Removing complete Challan Mapping data from system

Dear Consultants,
My client has entered erroneous data for challan mapping. When I checked the data, I found that there is some difference in the Challan amount & available amount. It means there are some employees mapped for these challans. but the main page of CMAP shows employees mapped = 0. When I tried to delete the challan data, system says, there are some employees mapped to these challans.
When on the last node of CMAP, I tried to select all employees on the right hand & click on the arrow from right to left, no amount of challans was changed.
May I know how to delete the entire mapping data from the system?
regards,
Bindumadhav

Dear MVR,
The reply by Mr.Deepak is as follows. :
Dear,
Regarding your query, the issue reported by you basically happens due to inconsistent mapping or unmapping of the employees to the Challan.
We would suggest you to kindly delete of the negative entry from the table 'T7INTE'. You also need to delete the entries from the table PCL4 as well for the corresponding challan for which the negative entry has been created. Performing the above suggested steps will remove the reported inconsistencies. After deleting the entries completely, kindly perform the Challan mapping for the employees again. Please make sure that you are not deleting the entry from the table for which Form24Q
has already been generated. The deletion process can be explained as such:
1. Execute the transaction 'se16'. Go to the tables mentioned above. You can execute the table 'T7INTE' with the TAN number. On execution, a negative entry will be displayed for a particular challan. Select that entry and delete of the entry from the table.
2. Go to table PCL4. Execute the table with relid as 'I1' to 'I2' and the TAN number in the field 'SRTFskindly performing the mapping action again. Hopefully, following the above mentioned steps will resolve the reported inconsistency and you will be able to perform the mapping successfully.
Best Regards,
Deepak..
I can see some entries. But the system does not allow me to delete the table entry from T7INTE & PCL4.
Regards,
Bindumadhav

Similar Messages

IPhoto for iOS removes the GPS exif data from the photo after an edit

iPhoto for iOS removes the GPS exif data from the photo after an edit
Using the iPhone camera, I take a photo and then I want to make the photo a little brighter.
So, I edit a photo using iPhoto for iOS and then save the photo back to the camera roll.
Now, I might want to see where that photo was taken via another app (like Photo Mapo) or on the map using the Photos app, or even the Mac iPhoto app.
However, the GPS data has been removed. Looks like all of the other exif data is still in the photo.
Why not just have a feature to remove the GPS data if the user wants? no reason to remove it for them.
The user explictily chose to have location services turned on so the GPS data would be in the photo.
Is this a bug?
Thanks,
Brian.

First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
None of my cameras has a GPS function so I never see that data in the info of a photo in iPhoto for iOS. But I do see the map choice to set a location for the photo. Perhaps a reboot will fix this for you.

Is it possible to remove or edit gps data from photos?

Just listened to a Mac Roundtable podcast and they were talking about removing or editing gps data from photos taken with an iPhone but they never explained how to do it.
Is it possible to remove or edit out latitude and longitude info from photo files?

Thanks for this, though after looking at it I'm not too inclined to use an app that requires getting into the terminal. Way too technical for me. But thanks.

BAPI name to access employee data from systems like CSS, ISP GTP etc

Hi All,
Could you please suggest which BAPIs we need to use to access employee data from systems like CSS, ISP GTP etc
Regards,
Poonam
Moderator message: Welcome to SCN!
Moderator message: please do more research before asking, show what you have done yourself when asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on May 20, 2011 2:09 PM

Hi All,
Could you please suggest which BAPIs we need to use to access employee data from systems like CSS, ISP GTP etc
Regards,
Poonam
Moderator message: Welcome to SCN!
Moderator message: please do more research before asking, show what you have done yourself when asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on May 20, 2011 2:09 PM

Load Grid with data from System.Data.DataTable

Hi all.
A have a System.Data.DataTable e need load a grid with data from this DataTable.
How Load a Grid with data from System.Data.DataTable?

Hi Francisco,
actually i don't think that you can use a .NET datatable to fill a business one grid.
the business one has it's own datatable.
in c# it would look like this:
oForm.DataSources.DataTables.Add("MyDataTable");
((SAPbouiCOM.Grid)(oForm.Items.Item("grid").Specific)).DataTable = oForm.DataSources.DataTables.Item("MyDataTable");
oForm.DataSources.DataTables.Item(0).ExecuteQuery("SELECT Field FROM [dbname].dbo.TABLE");
((SAPbouiCOM.Grid)(oForm.Items.Item("grid").Specific)).CollapseLevel = 1;
((SAPbouiCOM.Grid)(oForm.Items.Item("grid").Specific)).AutoResizeColumns();
((SAPbouiCOM.Grid)(oForm.Items.Item("grid").Specific)).SelectionMode = SAPbouiCOM.BoMatrixSelect.ms_Single;
good night
lg David

I accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

i accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

i accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

Ican't Remove My Credit Card Data From My Account

Please Urgently I TRy Alot to Find Any Way To Remove MY Credit Card Data From Adobe Connect But I Found No Way Please If Any one Have Idea About This Also Its Aouto Deduct the Mony from My Visa It Makes Alot Of Problrem For Me Please Any One Can Find Way I think

It happens on Mac App Store & iPhone App store as well.
So clearly the problem is on my Apple ID..
I've changed my credit card details on my Apple ID but it doesn't reflect onto my phone when I login after restarting the phone. Even if i sign out.
When it reaches the part where I would need to verify my phone after entering my password. It just keeps requesting for my password and never shows me anything.
If I click update apps it'll just disable my account. Even on my Mac App store same thing happening.

How can I remove all Time Machine data from an external HD, while retaining the other folders/files on the disk?

I recently replaced my old Macbook Pro with a new Macbook Pro Retina.
The original MBP had Time Machine set up on an external HD, and I also had some manually saved/backed up files (stuff that didn't need incremental backups; very old stuff) on the disk as well, in folders. This worked fine and well for the life of the original MBP.
When I set up the MBPr, I did not elect to transfer everything over from a Time Machine disk, as I wanted a Fresh Install; I chose to just re-download/install the apps I needed from the App Store. Much cleaner, more stable. I updated to Yosemite immediately so, it gave me more of a clean install.
The problem is, Time Machine now won't read any Time Machine backups from that disk. Migration assistant can pull data from it, but it's a bit wonky. It was easier to just manually copy over what I needed.
Now, I just want to "reset", and completely remove the old Time Machine data from the external hard drive, since it is completely useless to me now (I can't access it on this computer, and it's taking up space). I want to remove the Time Machine data, as if it were never there, but keep my other folders/files that are on the disk (so, a format is not feasible).
I will then set the disk up as a new, fresh Time Machine disk for the new MBPr.
What is the proper method for removing Time Machine data from an external disk (which doesn't seem to be associated with this machine anyway)? I know a simple rm -rf will cause problems.
Thanks for any help provided.

See the yellow box in #12 of Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).

Performance data from system and DMS logs on PDW.

I want all of ther performance data as given below of the particular completed job with respective login ID from system or DMS logs on PDW
What is total Memory and CPU used for completing the job?
How many rows processed?
What is read and write data size?
What is disk I/O ?
How much time taken for completing the job?
-Prasad KVSV

Hi Prasad, you may want to have a look at the following links:
http://download.microsoft.com/download/5/0/1/5015A62E-06BF-4DEC-B90A-37D52E279DE5/SQL_Server_2012_Parallel_Data_Warehouse_Breakthrough_Platform_White_Paper.pdf
http://saldeloera.wordpress.com/2012/08/27/pdw-tip-query-optimization-techniques-to-avoid-shufflemoves-and-partition-moves/
Regards, Leo

HT3231 I have migrated all of my data from my old 2006 MacBook to a new 2011 MacBook Pro. Everything went fine. How to I remove all of my data from the old MacBook so I can give it to my girlfriend to support her iPod? I want to remove everything and star

I have succesfully migrated my data from my 2006 MacBook to a new 2011 MacBook Pro. How do I delete ALL of my personal data from the MacBook so my girlfriend can use it to support iTunes and her iPod?

Order a Snow Leopard 10.6 install disk for $29 from The Apple Store as long as you have at least 1gb of RAM. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
You can now follow the instructions on the install screen

Access to EHS data from system outside of SAP

We are creating a Formulation tool in a SQL database with a Access front end which will need to use EHS Specification data and eventually push the Formulation data back into the SAP EHS Spec database.
I would like this new database to have Real-Time access to SAP data. We currently are using RFC connections with tools such as EASY-Expert and a external Rules based program Atrion as well, so I know it is possible to feed this data back and forth using XML files.
Any advice on how I should proceed and maybe some external tools for purchase that will help me do this.

Hi Beverly,
it is possible to access EH&S data from outside SAP by using the standard SAP BAPIs (e.g. BAPI_BUS1077_GETDETAIL for reading EH&S data) which are RFC enabled. Another possibility would be to develop your own RFC enabled function modules in the SAP system and call them from outside.
From your access database you can use VBA to perform the RFC call.
Best regards,
Andreas

Removing all the hidden data from photos

If I export a photo to share, I often want to remove all the extra hidden stored data such as date taken exposures etc. Is this easy?
Rod

Hi rod,
By accident I found that a little app I use (ImageWell) to add connotations and text to my screenshots also strips most if not all the EXIF data from an image that you drag out of the Image well.
I just checked it out again. I dragged an image into the well, changed the name of the image and dragged it out. The EXIF data was gone when I opened it with Preview and did Tools/Get info.
ImageWell

Removal of all mail data from ipad

I have removed my email accounts from my ipad but when I go to settings|general|usage, then I still see xxx mb of mail attachments. There are no accounts anymore, so how do I delete this data?

Not sure if this will work.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwnhttp://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

Mapping data from internal table to SAPSCRIPT Box.

Hi Gurus,
I have to create a sapscript where in I should get data from standard tables and display the data in box (table format) in sapscript. I know how to get a field (perform in zprogram) into sapscript form zprogram. I dont know how I can get data (internal table) from my zprogram into sapscript and display in a box.
Your help is highly appreciated.

Hi David,
    consider the below example say if your zprogram having the internal table table loop and you want to print the contents line by line or in a box,
LOOP AT tj_1irg23d.
header line
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            element = 'ITEM_HEADER1'
          EXCEPTIONS
            OTHERS = 1.
endloop.
then in your sap script main window or where ever you want to print just straight away give your internal table fileds as follows(just for example)
I2           ,,&J_1IRG23D-ZEILE(Z)&,,&J_1IRG23D-MATNR&,,&J_1IRG23D-CHAPID&,,
=           &J_1IRG23D-MENGE(Z)&,,&J_1IRG23D-MEINS&,,0.0,,
then it will bring the values of your internal table in the form.

How do I remove on my mac data from address book

I want to get rid of my on my mac data from address book locally on my imac and just use the icloud data to populate address book. Someone else set up my other machines in the office that way, and I want to do it the same on this imac. How can I do this?
Thank you.

Hi Csound1,
I am stogling with the same issue posted on this discussion.
Exchange2013 and raw contacts populated on my contacts as well as on the exchange server (I have seeing it using a PC and outlook).
You sugest to clean on My Mac contacts. Do not set on My Mac as a default account. Following is what I found:
There is no way to get out the on My Mac account from contacts.
There is no way set any default account on contacts>preferences>general
The on My Mac contacts list IS EMPTY and the '-' sign is hidden on the contacts>preferences>accounts.
When I turn on my Exchange Account on my contacts are downloaded from the server, however, I still not able to set ANY DEFAULT ACCOUNT at all.
If I leave like it is 2 days later I will have at least a dozen of those expurious emails on my contacts list.
Thanks,
Edson

Removing complete Challan Mapping data from system

Similar Messages

Maybe you are looking for