers would be most appreciated! Thanks!
KimHi,
Just as Bill mentioned, the site to site VPN have may steps to deploy because it close bond your current environment, about how to deploy the site to site VPN on Windows Server
please refer the following KB:
Deploying VPN Site-to-Site Access
http://technet.microsoft.com/zh-cn/library/ff687658(v=ws.10).aspx
More about how to deploy the RRAS on TMG please post in the TMG forum:
Forefront support forum
http://social.technet.microsoft.com/Forums/forefront/en-us/home?category=forefront
More information:
TMG Configuring site-to-site VPN access
http://technet.microsoft.com/en-us/library/bb838949.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
well my old iphone broke ish so when i conected it to itunes everyphoto i had when on my computer as a folder so when i got my new iphone i sync it to the computer but now every time i take a photo it goes into two seperate folders on my old folder a
-
Hi, can anyone please tell me how I can receive downloads onto my ipad that i have purchased with a new apple id via itunes on my pc? I added a new apple id and signed out of existing one on my ipad and now receive a message saying that i cannot asso
-
I have a Mac Book Pro and when I travel and check into hotels I can see their wirless networks but can get on the Internet. I ask the front desk for help and all they can do from me is give me a login and password, but I can never find a login page.
-
More and more security companies advise us to switch to Apple. They claim that it's more secure which is a contradiction itself. Why should security companies want me to be secure? So you can conclude that Macs could have several big security issues
-
Levels sent back to Premiere from Audition higher / clipping
I am editing a multitrack sequence in Premiere CC and sending it to Audition CC for audio cleanup. I need to run an Match Volume to get the audio up and it works fine. The metering shows average around -8,-6 db and peaks no more than -3 db. However,