Remove the XISUPER user

Hi Everyone,
Does anyone see a problem with the removal of the XISUPER user? We are locking down a new system for security purposes and want to make sure this user is not required for any specific transactions/programs in the system.
Regards,
joe

Hi Joe -
XISUPER is a user that is created at post-installation time, significance being that it was not created during installation (like the service users XIISUSER, XIAFUSER, etc.), but only manually afterwards. You could have just as well have created a different user during that post-installation step where XISUPER was created (with the same roles of course).
Even with that said, you must be careful as you or others may have used it in various post-installation connection settings (e.g. SLD Data Supplier service, RFC dests, etc.).
Regards,
Jin

Similar Messages

HT201317 Remove the "By user name" title in Photo Stream

Is there a way to remove the "By User Name" title displayed in the upper right-hand corner of a shared Photo Stream? I sell stuff online and I would like to use the Photo Stream to post photos of, let's say, a furniture set. However, I'd like to maintain a little privacy by not having my first and last name displayed in the shared Photo Stream page.
Is there a way to do that, or would I have to change my profile name entirely to something like Furniture Master, so that iCloud displays that instead?

I don't think Photo Stream is for commercial use.

Cannot view the folder security after removed the default "users" group from folder

Hi guys
Due to the domain change, I am doing a windows 2003 server migration to windows 2012 for a file server.
Tones of data have been copied from the old 2003 server to the new setup 2012 server.
We need remove the "builtin\users" group from the folder security to maintain correct rights access of user to network folder.
Once the "builtin\users" group has been removed, the account in domain admin group can no longer read the folder security.
Has anyone faced the similar situation?
Or, is there any change in folder security rights of Windows 2012?
Thanks in advance
KC@ITL

Hi,
Glad to hear that the issue has been resolved.
If you need any assistance in the future, please do not hesitate to post in our forum.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Recently i purchased a macbook pro 2nd hand and would like to know how to remove the main user of the mac and change so it is my own with my name?

i bought my macbook pro second hand and am looking for help as to change the main user of the mac so it feels like itsnow mine , the login has been changed to my name but the full user is in the name of the previous owner , someone please help?

I don't really care about all the lost files I'm just desperate to change this folder in users to my name so it's not someone else's , currently I'm in advanced options on users and groups , it says in this order, userID:501 , group:staff , account name:Bryce bell [which I changed and didn't change the folder] , login shell:/bin/bash , home directory:Brycebell [again I changed] , uuid:[some sort of code] and finally aliases:which is my email address

I was just given an iMac G4 running OX X 10.4 Unfortunately it is password protected. How do I set up a new user? I don't need (and would prefer to remove) the old users.

Since I cannot even get past the opening security screen I don't see how to set up my own user account. Thanks!

Thanks. Believe, me I would have done that if I had the DVD. They couldn't find it when they gave me the computer. They are still looking but who knows if they'll find it. I'm going to try to get one from someone else and was hoping there was a way to bypass this as there is on Windows machine, just set up a new user and deal with the old users later if ever.

How do I remove the previous User ID from my Mac?

I bought my Mac from a previous owner who forgot their password to their user account. I am restricted from removing programs ETC. How do I remove their account and give me all administrative powers?

Capersaway!
You cannot use Model Specific system discs.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
You need the original system discs that shipped with the Mac when manufactured, to reinstall Jaguar 10.2.x.
Contact the previous owner, and request that the discs be furnished.
You need the a Full Retail Version, of the Tiger Install DVD, to upgrade.
Or, if you call Apple Customer Service 1-800-767-2775, and furnish the Serial Number of the PowerBooK, you can order a replacement set of the original system discs.
If you call Apple Phone Sales 1-800-692-7753, you can purchase the Tiger 10.4.x discs.
ali b

How do you remove an apple id when you can not contact the previous user?

I am working with a local Pawn shop that purchased an ipad from an indavidual. They restored the ipad and apparently, the contact info from the user is bogus. So, is there any way to get the apple id removed when you can not contact the previous owner? I have the serial number and any other info that may be needed.

No, there is no way to remove the previous user ID. If the previous owners information was bogus the iPad is likely stolen.

Removing the user from standard task group

Experts,
I need to remove the one user from the standard task "Display MC Document (outbound w/o IDoc)". Since it is a standard task I'm not able to make any changes.
I hope I need to change in the agent which is assigned to this task. But donno how to find the agents assigned to this task.
Please help me in resolving this.
Thanks,
Naveen

Hi Naveen,
If that user assigned as the 'Possible agent' of the task then you can remove the user easily.
In the workflow template, go that activity. Under the Task ID there is a option called 'Agents' and click that icon to open. In the new screen, the possible agents of this task will be displayed.
Select the desired user and delete it.
Thanks,
Viji.

Wiped the hard drive and the previous users Apple ID is still showing up in itunes.

How can I remove the previous users Apple ID stuff and equally as important, how is it still on there given I wiped the HD? The disc was zero'd out and then the OS reinstalled and it still remains.
When adding purchased items/authorizing the computer, my friend is having an Apple ID box pop up with a random name once, she enters her correct info, a second random name pops up, again she enters her correct information, and it finally gives an error message stating it's already added. I'm most confused by the fact the old Apple ID info is showing up. How can I eliminate/remove the old Apple ID promts?
Full background, it's my old 13" MacBook Pro running its original 10.6.3 software (currently being updated to 10.6.8), I pulled my HD and threw in a spare I had lying around from. then performed the zero, reloaded the drive etc. Any help is appreciated - Thanks!

You may be right, but it is far easier said than done. What do you do when almost all shadows are gone, and the screen picture looks flat and horrible? I asked an Apple specialist who recommended removing pref files. Since there were none I could identify as related to the screen, the only option was to start removing (and putting in a folder on the desktop) the ones that immediately did not seem important. It became a guessing game, and I'm not sure if I have learned a lesson. The lesson I (and I'm sure a lot of others) really need is good helpful descriptions of different categories of pref files and their function. I had that, I could have done what you suggest, remove the right ones and leave the wrong ones alone. If you can guide me to such information, I would indeed be very grateful !

Remove GrantSendOnBehalfTo disabled user accounts - A novice at scripting

Hello. Can anyone help please
In our exchange 2010 environment we have users who are granted send on behalf to access. Obviously some users leave and I m finding that there are ghosts left behind which are causing issues with our team who add users into the grantsendonbehalfto
option using the EMC. Using the log view we coy out the command and then remove the disabled user from the command and then paste this into an Exchange Powershell command line. This wrks because it is doing what Exchange EMC does which is rewrites
the -GrantSendOnBehalfTo option in it new entirety.
The problem occurs because I need to remove these en-mass from approx 700 plus accounts.
I have tried to modify one user in order to get the script to work but it doesn't.
This is the error message that happens when I run the script below against a known account with at least 2 disabled users in:-
Couldn't find object "xxxxxxxx.xx.xxxxxxx.xxx.xx/DisabledUsers/2013-08/Gaynor Collins-Punter". Please make sure that i
was spelled correctly or specify a different object. Reason: The recipient xxxxxxxx.xx.xxxxxxx.xxx.xx/DisabledUsers/2
13-08/Gaynor Collins-Punter isn't the expected type.
+ CategoryInfo : NotSpecified: (:) [], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : F6498844
+ PSComputerName : ex02-0029.xx.xxxxxxx.xxx.xx
Am running the script from my local PC
This is the script I have used.
# Gather info use get-mailbox -resultsize unlimited$mailboxes = Get-Mailbox zplew1
Foreach($mailbox in $mailboxes)
for($i = ($mailbox.GrantSendOnBehalfTo.count)-1; $i -ge 0; $i--)
$address=$mailbox.GrantSendOnBehalfTo[$i]
$addressString=$address.addressString
If($addressString -like "*disabled*")
$mailbox.GrantSendOnBehalfTo.removeat($i)
$info >> "C:\Scripts\grantsendonbehalfto.csv"
$mailbox |set-mailbox -GrantSendOnBehalfTo $mailbox.grantsendonbehalfto
}If you requiere any more info please let me know.

#1 - I recommend posting in xchange forum fo rhow to do this
#2 - Wen an account is disabled most on the information in the object is hidden. YOu would need to undelete to use the object.
#3 - Get list as text and validaye al values are not deleted accounts. Remove deleted and save back.
¯\_(ツ)_/¯

I'm trying to re-set the iTunes on my Mac. It is locked to the previous users account

I'm trying to remove the previous users itune account and use mine.

In iTunes pull down the Store menu and select Sign Out.
Ideally you should wipe the HDD of the original owner's data and install the OS clean.

No Start Menu, removed and added User Account then no "Built In" Apps - Build 1049

So quick history, was having problem with start menu not working under build 1044 for the second user I'd added to the machine (Microsoft account). Rebuilt using "Remove everything and reinstall windows". Seemed to resolve the problem for the newly
added user and was still working under the original user (also Microsoft Account). Then along came build 1049 and now the same start menu issue occurred for the original user account. So, as both were setup as admins, removed the original
user account, restarted, checked all data removed and added the account again.
First attempt added the account as a local account then added the Microsoft account after login, result = start menu working but no "built in" apps (store beta, insider app etc).
So removed account again and added again, this time using Microsoft account immediately, logged in and exactly the same result.
Any ideas how to resolve?

You cannot use the Start Menu logging in as anything that would be in the BUILTIN\administrator group on the computer. I had the same problem when I added the machine to a domain, thus domain admins is in the BUILTIN\Administrator group.
The reason being that the Windows 10 Start Menu is an appxpackage, and you can't run appxpackages using the built-in administrator account. As is the case for example with Windows Store. It doesn't however give you a warning message, you
just click on the windows button and nothing happens.
This is just total madness imv. It kind of made sense when all the appxpackages where apps, but now they include parts of the OS, the OS is essentially non-functional when you log in using anything in the BUILTIN\ administrator group.
If you really want to blow your mind, go into PowerShell and run the command: get-appxpackage|remove-appxpackage
If you run that on Windows 8.1 it will remove all the bloatware apps for the logged on user. Run it in Windows 10 and it removes various parts of the OS for that user as well, such as the Start Menu!

For some reason the guest user on my mac book pro has a password and did not set a password on it how do I remove it?

For some reason there a password on the guest user on my mac book pro when I try to login in to for someone to use, I didn't set the password I try to remove it and try disable the guest user but didn't work so don't know what to do please help

Restart the computer (with Parental Controls off) and try again. If there's no change, see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Remove the user status in Sales order

how to remove the user status in sales order header? could you give the function module or BAPI to get this?

Hi,
You Can try this-
BAPI_SALESORDER_CHANGE,
FM 'I_CHANGE_STATUS'
Regards,
Sujit

How to remove the option "Set as default background..." from the right-click menu on a picture, for all users.

Hi! I would like to know if there is any possibility to remove the option "Set as default background..." from the right-click menu on a picture, for all users. I know that's possible to edit userContent.css or userChrome.css, but this concerns only a profile at a time and being in a domain, I would like to set this for all people using Firefox.
Can it be possible to edit a mozilla.cfg file to get the same result?
Thank you in advance for help and tips.

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

Remove the XISUPER user

Similar Messages

Maybe you are looking for