Remoting with powershell to manage cluster

Hello. I have installed admin tools on windows 8.1. I can use all the available tools/snap-ins except for the failover cluster manager. That's because the cluster is based on winserver 2008 r2. That's okay. Now to the problem. I want to use the failover
cluster module in powershell instead, but when I run the import-module failoverclusters, the module cannot be located on any module directory. I checked the specified path; c/windows/system32/powershell/v.10/modules and the failovercluster folder is there.
I am using powershell 4.0 on windows 8.1. What can I do import the module and use the it's commandlets? Help.

Hi,
The Server Manager on Windows 8.1 or 2012r2 just has the Limited support to manage 2008r2. The detail content please refer the related KB:
Manage Multiple, Remote Servers with Server Manager
http://technet.microsoft.com/en-us/library/hh831456.aspx#BKMK_softconfig
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Integrating multiple UCCX clusters with same Call Manager Cluster

I want to know if I can integrate multiple UCCX clusters with 1 Call Manager cluster? If yes, can someone please point me to the documentation.
I appreciate all the help..
Thanks!!!

Hi
Yes, you can. I'm not aware of specific documentation for this, but a couple of notes:
- Make sure you use unique resource accounts (e.g. JT user in particular as that is automatically managed by UCCX and one cluster WILL break the other)
- I would also use unique AXL accounts and probably RM accounts. RM you could share between clusters to just have one RM account to associate any agent phone to, but it's safer to have single-purpose service accounts.
- You can't assign a user to a particular cluster - so you enable IPCC Extension on one user, they appear in 'resources' on both UCCX servers.
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Getting "Serialized xml is nested too deeply" when trying to restart AppFabric Cache Cluster remotely with Powershell

Hi! I´m Getting the following error when trying to restart the AppFabric Cache Cluster:
PS C:\temp> .\restartappfabric.ps1
Serialized xml is nested too deeply.
+ CategoryInfo : OperationStopped: (ServerName:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
+ PSComputerName :
ServerName
Here's The Script:
$ServerName="ServerName"
$sc = {
Import-module DistributedCacheAdministration
Use-CacheCluster
Restart-CacheCluster
Invoke-Command -computername $ServerName -scriptblock $sc
Powershell remoting is fully enabled and working fine con remote computers. When testing the script against a TEST computer is working fine, but when executing the script against PRE & PROD servers I get the error described above.
Running the lines within the scriptblock locally in the servers works fine.
Any help on this would be appreciated.
Thanks

Thanks man for your help. Tried using the connectionstring but got the same results
PS C:\temp> Invoke-Command -ComputerName Servername {import-Module DistributedCacheAdministration;Use-CacheCluster -P
rovider XML -ConnectionString "\\vmbcorp.com\FS\ApplicationContent\PRE\AppFabricCache" ;Restart-CacheCluster}
Serialized xml is nested too deeply.
+ CategoryInfo : OperationStopped: (BBLAMTPDAFC01:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
+ PSComputerName : BBLAMTPDAFC01
PS C:\temp>
Running the commands locally with the ConnectionString swith works as well. Running out of Ideas.. May be using psexec..

Please share experience with managed cluster

Folks,
I am curious to hear about your experience with compressor's managed cluster.
Here is my experience with a setup that consists of
a) 8 quadcore mac mini, with Mountain Lion and Compressor 4.06
b) NFS storage connected with 1gb link to each mac mini
c) Compressor preference set to never copy to/from cluster storage
Experiment 1: One managed cluster with 4 compressor service instances on eight mac mini. So a total of 32 compressor instances.
The instances are set to send an email when they go down.
Source: 4K Image sequence with 1850 images
Target: Apple ProRes 422 (default)
Output: NFS storage
Observations:
1) The target codec determines the number of segments the job gets broken down into. For example the HD 1080p setting will break the job into atmost 6 segments (regardless of 32 instances that I have available). In case of ProRes 422 the number of segment were 64 ie 2x more than the number of instances available.
2) The compressors service instances are extremely temperamental and flimsy. I got over 100 error notification for this experimental job, about a dozen instances of compressor were in bad state/dead and the job failed with many errors as follows.
The error seems to indicate an issue with file naming, but I am unsure what it points towards
1/26/13 7:03:54.815 PM compressord[12399]: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSPlaceholderString initWithFormat:locale:arguments:]: nil argument'
*** Call stack at first throw:
          0   CoreFoundation                      0x982c712b __raiseError + 219
          1   libobjc.A.dylib                     0x92eea52e objc_exception_throw + 230
          2   CoreFoundation                      0x98226bbb +[NSException raise:format:] + 139
          3   Foundation                          0x93885d02 -[NSPlaceholderString initWithFormat:locale:arguments:] + 99
          4   Foundation                          0x93886e8c +[NSString stringWithFormat:] + 88
          5   AECore                              0x000805da -[ImageSequenceMedia fileURLForFrame:] + 399
          6   AECore                              0x00082908 -[ImageSequenceMedia readImageInfo] + 118
          7   AECore                              0x00080968 -[ImageSequenceMedia isNativePixelFormat:] + 34
          8   StompTypes                          0x0032b791 _ZNK27CExtendedImageSequenceMedia19isNativePixelFormatEi + 47
          9   StompTypes                          0x003202d1 _ZN5stomp13IMediaDecoder20IsDecodablePixelTypeEiRK7CURLRefRKNS_18CFilterSetting sRefE + 71
          10 Transcoding                         0x004c4ac4 _ZN5stomp17CQTSpitTranscoder16optimalPixelTypeERKNS_18CFilterSettingsRefE + 856
          11 Transcoding                         0x004c5ca3 _ZN5stomp22CQTSpitMovieTranscoder22configureSpitComponentEm + 761
          12 Transcoding                         0x004c38eb _ZN5stomp17CQTSpitTranscoder3runEv + 327
          13 Transcoding                         0x004a8498 _ZN5stomp16CStompTranscoder15_processRequestERKN5swamp18IServiceRequestRefE + 3740
          14 ServiceControl                      0x00cbde00 _ZN5swamp24CServiceControllerThread7runOnceEv + 2068
          15 AECore                              0x00023364 _ZN6aecore7CThread9runThreadEv + 36
          16 AECore                              0x00020ffc _Z10threadProcPv + 17
          17 libsystem_c.dylib                   0x95b5d557 _pthread_start + 344
          18 libsystem_c.dylib                   0x95b47cee thread_start + 34
******************************************************************************** ******************************************************************************** ************ Experiment 2: Experiment 2: One managed cluster with 2 compressor service instances on seven mac mini. The master controller is not running any compressor instances its just taking care of house keeping. So a total of 14 compressor instances.
Source: 4K Image sequence with 1850 images
Target: Apple ProRes 422 (default)
Output: NFS storage
Observations: job failed, two dead compressor instances and about 20 error notifications of instance down
Conclusions:
Overall, the jobs which transcode movies from one format to another have a good chance of success. However the same is not true for Image sequences.
The distributed compressor instances are extremely flaky and their revival scheme of four times(as per documentation) is not enough.
I am eager to know your experience with distributed encoding using compressor.
a) What are your thoughts on stability of distributed encoding using compressor for a large number of jobs
b) Is there an automatic way to revive dead compressor instances?
c) What other tools are out there which perform better? I am looking for a way to setup unmanned operation.
Cheers
-A

Have been playing around with Report Designer and I found it useful for basic formatting but not for the one's you had mentioned in your post.
SAPs suggests you do all the data manipulation in the Query Designer or Infocube and use Report Designer for just formatting the data. In the past we had issues where we could not certain calculation in query designer and have used Crystal Reports along with BI data for similar kind of things which you had mentioned in your post (using sub reports and report level data manipulation). Report Designer unfortunately does not provide any of these functionalities.
I have seen comments from SAP saying Report Designer will be developed further, not sure of any specific functionality whichis coming in. I think it is SAPs first step in the formatted reporting area and may be in the future we will have a tool which can handle much more complex scenarios!
Thanks.

Can I remotely failover clusters with powershell from a non clustered server? Windows Server 2008 R2

Hello,
I'm trying to remotely administer my windows clusters and fail them over with a PowerShell Script. The server I'm using is not a clustered server. I've already installed the Failover Clustering Tools. I'm able to retrieve information about
my clusters but when I try to fail them over I receive an error saying "The cluster service is not running."
The command I'm using is 'Get-ClusterNode $Server | Get-ClusterGroup | Move-ClusterGroup'
Error message: 'Get-ClusterNode : The cluster service is not running. Make sure that the service is running on all nodes in the cluster'
Is there a way to install the cluster service or is there a different way to go around this error?
Thank you!

Hi Armando,
To get cluster node information, please try to use the cmd cluster.exe, like:
cluster.exe node NodeName /force
For more detailed information to use clusterexe, please refer to this article:
Mapping Cluster.exe Commands to Windows PowerShell Cmdlets for Failover Clusters
To remotely manage Cluster server, you can also try the powershell pssession with the cmdlet enter-pssession to accesss the remote server:
Learn How to Manage Remote PowerShell Sessions
I hope this helps.

How to manage a connection with powershell using visual studio with C#

Hi
I want to manage a connection with powershell for a web app using visual studio with c#. and also run command with pipeline
Plz give a some suggestions..

Hi Raj_Kumar_Saini,
To make things clear, could you please clarify these thing?
1. Do you mean you want to execute some PowerShell scripts from C# language? These blogposts may give you some ideas:
Executing PowerShell scripts from C#
Powershell Automation and Remoting (a c# love story)
Execute PowerShell from a ASP.NET Web Application
2. Is your question related to Visual Studio Integration? Do you want to build a Visual Studio Extension?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SCOM 2012 Get Gray Management Servers With PowerShell

Hi,
I have SCOM 2012 R2.
I want to get all the Management Servers that are in Gray state using powershell. How can I do that?
I couldn't find anything good in the internet.
The best I got was Get-SCOMManagementServer but when I tested it out - it still showed that my gateway's HealthState was "Success" even though it was gray.
Thanks,
Yakir.

Hi,
Check if this one helps
Get-SCOMClass-name"Microsoft.SystemCenter.ManagementServer"|get-scomclassinstance|selectdisplayname,healthstate
I dont what is your final objective, but check this link
http://blogs.technet.com/b/jasonrydstrand/archive/2013/03/27/daily-scom-health-check-with-powershell.aspx

Managing from Powershell 4 machines with Powershell 2 (WinRM)

Hi,
is it possible to manage machines which have powershell 2 installed from a machine with powershell 4?
Background: I plan to write a script running in powershell 4 and like to query servers with have either powershell 2 or powershell 4 installed.
Is that possible? Is there something I need to consider?
Thanks for your feedback
Ruben

You cannot get scheduling from WMI.
You do not need WinRM to use WMI. WF does not necessrilu use WInRM. These are all separate technologies in WIndows that just happen to be available to PowerShell.
Start by learning how Windows works and what all of these technologies do.
You cannot guess your way through any of this. Without good fundamtentals in WIndows technologies you will not be able to understand the lessons or discussions.
Here is a blog that has many good backgrounders and examples:
https://social.technet.microsoft.com/Search/en-US?query=workflow&rn=Hey,%20Scripting%20Guy!%20Blog&rq=site:blogs.technet.com/b/heyscriptingguy/&beta=0&ac=2
¯\_(ツ)_/¯

Enable Remote Desktop Connections with PowerShell

What is the easiest way to enable remote desktop connections on Windows 7, with powershell?

Use Shay Levy's "Remote Registry PowerShell Module", and modify the value of the "fDenyTSConnection" value in the
key "HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server" on the remote box to "0"
The Windows 7 box will need to be rebooted before it will take effect.
See http://oreilly.com/windows/archive/server-hacks-remote-desktop.html
Or, grab Michal Gajda's script "Enable-RDP.ps1" in the gallery :)
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
My Blog: http://unlockpowershell.wordpress.com
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ("6B61726C6D69747363686B65406D742E6E6574"-split"(?<=\G.{2})",19|%{[char][int]"0x$_"})

How can get value of registry DWORD value of remote computers with powershell

HI
I am using below script to get registry of remote computers with powershell but not desired result.
$computers = Import-Csv 'C:\New folder\dclist.csv'
$key = "SOFTWARE\Microsoft\Active Setup\Installed Components\{A509B1A7-37EF-4b3f-8CFC-4F3A74704073}"
foreach ($computer in $computers)
Get-RegDword -ComputerName $computer -Key $key -Value IsInstalled
As I have installed remoteregistry pssnapin a well..
Also How can i get this from Invoke-Command ............
Please help or guide me

This script may help (I haven't used it personally, but I know that many people have used it and thanked Jason for coming up with it):
http://gallery.technet.microsoft.com/scriptcenter/Enable-PSRemoting-Remotely-6cedfcb0
You can also configure remoting across your entire domain via GP:
http://www.briantist.com/how-to/powershell-remoting-group-policy/
http://blog.powershell.no/2010/03/04/enable-and-configure-windows-powershell-remoting-using-group-policy/
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Multi-Site WAN With Centralized Call Manager

The customer has HQ with 15 Branches. Head quarter has about 4300 Phones, and Branches has:
Branch 1 = 420
Branch 2 = 256
Branch 3 = 385
Brnach 4 = 298
Branch 5 = 262
Branch 6 = 171
Branch 7 = 200
Branch 8 = 97
Branch 9 = 198
Branch 10 = 254
Branch 11 = 269
Branch 12 = 224
Branch 13 = 90
I would still like to propose Centralized Call Manager Cluster with SRST, but little confused since the number of phones per branch is very high.
What would be best deployment model for this type of scenerio along with VoiceMail and CER.

Of course you can use CME/CUE, but the problem is that you need 3845 for SRST with CME/CUE, which cost a lot of money CISCO3845-CCME/K9 is $16495 plus CUE ($3000, not include voice mail subscriber box).
So I will agree what people suggest here.
I have centralized design (Publisher, subscriber) at Main Location, and another subscriber at remote site coz 500 users. I chose put subscriber there rather than use 3845 with SRST.
They share voice box at Main site (Unified).
The rest of remote site use SRST for backup.
Large remote site with T1 PRI with SRST if WAN down.
Small remote site with vic2-2fxo/4fxo with SRST if WAN down.
You can read the SRND here:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_book09186a00806e8a79.html
Also, you can design multiple cluster depends the location of main and branches. For example, half office located at West Coast, another half at East Coast. If I were you, I will create two clusters.
Again, it depends a lot of things, for example bandwidth, round-trip delay etc...
Hopefully, thats can help you.
Ken

Patchset3 (11.1.1.4/wls 10.3.4) Remote debugging JDPA in weblogic cluster

Hi,
I am using Patchset3 (JDeveloper 11.1.1.4/ weblogic server 10.3.4). I was wondering how i can remote debug with
a) weblogic managed server that is part of a weblogic cluster
b) the cluster itself that contains multiple managed servers.
Note that i do understand how to remote debug against a weblogic server (e.g. http://jdeveloperfaq.blogspot.com/2009/12/faq-4-how-to-remote-debug-adf.html), but have not been able to find out how i can achieve this against a cluster that has multiple managed servers. Any directions will be appreciated.
Thanks,

Hi,
haven't tried it but here are some suggestions that might be of help:
1) Each managed server for each cluster node should be setup for remote debugging. This means that each managed server must be started with the -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=4000,server=y,suspend=n* options in the WebLogic start-up script. Also Tunneling must be enabled for each managed server for each cluster node.
2) Make sure that you specify a different connection port for each managed server. This is indicated by the address* specifier above.
3) It seems logical to me that you will need to start separate instances of JDeveloper - one for each managed server that you need to attach to.
Let us know how it turns out,
Nick

Disk Utility has Lost Connection with the Disk Managment Tool

Hi,
For starters, this problem is not associated with the thread that Brian Z. has posted at the top of this forum. Having said that, here's my problem:
I had installed Security Update 2006-003, and Quicktime 7.1. Permissions were repaired before and after each installation, and all went well.
Some hours later, I was experimenting with Apple Remote Desktop. I had activated ARD in the System Preferences>Sharing pane, and it provided me an IP address associated with ARD. I then turned on Airport, and ARD provided me with an IP address associated with that connection. However when I turned off my modem connection, System Preferences>Sharing hung, and had to be Force Quit.
Console Log follows:
===== Mon May 15 2006 ===== 21:09:09 America/Anchorage =====
2006-05-15 21:09:17.488 System Preferences[2732] Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
2006-05-15 21:09:28.224 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:308
2006-05-15 21:09:38.230 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
2006-05-15 21:09:48.415 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
Thinking a plist had become corrupted, I trashed the following:
com.apple.systempreferences.plist
com.apple.RemoteDesktop.plist
com.apple.Remotemanagement.plist
com.apple.sharing.firewall.plist.
System Preferences started out very slowly, but then all the panes except Sharing would work ok.
I booted from the install disk and performed a Disk Repair. There were no problems reported.
When I tried to run a Repair Permissions, after about 20 seconds I got the, "Disk Utility has lost connection with the disk management tool and can not continue. Please quit and relaunch Disk Utility."
I quit D.U. and the Installer, and was able to successfully run a Repair Permissions from the D.U. in my Utilities folder. It had no problems to report.
Continuting to troubleshoot the System Preferences problem, I then trashed the com.apple.preferencepanes.cache. This solved my System Preferences>Sharing problem.
However, I am still unable to perform a Repair Permissions after booting from my install disk (I get the subject message). Repairing permissions from the Disk Utility in my Utilies folder works fine.
Any thoughts out there on a logical way to troubleshoot where my problem is? Is there a way to get a console log when I'm running DU from the install disk, or a comparable source??
Thanks,
Bob

I found this crash log that was generated about the time I had problems with System Preferences hanging.
Thoughts?
Bob
Entitled "writeconfig.crash.log"
Host Name: Bobs-Big-Mac.local
Date/Time: 2006-05-15 21:08:17 -0800
OS Version: 10.3.9 (Build 7W98)
Report Version: 2
Command: writeconfig
Path: /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
Version: ??? (???)
PID: 2707
Thread: 0
Exception: EXC_BREAKPOINT (0x0006)
Code[0]: 0x00000001
Code[1]: 0x90a8d2c0
Thread 0 Crashed:
0 com.apple.Foundation 0x90a8d2c0 _NSRaiseError + 0xf8
1 com.apple.Foundation 0x90a349d8 -[NSConnection sendInvocation:] + 0x6a4
2 com.apple.Foundation 0x90a2d8e0 -[NSObject(NSForwardInvocation) forward::] + 0x198
3 libobjc.A.dylib 0x90866810 objcmsgForward + 0xb0
4 writeconfig 0x0000baac 0x1000 + 0xaaac
5 writeconfig 0x0000ec84 0x1000 + 0xdc84
6 writeconfig 0x0000ad88 0x1000 + 0x9d88
7 writeconfig 0x0000abfc 0x1000 + 0x9bfc
PPC Thread State:
srr0: 0x90a8d2c0 srr1: 0x0202f030 vrsave: 0x00000000
cr: 0x24000442 xer: 0x00000000 lr: 0x90a8d298 ctr: 0x90a23528
r0: 0x00000000 r1: 0xbffff430 r2: 0xa0a204bc r3: 0xa0a34e20
r4: 0x9086eb88 r5: 0x20000000 r6: 0xbffff110 r7: 0x00000000
r8: 0x00000001 r9: 0x0030d370 r10: 0x00000239 r11: 0x28000442
r12: 0x90a23528 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
r24: 0x00310680 r25: 0xbffffcd8 r26: 0x00311c50 r27: 0xa0a2af6c
r28: 0xa0a30e7c r29: 0xa0a24ae0 r30: 0x003109a0 r31: 0x90a8d1d0
Binary Images Description:
0x1000 - 0x28fff writeconfig /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
0x80830000 - 0x8090efff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x8c2bc000 - 0x8c2c5fff libBSDPClient.A.dylib /usr/lib/libBSDPClient.A.dylib
0x8fe00000 - 0x8fe4ffff dyld /usr/lib/dyld
0x90000000 - 0x9014ffff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x901c0000 - 0x9026efff com.apple.CoreFoundation 6.3.9 (299.37) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x902b0000 - 0x90529fff com.apple.CoreServices.CarbonCore 10.3.7 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x905a0000 - 0x90610fff com.apple.framework.IOKit 1.3.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90640000 - 0x906c8fff com.apple.CoreServices.OSServices 3.0.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x90733000 - 0x90740fff com.apple.CommonPanels 1.2.1 (1.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x90810000 - 0x90810fff com.apple.ApplicationServices 1.0 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x90860000 - 0x908cffff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x908f5000 - 0x90912fff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x90940000 - 0x909b3fff com.apple.DesktopServices 1.2.5 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x90a20000 - 0x90b7bfff com.apple.Foundation 6.3.8 (500.61) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x90d40000 - 0x90d40fff com.apple.Carbon 10.3 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x90d50000 - 0x90d6bfff com.apple.SystemConfiguration 1.7.1 (???) /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x90d7c000 - 0x90d8cfff com.apple.speech.recognition.framework 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x90dd0000 - 0x90df0fff com.apple.DirectoryService.Framework 1.7.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x90e10000 - 0x90e11fff com.apple.ServerControl 10.2.3 /System/Library/PrivateFrameworks/ServerControl.framework/Versions/A/ServerCont rol
0x90e13000 - 0x90e4bfff com.apple.LaunchServices 10.3.5 (98.4) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
0x90e60000 - 0x90e66fff com.apple.ServerPrefs 10.2.3 /System/Library/PrivateFrameworks/ServerPrefs.framework/Versions/A/ServerPrefs
0x90e80000 - 0x90e9ffff com.apple.MediaKit 2.6 (232.3) /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
0x90ec0000 - 0x90ec0fff com.apple.Cocoa 6.3 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x9102d000 - 0x91047fff com.apple.openscripting 1.2.1 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x910c0000 - 0x910c1fff com.apple.AFPDefines 2.0.1 /System/Library/PrivateFrameworks/AFPDefines.framework/Versions/A/AFPDefines
0x910e0000 - 0x91134fff com.apple.bom 1.2.7 (64.1) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x91141000 - 0x91141fff com.apple.CoreServices 10.3 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91230000 - 0x9123afff com.apple.framework.machinesettings 1.3.3 /System/Library/PrivateFrameworks/MachineSettings.framework/Versions/A/MachineS ettings
0x91242000 - 0x9124cfff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
0x91251000 - 0x9125afff com.apple.DiskArbitration 2.0.5 /System/Library/PrivateFrameworks/DiskArbitration.framework/Versions/A/DiskArbi tration
0x912e0000 - 0x912f7fff com.apple.LangAnalysis 1.5.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x91303000 - 0x91370fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x913a0000 - 0x9145ffff ColorSync /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x915e0000 - 0x91699fff com.apple.QD 3.4.71 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x916f0000 - 0x91728fff com.apple.AE 1.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
0x91760000 - 0x917f3fff com.apple.print.framework.PrintCore 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x9194f000 - 0x9194ffff com.apple.audio.units.AudioUnit 1.3.3 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x91970000 - 0x919befff com.apple.print.framework.Print 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x91a40000 - 0x91ab3fff com.apple.NavigationServices 3.3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x91afb000 - 0x91b0bfff com.apple.ImageCapture 2.1.5 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x91b30000 - 0x91b44fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x91b60000 - 0x91b6bfff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x91ba3000 - 0x91bbdfff libresolv.9.dylib /usr/lib/libresolv.9.dylib
0x91bd0000 - 0x91bdffff libPSRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPSRIP.A.dylib
0x91c00000 - 0x91c13fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x92037000 - 0x92052fff libcurl.2.dylib /usr/lib/libcurl.2.dylib
0x92070000 - 0x92096fff com.apple.FindByContent 1.4 (1.2) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
0x92170000 - 0x92357fff com.apple.security 2.4 (179) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x927f0000 - 0x92827fff com.apple.CFNetwork 1.2.2 (7) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x9283f000 - 0x92857fff com.apple.WebServices 1.1.1 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
0x92880000 - 0x92c05fff com.apple.HIToolbox 1.3.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x92de0000 - 0x92e30fff com.apple.HIServices 1.4.1 (0.0.1d1) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x92e70000 - 0x9336ffff com.apple.AppKit 6.3.10 (743.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x93680000 - 0x93958fff com.apple.CoreGraphics 1.203.30 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x939d0000 - 0x939d4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x93a50000 - 0x93a64fff libcups.2.dylib /usr/lib/libcups.2.dylib
0x93a6a000 - 0x93a84fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib
0x93bec000 - 0x93ca4fff com.apple.audio.toolbox.AudioToolbox 1.3.4 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x94270000 - 0x94333fff com.apple.DiskImagesFramework 10.3.8 (77) /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
0x94580000 - 0x9458bfff com.apple.securityhi 1.2 (90) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x94593000 - 0x9459ffff com.apple.help 1.0.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x945b0000 - 0x945b9fff libz.1.dylib /usr/lib/libz.1.dylib
0x94650000 - 0x946affff com.apple.SearchKit 1.0.2 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x94720000 - 0x94721fff com.apple.securityfoundation 1.0 (6) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x94800000 - 0x9488cfff com.apple.ink.framework 101.1.4 (55.12) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x94e0b000 - 0x94e1efff com.apple.speech.synthesis.framework 3.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x95140000 - 0x951b5fff com.apple.DiscRecordingEngine 2.1.17 /System/Library/Frameworks/DiscRecording.framework/Versions/A/Frameworks/DiscRe cordingEngine.framework/Versions/A/DiscRecordingEngine
0x954c0000 - 0x95ac6fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x95b20000 - 0x95df0fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x95f00000 - 0x95f20fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x96028000 - 0x960f0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x968d0000 - 0x969b2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x96a04000 - 0x96a6dfff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x96aa0000 - 0x96acefff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x96b50000 - 0x96bdffff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x96c00000 - 0x96c67fff com.apple.audio.CoreAudio 2.1.3 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x96cb0000 - 0x96d9efff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x96de0000 - 0x96df0fff com.apple.vecLib 3.0.3 (vecLib 3.0.3) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x96ee0000 - 0x96ee8fff libbsm.dylib /usr/lib/libbsm.dylib

Read Outlook Email and Get Specific Content from Mail with PowerShell

Hi Everyone,
I would like to get full content value by searching in mail body with PowerShell but I stuck at one place in scripting and would required help from your side. Below is my script with description.
#Connecting Outlook with below command
$Outlook = New-Object -ComObject Outlook.Application
# Now getting all folders info in variable (Shows Email, Calendar, Tasks etc)
$OutlookFolders = $Outlook.Session.Folders.Item(1).Folders
#Now connecting Inbox mails
$OutlookInbox = $Outlook.session.GetDefaultFolder(6)
#Now reading latest mail
$latestmail=$OutlookInbox.items | select -last 1
#Now calling email content and getting email content as output in html
$latestmail.HTMLBody
#below is output
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META NAME="Generator" CONTENT="MS Exchange Server version 14.00.0004.000">
<TITLE></TITLE>
</HEAD>
<BODY>

<A HREF="https://test.abc.com/sys/servlet/ViewFormServlet?f
orm=NTE%3aNotifier&server=sm.user&eid=NTS000299462947">https://test.abc.com/sys/servlet/ViewFormServlet?form=NTE%3aNotifier&server=sm.user&eid=NTS4556555
294437</A> 
 
Incident IND000008655308 has been assigned to your group 'Windows
ADMINISTRATION'. 
Company: ABC 
Customer Name: XYZ 
Service Type: Infrastructure Event 
Priority: High 
SLA Resolve Target Status: Within the Service Target 
SLA Response Target Status: 
Reported Source: Systems Management 
******************************************************************* 
Summary: server1.abc.com: Average (5 samples) total cpu is now 100.0
0%, which is above the error t 
 
******************************************************************* 
Notes: server1.abc.com: Average (5 samples) total cpu is now 100.00%
, which is above the error threshold (100%)
</BODY>
</HTML>
# Now my target is to search incident number which is starting from IND* and server name (server1.abc.com). I tried below code but not getting value. Please help me to get these two values from email.
$latestmail.HTMLBody -match "IND"
#Output
True
#but not getting full that is IND000008655308.
Please help me.

Try this:
if($latestmail.HTMLBody -match 'IND(?<x>\d+)\S'){
$value='IND'+$matches['x']
}else{
Write-Host 'Not found'
\_(ツ)_/

Hyper-V Fabric and Fabric Management Cluster

Dear All...........Would appreciate understanding of following:
What is the difference between Fabric Cluster and Fabric Management Cluster?
What virtual machines should be part of Fabric Cluster and Fabric Management Cluster respectively?
Thanks in advance.

It would be helpful if you provided a source from which you pulled those terms. They could mean just about anything without any context.
But I will take a stab at it based upon work I do with the Microsoft Private Cloud Fast Track program. In this reference architecture, a private cloud is being built. To manage the private cloud, a Hyper-V cluster is created and all the System
Center components required to manage the private cloud are installed on this cluster. This cluster is called the Fabric Management Cluster because from it all components of the Fabric, servers, storage, networking, VMs, policies, libraries, etc. are
managed.
Once that Fabric Management Cluster is established, any number of Fabric Clusters can be configured. For example, the Private Cloud could be configured for a business, and multiple business units have virtual systems deployed. The Fabric Management
manager could decide to build one large Fabric Cluster on which to deploy the various business unit machines, or the manager could create separate clouds, each consisting of its own Fabric Cluster. Each separate cloud could be dedicated to the use of
a single business unit.
Again, all conjecture on my part because you have not provided any context.
. : | : . : | : . tim

Remoting with powershell to manage cluster

Similar Messages

Maybe you are looking for