Remote function call (RFC) for WS_DELIVERY_UPDATE fails w/o error message

Dear Experts,
Iu2019m using WS_DELIVERY_UPDATE to post goods issue against outgoing delivery. SE37 works fine.
RFC call from external program with the same parameters fails without returning any message.
It aborts during call and after that it becomes invalid.
Also calling BAPI_TRANSACTION_COMMIT does not help.
Any idea why SE37 works fine but RFC fails?
Anything I am missing?
Many thanks
Regards
JW

There could be many reasons, I'd suggest to get your Basis admin involved. Take a look at the ABAP dump (ST22), update termination (SM13) or RFC errors (SM58). Although I doubt you'll find something inside SAP, since it seems that RFC call itself fails.
This function is not a BAPI, so BAPI_TRANSACTION_COMMIT won't do any good. All it does is COMMIT WORK actually.

Similar Messages

CATCHABLE EXCEPTIONS in the remote function call (RFC)

Please tell me what are the CATCHABLE EXCEPTIONS in the remote function call (RFC) and to which exception class do they belong????
Thanks in advance.
Dinesh Dhiman

HI,
With external function calls, the EXCEPTIONS addition of the CALL FUNCTION command can be used to assign return values to the exceptions defined in the interface of the called function module. Class-based exceptions cannot be propagated to the caller from a remotely-called function module, and have the effect of an exception that cannot be handled.
As well as the exceptions defined in the interface of the called function module, an external function call can also have the following predefined exceptions:
The SYSTEM_FAILURE exception is the response to a runtime error that occurs when the remotely-called function module is executed.
The COMMUNICATION_FAILURE exception occurs when the connection to the partner system cannot be established or if the connection is lost during communication.
Note
We strongly recommend that you assign a return value to both these exceptions for every RFC, and that you handle this return value, as otherwise a runtime error will occur in the exception situations in question.
Regards,
Sesh

Remote Function Call (RFC) within a BAdI in ECC to CRM

I've a remote enabled FM in a CRM system which I want to call within a BAdI implementation of a ECC system. As a result, the CRM system is the RFC server and the ECC system is the RFC client.
The FM in CRM simply gets the relevant rows of a Z table which, of course, only exists in CRM and passes these rows to the calling program as per parameter supplied by the calling program.
Now the BAdI in ECC is for changing 'Contracts' data in SAP (transactional data) before posting the contracts in the ECC database. The business uses a transaction where a large number of contracts are processed and documents posted in the system - and when this happens the system runs through (calls) the BAdI one contract at a time.
If I call the RFC enabled FM anywhere within this BAdI, it gets the data for one contract only so it reduces a great deal of performance in regards to memory consumption, network load etc. So I want to avoid this and call the RFC FM once instead, if possible.
Is it possible to call this RFC FM once only (to load the CRM Z table data for all contracts) and store it in a global table/area within the instantiated BAdI class (visibility public) so that when the BAdI is called the second time onwards it can read the global table/area by READ TABLE WITH KEY statement and avoid the RFC call for each BAdI call?
I was also thinking about may be using ABAP Shared Memory if this is a possibility in order to avoid the repeated RFC call? But this table on the RFC server changes frequently....so it might not be a good idea? or....??
I would greatly appreciate your inputs and thoughts regarding this; it would be great to hear if someone had had a similar experience.
Cheers,
Sougata.

As the Z table is only updated via a particular program in CRM - we developed and called a RFC enabled FM in that report when its updating the Z table to update the Z table in ECC to keep it in sync.
Short term benefit but might be long term pain if the Z table in CRM is updated by another program/process/application in the future! Not to mention any table field changes in CRM has to be also made in ECC everytime which is again a pain.
This is a workaround and definitely not a full-proof solution - but I guess these days one has to shut up and deliver whatever the customer wants!

An error occurred when executing a REMOTE FUNCTION CALL.

Dear all,
We have two syetms called DXD and GRD , we have a remote enabled function module in the DXD system , when i am trying to call this Function module from
GRD system it is going for the short dump, and giving the follwing error,
Error analysis
 An error occurred when executing a REMOTE FUNCTION CALL.
 It was logged under the name "RFC_NO_AUTHORITY"
 on the called page.
But i do have the access for the DXD system also, i am really struggling to solve this problem, if any lights are there to help me , i will be thank full for then,
some body suggested for me that we need to maintain the Trusted system tables in the target system.
Thanks & regards
Satya.

first u( user id ) have to get the Authorizations to use RFC ?
object will be like S_RFC or some thing like this.
when u get this kind of error just call /NSU53 then u will come to know which Authorization Object is missing from ur User Profile.
Regards
Prabhu

Data error (invalid data type 17) in a Remote Function Call

Hi,
I am passing 2 select-option tables to RFC.
Tables have structures -
   Table1 SIGN(C1)
               OPTION(C2)
               HIGH(C6)
               LOW(C6)
   Table2 SIGN(C1)
               OPTION(C2)
               HIGH(C20)
               LOW(C20)
At the destination side, I have created two table types which have same structure.
But when I call the RFC , program terminates with error - "Data error (invalid data type 17) in a Remote Function Call"
Not able to understand the reason for this error. Please help.
Thanks,
Sujeet

Hi,
check out this example
[LINK|http://abap.googlar.eu/viewtopic.php?f=5&t=28]
You have several ranges that you can use like RANGE_AUF.
Function example:
FUNCTION zexemple.
*"*"Interface local:
*" IMPORTING
*"     REFERENCE(R_HORA) TYPE FLAG
*"     REFERENCE(R_DIA_1) TYPE FLAG
*"     REFERENCE(P_IDOC) TYPE FLAG
*" EXPORTING
*"     REFERENCE(MSG) TYPE CHAR255
*" TABLES
*"      T_OIFSPBL STRUCTURE OIFSPBL
*"      SL_PBLNR STRUCTURE RANGE_PBLNR
*"      SL_MATNR STRUCTURE RANGE_MATNR
*"      SL_HORA STRUCTURE RANGE_UZEIT
*"      T_ERROS STRUCTURE ZARSTRING
ENDFUNCTION.
Report:
SELECT-OPTIONS: sl_pblnr FOR oirbpblb-pblnr,
                              sl_matnr FOR a361-matnr.
~
Final question:
You are passing the values using TABLES and not IMPORTING right?

Remote Function Call

Hi,
I am very much new to RFC, Can anyone help me to suggest some ideas for the following scenario.
1. For the created PA30 screen using webdynpro, i have to create RFC.
2. BAsed on the input from the system and the screen i have to write RFC.
3. Through the RFC i have to update the Tables.
Thanks ,
Vijay
Moderator message : Spec dumping is not allowed, search for available information. Thread locked.
Edited by: Vinod Kumar on Aug 9, 2011 10:28 AM

Hi..,
CALL FUNCTION - RFC
Syntax Forms
Synchroner RFC
1. CALL FUNCTION func DESTINATION dest
 parameter_list.
Asynchroner RFC
2. CALL FUNCTION func STARTING NEW TASK task
 [DESTINATION {dest|{IN GROUP {group|DEFAULT}}}]
 parameter_list
 [{PERFORMING subr}|{CALLING meth} ON END OF TASK].
Transaktionaler RFC
3. CALL FUNCTION func IN BACKGROUND TASK
 [DESTINATION dest]
 parameter_list
 [AS SEPARATE UNIT].
The destination contains the connection parameters for remote function calls. It contains the connection type, the target system and the partner program. Connections that affect SAP systems exclusively can be agreed as trustedsystems. RFC destinations are managed using transaction code SM59. 
regards,
sai ramesh

Automatic remote login at remote function call

Hello,
we have three systems, development, testing and productiv. I want to do a remote function call on the repective other system. But I always get a login window where you have to insert your password for that system. Is there a possibility to do this automatically? Thanks.
Cheers, Lars.

or else in SM59 double click on your destination server and in logon/security tab and give ur username and password and try

Remote-Enabled BAPI/RFC for creating "Request Special Payment (SPSP)"

Is there any Remote-Enabled BAPI/RFC for creating "Request Special Payment (SPSP)" which is one of the Personnel Change Requests under MSS ?
Thanks.

closing to post another question.

FM SSF_CLOSE failing and giving error message while printing a smartform

Hi,
for language spanish the smartform is not getting printed for output type SG11 but for english it is getting printed? What could be the reason? I debugged and found that SSF_CLOSE is failing and giving error message.
Thanks and regards,
AP.

Hi Aparajita,
for changing from one languages to another translations in SE63 is to be done, either search on SCN for using SE63 , or atleast see these wiki help .
Transaction SE63 - Translation Tools for Translators (BC-DOC-TTL) - SAP Library
Transaction SE63 (SAP Library - Translation Tools for Translators (BC-DOC-TTL))

Export release build failed with an error message: complilation failed while excuting : compile-abc

I updated air sdk from 4.0 to 16.0 beta to fix apple app store submitting bug. I can build the project and run it on simulator without any problem. But when I tried to export the ios release build, I got this error message: complilation failed while excuting : compile-abc.
I use commmand line to excute compile-abc.exe with the parameters that adt gives it, but it failed without any error message.
Here is the command line:
compile-abc.exe -mtriple=armv7-apple-ios -filetype=obj -sdk "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/avmglue.abc" -fields "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/air-fields.arm-air.txt" -O3 -abc-file-list=E:\MyApp\bin-debug\AOTBuildOutput8184169967790207636.tmp\ABCFilesList.txt
There's a empty file AOTBuildOutput-0000001821_1821.o left in the command line workaroud path. I opened file AOTBuildOutput-0000001821.abc, but didn't get any clue. How can I trace this problem?

Still having similar issues - seems to be when I embed an image - but works for every release except for release build
Tried your work around but doesnt seem to make a different
[Embed(source = "/../assets/[email protected]")]
protected static const ATLAS_IMAGE:Class;
[Embed(source = "/../assets/[email protected]", mimeType = "application/octet-stream")]
protected static const ATLAS_XML:Class;
[Embed(source = "/../assets/iconMap.png")]
protected static const ATLAS_IMAGE_LOW_RES:Class;
[Embed(source = "/../assets/iconMap.xml", mimeType = "application/octet-stream")]
protected static const ATLAS_XML_LOW_RES:Class;
if(Starling.current.viewPort.width > 320)
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE(), false), XML(new ATLAS_XML()));
}else{
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE_LOW_RES(), false), XML(new ATLAS_XML_LOW_RES()));

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available, what should I do?

My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available (3014), what should I do?

Try -
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
3014
Restoration of code 3014 will not work?: Apple Support Communities

QL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of

Dear all,
please help me4 on this
i am getting this error
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
my logs are:
sapinst.log
ERROR 2011-12-18 09:40:34.550
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2011-12-18 09:40:34.558
MUT-03025 Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
ERROR 2011-12-18 09:40:34.717
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
INFO 2011-12-18 09:57:09.852
An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase".
INFO 2011-12-18 09:57:15.747
Creating file /tmp/sapinst_instdir/.lastInstallationLocation.
INFO 2011-12-18 09:57:16.545
Creating file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/__instana_tmp.xml.
oracle_sql_results.log
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Dec 18 09:40:34 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
SAPINST: End of output of SQL executing program /oracle/PRD/102_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-12-18, 09:40:34 SAPINST ORACLE stop logging
alert_prd.log
Sun Dec 18 09:40:34 2011
Starting ORACLE instance (normal)
Sun Dec 18 09:40:34 2011
WARNING: EINVAL creating segment of size 0x000000d8001b2000
fix shm parameters in /etc/system or equivalent
please sujest the solution very urjent pz........

Dear deepak
itried to start the database manually
but it is not working.
SQL> startup
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
SQL>
and my shm parametrs for the Solaris ACCORDING TO NOTE 724713 are
projadd -p 333 -c "SAP System PRD" \
-U prdadm,oraprd \
-K "process.max-file-descriptor=(basic,65536,deny)" \
-K "process.max-sem-nsems=(priv,2048,deny)" \
-K "project.max-sem-ids=(priv,1024,deny)" \
-K "project.max-shm-ids=(priv,256,deny)" \
-K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
dr
projmod -s \
-K "process.max-file-descriptor=(basic,65536,deny)" \
-K "process.max-sem-nsems=(priv,2048,deny)" \
-K "project.max-sem-ids=(priv,1024,deny)" \
-K "project.max-shm-ids=(priv,256,deny)" \
-K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
user.root
prdadm::::project=dr;oraprd::::project=dr
thanks & Regards
k.Phani Krishna

User exit for ME22N in throwing an error message.

Dear Experts,
I have a requirement here :
PO is created, and see it in ME22N ,we see line items. In a line item when we make changes in PO Quantity or value and save it, then Select the line item and Go to -> Environment-> Item changes. It takes to a screen where a new doc no is generated. Whenever we make changes in PO Quantity or value and save and navigate through Go to -> Environment-> Item changes, it generates a doc number.Similarly,it can generate any no.of doc nos for the changes we make.For each change in line item ( in PO Quantity or Value ) it generates each doc number.
My requirement is to restrict the user not to generate more than 3 doc numbers.After 3 doc numbers are generated and user tries to change line item PO or value for another doc no, an error message has to be thrown to stop the user.
Please guide me in this requirement.
Thanks in advance.
Anticipating your early reply.
Thanks,
ranisin

Hi,
Use change pointers
Function Modules :
1) CHANGE_POINTERS_CREATE
2) CHANGE_POINTERS_READ
3) CHANGE_POINTERS_STATUS_WRITE
4) CHANGE_POINTERS_READ_MODE_SET
5) CHANGE_POINTERS_READ_INFO_GET
Tables :
1) BDCP - Change pointer
2) BDCPS - Change pointer: Status
3) BDCP2 - Aggregated Change Pointers (BDCP, BDCPS)
4) CDPOS - Change document items
5) CDHDR - Change document header
Tcodes :
1) BD61 u2013 Activate change pointers.
2) BD50 u2013 Activate change pointer s for message types.
Hope this helps you.
Thanks and Regards,
Ranjith Nambiar

TS1292 I bought a 4 pack of $25 Itunes gift cards and only 2 will activate. For the second two it just keeps asking for my login. No error message just keeps repeating the login

I bought a 4 pack of $25 Itunes gift cards and only 2 will activate. For the second two it just keeps asking for my login. No error message just keeps repeating the login. Is there any way to fix this or did I just lose $50

Report this here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Remote function call (RFC) for WS_DELIVERY_UPDATE fails w/o error message

Similar Messages

Maybe you are looking for