Remove Decimals in Smartform not working

Hi,
I use
&struc-field(C)&
to hide decimals in a SF.
The type of this field is LGMNG.
This code works for all instances, except when the UOM is type ROL (Role). I have put a break-point in the SF just before the value is output and they are identical.
But the output would be, for example say five units:
a) 5 SH (Correct)
b) 5,000 ROL (incorrect)
Anyone seen this before?
Thanks.

Nick,
thanks for the reply. I tried both of these already:
&struc-field(.0)&
&struc-field(C.0)&
And, for both, I am told at runtime that (.0) is not a correct "formatting option for the field struc-field".
I'm going to put a code block in to convert to an integer and display that. It will work - I just thought that (C) or (.0) would work too?
Thanks.

Similar Messages

I accidentally downloaded the search engine called Genieo and I am trying to remove it but it just wont go away! I followed the step to remove it but its not working. I am begging for someone's help!!

I accidentally downloaded the search engine called Genieo and I am trying to remove it but it just wont go away! I followed the step to remove it but its not working. I am begging for someone's help!!

See if these instructions work:
http://www.thesafemac.com/arg-genieo/
Ciao.

Iphoto remove photos from iphone not working

For the past couple months iphoto will not delete the photos from my iphone. It successfully imports them, prompts to delete, appears to delete but doesn't actually remove them. They are still on my iphone. iphoto recognizes that they have already been imported and asks to delete them again the next time I plug in my phone, I accept, looks like something is happening but they are still there. I've tried image capture as well and there is no way to delete off the phone in image capture. Help!?

Can it be, that you have enabled iCloud Photo Library (Beta) on your iPhone with iOS 8.1.3? Then you can import photos from the phone, but deleting from Image Capture or iPhoto will not work, if the photos are in iCloud Photo Library.
iCloud Photo Library beta FAQ
Delete the photos directly on the iPhone or using the icloud webpage -
Use the "Photos Beta" app on your iCloud page:
https://www.icloud.com

ADCS Remove child table is not working

Hi
The AD out-of-box adapter ADCS Remove from child table is not working correctly.
when i remove data from child table the task status shows completed, but the description inside the task shows that the GROUP HAS BEEN REMOVED ALREADY FROM TARGET.
But on checking the AD I found the groups were not removed actually.
In the log i found this error
Running Remove User From Group
DEBUG,03 Nov 2009 10:21:06,099,[OIMCP.ADCS],tcUtilADTasks::removeUserFromGroup() Enter
DEBUG,03 Nov 2009 10:21:06,099,[OIMCP.ADCS],tcUtilADTasks::getLookupCodeValue() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcUtilADTasks::getLookupCodeValue() Exit
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcUtilADTasks::getObjectByObjectGUID() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::search() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::getPath() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::getPath() Exit
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::connectToAvailableAD() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForDirContext() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForDirContext() Exit
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForLDAPContext() Enter
DEBUG,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForLDAPContext() Exit
INFO,03 Nov 2009 10:21:06,115,[OIMCP.ADCS],SSL option is not selected in ITResource
DEBUG,03 Nov 2009 10:21:06,131,[OIMCP.ADCS],tcADUtilLDAPController::connectToAvailableAD() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::disconnect() Enter
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::disconnect() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::search() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcUtilADTasks::getObjectByObjectGUID() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::getPath() Enter
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::getPath() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::connectToAvailableAD() Enter
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForDirContext() Enter
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForDirContext() Exit
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForLDAPContext() Enter
DEBUG,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],tcADUtilLDAPController::hashTableEnvForLDAPContext() Exit
INFO,03 Nov 2009 10:21:06,334,[OIMCP.ADCS],SSL option is not selected in ITResource
DEBUG,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],tcADUtilLDAPController::connectToAvailableAD() Exit
DEBUG,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],tcADUtilLDAPController::modifyAttributes() Enter
*ERROR,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],The error occured in tcADUtilLDAPController::modifyAttributes():null*
DEBUG,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],tcADUtilLDAPController::disconnect() Enter
DEBUG,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],tcADUtilLDAPController::disconnect() Exit
DEBUG,03 Nov 2009 10:21:06,349,[OIMCP.ADCS],tcUtilADTasks::removeUserFromGroup() Exit
Any thoughts would be grateful
TIA,
Manoj

Hi Manoj,
The error message below is performed when the connector tried to remove the user from a user group removeUserFromGroup() (ADCS Remove User From Group), so the user group will not be removed. To delete a group, you have to run the delete group task of AD Group process.
When the user has already been removed from the group, the connectors shows null to the tcADUtilLDAPController::modifyAttributes():null
Renato.

Removing _root code does not work

I've tried removing or using this and code dose not work. Any help is appreciated.
var j:Number;
for (j = 0; j < 7; j++) {
_root["holder_mc"+j].onPress = function() {
with(this){
    startDrag(false);
       lineStyle(3,0xcccccc,100);
      lineTo(_root.myWidth,0);
       lineTo(_root.myWidth,_root.myHeight);
       lineTo(0,_root.myHeight);
       lineTo(0,0);

I used:
eval("holder_mc"+j).onPress = function()

Remove decimals in smartforms

Hello all,
How can we suppress decimals in smartform. Because I do not want it for a Quantity field.
Thanks.

Hi
&symbol(Z)& Omit Leading Zeros
&symbol(S)& Omit Leading Sign
&symbol(<)& Display Leading Sign to the Left
&symbol(>)& Display Leading Sign to the Right
&symbol(C)& Compress Spaces
&symbol(.N)& Display upto N decimal places
&symbol(T)& Omit thousands separator
&symbol(R)& Right justified
&symbol(I)& Suppress output of the initial value
Regards
Pavan

Dunning Smartforms not working

Help please...
                                                                                Form ZFSCD_DUNNING_TG language EN is not available in client 220
Message no. TD131
Diagnosis
You want to display a form which does not exist.
System Response
If the form does not exist in the specified language in the current
     client, the form which was used for printing is displayed by accessing
     another client. The search is thus graded as follows:
-   Current client, form in specified language, status irrelevant
-   Current client, form in original language, status active
-   Client '000', form in specified language, status active
-   Client '000', form in original language, status active
Procedure
You can obtain a list of the form available in the current client using
     the function 'Find' in the initial screen of the form maintenance. Here
     you can also output a list of the forms in your current client or
     another client, using the menu option 'Utilities -> Client comparison'.
Did this but still not working
After executing F150 it is not printing dunning letter as it showing
Forms for MAHNR: 'TG', RBUKM: '2200', KOART: 'D' do not exist (T047E)
Thanks

Hi Hiren,
Ref.Dunning Procedure for Texts should have a value equal to your custom dunning procedure which you have created or you may enter 0001, 0003 or 0005 if you are using any of the standard dunning procedures.
This should solve or problem. Please do let us know if you find something else.
Regards
Harpreet

Remove Decimals in smartform for QUAN Field

Hi,
I want to display the Quantity field in smartform by Suppressing Decimals,
if i give &field(13.0)& it is showing Error : Incorrect formatting option.
The Same will work with CURR Field. Then what i have to give for QUAN Field.
Thanks & Regards
Praveen.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Mar 24, 2009 10:42 AM

Hi Praveen,
Maybe you can try it with &field(.0)& ,
But it is possible that it is concerning a field which formatting is customized with transaction CUNI.
Hope this will help.
Gr.,Frank

Smartform not working for languages other than EL (english) !

I have a scenario of producing a pdf form(smartform) by clicking on a button in PC-UI portal .
Whenever i tried generating the pdf form (smartform) in any diff. language rather than english by logging in PCUI portal in that language , i found the following:
In the code, generated by the smartform, there is a function call to function ssfcomp_process_document.
It returns sy-subrc 1 and the error is FORMATTING_ERROR. , whenver other 4 languages are used instead of english .
Can anyone help? suggest possible reasons for this ?
Thanks a lot,
Piyush

Hi
I think you need to first translate the smartform into other languages. Before translation, it wont work.
Steps for translation:
1. goto Transaction SE63
2. in R3 Enterprise select form menu
Translation - ABAP Objects - Other long texts
3. select FS - SSF-Smart Form
4. Object Name: choose your smart form
5. select target language
6. press edit
Regards,
Vishwa.

Smartform not working in PCUI

Hi experts,
I'm facing this issue:
I created a Z* form for opp print, it works perfectly fine in GUI, but cannot open in PCUI.
There's an error like this: "An error exists on this page. Acrobat may not display the page correctly".
Any suggestion on this?
Thanks a lot

Hi Bhargava,
I would suggest you to place a breakpoint at class- CL_CRM_BSP_IL method-READ and see if MAC is sending the et_screen_structure correctly filled in. MAC may not be sending the data to PCUI framework correctly. If it's , write further.
I hope it helps.
Thanks,
Gyan.

Remove All Website Data Not Working

Hello All,
I am currently using a MacBook Pro, running OS X 10.8.5 with Safari ver 6.2.2. Recently I have noticed that when I go to preferences and click on Remove All Website Data it does not clean out the sites I have visited. Is this a common problem or do I have a virus or is there a fix? Please help. Thank you for your time.

If you want to delete only the browsing history and keep all other data, select Show History from the History menu. In the window that opens, select all the history items and press delete.

Command in Smartform not working

Hi all,
I need to print totals in every page, for that how to know the end of the page.
i tried to print only 15 rows in page and set a flag, if flag = X then im printing total in footer.
But in some instances, the page has more than 15 rows then after 15th row the total is printing then the
remaining records are printing. Now i called the Command with flag = X and in goto new page i gave second page.
But the flag has set to X, total is also printing but the command is not trigerring.
after 15th record the total is getting displayed and remaining item are printing.
anybody has a clue on this why the command is not trigerring?
pls suggest.
Regards,
Priya

Declare your total line in Footer of table. There you will have the option to display it at end of table or end of each page.
No need to calculate 15 lines or so.
Just keep calculating the total in a variable and display it in footer.
Double click on Footer node of table and you will see the optin to display it 'At page break' or 'End of table'
Revert if in any doubt.
Edited by: Ankesh Saharan on Dec 24, 2008 2:19 PM

Page protection in smartform not working

Dear All,
I have a smartform with one page. For a range of order numbers multiple pages would come in output. Example : 5 order numbers , 5 page output. There is a header part, that has to come on each page which is hard coded i.e company name .
when we give small range of order number ,output comes perfect. But when range is over ten. the header part moves for some pages into previous page...........

Hi Shiva,
I am using only one page. In it I am using loop to display all content.
Pattern of each page is:
                                                                Company Name
doc no.      123456                                       code:456                                  city:nnnnnnnnnnnnnnn
table with 4 cols.
footer part. of table
pm sign                                     authority sign                                                  reviewer sign
So, when there are more then three pages, the last line in smartform goes in to next pages .Due to which other pages indentation also goes wrong. This is happening when table size is increasing more then it is in first page.
Please Help.........

Automatic removal of previous backups not working

retention policy is window of 7 days
Sat:
crosscheck backup
report need backup
delete obsolete
backup incremental level 0 database
backup archivelog all delete input all
Sun-Fri:
crosscheck backup
report need backup
delete obsolete
backup incremental level 1 cumulative
backup archivelog all delete input all
Here is what is in the backup directory
incremental level 0 & acrchivelogs : Feb 25
incremental level 1 & acrchivelogs : Feb 26
incremental level 0 & acrchivelogs : Mar 4
incremental level 1 & acrchivelogs : Mar 5
Shouldn't everything before Mar 4 have been deleted by "delete obsolete"? I thought I understood RMAN but apparently not. Please help.

Hi
That you continue to have a full backup of Feb. 25 is correct. Retention policy set to 7 days means that you should be able to restore till 7 days ago; to do that you need a backup older than 7 days.
Your output is correct!
Bye, Aron

Remove Element does not work

Hi Experts,
I want to loop over a node and remove all elements in this node if they don't match a certain pattern (which needs to be checked by getting the details o these elements).
So looping over the node and checking whether the pattern matches works pretty fine (I've checked by using a counter variable which counts the number of matches and compares to the total size of the node). But removing the elements does not work.
I always get the complete table as the result but not without all those elements I that they'd be removed already. I also check the success status (boolean) of the remove function and it delivers always "true" so it seems to work.
This is the relevant coding:
       for(int c = 0 ; c < wdContext.nodeMatnrlist().size() ; c++){
          wdContext.nodeMatnrlist().moveTo(c);
          GetMaterialDetails(wdContext.currentMatnrlistElement().getMaterial());
          if(!wdContext.currentMaterialDetailsElement().modelObject()
.getOutput().getMaterial_General_Data().getCreated_By().equals("BAIV-SS09-21")){
               success = wdContext.nodeMatnrlist().removeElement(wdContext.nodeMatnrlist().getCurrentElement());
               counter++;
any Ideas on this?
Many thanks in advance!
Cheers
Tobias
Edited by: Tobias Fickinger on Sep 4, 2009 7:04 PM

Hi Tobias.
Try this instead:
wdContext.nodeMatnrlist().invalidate();
Regards.
Julio Herrera

Remove Decimals in Smartform not working

Similar Messages

Maybe you are looking for