Remote triggering for synchronization

I want to use LabVIEW 8.2 to automate a series of tests. Also involved in the test is a Thermotron temperature chamber. I want to start the sequence of tests upon receiving a signal from the temperature chamber so that the tests and the already-implemented thermotron programming will be synchronized. How can I do this? I want to use an event structure, but LabVIEW will not generate an event based on the level change of an external signal, only user interaction with the front panel. If I can't use an event structure, what's the best way to do what I want? Thanks in advance.

There are many ways to do that, and I don’t know what kind of hardware you use for your tests. But regardless of the hardware, you can do that by software. If you really want to use the event structure, have a separate thread that polls for the start signal. In your event structure, create a user event and register for that event (see the LabVIEW example Programmatically Fire Events.vi and also Dynamically Register for Events.vi). Your separate thread that polls for the start signal should generate the appropriate event to start your test sequence.
Note that you don't want to use registered events, you can also simply poll for your start signal in the timeout case of you event structure. In that case, simply wire a timeout constant to the timeout connector of your event structure and manage states in your application.
Hope that helps.
Patrick.

Similar Messages

How do I enable infrared remote triggering on my Canon Rebel T5

My awesome wife bought me a complete starter kit with a Canon Rebel T5 (not a T5i) for my birthday... I'm so stoked! In the starter kit was an infrared remote that looks like this.
It says I just need to set my camera to accept remote triggering in order to use this remote. But I cannot for the life of me find it! I tried searching google but any time I type anything remotely (no pun intended) related to Canon Rebel, I get pages and pages of places to buy one and not much information at all on how to use one.
Thanks for your time!
Solved!
Go to Solution.

Yup, no IR. Sorry
http://forums.usa.canon.com/t5/EOS-Rebel/what-are-major-differences-between-the-T5-and-the-T5i/m-p/1...

Missing privilege:NO TRIGGERS FOR REPLICATION USER

Hello,
I'm configuring the Synchronization Manager following the steps on the SAP MaxDB Library 7.6. I've done every step until the activation of the Replication Units, where the Synchronization Manager GUI give me the following error:
+Create MaxDB Trigger
com.sap.dbtech.jdbc.exceptions.DatabaseException: [-5001]: Missing privilege:NO TRIGGERS FOR REPLICATION USER
     at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:65)
     at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:1061)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:689)
     at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:563)
     at com.sap.dbtech.jdbc.StatementSapDB.sendCommand(StatementSapDB.java:855)
     at com.sap.dbtech.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:919)
     at com.sap.dbtech.jdbc.StatementSapDB.execute(StatementSapDB.java:266)
     at com.sap.dbtech.jdbc.StatementSapDB.execute(StatementSapDB.java:234)
     at com.sap.dbtech.jdbc.trace.Statement.execute(Statement.java:79)
     at com.sap.sdb.syncMan.util.SQLBuilder.markMaxDBTableForRep(SQLBuilder.java:301)
     at com.sap.sdb.syncMan.design.DesignSQLLayer.installTableOfParticipant(DesignSQLLayer.java:2427)
     at com.sap.sdb.syncMan.design.DesignSQLLayer.installReplicationUnit(DesignSQLLayer.java:1493)
     at com.sap.sdb.syncMan.gui.jface_controls.UnitControl.internalActivateParticipant(UnitControl.java:1165)
     at com.sap.sdb.syncMan.gui.jface_controls.UnitControl.internalActivateSelectedParticipant(UnitControl.java:1067)
     at com.sap.sdb.syncMan.gui.jface_controls.UnitControl.access$000(UnitControl.java:98)
     at com.sap.sdb.syncMan.gui.jface_controls.UnitControl$WorkerThread.run(UnitControl.java:125)+
Question:
1. What privilege should I give to the Synchronization User? It's already a DBA user.
2. Could it be a library problem?. According to the documentation installed with the application, the Mysql connector jdbc should be used instead of the sapdbc.jar; but doing this the Synchronization Manager GUI doesn't start.
Regards!
MY

Hello,
you can create the replication user like this.
"create user dbservice password <your password> dba not exclusive replication"
Did you grant the tables you want to replicate to the replication user?
The replication user itself must not own triggers or tables. It owns special system triggers and repliaction meta tables.
Best Regards
Wolfgang

Ntpdate - no server suitable for synchronization found

Hi,
I am running Solaris 8; ntpdate 3-5.93e.
Running:
ntpdate -u -d server01
19 Jun 11:01:22 ntpdate[24907]: ntpdate 3-5.93e Mon Sep 20 15:45:30 PDT 1999 (1)
transmit(172.25.12.5)
transmit(172.25.12.5)
transmit(172.25.12.5)
transmit(172.25.12.5)
transmit(172.25.12.5)
server 172.25.12.5, port 123
stratum 0, precision 0, leap 00, trust 000
refid [0.0.0.0], delay 0.00000, dispersion 64.00000
transmitted 4, in filter 4
reference time: 00000000.00000000 Wed, Feb 6 2036 22:28:16.000
originate timestamp: 00000000.00000000 Wed, Feb 6 2036 22:28:16.000
transmit timestamp: c84164f5.3870e000 Mon, Jun 19 2006 11:01:25.220
filter delay: 0.00000 0.00000 0.00000 0.00000
0.00000 0.00000 0.00000 0.00000
filter offset: 0.000000 0.000000 0.000000 0.000000
0.000000 0.000000 0.000000 0.000000
delay 0.00000, dispersion 64.00000
offset 0.000000
19 Jun 11:01:26 ntpdate[24907]: no server suitable for synchronization found
Number of Interupted System Call - Err#4 EINTR error messages in truss report. when receiving SIGALRM #14 ( Generated by clock when alarm expires)
Any idea?
Thanks

Thanks Darren,
* The remote machine (server01) isn't running an NTP server
ps -eaf | grep ntp
root 13451 1 0 Jun 16 ? 0:03 /usr/lib/inet/xntpd
I checked and server01 is acting as the ntp server, comunicating and replying to client's requests:
snoop port 123
Using device /dev/bge0 (promiscuous mode)
client01 -> server01 NTP client (Tue Jun 20 08:14:53 2006)
serfver01 -> client01 NTP server (Tue Jun 20 08:14:16 2006)
server01 -> time.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
server01 -> time1.chu.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
client02 -> server01 NTP client (Tue Jun 20 08:16:19 2000)
server01 -> client02 NTP server (Tue Jun 20 08:14:24 2006)
* The remote machine is restricted and will not serve time to you
I am not sure what do you mean by remote machine (cleint or server machine); but they are all on the inside network and I am not aware of any kind restrictions?
* A firewall or other policy is intentionally dropping the packets
This might be true and an issue for server01 talking out to the Internet NTPserver
server01 -> time.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
server01 -> time1.chu.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
As you see **No response from the Internet Servers**;
Running ntpq -p on client01:
ntpq -p server01
remote refid st t when poll reach delay offset disp
======================================================== ntp.mcast.net 0.0.0.0 16 - - 64 0 0.00 0.000 16000.0
time.nrc.ca 0.0.0.0 16 - - 64 0 0.00 0.000 16000.0
time1.chu.nrc.c 0.0.0.0 16 - - 64 0 0.00 0.000 16000.0
Stratum for all of Internet NTP server is 16 which I don't think is good?
Temporary solution to set up server01 to be LOCAL, so that it can advertise itself as a server for ntpdate command, because it appears to act as a server for xntpd on the client side since it talks to clients.
* One or the other machine has a network problem dropping traffic
If you mean hardware problem, I checked log file no traces of loged problems.
Thanks

Enter event not triggering for read-only checkbox

I have some objects in a form that get "locked" when the user signs the form. I'm not using the digital signatures. Instead, when the user types their name into the signature text field, a script runs on the change event that makes all of the fields in the form read only. It also unlocks the fields if the signature is deleted.
I was worried that we would get a lot of phone calls with users that didn't understand that the form had locked ("Why doesn't this form work?!"), so I added some code to the enter event for all of the fields that would pop up a messagebox to explain to people trying to edit a signed form that the form was locked and that they would need to delete the signature to edit the form.
This plan works perfect for my text fields and decimal fields. It does NOT work at all for my checkboxes. For some reason, the enter event is never triggered for read-only checkboxes. I don't see any other events that would obviously work for me though. Any ideas?
Thanks

Thanks, those are reasonable suggestions.
In the first suggestion, I'm unclear about one aspect of how I would accomplish this. I assume I would allow people to modify fields in the form, but that when they did, a msgbox would pop up that would inform them that, if they continued with this modification to a signed form, the signature would be removed. I'm all good to that point. But if they answered that they do not want to continue modifying that field and removing the signature, how can I code it to set the value back to what it was before the change? Is there some method that will give me access to the value of the field BEFORE the attempted modification? I went looking for something like $.previousvalue, but found nothing.
I'd suggest that I could use a two-stage solution, in which I store the previous value on the enter event, and save it just in case they do not want to change the field when prompted by the msgbox, but since the enter event does not exist for checkboxes (my original problem), that seems like it won't work.
As far as radio button suggestion, I like radio buttons very much except for one fatal flaw: they aren't (as far as I can tell) clearable. That is a shame. Clearly some people (like me) want both exclusivity AND clearability. And we'd like the controls to have an enter event. But I know I'm demanding Anyway, as it is, I just end up having to use checkboxes and create a boatload of silly code to make them exclusive.
Emily

Remote app for iPad Wont show songs but iPhone Will

Hi All
I have a Strange problem with airport Express and airtunes
From my iPad 4.2.1 running Remote app for iPad if i search for an artist, like Gary Moore, it shows the artist name, but when i Press the name it doesnt display the songs with this artist, it says no songs found.
But if i use the same app on both my iPhone 4 and my iPod touch, and do the same search and Press the artist name, it shows All the songs that i have with this artist
Both the iPad and the iPhone connects to the same airtunes library, on the same machine with iTunes 10.1?
Does anybody have any ideas of what is wrong
I have tried to reinstall the app on the iPad, but that diednt work, i have tried to delete the library on the iPad with no luck
Aby help would be apreciated
Sincerely
Carsten Larsen
mac mini Mac OS X (10.6.3)

I know this is an old question, but I had the same problem and found the solution somewhere else and thought I'd post it here as this thread comes up when googling for the answer.
It appears as though any songs without an "Album" don't appear. In iTunes select all songs without an album, right click and select "Get Info" and give them an Album name (e.g. "Unknown" or "Singles"). This might also apply to songs without other tags.

Keyboard issue using Danish keyboard on Remote app for iOS.

Hi there.
I have noticed a quite annoying issue with the Remote Desktop for iOS when using foreign keyboards along with the Remote Desktop app.
The PC I'm remoting to from my iPad Air is a Windows 7 machine with an English Windows.
I have a danish keyboard layout installed, and have removed the English keyboard.
But.. Here comes the strange issue.
If I connect via Remote Desktop before I log into my PC (from my PC), the special characters like :;/*^%}{ ect. works just fine on my iPad.
If I then log on to my PC from the PC, the keyboard on the PC has been changed to english, even though there's no english keybord layout installed on my PC.
The special characters like the danish æøå has been changed out with ; and other wrong characters.
I then have to press CTRL+SHIFT on my PC to change it back to the danish layout.
But... If I do so on my PC and afterwards connect via the Remote Desktop app on my iPad Air, the keyboard is messed up on my iPad.
All the special characters like /:;)(^#%{ is placed wrong and give me a wrong character.
And that happens even if I change the keyboard on my iPad to English.
I really hope you will be able to fix this in a future update enabling full support for foreign keyboards between iOS7 and Windows 7.
Thanks in advance.
- Bjørn, Denmark

Hi,
Why are the characters mixed up in the session?
This issue can occur if the keyboard language has been switched on the remote PC while running a remote desktop session. In the case you would like to switch to a different keyboard language
follow these instructions.
Note: The remote PC selects the system language of the device running the remote desktop client and not the keyboard language. When switching the keyboard language on your device, you need
to manually switch the keyboard language on the remote PC.
1. Open settings on your device.
2. Tap General and then tap International.
3. Tap Language and select the language running on the remote PC.
4. Open the RD Client and connect to the remote PC and check if the Windows keyboard language matches the language that you selected.
http://technet.microsoft.com/library/dn473015
Hope this helps.
Jeremy Wu
TechNet Community Support

Eos remote app for iOS

The idea was great, however the development seems to be stopped on this.
It hasn't been updated since Dec of last year.
Will there be a new version of EOS Remote app for iOS?
Features I'd like to see from the upgrade (if there's any)
1) Full size image transfer
2) Video file transfer
3) Indicate if a file is already downloaded to the phone or not.
Thanks,

Hi rmpark!
Thanks for posting.
The EOS Remote App currently works with up to iOS version 7. I am not sure if or when the next version of the app will be released, or what features will be added to it, but I have forwarded your suggestions along. This feedback is very important to Canon. Please continue to check in the app store from time to time for any updated versions that may be released.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Remote restart for a Mac using FileVault 2 encryption?

Does anyone know of a way to perform a remote restart for a Mac using FileVault 2 encryption? I have some remote Macs for which I'd like to enable full disk encryption with FileVault, but would prefer not to make a physical trip to those machines whenever they need a reboot. I strongly suspect the answer to this question is "No", without some form of IP KVM, but I figured I'd double-check. If anyone knows of any reasonably priced Mac-compatible KVMs that would be great too. Thanks.

Does anyone have an answer?

PO Release Strategy not triggerred for particular Total Net Order Value

Dear,
I am currently facing the issue where release strategy for purchase orders is not getting triggered for a particular value or lower.
For order value 1 INR or less, no release strategy is triggered for new created PO. And for value > 1 INR release strategy is getting triggered.
All otehr PO characterstics are the same, I mean to say the values for other characterstics such as plant material group are identical.
But the characterstics for release for Total net order value are <= 30000 INR. There are two system copies, where in one system the same release strategy is working as expected. But in other system the above mentioned issue occurs. There is no differnce which I can see in the release strategy setup.
Please suggest for solution.
Thank you.
Warm Regards.

Dear All,
While looking further into the issue by going into debugging mode, we have found that in include LCLSCF2I, Internal table p_selection_criteria_tab , the value for ATFLV (Internal Floating point from) gets different values in the two systems. For example, in the affected system, for PO with 1INR tottal value, for one of the Total value chaaracterstics before INR characterstic, ATFLV value is 0,0000000000000000E+00, hence it gets out of loop and doesn't trigger release strategy.
But in another system for same PO values and release setup, ATFLV value is 1,0000000000000000E+00 for that characterstic.
May I know how the value for this field gets calculated.
Thank you.
Warm Regards.

Event not getting triggered for PR generated through MRP run

Hi All,
Could anyone let me know how to get a workflow triggered for the ReleaseStepCreated event (obj - bus2105) when the PR is created through MRP run. The MD02 control paramters have the value '1'.
Interstingly the workflow triggers when the value is set to '2' or '3'.
Thanks,
Ameekar

Thanks Aman,
I checked field restrictions but there are none there. Actually i checked them for other object 'AOOMARA' which is being thrown as an exception when i am creating the PR through MRP run.
Exception says -> field not maintained.
So i guess, i need to maintain the field for Change Document but i am not sure how. COuld you please aid me with that.
Thanks A lot !!

A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

Setup for remote app: http://support.apple.com/kb/ht1947
Specifically:
Set up Apple TV (2nd and 3rd generation)
On Apple TV, select Settings from the main menu.
Select General > Remotes > Remote App. If Home Sharing isn't set up on your Apple TV, you should turn it on.
Apple TV (2nd and 3rd generation) uses Home Sharing to stream content from your iTunes library on your computer to your HDTV. If you connect your Apple TV to your iTunes library using Home Sharing, you can use Remote to browse and play content from any iTunes library in the Computers section of your Apple TV. You can also use Remote to select between available speakers to enhance your audio and video experience.

Remote disc for Apple TV or other ways to steam DVD to Apple TV

With the new MacBook Air Apple introduce "Remote Disc" for sharing DVD/CD drives from another computer. Will this add on be added in Apple TV or how can I stream my DVD's to my Apple TV?

Imaginos1892 wrote:
I have over 500 DVDs. I have neither the time nor disk space to make copies of them all. I want to grab a DVD from the shelf, stick it in a DVD drive, and watch it. I want to be able to rent a DVD, stick it in a drive, and watch it. I don't want to be forced to spend an hour copying it first. When Blue-Ray finally joins the free world and stops refusing to play because your entire playback path does not support end-to-end encryption as dictated by the movie companies, I will want to stick a Blue-Ray disk in a drive and watch it. And until AppleTV will do that, either on an internal drive or by network drive sharing, until it can REPLACE one or more of the boxes sitting under my TV instead of just adding another box to the mass, I really have no use for it.
don't buy it then, simple as that.
with just 1 post, did you come here just to spout your opinions on how the world is against you ?

EJB3 - More than one remote interface for Session Bean?

Hi,
Is it possible in EJB3 to have more than one remote interface for a SessionBean?
I have seen it posetd on here that it is possible but never been able to find any other information.
Using JBoss as my App Server, I have deployed an App, where a SessionBean is defined as implementing 2 interfaces, both of which are annotated using @remote.
However when I examine the JBoss JMX Console, Global JNDI Namespace only one remote interface is listed, and indeed it is the first one defined in the SessionBean.
Considering I use a String similar to (MyApp/MyBean/remote) to do the JNDI lookup, this would indicate that it is not possible to have more than one remote interface.
1. Is this a JBoss specific limitation?
2. Is there another way of performing the JNDI lookup?
Thanks,
Alan.

Hi,
Thanks for prompt response! I tried the suggestion in my application, and the output from JBoss JMX Console was
+- XXXBean (class: org.jnp.interfaces.NamingContext)
| | +- remote (proxy: $Proxy291 implements No ClassLoaders found for: xxx.xxx.xxx.xxx.xxx.Remote1 (no security manager: RMI class loader disabled))Again only displaying the remote interface that is first in the @remote ({ Remote1.class , Remote2.class}) list. This would lead me to believe that JBoss does not support this.
Can anyone confirm this?
Alan.

Remote key for lookup tables

Hi,
I need some advice on remote keys for lookup tables.
We have loaded lookup data from several client system into the MDM repository. Each of the client system can have diffferences in the lookup values. What we need to do is to enable the keymappings so that the syndicator would know which value belongs to which system.
The tricky part is. We haven't managed to send out the values based on the remote keys. We do <b></b>not<b></b> want to send the lookup tables themselves but the actually main table records. All lookup data should be checked at the point of the syndication and only the used lookup values that orginally came from one system should be send to that particular system. Otherwise they should be tag should be blank.
Is this the right approach to handle this demand or is there a different way to take care of this? What would be the right settings in the syndicator?
Help will be rewarded.
Thank you very much
best regards
Nicolas

Hi Andreas,
that is correct. Let's take two examples:
1) regions
2) Sales Area data (qualified lookup data)
Both tables are filled and loaded directly from the R/3s. So you would already know which value belongs to which system.
The problem that I have is that we will not map the remote key from the main table because it will be blank for new created master data (Centralization scenario). Therefore we cannot map the remote key from the attached lookup tables, can we?
The remote key will only work for lookup tables if the remote key of the actual master data is mapped. Since we don't have the remote key (local customer ID form R/3) in MDM and since we do not create it at the point of the syndication... how would the SAP standard scenario would look like for that?
This is nothing extraordinary it's just a standard centralization scneario.
Please advice.
Thanks alot
best regards
Nicolas

Remote triggering for synchronization

Similar Messages

Maybe you are looking for