Remote app on my ipad only show iTunes interface...

I was having problems getting me iPad Remote app to work with my Apple TV 1. So I deleted then re-added it to my iPad.
It did find my Apple TV 1 and sync, but now it only shows an itunes interface and there seems to be no way to use it
as a remote? Any suggestions?
Thanks

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Similar Messages

Ipad only shows itunes logo and usb connecter...

my ipad 2 quit in the middle of an app ( I was watching a tv show) and went to the black screen with the white apple logo. I rebooted it and it will only show the itunes logo in the middle of the black screen with a usb cord below it. I cannot get it to respond to anything, i have connecting it to the pc to itunes and done the update and tried to recover the software but it cannot...

Hey RStarks04,
Sounds like this is the image you're seeing?
If so, you'll want to perform a recovery-mode restore. You can read more about it here:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Best,
Delgadoh

My ipad only shows itunes icon at center of screen?

hi can anyone help me.

The iTunes icon with the USB cable? If so, you have to restore the iOS software using iTunes on your computer.
Read this for the instructions.
http://support.apple.com/kb/ht1414

HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

You can't, you will need to get a new remote.

The Remote App on my Ipad does not connect to Itunes on my Desktop

I cannot get the Remote App on my Ipad to connect with Itunes on my desktop. The Ipad tells me to turn on Home Sharing in Itunes on my computer but home sharing is already turned on on my computer. Also, my Ipad does not show up on my Desktop.

Hi Chris,
The article linked below details a number of troubleshooting steps that can help get the Remote app to successfully connect to your Apple TV.
Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
https://support.apple.com/en-us/HT201397
Sincerely,
Allen

My iPad has 21 apps but my iphone4s only shows 13 - why?

I was trying to get apps from my iPad to my new iPhone and the apps store purchase section only shows 13 instead of the 21 that are on my iPad. Does someone know why, or rather how do I get all 21 available to download. Tks.

When you plug in your iPhone to iTunes, click on your iPhone in the list that runs down the left side and then in the large main view box on the right, click the "Apps" tab on your iPhone. Check all the apps on the list that are available to you that you would like to load. There are going to be seperate lists as you scroll down. Some of your apps may be iPad only, but going through the list, if you see they arent iPad exclusive, you can check them, then hit the "sync" button in the bottom right corner and it will load the remaining apps.

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

IPad only shows 11 pages of Apps!! Help!!

I have over 350 apps (half of those from iphone/ipod touch). After successfully syncing them, my iPad only shows 11 pages of apps. There is supposed to be 17. Is anyone else experiencing this with such a capacity of apps

"You can create up to 11 screens." Page 11 of the iPad User Guide
If you have a lot of applications, you can use Spotlight Search to locate and open them.

Homesharing + Apple Remote App on 2 iPads = different display

Hi everybody,
I have the following setup installed at home: An Apple TV 2 + Two iPads. My wife and I are using the devices together, so each of us has their own Apple ID / account ("MyAccount", "WifeAccount") which we are using for our iPads. However, I have entered the same account for homesharing on all devices, so it looks like this:
Apple TV 2: iTunes = MyAccount, iTunes Match = MyAccount, Homesharing (HS) = MyAccount
First iPad (me): Overall: MyAccount, HS = MyAccount
Second iPad (wife): Overall: WifeAccount, HS = MyAccount
We are using the Apple Remote iPad App on both iPads to control the Apple TV 2. However, we have the following issue:
When I use the Remote App on my iPad, I can directly access the music files which are in the iCloud through iTunes Match. "Directly" means I don't need to turn on my TV, i.e. I can see, browse through and select all music files directly on the iPad and they will start playing on the Apple TV.
So I am not streaming from the iPad to the ATV2 (i.e. no Airplay); the iTunes Match songs play directly on the ATV2 as if I were selecting them via TV. So far, so good...
Now, when my wife starts the Remote App on her iPad, she can see and select the ATV2 and she can control it via TV (with swiping and clicking), however, she doesn't see any of the music files on her iPad. This means that she always has to turn on the TV and click through all the options to select music (because that way she can see the files in the cloud), but she can't select them directly on her iPad.
I understand that she doesn't have my iTunes Match account activated on her iPad, however, from my perspective this should not be required., since the ATV2 is logged in to the iTunes Match account and thus we both can select the music via the TV interface - but only I can see and select the files via iPad.
Does anyone experience the same problem and/or has a solution for this so that my wife can select the songs on her iPad as well?
Thanks a lot!
Hobbes

Hi Winston,
Thank you for your answer! I agree that this seems to be a logical explanation, but then it is a strange way of implementation. After all, anyone can access all my music by going through the TV interface with the physical silver Apple remote, regardless if any computers, iPads or iPhones are turned on. So the ATV2 has access to all the music files and also lists them all, however, in the App only I can see them - my wife has to use the TV & remote.
Further, home sharing should enable all my family members to listen to all "my" music. My MacBook Pro provides music via the "physical" iTunes library, my ATV1 provides music via the physical iTunes library (stored on the HDD), my ATV2 provides music via access to iTunes Match.
So now I can access & see all files directly: MBP, MBP via ATV2, ATV1 and of course ATV2.
My wife on the other hand can only access MBP, MBP via ATV2, ATV1 but not ATV2 unless she turns on the TV.
So maybe Apple followed the logic you described when designing home sharing & the remote app, but then they moved from a great implementation on the ATV1 to a "user unfriendly" solution on the ATV2...
Oh, well, looks like I'll be keeping my ATV1 longer than I had expected ;-)

Why does my iTunes only show iTunes U and podcast options

Why does my iTunes only show iTunes U and podcast options at the bottom. I just want to be able to watch movies on my iPad :(
Plus when I go to the videos app and tap go to iTunes Store I get a blue message that says "cannot connect to iTunes Store".
Help please, very frustrated as I'm not at all tech savvy

Check what you can buy in your country:
http://support.apple.com/kb/ts3599

After change HDD for my MAC, How to transfer music, video and app from my IPAD to new iTunes

after change Hard disk for my MAC, How to transfer music, video and app from my IPAD to new iTunes,

you can only transfer music and video you bought on the ipad
this is don by choosing it in the menu called transfer purchases to itunes or something like that
apps can only be bought once you in itunes you can always choose purchases and show apps not on this ipad and get it back that way

Remote App on IPod Touch Connect to ITunes on Win7

Is anyone having a problem making the Remote APP on ipod touch connect to ITunes on Win7 over WiFi? Itunes sees it alright, asks for a Passcode which the ipod supplies, considers it and then says it is invalid. I'm open to suggestions.

Yes it is, I click on the "Remote" button, type the passcode into iTunes, it thinks for a while then comes back and says "invalid passcode". The two are communicating or iTunes wouldn't show the "Remote" button or display the passcode entry window.

How do I reset old 4.1.2 IPAD that shows Itunes and USB plug

How do I rest old 4.1 os IPad that shows itunes logo and usb plug

Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?

Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back?

TS1741 I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Remote app on my ipad only show iTunes interface...

Similar Messages

Maybe you are looking for