Renaming an existing House Bank

Hello All,
Based on new requirements, i have to change the name of the house bank from ABN to RBS. When using FI12, there is one House Bank id ABN00 having 2 account ids. FI12 only gives me the option to change the name of the bank but not the house bank id or the account id. Do i have to delete the existing entries & create new ones?
Thank you,
Anu Jose

Hi,
   we can not change the house bank ID once created. We can change Bank address and House bank data only.
we have to delete the current entry and create new one. Or create a new one and make sure that no one will use the old entry.
regards,
Balaji.

Similar Messages

  • FI12 Bank Account Reference Info field doesn't show for all house banks

    We are storing some information in the Reference info. field (T012K REFZL) for bank accounts. We have several house banks defined and this field is available for edit for the accounts for those house banks. We are setting up a new house bank, but the reference field does not show up so we cannot edit its value.
    I cannot find any config that allows me to define conditions that would affect the availability of that field. The only difference I can see between the new house bank, is it has a different country than the existing house banks. Existing house banks are in FR and PL, new house bank is in NL.
    Any help would be appreciated.
    Thanks,
    Ellen

    I received one other option from outside this forum that also solves the issue.
    Based on OSS Note 1009154 the below record has to be inserted into the u201CV_TFIBLSCREENu201D data view by using SM30:
    SAPLFHBANKC, 3, 002, NL, 3.

  • House Bank & PO Box

    Hi,
    Good day to you all;
    We have a requirement to print in the Customer Invoice details as to Bank Account and also its Postal Address, email etc;
    I have first a Basic Question: Which TCode is to be used for creating a (New) House Bank?
    Secondly, for existing House Banks, when I go to FBZP in "Address" there is no field for entering "PO Box" for example; But the "Adrc" Table does have values in PO Box field for some addresses while for others PO Box field is Blank;
    Now we want to update the PO Box for the "House Banks" for which PO Box had not been entered earlier; How to amend (or enter new) the PO Box?
    Please note this question is not regarding "How to create Bank Accounts"
    All help in this regard will be highly appreciated;
    Thanks in advance
    Regards
    Siddique

    Hi
    Create Houe Bank FI12.
    After enterign the Bank key press enter.  systems asks for bank data. enter the address.  after that enter Further address (F8) there u will have Postal Code.
    For existing Houe banks-
    Goto FI12.  Double click on House Bank and press change button.  you will come to bank data screen.  then click on further address (F8)
    ~Rajesh

  • HOUSE BANK-REG

    Dear Friends,
    I have  created a  new house bank  along with the existing house bank. 
    I have opened new gl a/c , and done fi12, fbzp etc.
    when i try make a payment to vendor thro this new bank.  it is not  being created.
    rather the APP run makes payment from the already existing bank.
    Can any one reply  for the same.
    c.m.sathish

    Dear Friends,
    The details of Bank  are being furnished in 1. Vendor Master, 2. In PO and  While making the Payment.
    Which  one has  got priority  while making payment.
    Thanks and Regards,
    C.M.SATHISH KUMAR

  • Wrong House Bank in Payment proposal of AAP?

    Hello Experts,
    We have more than 20 business areas and we have created individual house bank for every business area.
    In one of our Business area,when they are running AAP for a vendor to make payment(payment method-T),the Corporate house bank is coming as default in the payment proposal.
    I have configured every pair of house bank and business area in the ranking order of "Bank determination" configuration.
    Please suggest how can i change the house bank in the payment proposal?
    Regards,
    Sumeya Offrin

    Hi,
    Please follow the below steps to reverse a posting APP entry:
    1. Reverse and reset open item in T.Code FBRA
    2. Delete the existing payment (F110 u2013 Menu u2013 edit u2013 select payment run Delete)
    3. Delete the proposal (F110 u2013 Menu u2013 edit u2013 select proposal run Delete)
    4. Delete the parameter (F110 u2013 Menu u2013 edit u2013 select proposal run Delete). This is optional.
    Now you can either re-run the existing APP run or create a new one.
    Regards,
    Kiron Kumar T.

  • House bank selection while running payment run( FPY1)

    Hi,
    I am trying to post a payment run (FPY1) for open payables in FS-CD. There is an option to either manually enter the house bank details from which payment is to be made or that can be pre configured using the "maintain bank selection" criteria. Is it possible for the program to take the house bank details from the contract account (own bank details field.)
    Kindly let me know your thoughts
    Thanks

    Hi All,
    The "own bank details" entered in the contract account is used when the own bank is one of the banks defined in the Bank selection for payment program. You will observe this by giving a lower rank for the house bank/account id entered in the contract account.
    If you don't include the 'Own bank' as one of the banks but maintain any other house bank/Account id for the same payment method it will not make the payment. In this case the log will show that the 'own bank' does not exist in the bank selection.
    I hope this issue is clear
    Regards
    Venkat

  • House bank ID and acct ID are missing in mast.record for acct...

    Dear SAP Gurus,
    Please help out in the error that I am having here in FBWD for clearing accounts.
    I made payment with F110 for Bill of Exchange and Now I want to clear the amounts.
    1,

    Dear SAP Gurus,
    Please help out in the error that I am having here in FBWD for clearing accounts.
    I made payment with F110 for Bill of Exchange and Now I want to clear the amounts.
    1, How can I clear these amounts after payment with F110.
    2, what are the other ways to clear the amounts apart from FBWD.
    3, Error (1), the error that I am getting while trying to visualize the values with the account which is assigned to the house bank "House bank ID and acct ID are missing in mast.record for acct 11301246" Message no. FW024.
                                               though the house bank and ID exists in the system and accounts are assigned in the area OBVCU (FBZP) at "Bank Accounts" area. except the account the DISCOUNT ACCOUNT (G/L A/C is assigned)  in the FI12 at Bank accounts area.
    4, Error (2),  Retd bills exch. acct missing for house bank acct BBVA1 BBVAC (house bank &ID) and pyt method.
                       system response is : Bills of exchange is imported but excluded for further processing.
    thanks in advance,
    Yella Reddy

  • CHANGES IN HOUSE BANK

    Hi,
    In house bank it is not allowing to edit or add any address lines. Is there any provision to use the blank fields.
    Prakash.

    --What is House bank......?
    Answers
    House bank we call all accounts that belong to company. A house bank refers to the bank a company uses for receivables and/or payments. It is any bank with which your company code does business. Each house bank contains a companyu2019s bank accounts. It also contains a bank key that defines address and control data for the bank. The house bank establishes a link between the various G/L cash accounts and the actual bank accounts.
    2---What is bank directory.....?
    Automatically, if master data exists for the Bank Directory on tape or disk. ). Data can also be manually entered when creating a customer or vendor master record, a one-time account, or by directly creating an account.
    a---Bank Directory contain
    a---Bank Directory contains complete details about each house bank.
    3--where are bank master records created in SAP...?
    Unlike customer, and vendor master records, the bank master records may be maintained on the configuration side in SAP. They are also created on the application side in the Banking and Treasury sections.
    Bank configuration steps screen shot

  • Bifurcation of GL Accounts in House Banks

    Hi All,
    In definition of a House Bank we can have a main GL account for that particular House Bank and seperate GL Accounts for collections, payments, others, etc. They do not exist in the actual Bank but only exist in system for bifurcation of the transactions. But the balance of the main GL accounts needs to confirm with the actual Bank Account balance. But since there are seperate accounts for collections, payments, etc the balance of all the accounts will need to be transferred to the main GL account. I am not clear as to how this will happen. Will that be done manually or there are some settings in SAP which will do that activity?
    Thanks and Regards,
    Sameer

    Hi Sameer
    The basic purpose of having main, outgoing and incoming is to do BRS.
    Normally whenever you issue check you would credit the outgoing account
    same way you debit incoming account.  You can do the BRS manually or
    automatic BRS, provided your bank gives you statement in MT940 format.
    When you do the BRS all the checks debited by bank would be transfered
    to your main acccount and all the checks deposited by you and credited by
    bank would also be transfered to your main account.
    By this way, your bank balance as on last day of the month and main account
    balance would remain same till you do the next month BRS.
    The line itmes that are appearing in outgoing and incoming account are items
    to be reconciled, in short outgoing account shows checks issued but not debited by your bank and incoming account shows checks deposited but not credited by bank.
    To accomdate unexpected debit/credit by banks, you can have a separte GL account in SAP
    Regards
    Chandrasekaran A

  • Ranking order in House Banks

    Dear SAP GURUs,
    I would like to know how the ranking order in House Bank concept works?
    Kindly guide me.
    Thanks and regards,
    Vinayak

    Hi,
    Find below the process of Ranking in House Banks
    For each payment method, you have to specify which house banks are permissible and then assign a ranking order to the list of permissible banks. For each payment method/house bank combination, you specify via which bank account the payment is to be made.
    During the payment run, the payment program attempts to determine a house bank and a bank account for which the available amount is sufficient for the payment. The following results are possible:
    u2022No house bank is found that fulfills all the conditions, which means that the payment cannot be made with the method used to carry out the check. The system then checks the next available bank. If no bank is found, the payment method cannot be used. The next payment method (if one exists) is checked. This is recorded in the payment run log.
    u2022One house bank only is determined. This house bank makes the payment.
    u2022The system lists several house banks. The house bank makes the payment with the highest priority (in accordance with the defined ranking order of the banks).
    The payment run does not split the amounts. If the amount in a bank account is not sufficient for a payment, the payment program chooses a different bank account. If no other bank account is found from which it can post the total amount of a payment, the payment is not made.
    Hope it helps
    SJ

  • Paying company code house bank

    Hi,
    Following might be basic query. I have searched in SCN forum, but not found any solution.
    Paying company code is different and house banks of paying company code is given in ranking order.
    Please let me know how can I override the ranking order and make the payment with different house bank exist in paying company code.
    I cannot assign the paying company code house bank in sending company code vendor master data.
    I do not want to change in proposal.
    Please advise.
    Regards
    Shanid

    Hi,
    I think I have provide the access to user for the t.code S_ALR_87001486 (available amount change).
    Whenever user want to use other house banks, then can change the available amount of rank 1 house bank to zero.
    Any other thoughts?
    Regards
    Shanid

  • Bank Accouts in House Bank

    Hello All,
    I am having problem while creating bank accounts in house bank with FI12. it give such error like
    ' Entry AIL XXXXX  does not exist in SKB1 (check entry) ' although i have checked all entries.
    Please revert back.
    Regards,
    Swapnil Vaidya

    Hi,
    The meaning of this is the GL Account is not createdin the said company code.
    Create the GL Account with the Transaction Code FS00. Then maintain it in the House bank.
    Regards,
    Amit

  • Cannot amend Bank account in House Bank Accounts-setup

    Hi,
    Customer is using 2007A PL30
    With recent bank merging, a new bank account had been given to its customer. As such, customer would like to amend Account No field in House Bank Accounts-Setup but hit errors "Fields cannot be updated" Customer would like to continue posting into same G/L account for both incoming and outgoing payment history and bank reconciliation process purpose.
    Regards
    Thomas
    Edited by: Thomas Lai on Mar 4, 2009 10:27 AM

    A new bank account has to be setup.  You should not let customer to change their exist code.  A history has to be kept untouched for all financial records.
    Thanks,
    Gordon

  • House bank account & suspense account

    Hi all,
    Is it possible to make a normal G/L account as a house bank account when some postings are already made in that G/L?
    Also, how to create a suspense account and link it for payments to the house bank account.
    Thanks in advance.
    Stalin.

    Hi Stalin,
    Using an existing GL to be the main Bank Account for your House bank is not an issue as system will not stop you from using it, but please check for the following..
    1) If you are making it the Main bank Account, then it should not be open Item managed.
    2) Secondly, if it has balances already then either make postings and make it Zero, else the balance will not tally with the Bank Statement balance.
    Technically, it is not an issue at all..
    Regards,
    SAPFICO

  • House bank account ID

    Hi!
    I faced a problem while posting FI document - I can enter House bank in it, but I cannot enter House bank ID.
    I checked field status for GL account, the field House bank stands as optional.
    Looking forward for help!

    Hi Nadezda Zanevsk... 
    Very good to see your Solution message .
    I am facing the same problem after updation of my SAP pach level. Before that activity i have no problem with House bank account id the system post it properly.
    Now after upgradation of the patch level the system gives me  Field BSEG-HKTID. does not exist in the screen SAPMF05A 0332
         Message no. 00349
    Diagnosis
         The specified field does not exist on the screen.
    Procedure
         Check your batch input data.the following error details.
    Solution: SAP suggest me the same only activate RE-FX compnent note. i.e SAP component Financial extension.
    Where as we are not in the real estate business.
    Is there any problem while activating the RE-FX component. or any other sugessions for resolving the issue.
    is there any posibility to deactivate the RE-FX once it is activated.
    Thanks for your cooperation.
    REgards,
    Laxminarayan

Maybe you are looking for