Removing fast color correction

While removing color correction from a clip. I notice a gray like box image in the center of my screen. How do remove this before exporting file/media?

Hi DCb,
Have you tried deleting media cache files? Find them in Preferences > Media > Media Cache Files
See if that helps.
Thanks,
Kevin

Similar Messages

  • Key frames effect controls and Fast color correction

    I just learned about keyframes and gradual transistion of effects and i like that a lot.
    Putting it in practice using the Fast color correction feature ; I seemed to miss the key navigation bar (I hoped to find it on the right side of the Fast Color corrector title line or ??? in the effects control panel)
    I guess I'm looking at the wrong end of the world, or do keyframes not exist for fast color correction, I seem to notice the keyframe navigation for time Remapping and opacity..... where did I lose the keyframe navigation bar for fast color correction ???
    Pro CSS3 on windows XP fully patched
    hoping very hard I'm just looking at the wrong side of the world
    please give me a hint.

    You will find links to many
    free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro, including how keyframes work.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Fast color correction in premiere pro

    Hi, I'm having a problem using Fast color correction with two different clips which show the same picture and are of different colors. here are the frames:
    This is the correct color; checking the white balance it's perfectly white when check with the front of the raft. Perhaps the saturation should be slightly modified but over all this is exactly what you see when arriving at Red Cavern (the name speaks for itself) on the Colorado.
    Here is the same shot taken at the same hour by a friend of mine who gave me some of his footage; everything is either white, pink or grey even the yellow raft on the left has not its true pure yellow which it is in reality:
    Although taken at 20 years interval, the shots were done most probably at the same hour. The only difference being a more important set of trees due essentially to the level of water higher on my trip in 1995 than 2 years ago on my friend's one. The beach on the right side of mine being under water or having formed later. Of course the second shot is done with a digital camcorder which did not exist 20 years earlier.
    As one can see the reds are washed out  and do not correspond to reality. The footage is taken at the Red Cavern on the Colorado
    The problem is to correct the second footage to get the same reds as both footage cross dissolve from one to the other and that I  wish of course to be nearer as possible of the true colors. I can't check the white balance using Fast color correction on the second footage because there is no pure white visible anywhere. The sand at the base of the cavern or on its right is not white in reality as it consists of deposits either of mud from the river or sandstone of the cavern and the redwall above. Which effect would enable me to correct the second footage to approach as much as possible to the same color of the first one. Most probably FCC is not the right effect to choose.
    Thanks in advance for your suggestions.
    Claude

    I think that's about as nice as you can expect ... years apart, or even just hours apart with sun coming in a different angle on the same rocks (not even depending on any reflection changes!) can oft get massive shifts in "apparent" color. Which is ... real? Either, both, neither? It's actually one of the things that makes going back & shooting in the same place over & over interesting ... it's never EXACTLY the same ... or rarely so.
    Ahh, now we're almost into a discussion someone will moan about needing to be continued over on the Sg forum ... tee-hee.
    From your comment about transferring clips ... are you using an EDL process? When using "Direct Link" (the "direct to SpeedGrade" command) normally all the "stuff" from the PrPro project are included. There have been the odd instances where Sg doesn't "see" something, but ... I'm curious, I've not run into this for most anything I've done "direct". Either direct or EDL can work, but it does change your work-patterns a ton depending on which you choose.
    SpeedGrade is an amazing tool ... and is designed to give a very good basic correction and then allow one to step off the deep-end into stylin' your shots. Especially with the large collection of "legacy" clips you've got from your friend, that seem to be of a similar "look", you can correct those for basics (WB, dynamic range, blacks & whites, hue shifts) using a Primary or two or three and then a Secondary for the hue-shifts. Then save that as a "Look" and anytime you run more of those clips, you can just in a couple clicks throw that Look over top of them and have all your previous work on that footage done bang. Slick as all get out, and I think you'll love that part of it.
    Just a bit on my process that has come about since going so heavily into DL ... it used to be enough "work" to export an EDL, load things into Sg, then export out to re-import back into PrPro that like most I did pretty much to edit-lock & then to Sg. That is pretty much History ... it's so fast that when I start putting together a sequence for a new project I'll just throw a number of clips onto the timeline ... DL to Sg, do a Basic grade on them (especially if there's significant skin as I've got a GH3 and it naturally makes skin un-natural so I've a Look to recover skin-looking skin) and go back to PrPro. Now as I'm editing I've got a feel for how good a visual I'll get off that group of clips. Mostly finish my editing, with maybe an occasional minute or two over in Sg (quite literallly) doing something like making something a Master Clip so the other bits of that one get the same grade automatically). Before doing the final export out of PrPro I'll go to Sg and do the rest of the "style" work.
    Then back in PrPro thow on my titles & such, pop in any fixed audio from Audition, & out it goes.
    I do use some "adjustment layers" added to sequences in PrPro simply to use for additional grading layers to utilize in Sg over groups of clips or occasionally one if I'm doing enough I want to put it "up" on a different layer. Not always ... but sometimes.
    Pretty slick for the most part.
    Neil

  • Premiere pro can't fast color correct and deinterlace on GPU

    I recently posted saying that Premiere Pro could not succcessfully deinterlace a timeline that had footage with different field orders. Since then, I have done some more tests and have realised that the actual issue is that Premiere pro can not deinterlace footage that has a fast color correct effect on it. I replicated the same scenario on other footage and another machine with a different GPU and the same issue exists. Does anyone have any ideas on how i can fix this or am i going to have  to export an intermediate for each step? Cheers

    OK.
    Next try checking Maximum Render Quality.  (It'll force some things back to the CPU, including scaling and deinterlacing.)

  • Fast color correction effect is very slow in Premiere CC

    I have been working on the new premiere cc and the color correction effect is very slow when I make color adjustments on the wheel anyone else having this issue???

    I have noticed some response lag with the Effect Controls panel in comparison to CS6 on the same machine.

  • Color correction problem between original sequence and multicam sequence... Please help

    I used three camcorders to record a youth dance recital.  I created an orginal sequence for the three camcorders and another sequence using the multicam feature to edit the dances.  After I finished editing, I went back to the original sequence to make some color correction and brightness adjustments using the Fast Color Correction controls.  After that, I sent everything to Encore to create a DVD.  When I watched the DVD, I noticed some of my color correction settings were still off, so I went back to the orginal sequence to make some changes.  Unfortunately, the multicam sequence would not read the new settings.  After a few unsuccessful attempts to get the clip from the multicam sequence to read the clip from the original sequence, I decided to start over by clearing the Fast Color Correction controls from the clip.  The multicam sequence then adjusted back matching the original sequence.  However, when I started a new Fast Color Correction control in the original sequence, the multicam sequence would not take the new settings.  How to I get the mulitcam sequence to read the orginal sequence?

    Thank Jim for replying:
    I am stumped on this one.  I did a few radical tweeks and it did not take.  For example, I made one clip in the original sequence go completely dark.  However, the clip in the mulicam sequence did not change.
    I even deleted the render files and the work area render files and started over with making changes.  Nothing.  Any change I make on the original sequence will no longer adjust in the multicam sequence.
    Any last words of advice before I delete the entire multicam sequence and start over?  Thanks.

  • CS4 - Color Correction Bug with MPG2 export

    I just want to verify this is a bug others are seeing before I submit the bug report.
    1. Create a new timeline of your choice, (size etc does not matter)  Make sure "maximum bit depth" is selected.
    2. Next, place a clip of your choice (HDV, AVCHD, or EX1) that has bright sceen in it so the IRE hits 110.
    3. Place the Fast Color Correction or Three way color correction effect on the clip.  Change somthing (like white balance or whatever)
    4. Export the clip to MPG2 BlueRay.  Any preset will do.
    5. Now bring the just exported M2V clip back into the project and place it on the timeline.  The max IRE value will be 100, not 110.
    6. If you do step 4 but export the H264 BluRay, the IRE will stay at 110.
    I was doing some CC and it was driving me crazy.

    Bump. Has anyone seen this problem? Seems like a very comon workflow.  CC a clip, then export the MPG2?

  • Color corrections Premier CS3 !

    Dear friends !!
    Last night i was browsing through this forums and few other pages on the net and found a place ,like a tutorial about CS3 color corrections
    I very much believe that was somewhere in this forums , where it shows step by step how to do color correction, I remember there was a picture of some kind of wooden cabin with a picture of drop and it was showing the graphs as well .
    Any idea ? please
    very much preciated .

    I do not have the tutorial in question, but I can at least get you started with the effects you probably will be using.  The two main CC's I will use are either the Fast Color Correction or the Three Way Color Correction filters.  You can also get something out of this tutorial.
    http://library.creativecow.net/articles/sareen_aanarav/basics_of_color_correction/video-tu torial.php

  • HT4589 Is there a recomended way to delete proxy and optimized clips once a project is completed and is ready for archive? also, can proxy and optimized clips be removed (to save space) once a project is ready for color correction and the original clips a

    Is there a recomended way to delete proxy and optimized clips once a project is completed and is ready for archive? also, can proxy and optimized clips be removed (to save space) once a project is ready for color correction and the original clips are used

    No, they are NOT the same as proxy or optimized.
    When you add a clip to your timeline and, say, apply an effect to it, or superimpose a title on the clip, FCP X has to make many calculations to determine what color each pixel of each frame should be. If a section of your timeline is not rendered, it has to do all these calculations every time you play those frames. A render file has the frames already "calculated", so it plays fast and smoothly.
    For simple compositions and a fast computer, you may avoid rendering completely - and you may also choose to only render the portions where playback stutters.
    Render files can be safely deleted. FCP X can recreate them if needed (either automatically if you have "background render" on, or on demand, when you select the "render" or "render all" commands).

  • Removing color correction targets

    After color correcting using a threshold adjustment layer and placing your black and white targets on the image, how do you remove the targets when you're done? They seem to save with the image.
    Thanks in advance.
    Kevin

    Choose that tool and click 'clear' in toolbar (CS3)

  • Remove Color Correction Preset?

    Being able to save a color correction preset is great (in the sprocket menu in the color board.) 
    But to avoid clutter, and since I'll probably never use the one I just created again after this project, anybody know how to remove them?
    Is it possible at this point?  Can't find it anywhere in the manual, or in any associated menus.

    Many thanks sir.
    Hadn't looked in the movies folder, since all my events and projects are on external drives.
    Cheers.

  • Color correction in batch resizing.

         Anyone know good method for batch resizing that doesn't mess up color correction? I have a huge textile swatch library that I would like to batch to a resize, but when I batch resize the fabric textures compress or expand creating a tonal shift. Any good work arounds?

    Remove Color Cast is relative simple:
    Add the Fast Color Corrector.
    Sample an area with the eyedropper from the White Balance' while holding ctrl key down that is supposed to be white.
    Done

  • 5930K vs 5960X for AVCHD editing and color correction?

    ***I have also posted this in Hardware Forum because I'm not certain which forum will be the best place to ask. Mods, I apologize if this is a no-no and of course you're welcome to remove the one you deem inappropriately placed. Thanks**
    Hi guys, getting ready to have a new custom system built (probably iBuyPower, not sure yet). I would love your input on choosing the ideal processor. I have read benchmarks and forums on both the Intel 5960X and the 5930K. Most benchmarks are only concerned about encoding times, not the actual editing and color correction processes. I realize that encoding (exporting) would be generally faster on the 8-core 5960 compared to the 6-core 5930. HOWEVER, all my source material is AVCHD and for that, higher clock speed does make a big difference during the actual editing. So let's forget about encoding/exporting right now and ONLY think about the actual editing. Let's also assume I will not overclock, or if I do then never more than 20%.* I 'm not a gamer and this workstation is ONLY for editing. I use Premiere Pro CC 2014.x and always keep it up to the latest version.
    Since the 5960X is only clocked at 3.0 Hz. I'm concerned that editing and color correcting AVCHDs will be not as smooth as one would expect from a $1000 chip. The editing process is quite complex, with multiple video layers (all AVCHD, either 60p or 60i), picture-in-picture, color correction (mostly GPU-accelerated ones such as the Three Way CC and RGB Curves), and so on. It's not simple cuts and a few transitions. In fact, the work required on those AVCHD files is very much beyond what AVCHD is meant for but it is what it is.
    So, considering all that, would you STILL fork out the extra cash to get the 5960X versus the 5930K, and if so, why?
    I thank you in advance for your opinions and insight!
    Current planned system specs (highlights)
    - Win 8.1
    - 5930K or 5960X (help!)
    - Asus Rampage V
    - 32 Gb 2666 RAM
    - GTX 780 (possibly will invest in a Titan X 12 Gb if funds allow)
    - Intel 730 SSD (480 GB) for OS and programs
    - I will use my current set of 5-6 SSD drives for sources, scratches, misc pull files, exports
    Thanks again for your feedback!
    PS: I would like to emphasize again that the actual process of editing and color correcting AVCHD files is what matters most to me here rather than getting the absolute fastest encoding times.
    * I realize that both chips are unlocked and made for overclocking. I've overclocked for years but frankly, I was never that comfortable with it, lots of crashes and instability - and that was at low overlock levels of around 20% or less. I do not want manage overclocking or thermal management or worry about frying the chips. If at all possible I would like to run the chips at stock, or as close to stock as possible. However I'm also open to suggestions about that.

    Actually the 5960X will clock the turbo speed for all cores if you set it that way which is one of the things we do with our systems. All Intel chips that are not locked can clock to their turbo rating for all cores if set that way. Even without setting all cores to the peak turbo ratio they will turbo to a clock speed higher than base when all cores are active. It's just not the peak turbo ratio. That has to be manually set. Turbo occurs anytime the system load reaches beyond a low level regardless of what your doing. The system boards and bios effect that. You can also disable a setting in the bios and the system will always stay at it's peak clock ratio. The 5960X clocked at 3.9 will easily outperform the 5930K with all codecs due to the cores and cache.
    We can configure the systems with any hardware available in the market. However we cant include all those items on the website right now without making it far harder for people to configure systems. The hardware options we list are there because they are tested to work with the video and audio hardware/software and the reliability. We also support the systems as a solution for the life of the system. We have price the systems for that support which is part of the price difference. The options you are looking at wont have near the same support or expertise with the hardware and software together hence why your asking the questions here.
    Eric
    ADK

  • Looking for a "color pass filter"..Remove all colors but 1

    Looking for a "color pass filter"..Remove all colors but 1 or 2.
    FCP6 doesn't seem to have one.
    Anyone heard of one that works really well & that is fast to use?
    steve

    Jim,
    You are totally missing the point. I am an Adobe Premiere Pro instructor. I have been for 5 years. I added my 1st FCP system 2 weeks ago & am experiencing typical transitional curiosities as all who switch to other platforms & editing apps do.
    PP has a color pass filter. I was curious to see if FCP did. That sounds logical to me:) If posting the question about the possibility of there being a color pass plugin bothers you, well , that has to do with you.
    If you take a moment to read the prior correspondence, you might see my point.
    I think we can bury the hatchet now:)

  • Lightroom 4 won't save color correction to .R3D file

    Really didn't have problems until export. I'm amazed with how fast Lightroom plays playback on .r3d files. Anways after all the color correctrion is done I try to export the file to its original format (r3d) but upon playing the file in Red Cine-X, non of the color corrections I made are saved. It's as if I didn't edit the file at all. However if I choose to save the file as a H264 and play the file, all my corrections are saved. So it only doesn't work if I choose to export my file as the original R3d format. Anyone know whats wrong or how to solve this?

    Hi mikey,
    LR never writes to original files, and it does not do sidecars for videos.
    So in order to view your LR adjustments outside LR you need to use a format which LR can write to, like H264.
    Cornelia

Maybe you are looking for