Rename User Code

Is there any safe way to change a user code? The problem is that user 'ABC' was given a license in one company. Then, another company was created with user 'abc'. The license was not allocated to this new user because of the uppercase/lowercase difference. However, we cannot create user 'ABC' in the new company because user codes are not case-sensitive in general. Is there any way to delete a user from OUSR or rename the user code? Or allocate the license for 'ABC' in company A to 'abc' in company B? Thanks for the help.

Hi Brian.......
Its not at all possible when the particular code is in use. Infact any of the codes can not be renamed once it is used.
But in order to achieve this you can lock these ABC and abc user codes and can create a new user in both the DBs and can share the same license..........
Regards,
Rahul

Similar Messages

Ssrs report web service to save report as pdf throws error Soap exception unhandeled by user code

I am creating a C# web application to save an SSRS report as a pdf file on my local machine.
I added the ReportService web reference as RS2005 and ReportExecution2005 web reference as RE2005.
http://myServer/ReportServer_DEVPROJECT/ReportExecution2005.asmx?WSDL
http://myServer/ReportServer_DEVPROJECT/ReportService2005.asmx?WSDL
I created the following function SaveReport that is called on button click. My report can be accessed on the report server with the following url:
http://myServer/Reports_DEVPROJECT/Pages/Report.aspx?ItemPath=%2fData+Mgmt%2fSample+Letter
On the Report Manager home page the report link appears as "SAMPLE LETTER".
It is deployed in the DataMgmt folder on the Report Manager.
It uses a data source called "DS Letter" with option "Credentials stored securely in the report server"
My application gets compiled, but I get the following run time error:
Error: Soap exception unhandeled by user code. The item '/DataMgmt/Sample Letter' cannot be found. ---> Microsoft.ReportingService
s.Diagnostics.Utilities.ItemNotFoundException: The item '/DataMgmt/Sample Letter' cannot be found.
Please check my code and let me know what I can do to run this successfully. Once this is done, I would like to get help with passing a parameter (memberID) to the generate report for that member, through this application.
Thank You in advance for your help.
public static void SaveReport()
RS2005.ReportingService2005 rs;
RE2005.ReportExecutionService rsExec;
// Create a new proxy to the web service
rs = new RS2005.ReportingService2005();
rsExec = new RE2005.ReportExecutionService();
// Authenticate to the Web service using Windows credentials
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
rsExec.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.Url = "http://myServer/ReportServer_DEVPROJECT/ReportService2005.asmx";
rsExec.Url = "http://myServer/ReportServer_DEVPROJECT/ReportExecution2005.asmx";
string historyID = null;
string deviceInfo = null;
string format = "pdf";
Byte[] results;
string encoding = String.Empty;
string mimeType = String.Empty;
string extension = String.Empty;
RE2005.Warning[] warnings = null;
string[] streamIDs = null;
string fileName = @"c:\temp\samplerHAPeport.pdf";
string _reportName = @"/DataMgmt/Sample HAP Letter";
string _historyID = null;
bool _forRendering = false;
RS2005.ParameterValue[] _values = null;
RS2005.DataSourceCredentials[] _credentials = null;
RS2005.ReportParameter[] _parameters = null;
try
_parameters = rs.GetReportParameters(_reportName, _historyID, _forRendering, _values, _credentials);
RE2005.ExecutionInfo ei = rsExec.LoadReport(_reportName, historyID);
RE2005.ParameterValue[] parameters = new RE2005.ParameterValue[1];
if (_parameters.Length > 0)
//parameters[0] = new RE2005.ParameterValue();
//parameters[0].Label = "";
//parameters[0].Name = "";
//parameters[0].Value = "";
rsExec.SetExecutionParameters(parameters, "en-us");
results = rsExec.Render(format, deviceInfo,
out extension, out encoding,
out mimeType, out warnings, out streamIDs);
using (FileStream stream = File.OpenWrite(fileName))
stream.Write(results, 0, results.Length);
catch (Exception ex)
throw ex;
protected void BtnGenReport_Click(object sender, EventArgs e)
SaveReport();

Hello Devster,
Thank you to post your question on TechNet forum.
After reviewing the whole post, I have a question to you. You can access the report via the link, http://myServer/Reports_DEVPROJECT/Pages/Report.aspx?ItemPath=%2fData+Mgmt%2fSample+Letter.
From the URL, I can see that the report is located at: /Data Mgmt/Sample Letter, instead of /DataMgmt/Sample Letter. In addition, I found that the target report is "/DataMgmt/Sample HAP Letter" instead of "/DataMgmt/Sample Letter" as the error described. I
am not sure whether you post out the correct code segment.
Please check the above things on your side, and hope it is helpful to you.
Regards,
Edward
Edward Zhu
TechNet Community Support

How do I configure an IP Printer that requires a user code?

Hi, I am using my Macs in a shared office environment where we have a Ricoh printer accessible via an IP address. The instructions for configuring the printer are written for Windows Vista and Windows XP users (sigh). I am able to add the printer by typing in its IP address, and I get a list of some printer options. But apparently this printer requires clients to log in with a user code before starting a print job and therefore my print commands from my Mac don't get processed. How do I do this from Leopard?
Thanks in advance for your help.

DXB Law wrote:
Yes, I am aware that it is my own IT management that requires the user code, not the printer,
I only mentioned it because there are many people that think it is all "the printer's fault" that they need a user code.
and my IT management has given me step-by-step instructions for how to configure Windows Vista to transmit that user code to the printer. But it seems that you are saying there is no configuration option in Leopard that allows for the transmission of a user code to a network printer?
I don't know enough about Windows to comment on the different way things are handled. In the case of the Ricoh printers, the user code is submitted with the print job. PCL printers include PJL data along with the job. For PostScript printers, Ricoh does supply drivers with printer extensions that allow for the user to input their user code via the normal user interface.
For non-PostScript network printers, Ricoh uses either a PCL 5 variant or PCL 6/PCL XL. There are several generic drivers for these printer languages, so users on most, if not all, other operating systems can print to the Ricoh printers. Further, Ricoh actually provides the PPDs for their printers that include all the extra functions (user codes, stapling, etc) that are available for a particular model. These PPDs get included in the OpenPrinting foomatic database. That way users of any system that can utilize the foomatic scheme will be able to print to Ricoh printers. This is not limited to Mac OS X. Foomatic supports CUPS, LPRng, LPD, GNUlpr, Solaris LP, PPR, PDQ, and CPS. It would be nearly impossible to write a specific graphical user interface for all the variants of Unix and Linux. That is why you must resort to editing a PPD file by hand.
You may be able to eventually help other Mac OS X users by letting Ricoh tech support politely know that it would be *most helpful* to have an easy to use user interface to input your user code. With there being more and more Mac OS X users, I hope they will do something to keep their customers happy.
Just remember, there are some manufacturers that still use proprietary printer languages for network printers. If they don't support your system, tough luck.
Matt

Change user's OU with punctuation mark doesn't work by Rename User View

Hi,
I have problem with moving user between OU by Rename User View when punctuation mark in name of OU is used.
I have own WF that assign user to specific OU depending on value of Select component. When value of this component is changed (against previous value) I call Rename View, that assign user to new OU. For OU without punctuation mark Rename View works OK.
After finishing WF with punctuation mark in OU this Error appers:
java.lang.RuntimeException: There is no such object on the server.
But creating new AD account (by role assignment) in OU with punctuation work OK. In select component is rule that replace puctional character in correct form.
Select component:
<Field name='slctOrganizationalUnitUzivatele'>
                <Display class='Select' action='true'>
                    <Property name='title' value='Nastavte organizacni jednotku:'/>
                    <Property name='allowedValues'>
                        <block>
                            <dolist name='zmena'>
                                <invoke name='listResourceObjects' class='com.waveset.ui.FormUtil'>
                                    <invoke class='com.waveset.session.SessionFactory' name='getServerInternalContext' />
                                    <s>OrganizationalUnit</s>
                                    <s>AD</s>
                                    <null/>
                                    <s>false</s>
                                </invoke>
                                 <rule name="RUL nahrada znaku">
                                    <argument name="inputString">
                                        <ref>zmena</ref>
                                    </argument>
                                    <argument name='hledanyRetezec'>
                                        <s>\,</s>
                                    </argument>
                                    <argument name='nahrazovaciRetezec'>
                                        <s>\, </s>
                                    </argument>
                                </rule>
                             </dolist>
                        </block>
                    </Property>
                    <Property name='sorted'>
                        <Boolean>true</Boolean>
                    </Property>
                </Display>
                <Default>
                    <upcase>
                        <ref>user.accounts[AD].ad_container</ref>
                    </upcase>
                </Default>
            </Field>
WF-Rename User
<Activity id='10' name='renameUzivatele'>
        <Action id='0' application='com.waveset.session.WorkflowServices'>
          <Argument name='op' value='checkoutView'/>
          <Argument name='type' value='RenameUser'/>
          <Argument name='id' value='$(user.waveset.accountId)'/>
          <Argument name='authorized' value='true'/>
          <Return from='WF_ACTION_ERROR' to='error'/>
          <Return from='view' to='renameView'/>
        </Action>
        <Action id='1'>
          <expression>
            <block>
              <set name='renameView.accounts[AD].identity'>
                <ref>newDNrecord</ref>
              </set>
              <set name='renameView.resourceAccounts.currentResourceAccounts[AD].identity'>
                <ref>newDNrecord</ref>
              </set>
              <set name='renameView.resourceAccounts.currentResourceAccounts[AD].selected'>
                <s>true</s>
              </set>
              <set name='user.global.OrganizationalUnit'>
                <ref>slctOrganizationalUnitUzivatele</ref>
              </set>
            </block>
          </expression>
        </Action>
        <Action id='2' application='com.waveset.session.WorkflowServices'>
          <Argument name='op' value='checkinView'/>
          <Argument name='view' value='$(renameView)'/>
          <Argument name='authorized' value='true'/>
        </Action>
        <Transition to='nastaveniPristupu-overeni'/>
        <WorkflowEditor x='193' y='343'/>
      </Activity>
<set name='newDNrecord'>
                <concat>
                  <s>CN=</s>
                  <ref>user.global.fullname</ref>
                  <s>,</s>
                  <ref>slctOrganizationalUnitUzivatele</ref>
                </concat>
              </set>Do you have any ideas?
Thanks Petr

Hi,
I discovered following:
- if name of OU in AD is without space (e.g. test,sample) so DN record is test\,sample and user is moved into this OU.
- if name of OU in AD is with space (e.g. test, sample) so DN record is still test\,sample and user isn't moved.
So problem is with empty space. How can I preserve space in DN name? I found something in documentation but I doesn't work for me.
+Special Characters in FieldValues
If you have a field value with a comma (,) or double quote (") character, or you want to preserve leading or trailing spaces, you must embed your field value within a pair of double quotes ("field_value"). You then need to replace double quotes in the field value with two double quote (") characters. For example, "John ""Johnny"" Smith" results in a field value of John "Johnny" Smith. +
(from IDM Business Administrator's Guide, p.77)
Guided this information I put value of slctOrganizationalUnitUzivatele into "". But this didn't work. Is good idea to have space in DN?
Thanks for help.
Petr
Edited by: petrklinkovsky on Sep 10, 2009 5:06 AM

S/C/D user codes

i want to register in pearsonvue.com for certification, while doing the registration, system asking for S/C/D user codes,
how i will get that number?
i wan to write exam in Dubai or kuwait exam center.
Is am doing the wrong way /
regards,
Sanju MS

Sanju,
????Stuck?!! Your diligence is....remarkable.
From the PearsonVue site:
If you have previously taken an SAP exam or attended SAP training, go directly to
step b, otherwise, customers and partners should access visit the Service Marketplace to
register for your S-user number. Independent consultants, as well as Customers and
partners having questions or problems regarding this step, should use the following contacts:
. * North America: Tel: +1 888 777 1727.
. * To register in Australia and New Zealand please complete SAP Educationu2019s registration form
. and SAP Education will send you a voucher for booking your exam via Pearson VUE.
. * For all APJ countries excluding Japan: education.apa at sap.com or tel: +65 62 708188
. * For Japan: training.japan at sap.com or tel: +81 3 3273 7070 (9:00-17:00 in Japan local time)
. * For all other countries please navigate to the appropriate country on
. sap.com/services/education and contact your local Education Department.
This is copied from http://www.vue.com/sap/ I paraphrased the addresses so that the forum post would be allowed.
If you are not a customer or partner, and if you have not already received an S number during one of your SAP education courses, then you are an 'independent consultant'.
Best Regards & Good Luck,
DB49

Add/Update Employee and put the ApplicationUserID (User Code) empty

Hello,
I'm trying to create or update an Employee master data but some times I need to put the user code as empty, when I'm trying to set it as 0 it's give me an error
Enter valid code [OHEM.userId]
When I put it as -1 it's updated successfully but when I'm trying to set another employee on -1 I get this error
The user is already associated with another employee [OHEM.userId]
Please advice it's really urgent

Yes that's right when adding there is no problem, but if I need to make update then what I should do if I want to set the user id empty?
if i have only one employee there is no problem the update success but if I have more than one employee I get this error:
The user is already associated with another employee [OHEM.userId]

Why do I get a "NullReferenceException was not handled by user code" error in one situation but not in the other?

We are using Sharepoint 2010 and Infopath 2010. In my form, I have a Managed Metadata field that I need to test for a Null value. I found, with the help of this forum's participatns, that a [field]_Changed event for one MMD field runs multiple
time because of the underlying XML elements (Terms, TermInfo, TermName, TermId). So I'm trying to figure out how to test the XML to see when the TermName has a value. By doing this, I hope to limit when the additional code in my form runs, i.e.
I'll only trigger it when TermName is not null.
Just to test for null/empty (before doing anything that calls the addtional code) when I run this code, it completes correctly but always shows a message box:
Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
But when I run this code, I get a "NullReferenceException was not handled by user code. Object reference not set to an instance of an object" at the "Dim strTest..." line:
   Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
Can any one explain why drilling down like this gives me this error? And can you tell me how to get around it so I can limit how many times the code in my Infopath form needs to run?
Thanks in advance. Carol.

Never mind, I think I've got it figured out. When I do it this way, I get to the If Not...Nothing at the correct time. Thanks for sending me down the correct path, Scott. Carol.:
Dim
firstStr As
String =
String.Empty
Dim xNav
As XPathNavigator = MainDataSource.CreateNavigator()
Dim xFirst
As XPathNavigator = xNav.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName",
Me.NamespaceManager)
If
Not xFirst
Is
Nothing
Then
Dim strxFirst
As
String = xFirst.InnerXml
                MessageBox.Show(
"Value of InnerXML   " & strxFirst)
Else
                MessageBox.Show(
"Empty or Null")
End
If

Where do I enter a user code for a shared office printer?

Hello All,
At work we have a shared printer and everyone has separate user codes so we can identify who prints what. In previous versions of Windows, there is a "Valid Access Tab" which leads one to a place where one can enter a Valid Access code, or
a user code, or a PIN, or whatever you want to call it.
I can not find a place to enter this number in Windows 8. Please help.

I can not find a place to enter this number in Windows 8.
On which version of W8? Others have noticed that some functionality related to printing is only available in W8 Pro. However, so far as I am aware nobody has bothered checking if that is only affecting the availability of GUI support or all support
for such functions. For example, I showed one poster that it may be that WMIC could be used to provide an alternative to GUI display and left it as a TBD whether that idea could be extended to control via WMIC as well.
C.f.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-manage-default-printers-does-not-appear/48a75424-7a3f-444c-bb40-9c432d7f9b0d?page=2
and that reminds me that there is even simpler access via Powershell. So who knows, maybe simpler control too? ; )
Good luck
Robert Aldwinckle

Setting the User Code for RICOH Aficio MP C 4000

Hi guys, initially I had trouble setting my office network printer. But the thread at http://discussions.apple.com/thread.jspa?threadID=2235451 helped a lot. Now I am still stuck as the office uses "user codes" for each of the staff but when I tried to set it up, i couldn't punch in any numbers as only 4 options were presented ie nos from 1001-1004.
I might be wrong but it seems to me that the user codes could be hardcoded in a text file somewhere. Question is how do I do that?
Thanks

so ive read and done everything on this feed. i also noticed that this question was marked at answered but it doesnt seem like the answer should be to hook into another printer.
im trying to print to my office printer, Ricoh aficio mp c5000, and im so close i can taste it but i must be missing something.
ive called applecare, ricoh, downloaded wayyy too many drivers, done everything in this feed and still nothing... well not exactly.
when i hit print the printer wakes up and makes noise but it doesnt pickup any paper or actually print. i can hear things startup and start spinning but nothing prints.
i know that for all the pc's that work on this printer, have to print in black and white or otherwise enter a Valid Access for color. I dont even see the option of valid access in the print settings.
also
i saw an option of finisher, option tray, upper internal tray, and internal shift tray. would those settings play a part as to why im not printing (using the Ricoh Aficio MP C5000 PXL driver)
Please help

Rename user's in Oracle 8i ???

This is possible ==> rename user's in Oracle 8i ???

You mean, renaming user: SCOTT to user: JOHN.
As far as I know, the answer is NO.
One of way to do the above is:
1. export owner=SCOTT.
2. Create user JOHN like SCOTT. You can set the same password using
ALTER USER JOHN ... etc. values clause.
3. imp fromuser=SCOTT touser=JOHN.
4. delete user SCOTT (making sure no objects belong to scott).
HTH
Srinivasa

User Code not avilable in User Choosefromlist

Dear all
i added User ( id : 12) choosefromlist to my edittext control. i couldnt able to see user code in choose from list.
with regards
Venkatesan .A

Hi,
This is very simple problem.
And don't know which method u r follwing.. any how i can tell u through screen painter.
in screen painter -> select new choose from list like CFL1
and assign object code
2. select text box & assign Chosse from list property as CFL1
3. assign table name (OCRD)& alis name (CardCode) (case sensitive)
& save it.
run screen painter preview mode...check it chosse from list..
Regards,
Avijit

Print Dialog box and User Code on Reader 10

Hello,
I recently updated to Adobe Reader 10 and when I go to print there is apparently a new adobe print dialog box. Which is ok except that it doesn't seem to get my user code info. When I print using the printer... button it prints fine. But if I push ok from the new adobe print dialog it causes an authentication error in the log on the printer. Is there anyway to put in my user code to adobe reader so I don't have to do this extra step? Can I turn off the new Adobe print dialog box and have it just go directly to the OS print dialog box like it used to?
Thanks,
dave

Can you tell us if you are using Windows of Mac OS? The Mac OS version of Reader has a Printer button on the bottom of the Print dialog box that brings up the standard printer dialog box.

One user code - two employe

Hi Friends
Can i assign one user code to two employe
thanks

Hi,
You can define Two user and they can use same code but when the one user makes mistake it is very difficult to track the particular user.
Regards,
C.Rajesh
Edited by: Rajesh Chandrasekaran on Jun 17, 2008 6:28 PM

Printing at Ricoh C3501 with user code

My MBP running below printer drivers for printing to Ricoh C3501 with user code.
foomatic-rip-4.0.6.230.dmg
gplgs-8.71.dmg
pxlmono-1.9.dmg
RicohUserCodes.command
As Matt Broughton recommanded before upgrade. The printing worked fine.
After upgrade to Yosemite, my MBP can no longer print on Ricoh c3501. Checking the printing queue, the print job is gone, but, actually, the doc is not printed.
This was happen if I select color print but using grayscale user code, but this time I select grayscale printing and using grayscale user code and still could not print as my MBP did before iOS upgrade.
After checking my colleagues, all the Mac in my company upgrading to Yosemite have the same printing problem.
Please help out what else I can do to fix the issue.
Thank you.
Bill

Hi Bill,
This video helped me out with my printing problem and maybe it will help you with yours. Printer/Scanner Help With Yosemite
-crazy

Rename User View

Hi,
I'm going to adopt user renames, using Rename User View, and automatic attribute derivation (like email addresses) is a must. Everything's working fine except changing attributes of the waveset name space (email, organization).
Here's the rule:
      <Rule name='Set Attributes for Rename'>
        <RuleArgument name='renameView' value='$(renameView)'/>
        <dolist name='resource'>
          <ref>renameView.toRename</ref>
          <set>
            <concat>
              <s>renameView.resourceAccounts.currentResourceAccounts[</s>
              <ref>resource</ref>
              <s>].selected</s>
            </concat>
            <s>true</s>
          </set>
          <cond>
            <ref>user.newLogin</ref>
            <block>
              <set name='renameView.newAccountId'>
                <ref>user.newLogin</ref>
              </set>
              <set>
                <concat>
                  <s>renameView.accounts[</s>
                  <ref>resource</ref>
                  <s>].login</s>
                </concat>
                <ref>user.newLogin</ref>
              </set>
              <set>
                <concat>
                  <s>renameView.accounts[</s>
                  <ref>resource</ref>
                  <s>].accountId</s>
                </concat>
                <ref>user.newLogin</ref>
              </set>
              <set>
                <concat>
                  <s>renameView.accounts[</s>
                  <ref>resource</ref>
                  <s>].email</s>
                </concat>
                <concat>
                  <ref>user.newLogin</ref>
                  <s>@domain.com</s>
                </concat>
              </set>
            </block>
          </cond>
        </dolist>
      </Rule>The problem is that the email address is only changing on accounts like Active Directory (account[AD].email), but the old value is still in waveset.email and global.email ('cause there isn't an account[Lighthouse].email attribute).
Is there a way to change these values too? It seems that it's no use inserting lines into the rule about waveset and global attributes.
Thanks,
Adam

check the workflows, forms, and views document. Its detailed there.
Note that IDM doesn not support domain moves...only OU moves within the same domain.
Dana Reed
AegisUSA
Denver, Co
[email protected]
"We are the Identity Company"

Rename User Code

Similar Messages

Maybe you are looking for