Remove / Hide CUP Custom Field

GRC Experts,
I am wondering. Ho
w can I modify, hide, or delete a custom field that has been a part of our request workflow in production. We get the error: "Updating custom field to non-workflow field failed because it has been used as a workflow field".
I havenu2019t tested but if I close all requests in the workflow and archive does anyone know if it will work?
Thanks,
Kyle

Hi Kyle,
I faced a similar issue when I tried to change the "company ID" under CUP-> Configuration ->Roles->Attributes->Company.
In this case, this field is not modifiable, so I decided to delete it and create a new one. But when I tried to delete the old company, I couldn't do it because this value was used in requests. Then, I canceled the open requests, archive and delete all the corresponding request and after that I was able to delete the company and to create a new one.
Please, note this (config guide):
"Archiving Requests is a way to view only the current periodu2019s requests during normal viewing.
All requests for access are stored in the Compliant User Provisioning database. The system closes the requests after they are approved or rejected. The Archiving Requests functionality
helps you archive the closed requests. The archived requests remain in the database but are not visible when the users run searches or reports."
After I performed the archiving I tried to delete the company name again, but I couldn't until I deleted the request. Note that you have the option to download the request before delete them.
Here you'll also find a thread regarding another problem deleting fields: Re: CUP - Cannot delete since referred in request data header
Perhaps if you contact SAP Support they can give you a better option. The option to download and save the request before deleting them was OK in my case but maybe it isn't a nice option for your situation. If you open a support message to SAP, please let us know if they suggest you another option...I'm looking forward to know it
Cheers,
Diego.

Similar Messages

  • CUP - custom field and match code

    Hi,
    is it possible to have a custom field in CUP with a match code to help searching ?
    the only two way that i found are dropdown lists for a table from a backend system and free field ( varchar, date, numeric)
    thanks
    Regards
    Aurelien

    Hi Aurelien,
    You can create custom fields in CUP for the following types.
    1  Text type
    2 Numeric type
    3 Date type
    4 Drop down
       a) drop down data define in CUP
       b) Drop down data coming from backend table.
    If you want a request to be associated with a match code that helps you seaching the request later.
    Than create an text type custom field and use in a workflow.
    While a creating the request define the value of custom field.
    Now you can serch request on the basis of the value define in the custom field.
    Kind Regards,
    Srinivasan

  • How to hide custom fields in Shopping cart depening on user role

    Hi,
    We have some custom fields in shopping cart for basic view. Every thing works fine. Now client is asking to hide all the custom fields based on user role.
    I found some function module to fund roles. now my main problem is unable to find the cusotm filed screen field name.
    When I tryed to find the screen field name using BBPSC02/03, its giving 'GT_DISPLAY_100-FIELD'. If I try to use this field, its not working.
    Could you pls tell me how to find custom screen filed name to hide in shopping cart.
    Thanks,
    Ram

    Hi Ram,
    As Laurent suggested,to hide the custom fields based on the user role,you need to implement the logic in BADi "BBP_CUF_BADI_2".
    You have the importing parameter IV_USER in this BADI.
    Pass this parameter to tables AGR_USERS and AGR_USERT  to get the user role
    OR
    Use FM: BAPI_USER_GET_DETAIL
    with USERNAME= user id and can retrieve Table: ACTIVITYGROUPS Field:AGR_NAME
    if you want the otherway around
    you can also use FM: RSRA_USERS_OF_AGR_GET
    with I_AGR_NAME= role and you can retieve Table: ACTIVITY_GROUPS_USERS Field: UNAME(usr Id)
    Then check the value for the User role as obtained using the above steps and accordingly set the property for the custom fields to hide them.
    BR,
    Deepti.

  • Hide custom fields in checklist item depending on checklist type

    Hi,
    My requirement is that I want to hide some custom fields on a checklistitem depending on a checklist type.
    Can this be done at configuration or programming level?
    How can it be done?
    Thanks

    HI hemant vaidya ,
    It may be possible to realize it via cProject field control functionality. You can define the condition using a so called schemata,   and set the visible depend on the condition.
    More details see note 947936
    especially the section 'Create and use customer-specific conditions '
    Kind regards,
    Zhenbo

  • Adding custom fields to DB table

    Hi,
    I added custom fields in std DB table using CI_* , activated table using SE14. Now I want to remove the added custom fields , I deleted the CI_* using SE11. It still appears in DB table,  I mean I dont expect to disappear from DB table, when I double click it still takes to structure screen. I deleted include from SE80 also selecting Package, activated and adjusted DB table from SE14 after deletion, but it still appears and when I check the attributes it shows the same package , how to reset the CI_* , bottom line ,I want to make DB table normal as before, because of that I am getting dumps when I execute std DB table related T codes.
    It should be done in easy way but not able to get breakthrough.
    Please let me know your suggestions.
    Thanks

    Hi Sai,
    Try to assign the CI_* structure to $temp,i.e as local object and then activate it first.
    After that, try deleting the local object and adjust the table using SE14.
    If still it does not work, ask your BASIS consultant to do an "Alter table".
    May be that works!
    Thanks & Regards,
    Anshumita.

  • GRC CUP - How to add a custom field in "Select Roles/Groups" form

    Hi Forum,
    I created a custom field "REGION" in CUP configuration. I used this field in "Role Attributes"
    In "New Account" workflow, when i click on Select Roles/Groups" a screen for Select Roles/Groups will display to select the roles by different combinations.
    I need this "REGION" field in the above selection creria to select roles by REGION.
    How to make this field "REGION" appear in above selet cretiria.
    Thanks,
    RAM
    Edited by: Ram.Sathish on Apr 21, 2011 3:46 PM

    you can not add custom fields in the search, have you thought about using the company field as the fied for location?
    Regards,
    Chinmaya

  • Custom Fields in GRC 10.0 - CUP

    Dear Experts,
    Please help me in creating Custom fields in GRC 10 - ARM (CUP). I want to create Custom field called Country and assign approvers to that field and Make user of this field in user request form as mandatory field.
    Could you please let me know how to create custom field and assign approvers to the same and make the same mandatory while user is create a request for new account in the sytem.
    I appreciate your help.
    Thanks,
    Raj

    Hello Raj
    As per my knowledge we can create custom fields in SPRO, path is
    IMG>GRC>General settings>User defined fileds
    under this you will get two types
    1.NON HR defined fields
    2.HR Defined filds
    Baithi

  • Moving Custom fields to the main screen in CUP

    Hi Gurus,
    I am wondering if there is a way to move a custom field to the main screen like under general information instead of it being in the more section. We have a custom field which would be mandatory, So it would be nice to have it on the main screen.
    Thanks,
    Chinmaya
    Edited by: chinmaya prakash on Nov 3, 2010 6:38 PM

    Hi,
      There is no way to achieve this. As per the desgin, CUP adds all the standard field to main screen and custom fields under more section.
    Alpesh

  • Remove custom field instead of default text field

    I need  migrate to SharePint 2013 from 2007.
    In SharePoint 2007 List include a custom field.
    Dont use the custom field again,
    I want remove custom field instead of default text field (remain metadata).
    How to do it ?
    Thanks

    Hi ,
    According to your description, my understanding is that you want to migrate SharePoint from 2007 to 2013 with managed metadata column. Is it right?
    If you need to migrate managed metadata columns, you also need to migrate the Managed Metadata Service application. however, when you use this method, only global terms are available but the local terms  are not available.
    So, if you used the local terms for the managed metadata column, I suggest you use a third party tool or manually re-create the column in the destination list.
    There are some articles about migrating managed columns, please take a look at:
    http://sharepointconnoisseur.blogspot.jp/2012/06/migrate-sharepoint-2010-content-with.html
    http://www.metalogix.com/help/Content%20Matrix%20Console/SharePoint%20Edition/002_HowTo/003_MigrationActions/011_CopyTaxonomy.htm
    http://www.quest.com/tv/All-Videos/1749994742001/Migrating-to-SharePoint-Managed-Metadata-Columns-with-Migration-Suite-for-SharePoint/Video/
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • CUP 5.3 SP8 - Custom Fields - Default Value?

    Hello,
    Can I set a Default Value for a Custom Field? For example, we have the Custom Field for requets called "Country." Can I default this so when a user logs in to create a request, it defaults to "North America." ?
    I'm looking through the Config Guide and not seeing anything on this. Custom Fields don't show up in End User Personalization either...
    Thanks!
    Jes Behrens

    Jes,
        Harleen is correct. This is no available in AC (CUP) right now. Hopefully, SAP fixes this soon. Can you open a message with SAP and see if they are going to fix this or not?
    Regards,
    Alpesh

  • Error in BSEG partially active after removing the custom field CI_COBL in ECC 6.0

    Hello SAP Gurus,
    I added one custom field in CI_COBL and activated ,the all the connected DB tables like BSEG etc activated successfully. But after that I deleted the field from CI_COBL but the BSEG and CI_COBL could not be activated. It is still in partially active .
    Please suggest how to resolve this issue. Its very urgent.
    Thanks in advance
    Regards,
    HP

    Hi,
    I hope you are going to do in Development system then check any errors in SE11.
    if its fine then got to SE14
    Check the status whether    Active or partially active
    if its other then Active, you may get help from BASIS team or yourself can do it in SE14
    Click the button 'Activate and adjust database' please ensure that the radio button save data should be selected and which is default or else the entire DB records will be deleted along with DB table activate.
    In development you can choose processing type as Direct/Background.
    Please post if you have further query.
    Regards,
    Vadamalai A

  • WDA Leave Request -- Hide Customer Field in Confirmation Popup

    Hello folks,
    System Information:
    NW AS 7.03 ABAP Stack 731 Level 11, ECC 606 (EHP 6) with SAP_HR 604 Level 73 and EA_HR 607 (HR-Renewal 1) Level 24
    Background:
    For Our WDA Leave Request application, our special department has requested to provide certain additional fields for particular Leave Types, all in all these are three check boxes and one Link-To-URL-UI. I have created these fields, or rather configured them via IMG Customizing Tables V_PT_FIELD_SEL / V_PT_FIELD_SEL_C, using the ten standard customer fields provided by SAP CUSTOMER01 - CUSTOMER10.
    After making the subsequential customizing configurations, I have enhanced the WDA OVP-FPM CC "HRESS_CC_GUIBBF_LEAVREQ" to change the respective fields' UI-Type from "Inputfield" to "Checkboxgroup" and "LinkToAction". So far so good; it's nothing fancy and everything works out the way it should.
    Problem:
    Our special department has recently noted, that the Link-To-Action provided is also taken into account by the Confirmation Dialogue Popup-Box and correctly set read-only like any other field as well. However, the fact that this read-only-link is then also shown in the Popup-Box is confusing to some users and should therefore be hidden. My plan was to enhance the WDA OVP-FPM CC "HRESS_CC_GUIBBF_LEAVREQDIALOG" and simply set the field CUSTOMER01(that's the one field I use for the Link-To-Action-UI) invisible and that's exactly what I did. But look what the effect is:
    You can see behind the lightbox in the Form, how the field is usually displayed in the Form-UIBB. What I "achieved" now, though, is, that only the lable is hidden in the Popup-Box through my enhancement in "HRESS_CC_GUIBBF_LEAVREQDIALOG" and the LinkText is still visible.
    What I did so far / Question:
    So... I went ahead and debugged the feeder class CL_HRESS_PTARQ_LEAVREQ_GUIBBF. I found out that in the Methods "FIELDS_SHOW_HIDE_CLEAR" and "FIELD_SETTING_BY_CUSTOMIZING" I would theoretically be able to manipulate the visibility, but:
    This would mean I'd have to create overwrite-exits, which I would like to avoid, because maintenance is a pain.
    Manipulating the process flow here probably has side effects on the field control of the overall application which must not happen. If I'm extremely unlucky it might even effect the data flow.
    This brings me to my ultimate question: How do I make a field from this Confirmation Dialogue Popupbox cleanly disappear/invisible in a super-duper-elegant way without using a sledgehammer? Maybe there is a customizing-way I have overlooked so far? (please?)
    Cheers, Lukas

    Hi Samuli/Yugandhar,
    what you suggest is exactly what I did:
    My plan was to enhance the WDA OVP-FPM CC "HRESS_CC_GUIBBF_LEAVREQDIALOG" and simply set the field CUSTOMER01(that's the one field I use for the Link-To-Action-UI) invisible and that's exactly what I did.
    The only derivation from your suggestions is that I didn't make a deep copy but an enhancement instead, which Creates a delegation Object that automatically inherits from the standard CC. Technically a copy or an enhancement do exactly the same but maintenance is a lot smoother for enhancements, that's why.
    Cheers, Lukas
    P.S. @ Yugandhar, nice to see you are still around! Indeed I'm primarily occupied with the module FI-TV, that's why I'm only wandering around the ESS/MSS subforums now and then.
    Message was edited by: Lukas Weigelt

  • CUP 5.3 Autoprovisioning from Custom Field

    Experts,
    I have a situation where we are connecting LDAP for authentication but the LDAP system does not contain User ID. Therefore, the access request will need to be accepted by Security prior to auto-provisioning to ensure naming convention standards are followed.
    Since the User ID field becomes unmodifiable once the request is submitted, is there an option to autoprovision off a custom field since these are modifiable after a request is submitted?
    Thanks so much,
    Grace Rae

    If you do not have HR then you may not consider automatic HR triggers for role provisioning as part of your scope.
    However, I would pay attention to the validity dates which you assign to the roles as these will be transferred to the backend system.
    I understand that statement to say that it is possible to have a delimit period that can be used to allow for roles to be automatically delimited.

  • Hide customer fields

    Hi all,
    I am new in programming Badi's. Does anybody got an example code for hiding customer fields in a shopping cart?
    I know i need to use badi: BBP_CUF_BADI_2, method "modify screen".
    My customer field is "ztempleet" and is maintaint as a component in structure BBP_PDS_SC_ITEM_ICU.
    Regards
    Jordi

    Hi Jordi,
    Here is the sample code :
    CASE lf_doc_type.
    WHEN 'object_type'
    LOOP AT et_fields INTO ls_fields.
              IF ls_fields-fieldname = 'ztempleet'
                ls_fields-xinput = ' '.
                ls_fields-xdisplay = ' '.
                MODIFY et_fields FROM ls_fields TRANSPORTING xinput xdisplay.
              ENDIF.
    ENDLOOP.
    ENDCASE.
    Thanks,
    Pradeep.

  • Remove/Hide the text in S3 View of HCM_TS_APV

    Hi Folks,
    Client requirement is they wanted to remove the Overtime hours and text, here am attaching pics to give a clear idea.
    Actual App Functionality:
    Client Requirement:
    Kindly suggest me how to remove/hide the Overtime entries.
    Regards,
    Kiran.

    Hello
    I think you have to remove the following code from view view/S3.view.xml, that belongs to BSP Application HCM_TS_APV:
    <Label
                                             class="tsaOvertime"
                                             text="{path:'DetailModel>Overtime', formatter:'hcm.mgr.approve.timesheet.utility.Parser.parseOverTime'}"></Label>
    In order to remove fields from a Fiori app, there are a lot of documents in the web, that you can find by performing a Google search. For me, the best one is this one:
    How to Guide: SAP Fiori Extensibility - Addind Custom Fields in UI
    Once in the guide, go to page 9, where you will find a clear explanation of what you need to do.
    Regards
    Joaquin

Maybe you are looking for