Reoroder point not calculated
Hi Gurus,
can anybody please help me dubug on why the system is not calculating the reorder point in SAP. This is for HIBE materials. These do not go in BOM. we have provided the historical periods and forecast periods. But for some reason the reorder point is not being calculated and not even the forecast is being calculated. I ran the tcode MP38 to execute the forecast. Any ideas to debug this and find out what could be wrong. These materials are MRO items. The MRP type we are using is a Z2 MRP type which is copy of VM MRP type and the only new thing in our MRP type is that it has PM network/activities checked on in the cnfig. That means it should also take into account the reqs coming from PM.
ANusha
Edited by: anusha vemulapati on Mar 11, 2011 8:07 PM
check this section in SAP Help :
[Things to Think About Before Carrying out the Forecast |http://help.sap.com/erp2005_ehp_05/helpdata/EN/7d/c273ba454011d182b40000e829fbfe/frameset.htm]
Similar Messages
-
Cess on TDS is not calculating at the time of posting F-47
Dear All,
Cess on TDS is not calculating at the time of F-47 (vendor Down payment Requst)
Mean system is deducting TDS amount only, not deducting Cess amount on TDS . at the time invoice posting Cess & TDS calculating in this company code (1111)
But in other (2222) companycode,system calculating cess on TDS at the time F-47 . both company codes under the same system. if we apply perticular notes on above issue is there any affect to other (2222)company code settings ?
Plse give me advise urgant.
RajaHi
In the withholding tax settings Define Withholding Tax Type for Invoice Posting
and Define Withholding Tax Type for Payment Posting for CESS ,check whether you selected in <b>calculation part</b>: tax amount as base for calculation and selected inherit base.
If this is not done system will not calculate the Cess.
Regards
Aravind
Assign points if useful -
Hi,
While making the downpayment to the vendor using Tcode F-48, WHT is not calculating.
Solution Pls
Rds
sunficoHi
It seems while doing the transaction f-48, there is no pop box coming for withholding tax. Because for payment we never assign withholding tax code in the vendor masters. However only assign Withholding tax type for payment and click on liable. (Withholding tax type and withholding tax code for invoice will be always there).
Now go to Field status variant in that Select G026 say u r using for down payment account. In that withholding tax type entries will be supress. Make them optional.
Now in general ledger of the bank check whether relevant to cash flow has been checked or not.
Now when u make the entry for downpayment system will give u pop box for withholding tax. There mention witholding tax code for payment and enter
Now when u simulate the transaction it will show the tds amount deducted.
If click on document overview it will not show you tds amount deducted.
Rewards points if u find useful. -
TDS not calculating at the time of advance payment to vendor
hello gurus,
need urgent help ,
TDS not calculating for advance payment made to vendor, checked configuration in detail. payment WT type is marked as central invoicing prop.all other config is o.k.
regards,
AnandHi Anand,
Mark the WT type as No central invoicing. U can still deduct TDS. Central Invoicing concept is mandatory only in Argentina.
what u have to do is, configure the WHT code and the WHT type for "Define Withholding Tax Type for Payment Posting".
Then include the same in the vendor master in FK02 under "withholding Tax accounting" tab. mark it as liable.
these settings in the master are enough.
then when u run the f-48 for downpayment, after entering the details in the first screen and u press enter, the system will give a msg that the vendor is liable for WHT.
this is how u can do it.
award points if helpful.
Regards,
CA. Karthik Narayan N S
SAP-FICO Consultant -
Shipment cost not calculating on VT01N
Hi Gurus,
I have configured the shipment cost configuration in all the relevant areas of Transportation node but still Shipment Cost is not calculating in VT01N.
Following configuration has been done:
Define Routes
Define Modes of Transport
Define Shipment Types
Define Transportation Connection Points
Route Determination
Define Routes and Stages
Define Transportation Zones
Shipments
Maintain Transportation Relevance
Define Shipment Types
Shipment Costs
Basic Functions
Define Data Rules
Define and Assign Tariff Zones
Shipment Cost Document
Shipment Cost Types and Item Categories
Shipment Cost Relevance and Default for Shipment Cost Type
Pricing
Define Condition Types
Define and Assign Pricing Procedure --- here I am using the Standard Pricing Procedure
SettlementAssign Purchasing Data
I have maintained the condition record in TK11.
Please let me know If I have missed any other steps.
Also please let me know the sequence in which the pricing will be picked up.
Quick action Text Removed
Regards
Message was edited by: G Lakshmipathi
Please dont add such text in your postHi Moazzam
Actually I am not a new member, just created a new ID. Unfortunately I have lost my old id .
I did search Google and SCN from the last two days before posting this discussion in SCN. Some of the good links which helped me for the configuration are:
Standard Shipment Process
Shipment Cost Processing - Delta - TD - Transportation and Distribution - SAP Library
Transportation Configuration and Process Flow - ERP Operations - SCN Wiki
Shipment cost
Shipment cost basic configuration...
Transportation (LE-TRA) - SAP Library
Shipment cost - VI01
Net value is zero when creating shipment cost
ETC...
Currently get the SDTRA.PDF document which I am reading .....
Infact after reading all the document I still unable to understand the proper technical flow required for shipment cost calculation.
Please share me your concept, it will be helpful for me.
Regards -
Tax is not calculated in PO but showing in PO Print Out
Hi,
I am facing a PROBLEM OF tax is not calculated but it is dispalying in PO Printout.What is the reson ? I have maintainrd J1ID settings correct eventhough ED @ 16% IS NOT calacualting ?
It would be gerat help if anybody would help me suitable points will be rewarded.I had created SB Input Tax Code ED 16%,Ecess 2%,SHECess 1%,CST 3% and the system is calculating only the 3% of CST only but it didnt calaculate the ED portion.I ahd maintained the J1ID settingd for this material and vendor correctly why this is happening ? Plz give me the answer if anybody knows becz it is very very urgrnt yo resolve this issue.
Thanx -
Pension not calculated when EE is hired mid-month
Hi All
Please suggest for the following....
When an Employee is hired in the middle of the month, the system doesn't calculate Pension Contribution.
Like if an EE is hired on 10th April. The system will calculate all payments & deductions, but it is not calculating the Pension Contributions.
I am maintaining IT 169, 171 for Pension Contribution.
The problem I found behind this is.....(WIth the help of an ABAPer)
-: System checks the Payroll Period Start Date with the Org. Assignment start date. When it doesnu2019t match, the system does not calculate the Pension Contribution.
For the time being I solved this through the following action -: In debugging, I canceled this condition (skipped this check). Then it calculated the Pension Contribution.
But, this is not the right solution for achieving that as we are changing standard SAP coding.
Please suggest any solution for the same.
Thanks & RegardsIf your schema has p0169 with BEG that will happen, try put below Param1 which fits your requirement.
BEG
Infotype records are evaluated on the payroll period begin date.
No changes within the current payroll period are taken into
consideration.
No proration of contributions takes place, even if the record ends
within the current payroll period.
END
Infotype records are evaluated on the payroll period end date.
No changes within the current payroll period are taken into
consideration.
No proration of contributions takes place, even if the record begins
within the current payroll period.
CHK
Infotype records are evaluated on the payroll check date (the pay date),
regardless of whether the check date falls into the payroll period
itself.
A record whose validity starts after the end date of the current payroll
period is still evaluated if the check date (which lies in the future)
falls within the validity period of the infotype.
FRST
Infotype records are evaluated if there is any intersection of plan
infotype and payroll period. The first intersection is taken to
determine the full period deduction amount which is stored without
proration.
LAST
Infotype records are evaluated if there is any intersection of plan
infotype and payroll period. The last intersection is taken to determine
the full period deduction amount which is stored without proration. -
When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.
-
Due date not calculated in F-28
Hello,
Can anyone tell me if in standard SAP, in F-28 (incoming payment) why the due date (or payment date) is not calculated ?
I fulfilled posting date and document date (both 01/09/2009) and payment terms also (Z100 - 90 days end of month), but after saving the document and when i check it in FB03, i found that payment date (or due date) still 01/09/2009 and not 30/11/2009.
Can someone explain why and in which cases SAP dosn't calculate the due date ?
In advance, thank you for helpHi,
The transaction F-28 - Incoming payment, in general it is used for receiving payments. Then what is your requirement to calculate due data from posting date of this document. Are you referring to value date in the bank item? The due date will be calculated from baseline date in invoice, in this case you need to check the baseline date in the invoice (open item), right?
Correct me, if my understanding on your requirement is wrong.
thanks,
Kumar -
Overheads not calculated in CK11N cost estimation
Hi all,
I have two issues
1. When i am executing CK11N,i am not able to get the overhead calculation in itemization,but its showing some ridiculess firgure in cost component structure.I am using dependency D020.
2 . when i am using dependency D050 the system not calculating overheads.
We have single plant with two process Repetative and Process order.I want to calculate the overhead on the Order type basis but the system is not calculating the overhead.
So i changed the dependency to D050,now its showing the overhead figure in cost component structure but whic is not matching with the overhead rate i have given..
as my go live is 20 of this month .....its bit emergency
Revert
Regards
PranHi all,
Thnx for your reply.
But i have maintained all the entries in the respective area,even though i am geeting the issue.
It was working fine for my previous repetative manufacturing ...i am using the single cost sheet for both repetative and process order.
And one more thing is that i have a Semi finished goods which is the output of REIM order and is included in process order of the finished good.
The system is calculating the overheads for the semi finished good too once again.
Eg,
Raw Material A and B produces Semi finish material C overheads and the utilities are calculated correctly in Repetative manufacturing.
The semi finished material C is used in producing the finished material D ....in which the system is not caculating the utilities.The big problem is that the figure(value) of itemzation and the Cost component structure is showing two different values.
I am not sure and able to know how and why the system calculates and from where it gets these values ...... totally confussed and under pressure (may not be able to to explain properly).
Revert
Pran -
Depreciation not calculated and posted
Dear All
I have a problem. Actually we had a legacy data transfer last year in the month of March.
All the assets were posted to new company code fronm the old company code by using an initial clearing account.
the entries were done through f-02.
My problem lies in the fact that 4 assets which were posted at that time are not functioning well.
The balances got transfered as opening balances in Aw01n but there is no planned depreciation for them for the year 09-10.The amounts are coming as " zero" in the planned depreciation tab.
As a result of which my asset acquisition reports are not coming correct.
I have figured out the diiferences..
The differences are regarding these 4 assets only.
Could any of you please help me in finding the reason why the depreciation is not calculated on these assets since April 2009 and how they are appearing "ZERO" in the acquistion report when there is a actual balance in the asset
Thanking you
regards
RubyHi
I have checked the asset in the previous company code also.. All the parameters are same..plus in that company code the sysytem has shown the planneed depreciation too for all the assets.
now I think the problem lies in the depreciation key or in some linking between depreciation key and the asset..
have you any clue about the areas that needs to be checked for this sort of linkage?
Plus there is no over charging of depreciation.... The system didnot calculate anything in the present company code.........
Regards
Ruby jamwal -
Income tax is not calculated After Total Income
Dear All,
I am running my payroll but my Income tax is not calculating properly because when am seeing my log then i find my total income is calculated properly but after that my STANDARD DEDUCTION is not been happening according to the rule if the employe is men it should be deducted 150,000 but it's not happenings . In payroll log where i can see the this (STANDARD DEDUCTION)amount because am not able to find how much deduction is happenings.My employe joining date is 01.05.2009
I am giving my salary components.
Basic-19500
HRA-13650
Performance-15000
LIC(IT0586 80C)-35215
Tution Fee(IT0586 80 C)-16800
Calculated PF-2340
CAlcualtion is done on the basis of 11 month
Gross Salary 529,650.00
Exemption U/S 10 107,250.00 (HRA Annual Ex)
Balance 422,400.00
Incm under Hd Salary 422,400.00
Gross Tot Income 422,400.00
Agg of Chapter VI 77,755.00
Total Income 344,650.00 (Till Here Every thng is fine From the next level am not able to identify how much and which basis MY Standard deduction is calculated)
Tax on total Income 52,395.00
Tax payable and surcharg 53,967.00
Income Tax 4,906.00
Kindly help me to resolve this issue am not a functional guy.
Thanks
SandeepDear Siknder ,
I alredy check in it0002 it male.
I want to know how should i check in my payroll log what calculation is happening after my total income get.
And also how i can identify which finacial year calculation is been performed. -
Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36I started up and plugged in my iPad and then the following message came up:
iTunes
❗️This iPad cannot be used because the required software is not
Installed. Run the iTunes installer to remove iTunes, then install
the 64-bit version of iTunes.
OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
failed to start. Verify that you have sufficient
Privileges to start system services.
Abort. Retry. Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
Your computer. Try reinstalling the program to fix the problem.
OK
Press OK and then the next message:
iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
OK
Any suggestions? -
Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll
Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
ArunPlease try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta -
Excise Duties is not Calculating in Excise Invoice
Hi Experts,
I am doing CIN configuration, i did all configuration settings, I did classify condition types also, but i am not getting Excise duties is not calculating in to Excise INVOICE, please help me with solution
Thanks
SESHUPlease try to develop the habit of updating the forum properly so that it will be helpful to all. The comment what you have added is not going to solve the problem.
thanks
G. Lakshmipathi
Maybe you are looking for
-
I then tried to uninstall Mozilla 4.0 and it keeps saying the same thing that I need to close firefox before I can continue, but it is closed. I have no browsers open and it still will not allow the uninstall or the install.
-
What are exercise steps for RTI scenario
hi, we have configured AII and EM using RTI scenario configuration guide. To run the scenario in a systmatic way, is there any any instruction booklet containing steps and the transactions. like go to this system and do this, go to that system and
-
Assign component / batch number at subcon PO
hi, We are using external batch number assignment to manage our components. At component overview of subcon PO, we will maintain the issue storage location and batch number of the component. However, we fount out error meesage ME178 , batch XXX not m
-
Can we catch the error in java??
can we catch/handle the error????if yes the how........
-
Do I Have to Have Duplicates?
When I import a CD/Album that has some songs on it that are on a previously imported CD/Album, the system will ask me if I want to over-write the existing songs. I ususally respond "no" because I want to keep each album intact. Now I have quite a few