Remove message highlight color

I had set up in Mail preferences to add message highlight color (Set Color of Message), but once I deleted that preference the old mail still shows in highlight. HOW do I get rid of highlight color on old messages now that I no longer want highlight color. Thank you.

Set up a mail rule with the same criteria as the first but set the color to black. Then run the rule.
Regards
Edit: sorry, if you're referring to highlight color of message threading then change the highlight color in Mail > Preferences > viewing tab > Highlight related messages using color. > tap the color box to edit > select white.
Message was edited by: captfred

Similar Messages

Change new message highlight color

When you first use Mail the selected message is highlighted with a blue color to show what message you are viewing in the Inbox pane.
Somehow, I changed this highlight color to a green but now cannot figure out were to find that command.
Help!

Thanks for posting your fix! I just came had this same problem today with my new MacBookPro...Couldn't figure out how the highlighting changed to green and how to get it back to blue!

Can you get your cracked iPod Touch screen repaired if you colored the top of it with highlighters? If you can't, how do I remove the highlighter?

I cracked my iPod Touch screen at the top where the front camera is and colored the cracks in with highlighter. I want to know if I can still get it repaired even if its colored in? If I can't, how do I remove the highlighter?

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

Need to bypass "Remove and check color cartridge" error message

I have an old HP printer giving me the error message "Remove and check color cartridge." I remove it, it's good, I put it back, same message. I try leaving it out, I get an error message asking me to install a color ink cartridge.
I DON'T EVEN WANT TO PRINT WITH THIS PRINTER. I have a new HP printer connected to my wireless network that I use for all my printing. I am using the old printer for its scanning capabilities in my crafting area. I am JUST wanting to scan old pictures to an external hard drive for storage, so that I don't have thousands of print photos sitting around in boxes and files.
Please help.

I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message. Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could. Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch.
I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

HP PSC 1600 All-In-One error message remove and replace color cartridge

I get the remove and replace color cartridge and printer or scanner won't work. I have replaced the cartridge with new ones twice and it still happens. Just installed a new HP color cartridge and no luck. I've tried everything I can think of.
Please, does anyone have any other suggestions????
Thank you,
Mary Jean Kelso

Hi MJKEL,
Welcome to the HP Forums.
I see that you are having an issue with errors on the printer pertaining the ink cartridges.
I do have a few steps that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a documet that deals with A 'Remove and Check [color / black / photo] Cartridge' Error Message Displays on the Printer Control...
Please feel free to write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

1600 all-in-one series printer error message to remove and check color cartridge will not go away

Error message, remove and check color cartridge will not go away even after replacing cartridge (same refilled). Any help would be appreciated.

I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message. Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could. Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch.
I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

HP 1610v error message: Remove and check color cartridge

In the middle of printing, my HP 1610v All-In-One PSC just stopped and displayed an error message reading "remove and check color cartridge". I did.... but couldn't really determine what I'm supposed to be looking for though. Ink cartridge is full, clean, and seems fine. Not only can I not figure out what I'm supposed to do to fix it....I can't do ANYTHING. no printer menu access, no printing with only the black cartridge, only an orange exclamation point that ceaselessly blinks at me.
I've tried unplugging and waiting 20 seconds
I've put 3 different color cartridges in and the error message only went away with the EMPTY cartridge...which, of course, I couldn't print with!
Please Help ASAP!!
Thanks!

Hi there iceefrost,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do I fix error message remove and check color cartridge?

I have a PSC 2355xi all in one printer. I recently tried to replace the ink cartridges. Error code...Remove and replace color cartridge shows in the printer window. Now the printer will not work at all and I haven't found the fix. HP "Customer Support" has been NO HELP AT ALL!

Hello Kimosabe
If you have not already please try this article it may help with your problem.
Remove and Check Cartrdige Error
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

10.4.5: why are my highlight colors wrong?

no matter what highlight color i choose in the Appearance prefs pane, i get a different color - or, more accurately, a very different shade of the same color - in some places. when i select text in a text-editing app (or right here in Safari), for example, i get the highlight color i chose in the Appearance prefs pane, but if, say, i choose any shade of pure yellow for my highlight color in the prefs pane, my messages in Mail.app are highlighted in this positively repugnant bile green. if i choose a pale purple highlight color, messages in Mail.app are highlighted in a deep purple. and so on.
why is this? if i wanted disobedient computers, i'd run Windows boxes.
thanks.

pray, good van malsen, exactly whom do you imagine me to have insulted, and when and how?
methinks thine imagination doth run amok.
i can appreciate, however, that no one has an answer to either of the questions i posted a week or two ago. but i do think it sad that we're cut loose to drift around out here on our own.
i used to see Apple Computer as an ally, a compatriot in the fight against conformity, mediocrity, the mindless acceptance and consumption of whatever user-hateful garbage rolled out of Redmond. i saw Apple Computer, and the Macintosh, as a cause, and one well worthy of my staunchest support.
it's different now though. the warmth, the fun and the color are gone (well, unless your idea of "colorful" is light blue), replaced with cold, gray (and light blue) efficiency and an increasing indifference toward the needs and desires of users. and one attempt to use .mac's sync function is all it takes to call into question the notion of efficiency as well.
oh, i don't have the energy for this. i'm just heartbroken at the death of the soul of Apple Computer.

Find feature Highlight Color and End of document alert

I am using Version 2.0.7 and noticed two problems with the text find feature that I hope someone else knows about a configuration setting or work around that will resolve the problems.
Thanks,
Problem 1. Found search characters are highlighted in gray. This color is difficult to spot if not looking straight at the screen or if only a few characters are in the search. Is there a preference setting that can change the color of found text searches?
Problem 2. When reaching the end of the email, there is no alert message to ask if the find function should search backwards. Clicking on the find Next button causes the process automatically loop back to the top and begin again.
Is this a bug or the way the function works?

Thank you for responding to my query.
I performed the following additional analysis and confirmed the behaviors still exists. Please let me know these conditions can be duplicated.
Problem 1 - highlight text color
A. Checked preference settings as recommended and confirmed Highlight Color is "Gold".
B. Opened mail message, selected Edit>Find and typed in the search characters.
C. Clicked on the next button in the Find window.
D. Results is that the found text highlight color was "Grey" in the email message. What would be expected is the found text color to be "Gold".
Problem 2 - End of message foud text alert.
I read the initial description and found that this problem was misstated. So I am offering the following script to illustrate it:
A. In the find box select a word or combination of characters that does exist in the message.
B. Click on find button.
C. Listen for the audio alert advising there was no match.
D. Change the Find Box selection to a word or group of characters that occcurs multiple times in the message.
E. Click on the Next button in the Find text window.
F. Note that the find process stops at each occurence of the search characters. (as stated in problem 1 the highlight color is "Grey')
G. Keep on clicking the Find button. The result is that there is no end of message alert. Unlike the alert in step C, the find process automatically loops back to the first match and continues as long as the Next button is clicked. What would be expected is an end of search alert for both unfound and found conditions.
Regards,
Mac OS X (10.4.6)

RH9 Search highlighting color won't stick

When you use the Search feature and select "Highlight search results" the default color is gray. The word or phrase you're searching for displays in gray in all the topics in your search results.
From a usability standpoint, gray is a really bad color for highlighting. People are used to yellow, so if they saw that they would know what it means. Other colors would also send the correct message. But I kept getting emails from people asking me what's wrong with the online help because their screen was peppered with gray splotches.
So I went in and changed the highlighting color in the Webhelp > Search > Search Options dialog. All was well, until the next time I compiled the project. The color choice reverted to gray. Apparently you must go in and make your color choice EVERY TIME you update a project. If Adobe had chosen any color but gray as the default, I'd just leave it.
This is a problem because my project consists of one parent and about 20 child projects. I went in and changed the search highlighting color in all 21 projects, only to learn that the ones I'd since updated were displaying their highlights in gray. So users were getting blue highlights in some search results topics, and gray in others. It shouldn't do this.
If there's a fix, please advise.
Thank you!

Hi there
Hopefully Peter won't mind my offering another possible suggestion.
Try creating a new Single Source Layout. Just right-click the Single Source Layouts pod and create a new layout. My thought here is that perhaps the file holding the recipe for that layout may have somehow become a bit corrupt and creating a new SSL recipe may make things finally "stick".
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to remove tags (not color tags)

How to remove tags (not color tags)
I love the idea of the tags, however there comes a point when some become irrelevant. How can I remove them. I highlighting them in the dialogue box and hitting the delete key, that does not work. ?

I accidentally found that you can remove some tags while in the Sidebar view by just draggng them to the trash.
But after a certain point when you have drug all of tags in the list, you are then left with the "All Tags" button. When you click on that final button, you find that all of the tags you have ever created are still there in the All Tags category. So I guess what I do is just not create any new tags because the list just becomes too long to be useable. I liked the idea of Tags as a management tool, but like so many times before I will just go back to the file name workarounds that I have been using since 1988. They work because they were developed and tested by an actual user, me. Just toss a project number into the file name. Works every time, unlike the undocumented "features" that are apparently not tested.
But, if what I hear is true that Apple does not monitor these discussions, what was the point of writing this.
Would like to think they would look at these "discussions" as a resource, but.......

Highlight/color elements in video, add arrows ?

Hi all
This is my first time posting here so bare with me. I'm new to Premiere (noob) and my knowledge is close to sea bottom, but I am ambitious .
I was given a project by my university which is due at the end of the next month. What am I trying to achieve? I have a 3 minutes video, which I have to edit so to highlight/color several elements in it. It is a surgery recording (abdominal surgery), so vessels, nerves and other anatomic structures have to be colored/marked. Arteris in red, veins in blue and I have to insert a few arrows so to identify the respective elements. I've rummaged the internet/youtube and couldn't find what I was looking for.
Can you guys give me a helping hand? This project has come to a stall because of my incapacity to work in Premiere (CS4).
Thank you in advance
kukubaux

We were all "new," at one time, or another.
Here are two articles, that might prove helpful. They take different tracks (no pun intended), but can do essentially the same thing - call out certain aspects/objects in your Video.
Creating an arrow, etc. : http://forums.adobe.com/thread/759605?tstart=60
Highlighting a moving object with Track Matte Keying: http://forums.adobe.com/message/4575874#4575874
Hope that those help, and good luck,
Hunt

Highlight colors change (invert) on some backgrounds, i can make it back by changing use system colors and or background color, i would like to knoe if there is a setting to stop the change ?

i set my highlight colors to yellow background and black foreground in windows , it uses the same colors in firefox except as i highlight over some colors the foreground and background colors invert yellow on black , if there is a setting (or one can be added) in about:config to make the highlight always stay as yellow back and black foreground ? , im not sure if it is done within firefox though or if it is win xp but itcan be changed inside firefox about:config with browser.display.use_system_colors and/or browser.display.background_color .

that sort of makes sense but when you look at youtube messages , each alternate line is a very pale blue and when highlighted each alternate line the color is switched , this also happens on all web pages with simuler shading (not just pale blue) .
about the purple highlighting , ive never seen that , i have firefox on 2 PCs , a laptop and a notepad and they all use the colors set in win xp for highlight , even when use system colors is set to false , all that happens then is they swap about (invert) agen , i some times have to switch browser background color as well . sorry for being repetetive , im just trying to be clear , i have tried fine tuning BG color but on some pages just 1 single number away from white makes the switch,on other pages you can go nearly all the way to black befor it switches .ive just seen add images , ill send some pics to show what im trying to say .

Photosmart 2575 cartridge error "Remove and check color cartridge"

I have one of the above all in ones, which has given excellent service until recently. The last 2 colour cartridges (Both were original HP) have been acting up. When the cartridges were first installed all was well but as the ink levels fell to about half, I started getting a "Remove and check color cartridge" warning. I followed the instructions and cleaned the contacts on the printer and the cartridge and the problem seemed to be cured. The some time when I turned the printer on, the message re-appeared. Again, cleaning seemed to redress the problem. As the ink level fell further, the warning appeared more regularly, until at about one quarter, the problem could not be solved. I fitted a new cartridge and all was well again until that too had the self same problem. Now that has reached one quarter and the problem will not go away. As far as I can see, the contacts on both the cartridge and the printer are perfectly clean, the cartridge sits fair and square in it's position and there is no apparent damage to any part of the setup.
Any assistance you can provide to resolve this problem would be gratefully appreciated.

Followed this proceedure with both cartridges. When they were about half full this would solve the problem temporarily but it returned. As they got down to around quarter full this would not make any difference. Have now fitted a new cartridge and the printer is working as it should. Will have to throw away another quarter full cartridge by the looks of things. I will see how this one performs. Thanks for your help.

Remove message highlight color

Similar Messages

Maybe you are looking for