Repair flow (material non valuated) must be transferred to storage location

Hi,
We create an Repair Sales Order.
Then we receive the material (Mvt 451) in non val. stock.
Then we like to transfer to the shipping storloc. but should not be valuated. From the shipping stor.loc. we would like to create a delivery and send the repaired material back.
How can we transfer the received material (mvt 451) to a storage location without adding value. Which movement type can we use?
Thank you,
Eric.

Hi,
We receive the material with mvt 451 in return stock.
So it is initial not available for transfer. But if I transfer it then it gets valuated. This is what we do not want. Which movement type do I need to use (or more steps) to move it from 451 return stock to an other storagelocation without value creation.
Thank you,
Eric.

Similar Messages

  • Change Material non-valuated to material valuated

    Hi experts,
    I have created a material before doing settings in transaction OMS2, so this material was created as non-valuated.
    After that, I have changed the settings in transaction OMS2 (I have marked qty updating and value updating).
    I'd like to change the material master - accounting 1 from material non-valuated to material valuated.
    Is it possible to do it?
    Thanks.

    Hi Osmar,
    You may change your non-valuated into valuated material, by doing following steps:
    1. create new material type for valuated material
    2. change your material with the new valuated material type using MMAM
    But ensure that new material type should be extended into particular Plant that has been assigned for respective material master.
    Cheers,
    Girang

  • No material is transferred in storage location after confirmation in COR6N.

    Dear Master,
    When I confirm in cor6n there is movement of goods & confirmation takes place.But there is no transfer of material in storage location & even when the order is checked the delivered QTY is zero.Since my process has 3 confirmation ( i.e 2 milestone & 1 Auto GR ).
    Also the material is backflushed.
    Kindly suggest

    Dear Chintan,
    1.Check the Delivered quantity after performing GR(manual/auto GR) for the process order.
    2.Assuming you have completed the 2 milestone confirmation and the final confirmation along with auto GR,incase if you are
    unable to find the quantity in stock,check for error goods movements in COGI.Only after clearing the 101 error movement,check
    the quantity update in the delivered field in COR3.
    Check and revert back.
    Regards
    Mangalraj.S

  • Material/Serial Nbr is "Stuck" in a storage location and can not be moved

    We have a situation created by my customers which has lead to a situation I have never seen before.  A material/serial nbr. that is in our Returns location that can not be transfered, issued, removed, or anything via ANY MIGO movement type combination.
    This is what happend:
    - Customer return processed.  Material ABC, Batch XYZ with Serial Nbr. 123 brought into our "RT" StoreLoc.
    - Clerk processed MIGO to do a Stock Transfer of this material to another StoreLoc. (PS).  He entered in the material ABC, batch XYZ, and a bad serial number 1233.  He used a 453 Movement type.
    - After realizing his mistake, he processed MIGO again and processed a GI Xfer posting with a 972 movement type to get rid of the bad material/serial nbr. he had just moved to the PS StoreLoc.
    - Then he tried to redo the Stock Transfer using a 453 Movement type for the material ABC, batch XYZ, and the good serial nbr. 123, but, he gets a "Deficit of BA Ret.blocked prev. 1.000 EA " error message.
    - At this point, he contacts me to ask what can be done.
    No matter what we try to do, we can not access this part/serial nbr. combo to move it or issue it or whatever.  It is like a ghost now.  You can see the serial number via IQ03, but you can not do anything with this part/serial nbr.
    Help!  Do I need to write an ABAP to physically delete this material/serial nbr from its batch?

    Hi,
    First of all, I would assume you used customized movement type 972 to 'get rid of' your material ID with wrong serial number 1233 at PS storage location.  If this is the case, then this posting did not return the stock quantity from PS to your RT storage location and that why when you tried to make another posting (with correct serial number 123), an error message was popped up as you simply do not have available stock.  The solution in this case are -
    1)   Cancel the posting that you made previously with movement type 972.  This cancellation will help return your stock (though with wrong serial number 1233) to PS storage location;
    2)   Cancel the posting that you have posted to move your stock back from PS to RT (again with wrong serial number).  This steps ensure the stock quantity '1' is available at RT storage location;
    3)   Make another stock transfer (with correct movement type 453 and serial number 123) from RT;
    4)   Delete the serial master record 1233 so that it can no longer be used.
    Cheers,
    HT

  • Define Shipping Data for Stock Transfers Between Storage Locations

    Hi Guru,
    Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
    Purchasing --> Purchase Order -->
    Set up Stock Transport Order-->
    Set Up Stock Transfer Between Storage Locations-->
    Define Shipping Data for Stock Transfers Between Storage Locations

    The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
    It is for the transfer of stock between storage locations with any movement type.
    Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
    You have to create a internal Vendor and Customer.
    Hope it helps.

  • MIGO Error WRX for Non-valuated Material for AUC

    Hi Expert,
    While Doing MIGO getting error see the screen shot below, in this scenario wht i did , i want to purchase two laptop we have made Purchase Order Capital and Given Material Non-Valuated no Valuation Class, and in this purchase order i ve assign the AUC Asset number along with Investment order No. once we we settlement the Order AUC to Main Asset thru AIAB & AIBU.
    system should suppose to give the Accounting Entry while MIGO Post.
    PK 70 217200 WIP Others as well 21720001 A/c Debited   Rs. 125000
    PK 96 150500  GR/IR Clearing a/c               A/c  Credited  Rs. 125000-
    but i don know where i done mistake why nt system allow to Post.

    By definition UNBW's are ony qty updating and have no value assoicated with them. Since the system needs to stock this qty somewhere it by deafult asks for a Sloc.

  • Storage Location valuation level

    Hello all,
    We are using moving average price (MAP) at plant level valuation. We have several Storage Locations assigned to the same plant. We have several Client non-valuated goods-receipt at Storage location. That increases the quantity, but not the value. Therefore, of course those actions
    changes the MAP. We are not using batches or WM module.
    How can we not change the MAP without using batches? Is that possible to put a valuation level at storage location?  
    Can anyone help us to solve this problem?
    Thank you in advance very much!
    Best regards,
    Pedro Grabulho.

    No you do not have to change OU which is plants in your case.
    1. The procedure is to activate split valaution using OMW0(zero) t-code, which is active in your case, I guess.
    2. Define Global Valuation Type. You can define Storage locations here or it can be any thing else. Use T-code OMWC. (BTW, every time you add one storage location, you have to make appropriate changes here also, It is not like your storage location becomes valuation type)
    3. Define Global Valuation Categories.
    4. Attach Categories to OU. (OU can either be Plant or Company code, there is no 3rd option). You can atttach in one or more OU(plant)where you want it active. 3rd & 4th steps are in the same T-code OMCW.
    5. Using the MM01 now extend the material to the newly created Valuation Types. (Accounting 1 view)
    Thanks,
    Ashish

  • Storage location for material to be made mendatory and default

    Hi,
    We are generating PR of material through CJ2N. I want to make storage location filed in generatl data tab of material, mandatory as well defalut value depending upon the project. If defalult value can not come depending upon project defination then i want to make default value as blank but mandatory
    How can i do this?
    Regards,
    Kalpesh

    Dear Kalpesh,
    In standard SAP the storage location will be an input field and no default values will get populated when you attach a material component in the activities as the material master will be extended to multiple storage locations.But in your case if is coming as default either some screen variant must exist or some parameter Id would have been maintained.Check Which & How the storage location is getting defaulted from your MM consultant.

  • Archiving material master - storage location

    Hi experts,
    I am in process of archiving storage locations of few material codes which are split valuated.
    Actually material/s are extended to 3-4 storage location and one storage location has to be removed from the same.
    i am using transaction code SARA with archiving object MM_MATNR and getting following error -
    plant/storage location dependent batch records exist.
    please suggest how to correct the error
    relevant solution will suitably be rewarded please.
    regards,
    Pawan Khurana

    I had not spoken about the tick for delete in test mode in the selection screen.
    I spoke about the variants for test and production run in customizing to your archiving object.
    If the variant that is saved for production run, has the tick for test run, then it just will not work.
    Further you should select X Complete for Detail log and list for P_PROT_O,
    This way you should get spool file that tells you more about errors or succesfull archived items.
    What did you do with the box in from of "Consider batch record without deletion flag" ?
    If empty, are you sure you have manually set the deletion indicator in MSC2N?
    What about the other boxes in this options section?

  • Storage location & backflush must be automatically set in Production order

    Hi Guru's ,
    While creating production order the storage location and backflush for the Components (ROH Articles) inside the Production order are manually selected.
    Is there any way, where i can set them (storage location and backflush) as a default whenever i create a Producton order ???  This means whenever i enter the components in a production order the system must automatically show the Storage Location and backflush as ticked.
    Pls help on this thing ....
    Best Regards,
    Gurpreet Singh Saini.

    Hi,
    To set the backflush always then in the material master MRP2 view set backflush " Always".
    To set the automatic storage location then you can define the "Stock determination group".
    This is will be help full if ur keeping material in more then one storage location.
    If you are keeping in the single storage location then in the MRP2 view maintain the storage location in the "production storage location " filed.
    Regards
    Vijay

  • Storage location based on valuation type

    Hi Experts,
                      I have a scenario where the same HALB material in the plant can be of 3 different grades.
                      Accordingly, if  split valuation is done based on the 3 grades, and  3 different storage locations are allocated for the 3 valuation types, how can the storage locations be configured so that material of one type procured or produced will not be allowed to be stored in any other location other than the one allotted for this type?
    Regards
    Sm.

    Hi Bijay,
                 Since 3 locations are maintained, it is already decided that when a particular valuation type (or grade) is received with 101 movement , only a particular storage location will be chosen as the destination storage location for that batch. The issue here is that the user may mistakenly post it at a different storage location. My question is that how the necessary settings may be done so that the system does not allow that particular material to be posted to  a different storage location ?
    Regards
    Sm.

  • Componets backflush out of Storage location [non WM]. WM PP active

    We have implemented WM and activated interface WM/PP.
    Finished good assigned to routing, routing has operation, operation assigned to supply area
    All components are assigned to operation
    Due to this system is deriving ONE storage location for all components [Storage location assigned to supply area]
    We have few components which needs to be backflushed out of a different storage location [Non WM]
    Though i entered this storage location in its material master, system allways deriving Storage location assigned to supply area
    Please help how we can ensure components backflush of storage location different than one assigned to supply area
    Thanks in advance

    Below are the solutions
    1. Note 126881 - Production supply area determination.pdf
    2. Seperate PSA for each storage location
    3. do not extend materials in PSA storage location then system will bring in storage location from material master

  • Automatic storage location for a material

    Hi,
    Can anybody help on following issue-
    Could we set up by Material number  for each plant, which Default storage location ( and/or shipping point ) will automatically show up in order entry.
    Pls. guide.
    Regards

    Hello,
    Your requirements are standard & can be met.
    Automatic/default Shipping Point:
    Go to IMG - logistics execution - shipping - basic shipping functions - Shipping Point and Goods Receiving Point Determination - Define Shipping Conditions.
    You enter the shipping conditions in the customer master - sales area data - shipping screen. Also in the sales document type configuration in VOV8, you can enter the shipping point. If you enter the shipping point in the sales document then this entry will overwrite the entry of the customer master.
    Go to IMG - logistics execution - shipping - basic shipping functions - Shipping Point and Goods Receiving Point Determination - Define Loading Groups.
    You enter the loading group in the material master - sales: general/plant data screen.
    Go to IMG - logistics execution - shipping - basic shipping functions - Shipping Point and Goods Receiving Point Determination - Assign Shipping Points.
    Here you will find as under:
    Shipping conditions + Loading group + Plant = Shipping Point.
    Default Storage location:
    Go to IMG - logistics execution - shipping - picking - Determine Picking Location - Define Storage Conditions.
    Here you define the storage conditions which you enter in the material master - General Plant Data / Storage screen.
    Now go to IMG - logistics execution - shipping - picking - Determine Picking Location - Assign Picking Locations.
    Here you will find as under:
    Shipping Point + Plantb + Storage conditions = Storage location.
    Maintain the data in the customer as well as material master correctly & the assignments should be as per the data maintained. Then whenever you will create a sales order, the system will determine the default shipping point & the storage location.
    Reward points if solution helps.
    With best regards,
    Allabaqsh G. Patil.

  • Material is blocked in Plant and storage location due to Physical Inventory

    Dear Experts,
    Our user trying "Post goods issue against 201 movement type,but its giving error message
    "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
       location 2101 due to a physical inventory".     
    we are not using any physical inventory here,give me sugestion.
    i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    Thanks in Advance
    varun

    >
    madhu varun tirupati wrote:
    > Dear Experts,
    > Our user trying "Post goods issue against 201 movement type,but its giving error message
    > "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
    >    location 2101 due to a physical inventory".     
    > we are not using any physical inventory here,give me sugestion.
    >
    > i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    >
    >
    > Thanks in Advance
    >
    > varun
    >
    madhu varun tirupati wrote:
    > Dear Experts,
    > Our user trying "Post goods issue against 201 movement type,but its giving error message
    > "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
    >    location 2101 due to a physical inventory".     
    > we are not using any physical inventory here,give me sugestion.
    >
    > i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    >
    >
    > Thanks in Advance
    >
    > varun
    Dear Experts,
    We have a simulation in our quality server,even though a physical inventory document is existed for the material,doc  status showing active in MI22,but its allowing me to issue goods,but its not allowing in our production system.
    please give

  • Maintain new storage location for existing material codes

    Dear,
    We want to extend material master to more storage locations. Currently we have coding starting from 910000 for finish material and is configured for storage location FG01, now we want to extend all the codes with 91 series to storage location PR06 & QC01
    The same needs to be done for many other material codes with different series.
    Kindly give suggestions/solutions
    Thanks
    Vikram Sanghvi.

    Hi,
    You can use extend the material from Plant to plant or from Storage location to storage location.
    or 2nd is that Go to SE16 to get all material from MARD Table. then
    export in Excel and go to Mass mainteince in material master to extend the material.
    try this one
    http://www.sap123.com/showthread.php?t=158
    this may  help U !
    Regards,
    Pardeep Malik

Maybe you are looking for