RemotingMessage vs. RemoteObject in AS3 help needed

Hi,
Could someone clarify the difference between using RemotingMessage and RemotObject to invoke RPC in AS3 code? I found two different examples online and I don't know, which one is preferable.
--first example http://www.ghost23.de/blogarchive/2008/10/connecting-flas.html --
var remotingMsg:RemotingMessage = new RemotingMessage();
remotingMsg.operation = "multiply";
remotingMsg.body = methodArguments;
remotingMsg.destination = "calculate";
remotingMsg.headers = {DSEndpoint: "java-amf"};
var respnd:Responder = new Responder(onResult, onFault);
netConnection.call(null, respnd, remotingMsg);
--end of first example--
--second example http://www.flasher.ru/forum/blog.php?b=44 --
amfChannel= new AMFChannel("my-amf", "http://192.168.10.38:8080/samples/messagebroker/amf");
amfChannel.requestTimeout = 3;
amfChannel.connectTimeout = 3;
channelSet = new ChannelSet();
channelSet.addChannel( amfChannel );
amfChannel.addEventListener(ChannelFaultEvent.FAULT, handleChannelFault);
amfChannel.addEventListener(ChannelEvent.CONNECT, handleChannelConnect);
amfChannel.addEventListener(ChannelEvent.DISCONNECT, handleChannelDisconnect);              
ro = new RemoteObject();
ro.destination = "hello";
ro.channelSet = channelSet;
ro.addEventListener(ResultEvent.RESULT, onResult);
ro.addEventListener(FaultEvent.FAULT, onFault);
ro.getOperation("hello").send("Piter2");
--end of second example--
The first one is shorter but it is not clear to me what are the implications of choosing one way over another.
Thanks

If you have a button on the same timeline as your code with
the instance name of abt_mgn_btn, then, when this button is
released, the playback head will jump to frame 10 of the current
timeline and continue to play.
If you want the playback head to jump to that frame and stop
then, either use gotoAndStop(10), or put a stop(); command at frame
10. GotoAndStop() will work more reliably.
Have you gone through the tutorials that come with Flash?
These tutorials may help you to understand the basics of working in
Flash CS3. You may also benefit from a book or two on Flash. Try
"Foundation Flash CS3 for Designers" by Tom Green and David Stiller
from friends of Ed, ISBN 159059861X and/or "Adobe Flash CS3
Professional, Classroom in a Book" from Adobe Press, ISBN
0321499824.

Similar Messages

  • Good morning, AS3 help needed for building my own site in flash

    Good morning to all,
    I am creating a site in Flash, I am using AS3 to create a
    site that stops/starts the movie on my home page and I have a
    series of buttons that play a head (or are supposed to) to the a
    frame for each additional page. Do I need A.S. for each button as
    well? I didn't think I did. The script below is the first one in
    the layer titled actions, this I thought is supposed to stop/start
    the movie at the beginning and the button abt_mgn_btn is supposed
    to bring it to frame 10 to play my about page. ?? at my frame
    number 10 should I put the stop(); script there as well? And at
    every frame break for the next pages? I am hopelessly in need of
    guidance. Thank you to anyone helping me out.
    import flash.events.EventDispatcher;
    import flash.display.MovieClip;
    this.stop();
    function startMovie(event:MouseEvent):void {
    this.gotoAndPlay(10);
    abt_mgn_btn.addEventListener(MouseEvent.click,startMovie);

    If you have a button on the same timeline as your code with
    the instance name of abt_mgn_btn, then, when this button is
    released, the playback head will jump to frame 10 of the current
    timeline and continue to play.
    If you want the playback head to jump to that frame and stop
    then, either use gotoAndStop(10), or put a stop(); command at frame
    10. GotoAndStop() will work more reliably.
    Have you gone through the tutorials that come with Flash?
    These tutorials may help you to understand the basics of working in
    Flash CS3. You may also benefit from a book or two on Flash. Try
    "Foundation Flash CS3 for Designers" by Tom Green and David Stiller
    from friends of Ed, ISBN 159059861X and/or "Adobe Flash CS3
    Professional, Classroom in a Book" from Adobe Press, ISBN
    0321499824.

  • Draw and erase in AS3 help needed

    Hello all
    I have a 200x200 movie clip in a certain position I am trying
    to draw in as3, and then erase it to reveal another clip
    underneath. I am not able to specify the erase brush to be active
    just on top of that clip not on all over the stage.
    Here what I have so far , scratch is the name of my original
    clip I am drawing back
    var bitmap:Bitmap=new Bitmap();
    var bd:BitmapData=new
    BitmapData(scratch.width,scratch.height,true,0x00FFFFFF);
    bd.draw(scratch);
    bitmap.bitmapData=bd;
    addChild(bitmap);
    bitmap.x = 200;
    bitmap.y = 200;
    removeChild(scratch);
    but when I start erasing I have to start from 0,0 to erase my
    bitmap.
    THanks for your help

    Lgeee wrote:
    And how would i go about doing that?By making a proper design.
    This way, I can easily do what the object itself is made to do, without writing alot of code that checks what kind of object was sendt.
    The first way I did this was:
    Psudo Code:
    Object obj = input.readObject();
    String type = obj.getClass().toString();
    if (type.contains("logonObject")) {
    } else if (type.contains("playerObject")) {
    I don't think that's relevant. I don't see where that code uses anything which is specific to the server and to the client. Those class names look like they belong in the server, so that code shouldn't be in a "shared" class. It should be in a "server" class.
    As for the issue of having to tell what kind of object was sent, I'm sure there are better ways than just sending an object and then having the receiver inspect the object to see what kind of object it was.

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Help needed for writing query

    help needed for writing query
    i have the following tables(with data) as mentioned below
    FK*-foregin key (SUBJECTS)
    FK**-foregin key (COMBINATION)
    1)SUBJECTS(table name)     
    SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
    2           02           Computer Science
    3           03           Physics
    4           04           Chemistry
    5           05           Mathematics
    7           07           Commerce
    8           08           Computer Applications
    9           09           Biology
    2)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
    383           S1      9           4           2           3
    384           S2      4           2           5           3
    ---------I actually designed the ABOVE table also like this
    3) a)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
    383           S1
    384           S2
    b)COMBINATION_DET
    COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
    1               383          9
    2               383          4
    3               383          2
    4               383          3
    5               384          4
    6               384          2          
    7               384          5
    8               384          3
    Business rule: a combination consists of a maximum of 4 subjects (must contain)
    and the user is less relevant to a COMB_NAME(name of combinations) but user need
    the subjects contained in combinations
    i need the following output
    COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
    383     S1     Biology Chemistry      Computer Science Physics
    384     S2     Chemistry Computer Science Mathematics Physics
    or even this is enough(what i actually needed)
    COMB_ID     subjects
    383           Biology,Chemistry,Computer Science,Physics
    384           Chemistry,Computer Science,Mathematics,Physics
    you can use any of the COMBINATION table(either (2) or (3))
    and i want to know
    1)which design is good in this case
    (i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
    good method to link with same table but if 4 subjects only(and must) comes
    detail table is not neccessary )
    now i am achieving the result by program-coding in C# after getting the rows from oracle
    i am using oracle 9i (also ODP.NET)
    i want to know how can i get the result in the stored procedure itsef.
    2)how it could be designed in any other way.
    any help/suggestion is welcome
    thanks for your time --Pradeesh

    Well I forgot the table-alias, here now with:
    SELECT C.COMB_ID
    , C.COMB_NAME
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
    FROM COMBINATION C;
    As you need exactly 4 subjects, the columns-solution is just fine I would say.

  • Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

    Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
    But not sure that my lenses will work.
    I have a 170mm/ 500mm APO Sigma.
    A 10/20 ex  Sigma   HSM  IF.
    And a 180 APO Sigma Macro or do I have to scrap them and buy others.
    ALL Help will be greatly received. Yours  BRODIE

    In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
    I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
    Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Help needed! Raid degraded again!

    Hi!
    Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
    What am I doing wrong!
    T: Ekku
    K8N Neo4 Ultra
    AMD 64 4200+
    2 Gb RAM
    2 x 250 Gb HDD (Maxtor)
    nVidia RAID (in mb)
    P.S. I wery SORRY with my poor language!

    I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
    Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
    LPB

  • HELP NEEDED WITH ADDAPTER-DVI TO VGA.

    PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
    ......THIS ENSURES NO SMOKE!!!                                                                                           
    THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
    ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

    Quote from: BOBHIGH on 17-December-05, 09:21:31
    Get over it mate !
    I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
    And why bother to reply...some people have nothing better to do.
    Yes there chep and easy to come by...Ive already got a new one.
    All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
    NO NEED TO A WANKA !!
    I feel a bann comming up.
    Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
    Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
    You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
    Google = your friend.
    Quote from: BOBHIGH on 17-December-05, 09:21:31
    it was a simple question and required a simple answer
    Simple for who ? you (buying a new one) ? me ? we ?   .really...........
    Quote from: Dynamike on 16-December-05, 04:11:48
    1: There are allot of diffrent types of those adapters.
    If any of the mods have a problem about my reply.. please pm me.

  • Help needed for grouping.

    Hi,
        Help needed .
    I have an internal table having 6 .
    Ex :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  10    10
    a     aa    12    p1  20    20
    b     aa    11    p2  30    30
    b     aa    12    p2  40    30
    Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
    To Display :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  30    30.
    b     aa    11    p2  70    60.
    can anyone help me.How to do this..?
    Thanks

    Here you go
    DATA:
      BEGIN OF cur_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(2)     TYPE c,
        f6(2)     TYPE n,
      END OF cur_tab.
    DATA:
      BEGIN OF sum_tab OCCURS 0,
        f1        TYPE c,
        f4(2)     TYPE c,
        f5        TYPE p,
        f6        TYPE p,
      END OF sum_tab.
    DATA:
      BEGIN OF final_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(5)     TYPE c,
        f6(5)     TYPE c,
      END OF final_tab.
    START-OF-SELECTION.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '10'.
      cur_tab-f6 = '10'.
      APPEND cur_tab.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '20'.
      cur_tab-f6 = '20'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '30'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '40'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      LOOP AT cur_tab.
        MOVE-CORRESPONDING cur_tab TO sum_tab.
        COLLECT sum_tab.
      ENDLOOP.
      LOOP AT sum_tab.
        READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                    f4 = sum_tab-f4.
        IF sy-subrc NE 0.
          WRITE:/ 'Something went very wrong'.
          CONTINUE.
        ENDIF.
        MOVE-CORRESPONDING cur_tab TO final_tab.
        MOVE-CORRESPONDING sum_tab TO final_tab.
        APPEND final_tab.
      ENDLOOP.
      LOOP AT final_tab.
        WRITE:/1 final_tab-f1,
              AT 5 final_tab-f2,
              AT 10 final_tab-f3,
              AT 15 final_tab-f4,
              AT 20 final_tab-f5,
              AT 25 final_tab-f6.
      ENDLOOP.
    and the output
    a   aa   11   p1     30   30  
    b   aa   11   p2     70   60  

  • Help needed on installation of Oracle 9i on Sun Solaris 8

    Hey,
    Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
    Simon

    I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
    Edited by: 916438 on Mar 31, 2012 5:55 PM

  • Help needed on installation of Oracle 9i EE on Sun Solaris 8

    Hey,
    Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
    Simon

    I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
    Edited by: 916438 on Mar 31, 2012 5:55 PM

  • Help needed in Finding Download location for Sun One Portal 7

    Hi,
    help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
    http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
    Please share the link for download location.
    I am totally new in Sun ONE Portal.
    Thanks,
    Edited by: 945439 on Oct 5, 2012 3:41 AM

    try edelivery.oracle.com under sun products.

  • Help needed in constructing a tree

    Help needed in constructing a tree. I was wondering if some one can suggest me how to add messages in the second column for both the parent node and child elements.
    I was able to create a tree succefully, but want to add some description in the second column for the first column elements, for both parent and child elements.
    Please suggest me how to add the arrays to second column for parent and child nodes.
    Solved!
    Go to Solution.
    Attachments:
    Tree_fix.vi ‏15 KB

    The Child Text parameter is the one you are searching for. It accepts a 1D string array for the following columns.
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Help needed on CD740 ???

    Help needed on CD740 ? My CD740 is GREAT , well , it was great !!? The sound and general performance are wonderful , but , it now has a fault !!? Shock Horror !!
    What can it be ?!!? Well , the display illumination has failed , as in , there isn't any !!? Have to use a torch to read it !!? Not good. Now , here's the thing , I want a phone number (UK zone) ?to talk to an actual human and I cannot find one !!? That is soooooo annoying !!? The unit is out of warranty so I want to repair this myself , no worries , I once worked for Philips in their pro studio equipment repair workshop so I know my way around black boxes !! I would like a service manual though so that I can get the case apart without damage. So , can anyone help me with a phone number , pretty please ?!!
    Thanx.

    I tried compling servlet, but it is raising error
    that coul not find package javax.servletWhat I did not mention... you need to add those JARs in the Classpath explicitly. You will find them in %TOMCAT_HOME%\common\lib. You atleast need to add servlet-api.jar to your Classpath. :)

  • Help needed with Vista 64 Ultimate

    "Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
    Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
    -The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
    When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
    Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
    once I set this to enabled Dolby and DTS went acti've.
    I also have a question on 5. and Vista 64
    -When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
    Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
    How do I make 5. render properly on vista

    We ended up getting iTunes cleanly uninstalled and were able to re-install without issue.  All is now mostly well.
    Peace...

Maybe you are looking for