Render Manager Prompt - How to proceed?

Hello All,
This novice question comes from veteran experience in doing the wrong thing. When I first got started with FCP, I had a message about the capture scratch being full. So, not knowing any better (well, actually not knowing anything), I trashed the file. Eek! Those emotional and logistical scars are just about healed.
Anyway, my question now is this. I'm getting a message stating that I need to manage my render files. The message recommends that I open render manager. The choice is, "Check in the Remove column to dele unwanted render files or free up disk space.
What to do?
DG
Message was edited by: djonathang

Under Final Cut Pro > System settings, the first tab is labeled scratch disks. Make sure that video capture, video render, and audio render boxes are checked. Click the "set" button. this is where you set the destination for your external drive. It's best to just point it to the drive.(not a folder in the drive) FCP will create the necessary folders for you and keep your projects media organized by project name.
--Bob

Similar Messages

I changed my Apple ID and password, but when I attempt to update Apps I am prompted to enter my Password for my OLD Apple ID, and I am unable to override the Old Apple ID. How to proceed ?

I changed my Apple ID and password, but when I attempt to update Apps I am prompted to enter my Password for my OLD Apple ID, and I am unable to override the Old Apple ID. How to proceed ?

Delete everything bought with the old Apple ID and buy it again.
Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

FCExpress Render Manager .... How do I 'manage' render files?

How can I easily delete rendered files in FCExpress HD v3.5?
(Other than traipsing into the Finder, hunting down the render files, "Guessing" which render "file(s)" are the ones I want to delete, then delete them (only to then get the "you're missing files/media" dialog box)
I had set the sequence settings to 50% & 50% on the render and resolution for editing. I now want to 100% & 100% the sequence for the Final Cut (pun intended), there doesn't seem to be a mechanism in FCExpress HD v3.5 to delete just that sequence's render files.
Changing the sequence settings doesn't "clear" current renderings under the former settings.
Background:
Thing is, I upgraded my hardware to an iMac Core Duo 17" and "downgraded" my video editing software from FCPro HD v4.5 to FCExpress HD v3.5.
Good news is, all my FCPro HD v4.5 files "upwardly" converted to FCExpress HD v3.5; hmmm... FCExpress v3.5 is "newer" than FCPro HD v4.5 .. works for me!
The flustrating news: FCExpress (including HD v3.5) doesn't seem to have a Render File Manager option as such FCPro has the Render Files Manager to manage rendered files; specifically, you can choose to delete rendered files so you can r-erender.
Apple, I had better not have just spent tons of money to be forced to have to switch to the Finder to hunt down and guess which render files belong to the specific sequence I want to rerender.
iMac Core Duo 17"; 1.5GB Mac OS X (10.4.6)

As far as I know there is no render manager in FCE however as you rightly note every time you re-render a clip it replaces the old render file.
Further, ANY change you make to a rendered clip requires the file to be re-rendered (with the notable exception of changing preference settings as there are not clip specific).
Thus a workaround: Make an entirely irrelevant change to the clips in your sequence (like a 10% opacity shift. Render the sequence. Change it back to 100%. Re-render.
My assumption is that the clips will re-render with the new preference settings.
Unless there is a better way?
M.

Bit by Mountain Lion's Time Machine bug - how to proceed best in the simpler cases?

My MacBook Air mid-2012 had never been updated to Mavericks. I had backed it up just a week before a big coffee spill that killed it (June 2014).
I finally got a replacement never-before-used 2012 Macbook Air running Mountain Lion (great to make the Time Machine restore seamless).
That's when I tried "Restore from Time Machine" and it showed the "last full backup" as being from June 2013!!! Then in Migration Assistant, couldn't locate my disk. I've been bitten by the "Exclusion" bug and my Library/ Applications / System folders have not been backed up since a year ago. I'm one of the ones that "found out after it was too late."
So I'll try the workaround. Thanks to Pondini for his great website:
http://pondini.org/TM/D10.html
http://pondini.org/TM/D10r.html
My plan is to restore from Time Machine to my 2013 full system.
Then swap out the Users folder to bring it up to date to the June 2014 version that I have backed up.
Luckily I have only one user account so this can't get TOO complicated.
After that, I'll reset Time Machine and check it periodically via the Command-R trick to make sure it's backing everything up fully.
Still, I'm left with a few questions/concerns that I'm hoping Pondini or others can help to allay before I proceed....
-What will I have lost in a year from those folders that did not back up? I know I may have lost non-Mac applications that I downloaded and also any software updates to said applications. What problems might I encounter in the way of error messages, etc.? I feel like i don't understand the contents of these folders well enough to realize how in trouble I'm in (or not) regarding these folders being out-of-date by a whole year.
-Is it really as simple as swapping out the Users folder on the new system with my most recent backup from June 2014? Any hiccups I should expect from this process? Will all of my photos go back into iPhoto? Will all of my mail files go back into the Mail app? Or in these cases, is there something I need to initiate to smooth out this process? Photos and Mails are the two big concerns; as for the other stuff, I have yet to find out if it's relevant until a problem occurs.
-Once I have restored Apps/Systems/Library to the 2013 backup and Users to the 2014 backup, then what? I'll reset Time Machine but then should I assign it to the new computer? Should I tell it to inherit the new computer? Should I wipe it clean and start fresh? How to proceed after so that I don't have more and more problems down the line, and hopefully don't lose any of the data that I at least have managed to save/restore up to now...
Thanks in advance for any help and sorry if I'm not more clear; I'm not so technologically literate so I'm not sure how best to phrase these things to get my point across.
And special shout out to Pondini who made the discovery of this bug a lot easier to stomach thanks to your helpful website.

A clone is an option.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Commonly Used Backup Methods

Adobe photoshop lightroom keeps crashing. how to proceed?

I am installing lightroom from a dvd.
I have managed to download the 1.1GB file from the DVD to the computer on the applications.
Computer Specs:
MAC BOOK PRO
PROCESSOR 2.9 GZ
intel core i7
MEMORY 8GB
OS X YOSEMITE- VERSION 10.10.1
However, when I try opening them on my Macbook Pro, it crashes.
I have not yet had the opportunity to even enter the serial code number.
How to proceed?

Hello,
sorry, I am not an Mac export therefor my hints may not be helpful...
LR does not need Java. LR needs only QuickTime.
Is this your first LR installation?
Try to remove (rename) the Lightroom Preferences file. It is located in you home folder (/Users/[user name]/Library/Preferences/com.adobe.Lightroom5.plist). Perhapst there is some wrong values stored in the file.
Did you try to start Lightroom with the same user who installed Lightroom?

HT201328 Bell unlocked my phone for me. their next step was for me to connect my iPhone to itunes. I downloaded iTunes and am now stuck about how to proceed. HELP!

Bell's next step was for me to connect to iTunes. I downloaded iTunes and can't figure out how to proceed from there. The basic info in the Apple site for "unlocking" only addresses a SIM card that doesn't work. My SIM card is correct. How do I go on from here? Thanks,

Bell should have given you instructions, but in case they did not here is what you do:
Put a Bell SIM in the phone. It does not have to be a currently active SIM, but it must have worked on Bell at some time in the past.
Connect the phone to your computer with the USB cable.
It should appear in iTunes. Click on its name.
Click the Backup button.
Click the Restore iPhone button. When prompted to restore the backup choose that option.
The phone will reload iOS. If your current iOS version is not 7.0.4 it will update to this first. If that happens when the update finishes click Restore iPhone again.
If the process succeeds you should see the message: "Congratulations. Your iPhone is unlocked". If you don't get this message wait a couple of days and repeat the whole process again.
Note: to unlock the phone you do not have to Restore as New. Restoring and reloading the backup will work also.

How to Proceed oracle database 10.2.0.4 with OID 10.1.4.0.1

Hi,
We have Oracle Metadata Repository version 10.2.0.4 and our Oracle Identity Management version is 10.1.4.0.1
While installing/configuring OID 10.1.4.0.1 we are getting the below error.
"You must have an OID schema version 10.1.4.0.1 to 10.1.4.9.9.Please select another Metadata Repository or upgrade the OID schema in this Metadata Repository to a compatable version."
Is it possible to have oracle database 10.2.0.4 with OID 10.1.4.0.1?
How to proceed further?

Hi.
We have installed Metadata Repository on the Existing database using RepCA
During installation of Oracle Identity Management we are getting the below error
"You must have an OID schema version 10.1.4.0.1 to 10.1.4.9.9.Please select another Metadata Repository or upgrade the OID schema in this Metadata Repository to a compatable version."
Here there are some of the details from metadata repository database
SQL> select * from INTERNET_APPSERVER_REGISTRY.components;
PRODUCT COMPONENT_NAME COMPONENT_VERSION
Metadata Repository Container mrc 9.0.4.0.0
SQL> select comp_id,version,status from app_registry;
COMP_ID VERSION STATUS
SYNDICATION 10.1.2.0.2 VALID
PORTAL 10.1.2.0.2 VALID
SSO 10.1.2.0.2 VALID
WORKFLOW 10.1.2.0.2 VALID
B2B 10.1.2.0.2 VALID
BAM 10.1.2.0.2 VALID
MRC 10.1.2.0.2 VALID
OCA 10.1.2.0.2 VALID
OID 10.1.2.0.2 VALID
DCM 10.1.2.0.2 VALID
DISCOVERER 10.1.2.0.2 VALID
COMP_ID VERSION STATUS
WCS 10.1.2.0.2 VALID
UDDI 10.1.2.0.2 VALID
WIRELESS 10.1.2.0.2 VALID
14 rows selected.
From the above query we see that OID version is 10.1.2.0.2 and we have to upgrade the OID schema version to 10.1.4.0.1.
Can you tell us how to upgrade the OID schema version and with proper document to follow?
Kindly update for any output from my side
Thanks

Azure Enterprise Agreement: How to proceed then ?

Hi All,
My customer has recently acquired an Azure Enterprise Agreement : Server and Cloud Enrollment (SCE)
The contract is visible and active in VLSC
Now, how to proceed ? How to connect to Azure and Create subscriptions....
https://nirajrules.wordpress.com/2013/09/12/windows-azure-portals-and-access-levels/
http://blog.thavo.com/2014/05/where-to-start-with-microsoft-azure.html
We followed this to connect to the Azure Enterprise portal, but no customer account has been valid (https://ea.azure.com/)
Please, how to proceed ? Which account to use, is there any further steps ?
Regards, Samir Farhat Infrastructure and Virtualization Consultant || Virtualization, Cloud, Azure ? Follow and Ask here https://buildwindows.wordpress.com

Hello,
As your client has acquired an EA agreement and as is active, he would have received an activation e-mail from EA team which has an option
to activate and become the Enterprise Administrator.
The Enterprise Administrator will have to login and activate the user for super access. Once it is complete, EA Admin will be able to add Azure
account / E-mail addresses by selecting the appropriate authentication method to activate EA subscriptions.
If you need assistance in activating, I recommend you contact Azure subscription Management team by creating a service request
here.
Regards,
Shirisha Paderu

How to proceed After blocking the delivery.

Hi SD Experts,
i have a doubt how to proceed after blocking a delivery. My scenario is this " i created a sales order and blocked the delivery of it. So i cant able to create a delivery for that sales order." . Then what should be done to create a delivery for that sales order ( i.e. How to release the Blocked delivery status and to create a delivery)
with regards ,
James
Valuable answers will be rewarded....

Definately Vasanth,
          it will work.
Mostly billing block will be used in Credit/debit memo's.
Only the authorized user can remove the block in VA02.Then user can able to create billing.
This wont happen in Credit management issue,because we wont maintain any billing blocks in credit management.
block in credit management like:,
sales order level-
         ( 2 release the Credit mgmt block in Sales order- VKM3)
delivery level -
         ( 2 release the Credit mgmt block in Delivery doc's - VKM5)
*( 2 release the Credit mgmt block in Sales doc's & Delivery doc's at a time - VKM4)
at the time of Goods issue
Hope it adds the information .
reward point if it helps u

My iPad 3 microsim card slot is stuck or jammed. Manually cut micro sim is stuck inside the slot. I can't open it. How to proceed?

My iPad 3 microsim card slot is stuck or jammed. Manually cut micro sim is stuck inside the slot. I can't open it. How to proceed?

If they can't extract the SIM without opening the iPad (which no service center is authorized to do), and you can't manage to get it out yourself, then you'll probably have to pay Apple's out-of-warranty replacement price and get the iPad replaced. Use of a cut-down SIM is not covered under warranty.
Regards.

Render Manager says Rendering Full, but Nothing in Folder

I imported a LiveType movie about 3 seconds long with background and text. Nothing major.
FCP 6 tells me I need to render the clip. When I do I get an insufficient memory for render message. It asks me if I want to run Render Manager and free up space. When the Render Manager window pops up there is nothing there that I can delete.
I need to correct the problem or make more space for the render file. How do I do either. Help! Deadline is tonight and I am panic ready.
Ireallywanttodirect

okay, you may have elements in your composition that cannot be rendered because they are too big or the wrong format. So, the next question is, do you have any still images in your sequence? If yes, make sure they are RGB and not CMYK. You can check in the browser or open the images in Preview to find out. Also, if they are RGB, what are the dimensions. If they are straight from your digital camera they may be too big for the comp. Not file size mind you, frame size. Rescale any images that are too big and try to render again.

Where is my Render Manager

Hi,
I am using FCP 5 on mac G4. After the last Update of Pro App Support, i cant see my Render manager in Tools menu in FCP 5. Anybody know how this happens?
Thanks.

not heard that one before.
usual troubleshooting steps apply i should think ...
at the OS level start by repairing permissions (/Applications/Ultilites/Disk Utility)
in FCP try trashing your FCP preferences with FCP Rescue (from http://fcprescue.andersholck.com)
try creating a new user account in your OSX System Preference >> Accounts pane
then log in to that new account and see if the problem is resolved
afterthat you're heading in to full fresh install territory (OS and Apps)
for what its worth, clean installs, full clones before any upgrades and all that jazz is always the recommended practice

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

When you went back to the place where you purchased this phone, & asked them, what did they say?
No one here can help you with this, nor can/will Apple. You need to take this up with whoever you purchased this phone from.

I cannot download Lightroom CC because it does not show up on my Creative Cloud Application Manager. How do I fix this?

I cannot download Lightroom CC because it does not show up on my Creative Cloud Application Manager. How do I fix this?
I have Windows 8 and am currently using the entire Adobe Suite Package for my account.

do you have a 64 bit os?

HT4528 I cannot sync my phone to my computer because I am getting the error message "The iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I did not upgrade my iTunes. Any suggestions on how to proceed?

I am getting the above error message in the subject line and do not know how to proceed. Thanks.

See Empty/corrupt iTunes library after upgrade/crash.
tt2

Render Manager Prompt - How to proceed?

Similar Messages

Maybe you are looking for