RemoteFX Server 2012 R2 (Not Working?)

Hi Guys,
I have a 2012 server r2 for testing, trying to get a smooth connection. We have fixed one issue by enabling UDP, and I can now confirm this is working. However, the connection locally (100mbit) when playing youtube videos still seems to be laggy.
Am I missing something? RemoteFX is on by default in 2012.
The only thing I can find is in the Event Log I have the following:
"The connection is not using advanced RemoteFX RemoteApp Graphics"
Is there anyway I can work out if it's working correctly?

Hi,
Firstly, I would like you to check the version of graphics card you are using for RemoteFX feature. To get full benefits of RemoteFX on server 2012 R2, you must requires a compatible graphics card. At a minimum, the requirements for graphics cards to be used
with RemoteFX are:
- DirectX 11.0 or later
- WDDM 1.2 driver or later
More information:
GPU Requirements for RemoteFX on Windows Server 2012 R2
In addition, there are policy settings with which you can try to configure RemoteFX graphics with server scalability or bandwidth usage. You can change for “Configure RemoteFX Adaptive Graphics” under below mention
path:
ComputerConfiguration\AdministrativeTemplates\WindowsComponents\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment
Additional Information:
RemoteFX Adaptive Graphics in Windows Server 2012 and Windows 8
Hope it helps!
Thanks.

Similar Messages

Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working

Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message:
Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2    at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.    This seems also to be a SP set up issue.
Thanks a lot.

Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$IndexLocation = "C:\Search" #Location must be empty, will be deleted during the process!
$SearchAppPoolName = "SSAPool"
$SearchAppPoolAccountName = "mydomain\admin"
$SearchServiceName = "SSA"
$SearchServiceProxyName = "SSA Proxy"
$DatabaseServer = "W12R2DC1"
$DatabaseName = "SSA"
$spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
if (!$spAppPool)
$spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
$ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
# process stays at the following step forever, already one hour now.
$ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer $DatabaseServer -DatabaseName $DatabaseName
Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
(1) Crawler:Content Plugin under source Crawler:Content Plugin
Content Plugin can not be initialized - list of CSS addresses is not set.
(2) Warning for SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(3) Error for SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
(4) Error for SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
(5) Error Shared Services for SharePoint Server Search
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
Above errors keep being generated. Last step for SSA creation stay there forever. Any clue what is really going on? Thanks.

SharePoint server 2013 Search Service App on Windows server 2012 R2 not working

Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM
was set up to access the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate
to search service app admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is
in a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem
with Search Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.
Thanks a lot.

Hi,
According to your post, my understanding is that SharePoint server 2013 Search Service App did not work on Windows server 2012 R2.
Please make sure you configure Search Service Application correctly. You can refer to:Create and configure a Search service application in SharePoint Server 2013
I recommend to created new Search Service Application, and made a full crawl. Then assigned the new SSA as the default SSA for webapplications. Finnlay checked the issue doesnt occur now,
If all search related components now are online, to keep the enviroonment clean, you can delete the old SSA.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Windows Server 2012 Essentials (not R2) - all client computers offline

The server is Windows Server 2012 Essentials (not R2). I have had this problem ever since I first installed the Windows Server 2012 Essentials server in the summer of 2013 (before R2 was released). The Windows Server 2012 Essentials server shows offline
for all Devices under Dashboard. (Allow me to add that I just installed another site with Windows Server 2012 Essentials R2, and it was a breeze - all of the computers at the second install site are online.) I have one Windows 8.1 Pro client and the rest
are Windows 7 Pro clients. The problem occurs on ALL client computers.
I have removed computers from Devices in Dashboard on the server, rebooted the server, changed the client computer to a workgroup, rebooted the client computer, and reinstalled the connector software on the client computer. Same result. I
have tried this on a Windows 7 Pro client and a Windows 8.1 Pro client with the same results.
After running the connector on a client computer and waiting for the server to update its Devices status, if I look under Devices on the server Dashboard, the Windows 8.1 client computer will say online but within 24 hours it goes offline again. The
Windows 7 client computers never show online. Both computers stay offline - they NEVER show an online status (referring to the status under Devices in Dashboard).
I should make it clear that the clients can access the server shares with no problem. File synchronization works great. The clients can ping the server and the server can ping the clients. But client backups on the server fail.
One of the most troublesome things about this problem is that it prevents the client computers from being accessed remotely using the website setup by Anywhere Access. I can login to get remote access to the shared files on the server, but
the only computer that says "online" is the server. All of the other computers are "offline".
The server and clients are only using Windows firewall. The clients all use Microsoft Security Essentials for their anti-virus.
I used a troubleshooting tool that tells me that there are problems with port 6602 on the server, but the clients are all fine with port 6602. I know port 6602 is important for using Anywhere Access but I am still trying to find out more details on that.
I have checked all of the firewall settings related to port 6602 on the server, and the firewall settings look like the standard Windows settings for this port. I used netstat to find the PID associated with the port, and I looked up the PID to find the service.
That all looked standard, too.
I have been working on this problem since the summer of 2013!! Does anyone have ANY suggestions?!!
HELP!

Hi,
Just addition, please check if all necessary Windows updates are installed on those
“Offline” client computer.
When connect client computers to the Windows Server 2012 Essentials server by using the Connector software, there
will be LAUNCHPAD on the client computer. Was this LAUNCHPAD grayed out? Please check if can access Shared Folders via this LAUNCHPAD. Meanwhile, please ping the Windows Server 2012 Essentials via IP address and server name when client computers show as
Offline. Any find?
Get Connected in Windows Server Essentials
In addition, please follow the path on Server and client computer:
%programdata%\Microsoft\Windows Server\Logs. Did you check any relevant Server-side logs and
Client-side Logs if find more clues?
Windows
Server Essentials 2012/2012 R2 Log Files
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I would like to know why when i make a web page and test in my local browser it works fine then when i tranfer to my server i does not work fine example i used javascript to put a prompt bar on a page and it worked fine local but on server not working

how come when i make a web site and i test it in my local server it works fine when i tranfer to server certain things do not work example i used javascript to put in a prompt bar for a newsletter page at the server it did not work but at local it did also it works at MOZZILLA but not internet explorer i also have cs4 was wondering if there is a way to test a page in dreamweaver and then transfer THANK YOU X-FACTOR-MEDIA

In future, please try to make the subject line of your posts shorter. In this case the following would have been sufficient: "JavaScript works locally, but not on remote server".
Short, but meaningful subject lines make it easier for others to identify what your question is about, and often bring faster help.

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

Windows 8 and Server 2012. Not detecting network is a domain.

Hi Guys,
I hope I have posted this to the correct forum.
I have 2 x Windows 8 PCs that do not detect that they are connected to a domain (network location awareness not working). I can join them to the domain but they still don't recognise the network as a domain. Instead they identify it as "private".
Other PCs on the network (Win XP and Win 7) work prefectly, just the windows 8 machines don't work.
Also, when I do join them to domain I also receive this message.
"changing the Primary Domain DNS name of this computer to "" failed. The name will remain xxxx.local. The error was: the specified domain either does not exist or could not be contacted. "
I have tried the following
- DHCP and DNS has being tried both as static and dynamic (can ping DNS server which is the domain controller Windows Server 2012) .
- Updated PC NIC drivers.
- No AV is installed on either server or PC.
- Updated PC to windows 8.1.
- Disabled both server and PC firewalls.
- Check NLA service and all dependent services are running.
- Disabled all adapters on server except for one.
I am really hoping someone can help with this as I would really appreciate it.
Thanks.
Shaun

Hi Guys,
I managed to find a solution to the problem. I noticed that the DNS server zones did not look quite right. The _msdcs zone was missing the subfolders (dc, domains, gc, pdc).
To fix this issue: on the NIC adapter I had to tick the box "register this connection's addresses in DNS" (found under TCP/IP v4 > advanced > DNS tab).
I then had to remove the DNS role, reboot then re-add the role. Problem solved. Hopefully this saves someone else pulling their hair out for an entire day.

Windows storage server 2012 share not connecting by share name but connecting thru IP address from windows XP machines

We have a windows storage server 2012 (HP storage server) in our domain. All of sudden We had a issue, connecting the server shares using the share name only from XP machines, but it is connecting through IP address with a delayed response. We are getting
the below error message from all the windows XP SP2 machines in our domain.
"\\<share name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have a access permissions.
Login Failure: The target account name is incorrect."
But it is connecting while we are trying from windows 7 machines. Also the other server shares (Windows 2003 server) are connecting without any issues using the share name. In addition to this we gave everyone permission for this share. And it worked
well before but not now. Could you please suggest any solution for this complex issue?
Thanks,
UdayaKumar S

Hi,
We are getting the below critical alert mail often from our storage server. This could be the problem?
vent from Blade NODE01.*****.com, In Enclosure: EM-E83935ED70F6, Network Interface Lost Connectivity.
Description: "A network interface has failed. An Ethernet adapter's status changed from OK to Error, or an Ethernet team's status changed to Error from another state."
Source: CIM Indication from CSP Provider
Date: 02-06-2014 Time: 18:52:26
Blade: NODE01.****.com
NetworkAddresses:
Severity is Critical
Recommended Actions: Check the network cables, switches, and hubs for the cause of the failure.
Note: For More information please refer the Windows System Logs in the Event Viewer

Windows Server 2012 Essentials not listed in EasyStartup 3.8.1d for TS140

Recently purchased a TS140 (70A4 001RUS). Came factory installed RAID 1 with Windows Server 2012 Essentials pre-installed. Needed to reinstall, however:
- Windows Server 2012 Essentials does not show up in EasyStartup 3.8.1c DVD that came with server
- Downloaded latest EasyStartup 3.8.1d and created bootable DVD and ran with same result
- "Windows Server 2012" is listed (but not Essentials). Running this installation, it does not recognize the Windows Server 2012 Essentials External Recovery DVD that came with server. Continually asks to insert "Windows Server 2012" disk.
- "Windows Small Business Server 2011 Essentials" is listed (but not 2012 Essentials). Running this installation, it does not recognize the Windows Server 2012 Essentials External Recovery DVD that came with server. Continually asks to insert "Windows Small Business Server 2011 Essentials" disk.
- Have booted using UEFI, Legacy and Auto with no difference
- Ran lastest Firmware Updater v1.8.1013 - no updates listed as required
- Have updated BIOS to latest 70A
- Server will also not boot directly from Windows Server 2012 Essentials External Recovery DVD (dvd is set 1st in boot order in bios)
- Windows Server 2012 Essentials External Recovery DVD is readable on other machines - can copy to bootable USB key and run regular Windows installation on server (this is current workaround)
- using the above workaround, drivers must be installed manually.
- EasyStartup 3.8.1d Readme specificly lists Windows Server 2012 Essentials as supported on the TS140 in UEFI and Legacy mode here
As mentioned, the above workaround can work. However, this server may not always be maintained by myself and I would prefer the supplied software to acutally work properly for ease of use by others in the future.

I have several TS140s running WSE 2012 R2. Like you said, the easystart does not recognize properly the WSE R2 os, so I just did the basic from disc or USB install after I configured the boot drives or RAID1 array.
The main reason to load the easy start is for drivers, however WSE found and recognized all the hardware in the unit.

Windows server anywhere access not working from outside the lan

ok so heres what i have done so far i installed windows server 2012 essential on a computer followed the wizard to add a couple of users and gave them anywhere access followed the wizard and ran the anywhere access to completion setup the ports 80 and 443
on router manually to forward to my router ip 10.0.1.20
my server is still on dynamic ip
then i go to a windows 7 ultimate computer whent to the connect url downloaded the connect tool ran to completion and restarted the computer so far everything working inside my lan i can connect to the server see shared files and open the dash management
now i go outside connect to a wired or wireless network of a friend and try to connect to http://xxxxxxx.remotewebaccess.com
but am unsuccessfull then i check on my network adapter page and see that there is a new adapter that is called as my remotewebaccess.com so i click on it and try to connect but still fails........
please help what am i doing wrong?
i checked everywhere and cant find a solution.
Thank you

It is probably better to assign a static IP to your server, but OTH it may not change. But you really hate to go off on vacation and have the ip change and everything break.
Now you said you forwarded ports 80 and 443 to your router, I bet you meant your server?
Do www.whatismyip.com and from outside ping xxxx.remotewebaccess.com and make sure they are true same ip
From a PC or the server on your network go to grc.com and do shields up and make sure it reports 80 and 443 as open
Grey

Utterly and totally LOST and CONFUSED getting IE10 in Server 2012 x64 to work

I am at my wits end, I believe I posted in here before but am still having tons of problems with IE10 and Server 2012 x64. Can someone shed some light on ANY of the following:
1)Is IE10 embedded with flash player by default or not? If so what version?
2)If IE10 is embedded with flash player how do I get it to consistently work and show the flash player test movie from Adobe's site instead of a gray box (following steps on site does NOTHING to fix issue)?
2b) I have had some success simply changing the following security settings for the Internet Zone in Security:
Settings>Internet Options>Security>Internet Zone, click custom level> Active X Controls and Plugins> Script ActiveX controls marked safe for scripting: enable
Settings>Internet Options>Security>Internet Zone, click custom level> Scripting> Active Scripting: enable
on some machines the above works and I see a flash movie, other machines not.
3)What is the shockwave flash object in my add-ons for IE? Some machines have this and some don't. Was it installed by default or installed manually? I cannot install this on non working machines where it is missing as the install page from adobe (get.adobe.com/flashplayer) says there is nothing to install since IE 10 should have flash player embeded by default. (it says flash player is integrated with Windows Explorer in Windows8. You do not need to install Flash Player and the bottom of IE says an add-on for this website failed to run).
This is a NIGHTMARE process that doesn't work and is pathetic. Can someone please steer me in the direction to get this simple POS to work? Something that should work by default doesn't, and then should take no more than 10 minutes is wasting hours of my time.

Hi,
The RoboHelp 10 API should work for WebHelp created with RoboHelp 9. Since the RH10 API will now support Multiscreen HTML5 (introduced with RoboHelp 10), I imagine it will work with VS 2012. But I’ve not tried that. You can try the RH10 API, but Adobe won’t support it
Alternatively: A colleague of mine created a custom C# API some time ago. That might work for you: http://www.wvanweelden.eu/blog/2012/08/03/custom-webhelp-apis
Greet,
Willam

Compact Server 4.0 not working in Visual Studio 2014 app

I have an application that uses Microsoft SQL Server Compact version 4.0. The application works on Windows 8 and it works on windows 7, but it doesn't work on Small Business Server. I created the application with a compact server so it would be flexible
enough to be installed on anyone's computer. The error I am getting is as follows
"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: sQL Network Interfaces, error: 52-Unable to locate a Local Database Runtime installation. Verify that SQL Server Express is properly installed and that the Local Database Runtime feature is enabled.)"
I verified that the install folder has permissions and the application is running as administrator. Does anyone have an idea of what else I should check? I was looking at Visual Studio and I didn't see how to set "remote connections". Plus the
application works on my machine (where it was designed).
Thanks for any help you can provide.
Hmm... I feel like I have more questions than answers. If you find my reply helpful please mark as Answer below. Thanks.

Hi Trewaters,
SQL Server Compact has been deprecated from Visual Studio 2013. Refer to this
connect item.
According to the error message, I recommend you install SQL Server 2014 Express or SQL 2014 LocalDB, which can be downloaded from below link.
http://www.microsoft.com/en-us/download/details.aspx?id=42299
LocalDB is created specifically for developers. It is very easy to install and requires no management. While LocalDB is meant for developers, the regular SQL Server Express will continue to exist as a free SQL Server edition, fully compatible with and easily
upgradeable to higher SQL Server editions.
For more information about SQL Server LocalDB, you can review the following articles.
http://blogs.msdn.com/b/sqlexpress/archive/2011/07/12/introducing-localdb-a-better-sql-express.aspx
http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
Thanks,
Lydia Zhang

SQL server 2012 does not see local disks other than C being started under domain account (which is local admin on the server)

Hi all. We have a SQL Server 2012 installed to a fresh Windows Server 2012 Server. There is a service account domain\rusystem01 created to run SQL services. It is added as a Local administrator on this server.
The issue is that SQL Server does not see any local drives (other than C drive) on the server if we run it from this domain service account (for example, we cannot move any databases to any other drives or setup backup).
It works fine (and other drives ARE available) if SQL Services are started from Network service account or Local service account (which is not recommended by Microsoft). But does not work from domain account.
Any ideas how to fix this?
MCP

>Any ideas how to fix this?
Apply NTFS ACLs for the folders (and perhaps volumes*) for SQL Server. Use the Per-Service SID, rather than the Service Account for the ACLs so they survive changing the service account.
The per-service SID is "NT Service\MSSQLSERVER" for a default instance and "NT Service\MSSQL$InstanceName" for a named instance.
*Volume ACLs are set in Disk Management.
David
David http://blogs.msdn.com/b/dbrowne/
David, would you please clarify what do you propose? I open D: volume on the Disk management and grant NT Service\MSSQL$DEV account with Full control permissions. Restarted SQL - no effect. Still only C: is visible for SQL.
MCP

Server 2012 R2: Publish "Work Folders"

Hi
We want to deploy Work Folders. These folders must be accesibles from Internet (without VPN or DirectAccess).
We've TMG infrastructure. My question are:
1) Could we use TMG to publish these folders? Is there any limitation ?
2) I suppose that only Windows 7 (domain computer), Windows 8.1 (workgroup o domain computer) can use this feature. Any support for iPAD, Android, Windows Mobile, etc...??

Hi,
You can use TMG server to publish Work Folders. Personally, I would like to recommend you to use Web Application Proxy to publish Work Folders instead of using TMG, as
Web Application Proxy is a new feature in Windows server 2012 R2 and the mainstream for TMG will be not supported in 2015.
PCs and devices are supported clients for Work Folders. However, Work Folders apps for devices are not announced.
Best regards.
Susie

Connection to server via smb not working

hi,
i have an old G4 iBook 10.3.9 that i'm using for school. to connect to our school server for course material, we were given smb log-in instructions from our it dept. when i put in the ip address, i get a prompt for the id and password, but i cannot get access. we tried logging on with my professor's macbook pro (10.5) and it worked flawlessly.
i've done all software updates and rechecked the procedure dozens of times, but i can't figure out why it's not working. if anyone has an idea, i'm all ears.
thanks,

created in my UTF-8 Mysql DB your table and inserted a record; the select shows:
SQL> select * from "movieclass"@mysql;
idClass
ClassName
123
H e l l o
As you can see the content is there, the "space" between the letters is related to unicode. Each character is interpreted by 2 bytes and SQL*Plus wrongly displays both. Using iSQLPLus or SQLDeveloper does not show the "space" between the letters.
Here the data type mapping:
SQL> desc "movieclass"@mysql;
Name Null? Type
idClass NUMBER(3)
ClassName NOT NULL NVARCHAR2(50)
What's the exact version of DG4ODBC you're using? 11.1.0.7?
According to the listener file you're using DG4ODBC on Windows. There was a high/low byte issue in DG4ODBC for Windows. This issue is fixed in 11.1.0.7 and a certain patch. So I recommend you to get first the 11.1.0.7 patchset (if you don't already have it installed):
6890831 Oracle Database Family: Patchset
11.1.0.7.0 PATCH SET FOR ORACLE DATABASE SERVER 11.1.0.7.0
and then please apply also the latest patch:
8689191 Oracle Database Family: Patch
ORACLE 11G 11.1.0.7 PATCH 16 BUG FOR WINDOWS 32 BIT 11.1.0.7.0
There was a high/low byte issue
Edited by: kgronau on Aug 11, 2009 10:28 AM

RemoteFX Server 2012 R2 (Not Working?)

Similar Messages

Maybe you are looking for