Remote issues

I am attempting to pair my iPhone's Remote App with the iTunes Library on my computer. Both have Home Sharing on and enabled, yet my iPhone Remote App doesn't detect it as a possible controle-able library. Likewise when I use the "Add Library" button in the setting menu, the 4 number it gives me are useless as my iPhone doesn't show up in the "Devices" tab the prompt directs me to. At no point does the iTunes Library on my Mac recognize that my iPhone is trying to pair with it. They are using the same shared network, they are both fully up to date, both iTunes, iOS, and the Remote app. There is a "Forget all Remotes" button in the Device settings, but the opposite function eludes me. I'm feeling pretty nube at this point, but I just can't find any other options or settings anywhere that would make this connection happen.'
Help?

When you setup the Apple remote did you use the same apple id to set up homesharing as you did on your computer?

Similar Messages

TV@nywhere Plus remote issue resolved!!!

I have been searching and reading many posts to fix my remote issue / not working problem. I have had a MSI TV@nywhere Plus TV tuner for like a year and the remote never worked. I don't know the exact model number of the tuner card. I know my driver for the TVR is 2.0.2.2. I have the software that has the PVR Plus. I had seen several posts that link the issue to running the Initervideo Cinema Manager which I ran and I still did have any luck. So I uninstalled Intervideo WinDVD (which I did and this did not resolve the issue either) I left this program uninstalled an I searched the CD for some info.
The CD I have has a version number on the bottom around the hole MSI_7131_V1.1.
I found a program called P3XRCtl.exe that has a icon of a remote in the path E:\PCI\TVUtility (this is on the CD). I copied this program to my desktop and then clicked on the icon. Guess what, it worked!!! All of the functions on the remote work. It seems as if when I installed the software that this remote software/utility did not get installed and does not run when the TVR program starts. So I then created a folder in my program files to place this exe file. The path I placed it is C:\Program Files\MSI\TV@Anywhere Utilities (I created the TV@Anywhere Utilities folder) The MSI folder now has 2 folders called TV@Anywhere Plus & TV@Anywhere Utilities. I still had a problem of the program not starting when I start the TVR program so I added the exe file to the Startup folder. To do this create a shortcut to the exe file and place this new shortcut in C:\Documents and Settings\All Users\Start Menu\Programs\Startup
This program will now start everytime the computer starts and the remote should work when the TVR program is started. I am running Win XP Pro...

This is wonderful I just solve my problem with the Remote Control, I Follow the suggestions from this people and my problem is fixed... now I can use it. Thank You very much

DVR/STB/Remote issues - Help Needed

New to Verizon FIOS (Installed about 2 weeks ago). Have a few issues. Any help is appreciated
1) When im on the Home Media DVR and i fast forward through a program, when i stop or hit play, an extremely loud beep that lasts for 1-3 seconds comes from the speakers. How do i get this to stop, what is causing it, etc?
2) When i fast forward from one of the STB (regular HD box), if i hit FF once, it fast forwards pretty slow, if i hit it again, it goes somewhat faster. The problem is. When i hit it that 2nd time, it seems that 70-80% of the time, it jumps me back to an early portion of the program. I.E. Was watching the 2 hour episode of "24", was one hour and 20 min in, got to commercials, i hit FF twice and it jumped me back to 23 minutes in. Tried again at next commercial break and it jumped me back to 11 minutes in. What is the deal here? How do i fix it?
3) Are there only 2 fast forward speeds on STB? I came from Brighthouse that had 4 speeds, im a little disappointed with only 2 speeds. Can anyone verify?
4) The remotes seem to take 2 seconds or so to register when performing any function other than changing channels. When i hit FF or REW, DVR or Last, it seems to take a few seconds to kick in. Is this a known issue, or possibly my box or remotes?
Thanks for any and all help

Sorry the ff speeds are the same. On the main MR-DVR there are 3 ff speeds, where the remote STB has 2 ff speeds. I think they did that because how the remote system works, it has slower responses being remote. But with the update you will not need to worry about the ff, because you will not get the hub error. I was one of the first people to get the update and I have not seen the hub error yet.
As far as a time frame I don't believe there is any thing public about it, I think the only thing they have said is it is going to be rolled out per market, and one market a week. But nothing on the order of the markets.

Logic Remote issues after updating to iOS 8, problem solved!

Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

Note: Removing the CS (Controller Surface) plist is a part of the basic troubleshooting procedures for Logic Pro (and GB)
See section #8
Logic Pro X: Troubleshooting basics

Tv remote issues

the remotes suddenly stops working, no power, nothing. new batteries are not helping. this is the second one to have this problem and customer service is of little help except to say get a new one. can anyone help?

One way of checking to see if the infrared component of the remote is working at all is to point it at a camcorder or digital camera or cell phone camera and see if a bright light appears when you press the button. If so, you know that the remote is at least outputting data. Now then the issue is to determine if the remote is programmed properly and outputting the proper code sequence. No chance the receive window in theSTB is blocked, dirty, or behind a glass door in an entertainment center, is there?
I've also had remotes whih went stupid periodically is the batter contacts are loose, dirty, or worn. One of my old remotes would have to be reporgrammed each time the batteries were changed.

[TV@Plus] remote issue

I cannot seem to get the remote working. I messed with the connection several times so this is not the issue.

BLOG entry #7
On this day(see above for actual date) I recieved a new remote and receiver from MSI. I installed the batteries in the remote and installed the new receiver. The new remote did not work! I turned off my PC and painted the guest room(behr arabian sands semi gloss). Ate lunch at 2:30 and painted the trim in the guest room(Gliden pure white semi gloss). Ate dinner at 7:00 and turned on the PC. The remote still did not work.
For some reason I did a search for P3XRCtl.exe and found not one but two. In "E:\Program Files\MSI\TV@Anywhere Utilities" was 1.2.1.0 and in "E:\programs\PCI\TVUtility" was 2.0.0.0 also the start menu and startup both pointed to 1.2.1.0 so i did a simple copy of folder "E:\Program Files\MSI\TV@Anywhere Utilities" then deleted the contents of the original folder. I then did a cut of the contents in folder "E:\programs\PCI\TVUtility" and pasted them into the original "E:\Program Files\MSI\TV@Anywhere Utilities" . Success!! The remote now works and I can devote my time to exploring the other function of my TV@nywhere Plus and of course painting other roomss in my house
Did I do something wrong? or did the upgrade not install itself correctly?
One other thing. should I send back the new remote and receiver or would it be a waste of thier time and return postage?
Up next ... capture from VHS so be prepared to answer more questions

A little off topic - remote issues

Anyone else having this issue. I have an universal aeros mx850 and for some reason it controls the apple tv great through direct IR - but when i go to RF to the IR repeater it doesn't work. Any thoughts on this? Really strange. Never had an issue like this before where the remote worked the device perfectly through direct IR but when you move to RF no go.
Thanks

it could be the IR driver... I assume that you learned it into the remote itself. most all IR devices follow the NEC standard set years ago, that allow an IR header and then a repeat command. Apple must deviate from this slightly, because they also encode a remote ID somewhere in the header, to allow devices to be "paired" but also all share a common generic header that is not remote specific. you could try to go to www.remotecentral.com and search the files section for you appropriate remote driver for an Apple remote. this particular driver might have been learned differently than yours and may work where yours did not. also you could try to go back and relearn the commands. there are all types of tricks to groom or filter the IR for different effects.... you can tap the button instead of holding it down... place a sheet of notebook paper in between the remote and the learning remote, shoot it at an angle... etc... if remotecentral does not have an alternate driver there, i'm sure it must be in the section for Pronto remotes, and there are utilities to convert the file over to MX style files. perhaps the odd structure of the header + ID is confusing the RF bridges (which are known to have so so performance in certain situations.
the other possibility is that the carrier frequency is non-standard. off the top of my head, i think that his frequency is in the 38 or 39kHz... but some manufacturers are known to deviate slightly off this. the original remote works fine, but if it is not within the spec of the RF repeater or Xantech style repeater, then the signal does not pass correctly.
for the Xantech solution, i'll try to research what carrier freq the Apple remoe uses. Xantech does have specific solutions for certain carrier frequencies... such as old Pioneer Elite and, B&O, and Bose equipment... maybe something custom is required for Apple.

Apple Tv Remote Issues

I just bought a new Apple Tv and seem to have some issues. The **** remote that came with the Apple Tv is making my iMac play music and much more. Is there a way around this? Does iTunes have to be open and my iMac on for my Apple TV to work?

Go to the Apple Menu and choose System Preferences. Click on Security. Under the General tab check 'Disable remote control infrared receiver'.
Launch iTunes and under the Advance menu and select 'Turn On Home Sharing'. You'll need an iTunes (Apple ID) account to turn it on.

Ipod mini with Bose Sounddock/remote issues

Just purchased mini & sounddock, but for remote to work, software version must be 2.2 or later; my mini will only update to 1.4.1. Can this be remedied, or do I kiss the remote feature goodbye?

The latest version of iPod mini is 1.4.1, (2.2 - is related to iPod dock connector i.e. iPod 3Generation).
Please have a read the following
http://www.apple.com/ipod/download/
Your iPod mini should be able to control by using the Bose soundock's remote control as I do.

Two FIOS boxes in the same room, remote issues

I have two cable boxes in my living room to enjoy the football season. my only problem is that all fios boxes have the saem remote settings.
Does any one know a way to get the two boxes working separately for under 100 bucks?

I really doubt that the original poster is monitoring this discussion any more, so I will answer your question. Yes you can have as many boxes as there are inputs on the TV. Each box can output in most of the input formats of any TV. Rf output is not available on some units. For example, my rec room TV has 2 HDMI, 1 component, and 3 composite video inputs. I could have 6 boxes attached, at least. One more, if I had a cable box with an RF output.
Now my question: Why would you do that?
I once used two DVRs on one TV because I wanted to record more than 2 channels at once and have them available to that TV. If all you want is a way to swap channels quickly, buy a remote with programmable macro buttons and program them to the channels you will be watching. you can buy such a remote for under $20. Or if you only need two channels, just use the Back button with one STB to toggle back and forth.

CF9.0.1 and Flex4 Remoting Issue

We are trying to migrate our flex apps from CF8.0.1 to CF9.0.1 and we are getting an error that seems to be caused when trying to create a VO which is typed to a CFC that is in a directory below the webroot. This was working in CF8.0.1.
The UserVO.as has the following RemoteClass Attribute:
[RemoteClass(alias="flex.coms.CF9Testing.UserVO"")]
public class UserVO
This maps to a CFC with the following attributes:
<cfcomponent access="remote" output="false" alias="flex.coms.CF9Testing.UserVO">
The properties all bind correctly and the path is correct, but as soon as we try to pass an object from Flex to CFC we get the following error in the logs.
[BlazeDS]Cannot create class of type flex.coms.CF9Testing.UserVO'.
flex.messaging.MessageException: Cannot create class of type 'flex.coms.CF9Testing.UserVO'. Type 'flex.coms.CF9Testing.UserVO' not found.
If we remove the mappings and put a copy of the VO in the webroot, it works fine.
Can any one shed any light on what we are doing wrong?
Thanks,
Mark

Hi Paul,
We turned on mappings in the services-config.xml.
Cheers,
Mark

Remote issues, help requir

Well, I have an Audigy 4 (OEM), that doesn't come with the remote.
Well, some ebaying got me the remote (rm-500) and the receiver, but not the drivers disc (I still have the original drivers disc for my Audigy 4 though). I can't get the remote to work, I don't have remote center installed despite having done a full installation.
Is there something I've missed? Can someone help me please?
The remote signals btw.

got it working. is there a plug-in for jetaudio and remote?
It's almost funny how I could change volume in jetaudio, switch tracks, close the program, all with the remote, yet I can't PAUSE the music!Message Edited by alexdark on 08-28-2006 05:43 PM

Msi tv@nywhere remote issue

When I first installed the card it worked perfectly and I was happy. Later I rebuilt ("upgraded") the machine that runs my TV got the tunner working again with the updated drivers from the msi website. but the remote is non-functional. I've tried new batteries, but am kinda stumped on what else to try. any suggestions? ?( Is there anything that I could have done wrong to hurt the remote or reciever? ?( Could it just be that one of my new componets failed? ?(
Thank you for your help?

This is wonderful I just solve my problem with the Remote Control, I Follow the suggestions from this people and my problem is fixed... now I can use it. Thank You very much

ColdFusion Remoting Issue

I'm trying to use the following code in a CFFORM.flash. The
remoting call returns nothing. When I mess up the name of the cfc I
do get a flash error so I'm assuming that the call is getting in
but is not able to return. I have another function in the same
component, set up the same way, that returns the data just fine.
Can anyone see where this code is wrong? Thanks.
cfsavecontent variable="GetData">
//create connection. Should be installed by default with
CFMX7 with correct path
var connection:mx.remoting.Connection =
mx.remoting.NetServices.createGatewayConnection("
http://#cgi.HTTP_HOST#/flashservices/gateway/");
//declare service
var myService:mx.remoting.NetServiceProxy;
//put the controls in scope to avoid calling _root
var testtext = testtext;
//make an object that will handle the response
var responseHandler = {};
//function that receives the response
responseHandler.onResult = function( results: Object ):Void
//when results are back, we show the text received
testtext.text = results;
//function that receives any error that may have occurred
during the call
responseHandler.onStatus = function( stat: Object ):Void {
//if there is any error, show an alert
alert("Error while calling cfc:" + stat.description);
//get service. First parameter is path to component and
//the second it's the object that will handle the response
myService =
connection.getService("empbldrv.CFC.flashResponder",
responseHandler );
//make call
myService.GetData();
</cfsavecontent>
Here's the cfc:
<cffunction name="GetData" output="true" access="remote"
returntype="string">
<cfset q_getData='true'>
<cfreturn q_GetData>
</cffunction>
Here's the form:
<cfform name="test" format="flash" method="post"
enctype="application/x-www-form-urlencoded">
<cfinput type="button" name="button" value="Click Here!"
onclick="#GetData#">
<cfinput type="text" name="testtext" width="150">
</cfform>

I am not sure if this helps but don't you need a cfcomponent
tag in your
cfc?
<cfcomponent name="flashRemotingResponder" access="public"
description="Responds to Flash remoting requests">
"Mark Forsberg" <[email protected]> wrote in
message
news:[email protected]...
> I'm trying to use the following code in a CFFORM.flash.
The remoting call
> returns nothing. When I mess up the name of the cfc I do
get a flash error
> so
> I'm assuming that the call is getting in but is not able
to return. I have
> another function in the same component, set up the same
way, that returns
> the
> data just fine. Can anyone see where this code is wrong?
Thanks.
>
> cfsavecontent variable="GetData">
> //create connection. Should be installed by default with
CFMX7 with
> correct path
> var connection:mx.remoting.Connection =
> mx.remoting.NetServices.createGatewayConnection("
http://#cgi.HTTP_HOST#/flashser
> vices/gateway/");
> //declare service
> var myService:mx.remoting.NetServiceProxy;
>
> //put the controls in scope to avoid calling _root
> var testtext = testtext;
>
> //make an object that will handle the response
> var responseHandler = {};
>
> //function that receives the response
> responseHandler.onResult = function( results: Object
):Void {
> //when results are back, we show the text received
> testtext.text = results;
> }
>
> //function that receives any error that may have
occurred during the call
> responseHandler.onStatus = function( stat: Object ):Void
> //if there is any error, show an alert
> alert("Error while calling cfc:" + stat.description);
> }
>
> //get service. First parameter is path to component and
> //the second it's the object that will handle the
response
> myService =
connection.getService("empbldrv.CFC.flashResponder",
> responseHandler );
> //make call
> myService.GetData();
> </cfsavecontent>
>
>
> Here's the cfc:
>
> <cffunction name="GetData" output="true"
access="remote"
> returntype="string">
> <cfset q_getData='true'>
> <cfreturn q_GetData>
> </cffunction>
>
> Here's the form:
>
> <cfform name="test" format="flash" method="post"
> enctype="application/x-www-form-urlencoded">
> <cfinput type="button" name="button" value="Click
Here!"
> onclick="#GetData#">
> <cfinput type="text" name="testtext" width="150">
> </cfform>
>
>

Remote issues with 2nd gen Apple TV. (locking up)

When using 2nd gen Apple TV with provided remote, I can only scroll through items or use on-screen keyboard for a few moments at a time, and then the remote seems to lock up. After a few seconds, I can move around again, but the cycle continues.
I can type a few words with on-screen keyboard or scroll through a handful of items at a time before the remote seems to lock up and not allow me to move around.

Try holding down menu and the left arrow for 6 seconds
http://support.apple.com/kb/HT3176?viewlocale=en_US&locale=en_US

Remote issues

Similar Messages

Maybe you are looking for