REMOVING THE DISPLAY FROM A TITANIUM POWERBOOK

The display on my 15" Titanium Powerbook no longer works. The laptop works fine if I connect it to an external monitor. Does anyone if you can remove the display from the unit totally and still use the powerbook like a desktop computer connected to a monitor?

Welcome to Apple Discussions!
I have a friend who did the same with an iBook, and managed to get it to work. Given the trickery of how the cables are hooked up, if you are at all queezy, have an authorized service technician help you out. You wouldn't want to expose the wires to moisture and dust that normally don't get exposed.

Similar Messages

IPone 6, iOs 8.1.2 when removing the phone from the charging does not reflect the increase in the percent charge level , by reconnecting displays correctly

when removing the phone from the charging does not reflect the increase in the percent charge level , by reconnecting displays correctly

Addendum
Last night charging for around 3-4 hours only charged a dead phone by 55% then left it to charge overnight
Today the battery dropped from 6:15 am full charge to 53% at 10:38 am at time of writing this with
1 phone call out for 30 secs
1 incoming missed call,
Whatsapp fetched around 10 msgs
Email fetched around 20 ermail from 4 accounts but not viewed yet on phone

How can we remove the commas from the Formula value in SAP BW BEx query

Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.

Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere.

Is there any way to remove the duration from the course outline in Presenter 8?

Is there any way to remove the duration from the course outline in Presenter 8? I would prefer to not have that listed if at all posible and can't find a solution.

Are you talking about the Time Remaining display on the side bar? The text for that field is in the Modify Text Labels... tool in the Theme Editor of Presenter. You can change it to whatever you want, but you may want to keep a record of what the default text labels are, as there is no restore to default option. The Elapsed Time field is what you would want to change. I have seen this modified to show no text, copyright information or other general info.

How to remove the "0" from the sum cell when the other cells are empty?

Hello!
When I use the formula to sum the values from a few cells, there is a zero in the sum cell when the other cells are empty.
My question concerns how to remove the 0 from the sum cell when the cells that will be summed are empty.
Thank you!
/Johan Strömbeck

Hi,
Please try the Mr. Laurence's suggestion first. Then, we may try the other workarounds.
1) Go to Excel option> Advanced>Display Option for this worksheet> Uncheck Show a zero in cells that have zero value
2) Go to Conditional Formatting>New Rule>Format only cells that contain> Value equal to 0> Format the color with white
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support

Has anyone removed the stand from the monitor?

I love my 30" Cinema Display, but it sits too high on my desk, and find myself tilting my head up to see towards the top of the screen. I hate the thought of modifying the work of art that it is, but if I removed the stand, it would sit perfectly at eye-level. Obviously, I would have to make a stand/support to allow it to be free-standing. Either that or modify the desk itself. Has anyone tried removing the stand from the monitor? Feedback?

As NullUnit mentioned, it is quite easy to remove the stand but you will need the VESA adapter kit to replace it. This will give you the standard 100mm VESA mounting holes that you would then connect to any mounting arm you wish.
Personally I bought this MX Desk Mount Arm as it was rated to hold the weight of the display (~30#) whereas others were not (~18#). I originally mounted the display in a vertical/portrait orientation but the arm didn't go high enough so I had to mount a 6" block of wood to my desk first. I enjoyed the monitor so much that I have since moved it to become my primary monitor. The arm allowed me to lower the display all the way to my desk so I could just look over it (to watch TV). Couldn't have if it was still on the stand.
Hope this helps.

Vb scripts to remove the user from the member of perticular group (say from domain admin) from windows servers 2003 and 2008

Hi,
I need VB script which to checks the perticular user in AD and if it exists;that user needs to be removed from the member of perticular group
Ex:- Lets say
I have a user 783562 , I need to search this user in AD to verify user exists or not. If not then I no need to remove the mebership from perticular group
Second scenario:-
If user exists then I need to remove the user membership from the perticular group.I want to do it in automation
Manual Path:-
1.Type dsa.msc in run command of IT session(we using it to connect remote desktop).
2. Select the domain & right click (EX:-corp.ds.xxyyzz.com) and select "Find" to find the user form the domain.
3. Type the user name in the Name field and click on "Find Now" button user name will be displayed in search result.
4. Double click on this user ID and select "Member Of" tab.
5. Select any member of group from the Name section then click on "Remove" button.
6. Finally click on "Apply" and "OK" button.
Kindly help me out to do this by using vb script.
Thanks
Raja

Usage: CScript NameOfVBS.vbs //NOLOGO /User:Jane.Doe /GroupDN:CN=Group1,DC=Contoso,DC=com
Option Explicit
On Error Resume Next
Dim str_User
Dim str_GroupDN
Dim obj_Connection
Dim obj_Command
Dim obj_RootDSE
Dim str_DNSDomain
Dim str_Base
Dim str_Filter
Dim str_Attributes
Dim str_Query
Dim obj_RecordSet
Dim obj_Group
Dim str_ADsPath
Dim obj_User
str_User = WScript.Arguments.Named("User")
str_GroupDN = WScript.Arguments.Named("GroupDN")
If Len(Trim(str_User)) > 0 And Len(Trim(str_GroupDN)) > 0 Then
Set obj_Connection = CreateObject("ADODB.Connection")
Set obj_Command = CreateObject("ADODB.Command")
obj_Connection.Provider = "ADsDSOOBject"
obj_Connection.Open "Active Directory Provider"
Set obj_Command.ActiveConnection = obj_Connection
Set obj_RootDSE = GetObject("LDAP://RootDSE")
str_DNSDomain = obj_RootDSE.Get("defaultNamingContext")
str_Base = "<LDAP://" & str_DNSDomain & ">"
str_Filter = "(&(objectCategory=person)(sAMAccountName=" & str_User & "))"
str_Attributes = "cn,ADsPath"
str_Query = str_Base & ";" & str_Filter & ";" & str_Attributes & ";subtree"
obj_Command.CommandText = str_Query
obj_Command.Properties("Page Size") = 1000
obj_Command.Properties("Timeout") = 1
obj_Command.Properties("Cache Results") = False
Set obj_RecordSet = obj_Command.Execute
obj_RecordSet.MoveFirst
If obj_RecordSet.RecordCount = 0 Then
WScript.Echo str_User & " was not found"
Else
Set obj_Group = GetObject("LDAP://" & str_GroupDN)
str_ADsPath = obj_RecordSet.Fields("ADsPath")
Set obj_User = GetObject(str_ADsPath)
obj_Group.Remove(obj_User.AdsPath)
If Err.Number = 0 Then
WScript.Echo str_User & " was removed from group " & str_GroupDN
ElseIf Err.Number = -2147016651 Then
WScript.Echo str_User & " not a member of group " & str_GroupDN
Else
WScript.Echo str_User & " error removing from group " & str_GroupDN
End If
End If
End If

How to remove the frame from an ActiveX Web Browser window

I'm using a web browser window to display content from a web application in my LV front panel. I'd really like the content to appear as native parts of the front panel rather than being inside a frame. Is there a method that will allow me to hide or remove the frame from the ActiveX control? I've tried to make it a custom control and edit the decoration out but that does not seem to work.
Solved!
Go to Solution.

Quite right, in my 8.2 the web browser is already borderless (probably transparent). If your web browser window doesn't look good you should be able to insert it into the activeX one, the other should be a special case.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Removing the "Sent from BlackBerry..." message from email

Is there a way to remove the "Sent from BlackBerry..." message from email?

1. Login to you BIS site for your carrier. Carrier BIS login sites are listed here:
http://blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
OR you can login from your BlackBerry at the "personal email setup" icon.
2. Click on the "edit" next to the email account on which you wish to edit (or remove) the signature.
3. Where it says "signature", delete all text if you want NO signature, or edit the display what you prefer rather than "Sent from my BlackBerry..."
4. Click SAVE.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

[svn:osmf:] 16975: Fix bug FM-964, add media factory item for RTMFP multicast and remove the item from OSMFPlayer

Revision: 16975
Revision: 16975
Author:   [email protected]
Date:     2010-07-19 15:20:00 -0700 (Mon, 19 Jul 2010)
Log Message:
Fix bug FM-964, add media factory item for RTMFP multicast and remove the item from OSMFPlayer
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-964
Modified Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as
    osmf/trunk/framework/OSMF/org/osmf/media/DefaultMediaFactory.as

Welcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
    width: 220px;
    left: 180px;

How do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

I have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

You can turn iMessage off on your iPhone. That's relatively easy. Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one. For that answer you should probably contact Samsung support.

I have lost my phone IMEI Number 012546005322381, Serial Number 87******A4S, is there a way it can be tracked? Also, how can one remove the device from the itunes account

I have lost my phone IMEI Number 012546005322381, Serial Number 87******A4S, is there a way it can be tracked? Also, how can one remove the device from the itunes account
<Serial Number Edited By Host>

If you enabled Find my iPhone then you should use that. If not, I'm afraid you're out of luck for finding it.
To manage your devices, go to Your Account in iTunes.

HT1918 I was using a prepaid Amex card with iTunes and now the money is done. How do I remove the card from my account?

I was using a prepaid American Express E-Gift card with my iTunes account and now the money is done. How do I remove the card from my account?

Changing Account Information
http://support.apple.com/kb/HT1918
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

REMOVING THE DISPLAY FROM A TITANIUM POWERBOOK

Similar Messages

Maybe you are looking for