Remove JMS headerinformation from file one queue

Hi.
I have a problem regarding the MQ-series JMS adapter.
When writing the file the JMS adaptor puts in some additional tags.
Usually I would have MQ series get-program to strip these garbage info, but in this case im sending to an Amtrix XIB which has its own internal MQ-get.
There must be some way for XI's JMS adaptor to " is junk that I really dont need in the file.
How can you setup the JMS adaptor not to put in these information?

The source code is from a Yahoo Movie listing (http://uk.movies.yahoo.com/)
Most of the code is removed but there's still bits left over from Javascripts & images, I think.

Similar Messages

  • How do I remove a Movie from the download queue?

    I accidently selected the *wrong movie* and didn't catch it until it started to download. I contacted iTunes, reported the problem and they gave me a refund but, and +this is why I'm asking for help+, every time I got to iTunes, the movie starts downloading again.
    How do I actually remove this movie from *my downloads* queue?
    -PS: How do I determine which Mac OS I have?-

    The only way I know to get rid of the movie is to let it download and then delete it.
    To tell what version you have, click the Apple (upper right corner), then click "About this Mac".

  • Remove UWL Action from just one item type

    I would like to remove the "forward" action from only one item type in the UWL.  There is the ability to remove an action from all items in a particular iView using "List of UWL Actions to exclude", however, I can not find out how, or if it is possible to exclude a UWL action in the XML configuration file for just one item type.  We are on NWO4s sp 05.  Does anyone know if this can be done and what the xml snippet would look like that would remove the "forward" action from a single item type?
    Regards,
    Stephanie.

    Kiran,
    The xml snippet you sent does remove the "forward" action from the UWL preview iView, but it does not remove the action from the list view.  To the right of every item in the list view is the "properties" icon (unclear on the actual name of this icon - the one that has 3 small lines and a triangle).  When this is clicked the "forward" option still appears.  I am looking for a way to totally disable the forward option on the defaultView, but only for certain item types.
    Regards,
    Stephanie.

  • Reading from file one at a time

    I am trying to read from an Excel file one cell at a time, and am having some trouble. I have included my VI. Any help would be greatly appreciated.
    Attachments:
    demo.vi ‏165 KB

    Your first problem is that you are using the Read file function. This doesn't work with Excel. Native Excel files have their own special format and you have to use ActiveX to read them. If you have the report generation toolkit, you can use that or look at the examples on the Excel Board. You can also save the Excel file as comma or tab separated text and then the Read From Spreadsheet or Read File will work.
    Second, if the file is static, you would be much better off to read the file all at once to an array and then just index out the values inside the while loop. It looks like you are getting temperature values from a file. Is the Excel file being generated at the same time as your program? If it is, what is generating the file? Maybe that program can be controlled by LabVIEW and you can get the temp values directly from it. If it's a file that is constantly being updated, then the reading is going to be somewhat comlpicated if you care at all about getting the most recent value.

  • Remove address bar from file explorer (using regsitry)

    This used to be possible in 2008, but I haven't been able to figure out how it's done in 2012 R2. The old method was to add a key under IE, and it would also remove the address bar from windows explorer - but this method
    no longer works. So is anybody aware of what key needs to be changed or modified in order to make this happen. Further, ideally this change would happen in HKCU.
    Thanks

    Hi,
    >>That would seem to remove run from start menu, not the address bar from file explorer.
    Yes, this setting will disable Run.exe. However, this setting will also prevent users from accessing local or network resources by typing the accessing paths in the address bar of File Explorer.
    I am not completely sure why you want to remove the address bar in File Explorer. However, if our target is to restrict users from accessing network resources by UNC path, in my opinion, enabling this setting a better way to go.
    In addition, regarding this topic, the following thread can also be referred to for more information.
    Hide Windows Explorer Address Bar
    http://social.technet.microsoft.com/Forums/en-US/987305c6-bd48-4107-bcf5-84d4fff4097d/hide-windows-explorer-address-bar?forum=winserverGP
    Best regards,
    Frank Shen

  • Removing "LineFeed" character from file

    Hi,
    I have a scenario where I need to develop an EJB session bean business method which will take a file (inputstream) as input.
    The methods should remove all "LineFeed" characters in this file and return new file (inputstream).
    How do I achieve this? How do I remove line feeds from inputstream?
    Thanks and regards,
    Amey

    This is how its done:-
    import java.io.*;
    public class RemoveLineFeed{
         private static final String BLANK = "";
         private static final String NEWLINE = "\n";
         private static final String CARR_RET_NEWLINE = "\\r|\\n";
         private static final String LINE_SEPARATOR = "line.separator";
         public static void main(String[] args){
              InputStream l_returnStream = null;
              String l_inputStreamAsString = null;
              byte[] byteArray = null;
              try{
                   //1. InputStream to String
                   FileInputStream fileInputStream = new FileInputStream ("997AND824-TESTFILE_WithLF");
                   DataInputStream dis = new DataInputStream(fileInputStream);
                   int arraySize = fileInputStream.available();
                   byteArray = new byte[arraySize];
                   dis.readFully(byteArray);
                   l_inputStreamAsString = new String(byteArray);
                   //2. Carry out replace
                   //l_inputStreamAsString = l_inputStreamAsString.replaceAll(NEWLINE, BLANK);
                   //l_inputStreamAsString = l_inputStreamAsString.replaceAll(System.getProperty(LINE_SEPARATOR), BLANK);
                   l_inputStreamAsString = l_inputStreamAsString.replaceAll(CARR_RET_NEWLINE, BLANK);
                   //3. Convert String back into InputStream
                   //l_returnStream = new ByteArrayInputStream(l_inputStreamAsString.getBytes());
                   //4. Create new file
                   File l_outFile = new File("997AND824-TESTFILE_WithOutLF");
                   FileWriter fileWriter = new FileWriter(l_outFile, true);
                   fileWriter.write(l_inputStreamAsString);
                   fileWriter.close();
              catch (IOException ioe) {
                   System.out.println(ioe.toString());
              catch (Exception e) {
                   System.out.println(e.toString());

  • Remove LF characters from file names

    I have a folder full of files with filenames that contain LF character (ASCII code 10).  I want to use Automator's "Replace Text" funcion to remove these non printing characters from file names.  Is there a way to do it?
    If automator is not able to do this task, I will take a bash script or applescript solution as well...

    Take a look at: http://stackoverflow.com/questions/4417588/sed-command-to-fix-filenames-in-a-dir ectory
    (I changed  tr -d "\r\n" to tr -d "\n", but try both)
    for f in ~/Desktop/*
    do
        new="$(printf %s "$f" | tr -d "\n")"
        if [ "$f" != "$new" ]; then
            mv "$f" "$new"
        fi
    done

  • Removal of TABS from File Upload

    Hi all,
    I made an upload of a local file with TAB spaces in an internal table .I am required to remove the TABs from the records.I tried to used command REPLACE '/h' by single space, where '/h' being the TAB , but it did not work.
    How can I achieve the requirement?
    Your ideas are appreciated
    Thanks,
    stock

    first you wil call GUI_UPLOAD in normal way.
    <b>if you are in UNICODE system,</b>
    CLASS CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
    CONSTANTS: X_DELIM  TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
    this X_DELIM is to store HORIZANTAL TAB value.
    <b>if you are in a NON UNICODE SYSTEM,</b>
    you can use,
    data X_DELIM type x value '09'.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                = V_FNAME
          FILETYPE                = 'ASC'
        TABLES
          DATA_TAB                = IT_READFILE
        EXCEPTIONS
          FILE_OPEN_ERROR         = 1
          FILE_READ_ERROR         = 2
          NO_BATCH                = 3
          GUI_REFUSE_FILETRANSFER = 4
          INVALID_TYPE            = 5
          NO_AUTHORITY            = 6
          UNKNOWN_ERROR           = 7
          BAD_DATA_FORMAT         = 8
          HEADER_NOT_ALLOWED      = 9
          SEPARATOR_NOT_ALLOWED   = 10
          HEADER_TOO_LONG         = 11
          UNKNOWN_DP_ERROR        = 12
          ACCESS_DENIED           = 13
          DP_OUT_OF_MEMORY        = 14
          DISK_FULL               = 15
          DP_TIMEOUT              = 16
          OTHERS                  = 17.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        EXIT.
      ENDIF.
    *--Delete any Empty lines in the input file,if any
      DELETE IT_READFILE WHERE LINE IS INITIAL.
      LOOP AT IT_READFILE INTO X_READFILE.
        SPLIT X_READFILE-LINE AT X_DELIM
                            INTO  X_INPUTFILE-F1
                                 X_INPUTFILE-F2
                                X_INPUTFILE-F3.
        APPEND X_INPUTFILE TO IT_INPUTFILE.
        CLEAR X_INPUTFILE.
      ENDLOOP.
    HERE IT_INPUTFILE IS the internal table with your fields.
    IT_READFILE IS a character type internal table
    data : BEGIN OF IT_READFILE occurs 0,
              LINE(1000) TYPE C,
            END OF IT_READFILE.
    or you can put HAS_FIELD_SEPERATOR = 'X' in calling the above function module.
    Regards
    Srikanth
    Message was edited by: Srikanth Kidambi

  • Remove html code from file

    I'm trying to figure out how to remove all the html code from a file.
    I've got an AppleScript but it doesn't remove all the code
    <code>
    on run {}
    copy (choose file with prompt "Remove markup from which file:") to the_file
    promptuser(thefile)
    end run
    on open (the_file)
    if length of the_file > 1 then
    display dialog "Please drop only one file on me at a time."
    else
    promptuser(thefile)
    end if
    end open
    on promptuser(afile)
    copy (read a_file) to message_text
    copy (open for access file ((path to desktop as text) & "Markup Removed") with write permission) to newfileID
    write removemarkup(messagetext) starting at eof to newfileID
    close access newfileID
    end prompt_user
    on removemarkup(thistext)
    set copy_flag to true
    set the clean_text to ""
    repeat with this_char in this_text
    set this_char to the contents of this_char
    if this_char is "<" then
    set the copy_flag to true
    else if the copy_flag is true then
    set the clean_text to the clean_text & this_char as string
    end if
    end repeat
    return the clean_text
    end remove_markup
    </code>

    The source code is from a Yahoo Movie listing (http://uk.movies.yahoo.com/)
    Most of the code is removed but there's still bits left over from Javascripts & images, I think.

  • UDF - Removing Header Record from File

    Hi Team,
    In my file(File Content Conversion) to ABAP server proxy scenario...
    The source File structure is like this...
    KUNNR|Matnr|Description----->(This is Hearder Record.Each File contains this header record.)
    1001|0077321|Special Materials
    1002|0077323|Raw Material
    File adapter will picks the file , In Message Mapping The first record is the Header Record from the above file structure.So I need to remove the Header Record.
    Can we handle  this requirement with any FCC parameter ;I think we can do it with the help of UDF in MessageMapping?
    Can anybody ghelp me the sample code for this.
    Thanks.
    Drumi

    Hi,
    You can use Document Offset in FCC to  specify the number of lines that are to be ignored at the beginning of the document.
    Regards,
    Priyanka

  • Do I really still have to remove all spaces from file names?

    My staff made a bunch of videos with Camtasia, and now we're integrating them into a web site. Even though I told them "no spaces"... Now, there are hundreds of files with spaces.
    Do I really still need to remove them? I know back in the day the %20 could mess some things up...  None of the links will ever be typed in, so they don't have to be user friendly.
    If I do need to remove them, does anyone know of a tool that will do it for me?
    Thanks!

    Curtis_E_Flush wrote:
    Why not get one of the dozens of FREE file renamers for either Win or Mac and simply use it to "replace" the space with an underscore or hyphen?  It saves you a lot of time, and your files will be W3C compliant
    Because the Camtasia MP4 video files are controlled by an SWF controller, so the file paths in the controller would break.
    To make it complaint, we'd have to rename each of the hundreds of videos (the file renamers would work), then open each master file, find the files lost by changed links, and re-produce.
    Lots and lots of hours.

  • Unable to remove 'r'n from file

    Currently have a folder with numerous files.  Each of these files needs to have the CRLF removed from the end of each line.
    line1
    line2
    line3
    results
    line1line2line3
    the follow code, doesn't produce any error, but doesn't replace them;
    get-childitem -File 'pathofdirectory' |
     select -expand fullname |
      foreach {
                (Get-Content $_) -replace "`r`n", '' |
                 Set-Content $_            
    why is this not replacing the CRLF with nothing?

    Add-content "C:\Test.txt" "Line1"
    Add-content "C:\Test.txt" "Line2"
    Add-content "C:\Test.txt" "Line3"
    Add-content "C:\Test.txt" "Line4"
    get-childitem 'C:\Test.txt' |
    select -expand fullname |
    foreach {
    $Lines = (Get-Content $_)
    $S=""
    $Lines | % { $S += $_}
    [System.IO.File]::WriteAllBytes($_,(([system.Text.Encoding]::ASCII).GetBytes($S)))
    Get-Item C:\Test.Txt
    Get-Content C:\Test.txt
    Directory: C:\
    Mode LastWriteTime Length Name
    -a--- 06/11/2014 12:00 PM 20 Test.Txt
    Line1Line2Line3Line4
    No CRLF at end, file length should be 20

  • How do I remove credit card from file

    HHow do I remove credit card

    On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.  If you are doing it on your iPad then tap on your id in Settings > iTunes & App Store and then tap on 'View Apple ID' on the popup and log into your account  - that should also give you a payments link on your account's page.
    Changing payment info : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
    If you don't get the 'none' option on the payment details screen : Why can’t I select None when I edit my Apple ID payment information? - Apple Support

  • How to remove universal app from only one i-device in iTunes 11.1.3.8, Windows Vista computer

    Trying to delete iMovie from iPod Touch without removing it from iTunes and iPad. In other words, syncing with iTunes just adds it back to the device again.  Thanks.

    Connect the device to iTunes.
    Select the Apps tab.
    Select the apps desired to sync.
    Sync.
    iTunes remembers sync settings per device.

  • Can't remove two songs from iTunes download queue

    Trying to download songs in a playlist with iTunes Match. Got most of the songs, but two are stuck in the download queue. Retry gives an immediate error. Swiping from right to left on a song does not present the delete option it should. I have signed out of iTunes and restarted the iPhone. Lot of other music already on the phone so I am trying to avoid a complete reformat. Any ideas?

    I never laughed in all my life. Here I was, inserting the cd Dance with Me, thinking it's not going to copy the whole thing. yeah, right.
    Sure, it prompted me, Do I want to replace the songs, so of course I said "no, don't replace the songs". and guess what it did. It copied the whole cd (at least I got my two songs).
    I went into the itunes library, and sure enough, all the songs were there twice. So what did my intelligent brain think of? I just unchecked the doubled songs and stuck my ipod into my computer and it synched up and I got what I wanted.
    Now what did I do wrong when it prompted me. I clicked on "don't replace" and it replaced them anyway.
    Am I dumb? or is itunes stupid?
    thanks, Melody

Maybe you are looking for