Replace error 404 page

I'm trying to cause all page not found errors (404) to go to a new html page. i have added
Error fn="send-error" code="404" path="new document"inside of <Object> in obj.conf but it has no effect. Any suggestions? Thanks.

Got it working for my server
in the default object in obj.conf I added
Error fn="send-error" code="404" path="/export/ws1/docs/error.html"
Error fn="error-j2ee"
AddLog fn=flex-log name="access"
</Object>
Note that path should be the full path of the file and not a relative path wrt docroot.
Meena

Similar Messages

Wwv_flow.accept, error 404 page not found

I am trying to install the OEHR Sample Objects for the Hosted Demo environment at apex.oracle.com site so I can do the Oracle Application Express 2 Day + Tutorial. I downloaded the zip file and got the .sql file extracted ok. The import works ok for the application, but hangs when trying to load the Supporting Objects. It eventually gives me that nasty old error 404 page not found when on MS windows 2000 and IEexplorer 6 ( and a similar result in xp using IEexplorer 7).
I cannot do much in the tutorial without the samples.
Any ideas, anyone else gotten stuck here? Thanks

Dimitri,
Many thanks for the reply.
The problem appears to be intermittent and can happen on, quite literally, any link or button. Anything which causes either a page submit or link through to another page is a likely candidate. And this isn't just whilst running the app - it's within the app design part, too. It seems to be an issue (possibly) with page delivery.
My gut feeling is that it seems to happen more after the DB has been up for a while. However, this may just be a matter of perception as I've also had it happen within minutes of a DB restart.
I'll have a play around with apex.oracle.com, but my suspicion is that the Oracle site works fine (this would be a far more visible error if it happened on apex.oracle.com, too).
One thought is that it might be an EPG config issue - it'd be interesting to check the config of an Oracle-supplied Apex area, if that were possible. Another thought is that it could be the network, though (typically) everything else on the network appears to be running fine...
Many thanks,
David

Ent 9 - Can't run mgmt console - admin.cwr gives Error 404: page not found

Post Author: Alan Weiner
CA Forum: Deployment
We just did a fresh install of Crystal Enterprise 9. When we try to run the Management console, we get an "Error 404: page not found"
http://wdcwfc80/crystal/enterprise9/admin/en/admin.cwr
Error 404: The page cannot be found

Post Author: Alan Weiner
CA Forum: Deployment
From the server (although, it uses a browser to connect)
colin mackenzie:
Hi Alan Weiner.
Do you get this message when you run this from the server? or just the workstation / client browser?

HTTP Error 404: Page not found on my 8520?????

hi hope you can help me i use my phone loads for facebook and get notifications sent to my phone but when i click on one and i wnt to go into a group via the noticication on my phone i get HTTP Error 404 Page not found can anyone please help me its been like this for a couple of weeks now thank you x

Hi Nehal
We have found the issue . We were using wrong http script .
But we faced another HTTP error :
http error 401 unauthorized 5024 breach of security
when I want to store business document via GOS in VF03

Error 404 : page not found

hi all
i try to make like this demo:
http://download.oracle.com/otn_hosted_doc/jdeveloper/11/demos/overview/JDeveloperOverview.html
i do very thing like it except the change in JavaServiceFacade becaus I don't add any query, only I want insert some data in a table
the problem :
when i ry to run my faces the browser display ERROR 404 Page Can't Found
Any body can help me

Hi!
Try selecting some JSPX page in navigator and then click Run (or right click and then select Run). If you edited that facade bean it is big chance that you started Model project instead View.

Exchange 2013 RPC URL shows Error 404 Page Not Found

Hi,
I have been told by Barracuda Support to verify my Exchange 2013 RPC url is working correctly using the following address in a Web Browser:
https://RoH server address/rpc
When I hit this URL I input my credentials and get a Error 404 - Page Not Found.
I dont have any issues with Outlook Anywhere and clients are working fine. The tests come from this article and I am wondering if they are still valid for Exchange 2013 so need some help:
https://techlib.barracuda.com/BMA/EnableRoH
Does anyone else get the 404 error when they try the RPC virtual directory? If I got rpc/rpcproxy.dll that works fine and no issues.
We have Outlook Anywhere configured for NTLM authentication so maybe this is an issue and should be Basic?

I did some digging in the CAS RPC logs and I found this connection attempt:
<snip>
2014-06-18T15:22:40.902Z,CAS-SERVER,RpcHttp,"S:Stage=EndRequest;S:UserName=domain\admin;S:OutlookSessionId=""{1A731432-5548-402F-892A-C9FE489BB78D}"";S:AuthType=Basic;S:Status=404 Not Found;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.domain.local:593;S:RequestId=7b1e355e-6448-4ed4-8112-8ab13d88a76f;S:ClientIp=192.168.0.17"
</snip>
As you can see the 404 Not Found is for the request to /rpc. I am wondering if maybe this has changed in Exchange 2013 SP1? Or have I got a bigger issue here?

CTRL-E Loads ICE Toolbars and Standard Error 404 Page

I have a site registered with InContext. I have one editable region in index.php. When I click ctrl-e, ICE loads all toolbars, however instead of loading my index.php file, it displays the default standard Error 404 page within the ICE framework.
What information do I need to supply so that someone can help.
Thanks
Loyce

Okay. I use 1and1 as my hosting provider and it seems they use sedo domain parking as a revenue stream. So when a HTTP HEAD request is recieved it returns 200 OK even for pages that do not exist and then redirects to an ERROR 404 which contains advertisements. I don't really like this, but you can turn it off and see a standard, generic error page or use custom error pages, however this does not change how the server handles pages that do not exist.
Your solution to go to the InContext Editing Administration Panel and simply "Save" the site settings for this site. Will not work for me because when
ICE automatically checks if it can use HEAD requests on my server it finds that it can and never falls back to the alternate method of FTP.
If I had the option to force the use of FTP, all of my problems would vanish.
I have a request in with 1and1 to address this issue, however I see no reason for them to comply.
I can manually copy my index.php file to index_draft.php and everything will work again until the draft is published or deleted. For now, I plan to edit the ice.js file to check if the file exists and if not, copy the original.php to original_draft.php so that i can bypass this issue for now.
Is there a way to force the HTTP HEAD request to fail on my server?
Anyway, that is where I am so far on this..
Mr Popa, do you have any other thoughts on this so far?
Thanks for your time.

Clicking the Sign in link often leads to an error 404 page

Hi!
This is an error that has been around (at least on my computer) for some months now:
Pressing the Sign in link on the Adobe Forum pages takes me to a non exising page error (404).
this is the page I get to:
Page is not available broken link 404.
Also there is no form to report this kind of web page errors, when clicking the "Send us an e-mail" link on this page..
Signing in from some other page or form at first seems to make no difference,
reloading the page makes no difference, but clicking "sign in" again, I get logged in (without getting to the sign in page).
Am I the only one having htese problems?
I'm on Windows, alwsay using FireFox (latest version).
Best regards,
Andreas Jansson

Andreas,
A week, or so ago, there was some maintenance on the Jive end of things, and many were getting similar 404 errors. It was my understanding that those had been resolved, and that things were working fine.
As several have been having issues with Adobe's own cookies (I had a big one with Adobe Store), I would also try cleaning your browser's cache, just to make sure that it's not something specific to your browser.
As many of the "powers that be" monitor this forum, like the tireless John C./Adobe-Admin, I suspect that after the three-day weekend (for many in the US), that you will get definitive answers and advice. Look for those to come on about Tuesday.
Good luck,
Hunt

Enterprise Manager returns error 404 (page not found)

Hello
I searched forums and found several threds like this but couldn't solve this problem.
I am running SLES 11 x64 on VMware virtual machine.
Linux hurricane 2.6.32.12-0.7-default #1 SMP 2010-05-20 11:14:20 +0200 x86_64 x86_64 x86_64 GNU/Linux
Installed Oracle DB 11g, installation went normal, without any errors. enterprise manager is running:
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://hurricane:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.
Logs are generated in directory /opt/oracle/product/11gR1/db/hurricane_orcl/sysman/log
database is started, I can connect and execute queries. I remover oracle and then entire OS, instaled everithing from the scratch, dropped and recteated repositories, but didn't help.
I can connct to https://hurricane:1158/ but there is no page at https://hurricane:1158/em
what can I do?

you are able to connect to https://hurricane:1158/, then why you are concern of link https://hurricane:1158/em/console/aboutApplication?
have you tried with https://hurricane:1158/em/console?

Error 404 on editable page

I and a colleague have successfully loaded and edited your
demo (news_start.htm) example and are happy with the process.
However on setting up a live site, on accessing the editable area
with CTRL+E I keep getting the (custom) Error 404 page and cannot
proceed
The editable page is:
http://www.andrewleestrust.org/links.htm
and the (custom) error is generated by:
http://www.andrewleestrust.org/includes/ice/ide.html#page=links.htm
Any suggestions?

Hello ClandonMan,
It sounds like you're experiencing the same issue discussed
in the
Error
Editing Page topic...
Please take a look at the following Tech Note which discusses
the issue:
http://www.adobe.com/go/kb406749
Error: "The operation could not be performed because a
problem occurred while attempting to connect to the server" when
trying to edit a page using Adobe InContext Editing
Issue
After successful login in InContext Editing or when
navigating to a page in your website while the InContext Editing
toolbar is displayed, you receive the error "404 File or Directory
Not Found", or, depending on the server configuration, a custom
error page is displayed instead.
If you try to edit the page you will receive the following
error message: "The operation could not be performed because a
problem occurred while attempting to connect to the server. Please
check your Internet connection and try again. For more details,
please visit the InContext Editing Support Center".
Reason
InContext Editing requires the HEAD HTTP request method to be
enabled and functioning properly for a registered web site.
InContext Editing will not function properly if the HEAD HTTP
request method is disabled or if it does not function properly.
InContext Editing is using HEAD requests to check the
existence of the draft and published versions of the current page.
If those calls do not work as expected (the HEAD should return
status code 200/304 if the checked page exists, 404 otherwise) then
you will experience this behavior. In most cases the problem
appears on web servers running IIS 6 or 7 with PHP installed as
CGI, but this problem may occur with other server configurations as
well.
Solution
Contact your web hosting provider for assistance. This may
require changes in web server configuration.
Best regards,
Corey

Site change causes error 404

Hello, I hope someone can set me straight regarding my site made with iweb; some history and the problem.
I've been using iweb v1.1 since last November and have been updating pages once I had my site finished. I haven't done anything major up until now. In doing my changes, I condensed and what used to be my welcome page was deleted out, leaving the secondary page to be my 'main/welcome' page now. When I went to check out the changes, I saw only the same site as I used to have. NO changes implemented. So, I went to Fetch, took out all the items NOT in my 'published to' folder on my hard drive, and re-uploaded the iweb site with its changes. I got an error 404 page. So, I spent some time talking to the host people and the result was that HE could access the site and even told me what the changes I'd made were. So, my comp had the issue, yes? I called my girlfriend, she too could manually type in the site and pull up the new pages. So, I reset browsers, cleared caches, cleared cookies, restarted the iMac, reset the modem (DSL), reset the router, and still had the same issue. BUT; my girl friend told me she'd typed the site in and didn't use a bookmark (as I think I'd been doing, though I could swear at least once I had to type it in while talking to the host tech). So, I typed the name of my site in and it came up fine. When I tried to reaccess through the bookmark, and same error 404. So, I retyped, re-connected, and then re-bookmarked. Everything seems good now. No problem, yes? Then later, I get an email from someone I know who wanted to visit the site and got the 404 error too. Hmm, I'm wondering; will others have the same issue? That is, will everyone who ever had bookmarked my site be getting the 404 error? That's one issue.
The real question stems from the original statement; I changed the site using iweb and took away the opening Welcome page. Is this what is causing the issue? The site USED to come up (if I typed the site; swordofshakespeare.com) as 'swordofshakespeare.com/swordofshakespeare.html'
Now, I notice that first page is coming up as 'http://swordofshakespeare.com/Sword%20Of%20Shakespeare.html'
Does this mean I'm using a sub-page as the main page and causing the error? The tech tried to help but when he did a lookup (whois + location, etc), everything was pointing correctly. The numbers came to be 74.58.105.98 I checked myself and I can verify that. Now, when I put in those numbers earlier, with the tech, I was taken to some sort of Epson page, a search page of some sort, which would change it's color/format slightly but still be pointed toward Epson. The tech told me he thought it was some sort of malware/spyware on my comp redirecting me. When I called my girl friend earlier (as I mentioned) and had her input the numer, she too got the Epson search page. So, NOT just my comp, that's the way I figured it.
In all this, I'm just trying to figure out how to understand iweb better. When I uploaded the changes, I assumed the 'site' would see the new index and ignore such as old Welcome pages and their associative folders et al. When the site didn't seem to do this, that's when I went and manually deleted using Fetch. That's when the 404 started.
Okay, sorry for the long windedness, but wanted you to have the history so maybe I could understand what to do. Would it be easier to start over with iweb, make a new 'site' and publish? Doing this, would I have to totally delete all the old site pages/files/folder? Or, should I just leave as is? It certainly works but I think others are now going to get their own 404 pages and I'll probably loose some traffic.
BrokenSword

The site USED to come up (if I typed the site; swordofshakespeare.com) as 'swordofshakespeare.com/swordofshakespeare.html'
Now, I notice that first page is coming up as 'http://swordofshakespeare.com/Sword%20Of%20Shakespeare.html'
Of course if you change the name of your topmost page, your site is going to come up with the changed name. All bookmarks that used the earlier page name would be broken. If you want to have it back the way it was, just change the name back inside iWeb (i.e to swordofshakespeare instead of Sword Of Shakespeare), republish, and reupload.
Will that solve your problem?

OIM server running but error 404

hello experts,
I have started OIM server and its in running state in both cmd and weblogic(7001, server status) but while opening it in web console am getting error 404 page not found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Kindly suggest.
Regards,
Karan

hi
Current staus in deployements tab of oim_server
DMS Application (11.1.1.1.0)     Active     Web Application     5
Nexaweb     Active     Enterprise Application     45
oim (11.1.1.3.0) Failed     Enterprise Application     47
OIMMetadata (11.1.1.3.0)     Failed     Enterprise Application     46
RoleSOD     Active     Enterprise Application     50
spml-xsd     Active     Enterprise Application     49
wsil-wls     Active     Enterprise Application     5
wsm-pm     Failed     Enterprise Application     5
FYI : yesterday I have worked on web console, and it was working fine.
Regards,
Karan

GUI Error 404

When i try to connect to my ise through web browser if get Error 404 page.
i have a 3395 appliance with 1.1.1.268 code running on it
thanks

Hello,
When NDES is installed in a distributed deployment, a remote root or sub−root CA will be designated
by CA Name or Computer Name in the service installation. The NDES server sends certificate
registration requests to this target CA server. If the endpoint certificate registration process fails,
packet captures (PCAP) might show the NDES server return a 404 Not Found error to the ISE node.
In an attempt to resolve, reinstall the NDES service and select the Computer Name option instead of
the CA Name.

Error 404 then the registration of the licence Management

I have a problem then the registration of the SQL Server Migration Assistant for MySQL licence.
After the installation, the application ask me to registrer. On the Sign In Web page, I enter my Win Live Id & password, I clik "Sign In", and arrive to this page :
http://www.microsoft.com/404.htm
an simple error 404 page.
I realy need to work with this assistant.
Do you know a solution, please?
Thank you.

Hello,
Please consider the following resource. Read the “Licensing SSMA” section.
http://blogs.msdn.com/b/ssma/archive/2011/02/07/mysql-to-sql-server-migration-how-to-use-ssma.aspx
I had a similar issue when I was trying to download the registration key from the corporate network because of network security enabled.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

FlashHelp deployed in RH7 displays 404 page error instead of topic

I upgraded some help projects from RHX5 to RH7.
In MAC (OS 10.5.x) Safari (3.2.1), when the application calls the FlashHelp authored in RH7, the Help opens, but the Help topic does not display. Instead, a 404 Page not found error is displayed. If you click a topic in the TOC the HTML content is displayed - so the Help does work after you select a topic.
From the same application, if you call a Help project that was not upgraded to RH7 (but was still authored in RHX5) the topic content opens as expected (you do not get the 404 Page error).
Has anyone else experienced this problem?

JulieCarr wrote:
The only resolutions I found so far are:
- replace RH js call to direct call to topic URL
- switch to WebHelp
When I submitted this issue to Adobe support I received a call stating that they do not support JS application calls to Help systems generated in RH. If you can open the topic (that is an individual html topic file) independently using the browser, apparently they consider that generation successul and the browser to be supported.
Just musing over the reply here. It's odd that they would say that, giiven the fact the WebHelp API *IS* a JavaScript application call, is it not?
<bangs head against wall>
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Replace error 404 page

Similar Messages

Maybe you are looking for