Replace the arch logo in the framebuffer during boot?
since the tango version of the arch logo http://www.archlinux.org/media/logo.png is also used on the homepage and since it looks better than the currently used (IMHO ), i would like to know how people would think about replacing the current icon during bootup: http://www.archlinux.org/logos/archlinux_logo_aqua.png with the tango version?
i think it would look better.
onearm wrote:
scottlc wrote:The beyond kernel package has fbspash support for those who want a graphical boot.
Yeah, I know and it's what I'm using right now
What I meant was why not using fbsplash/gensplash/splashy with a arch-based theme (from 800x600 till 1900x1200 or similar resolution to satisfy everybody needs) by default? Why only a little logo when you can have better resolution and a nicer without-X look?
Obviously with the beyond and/or the vanilla kernel.
Not everyone wants a graphical bootup. And some cards don't support framebuffer and throw error messages. My card did this until kernel 2.6.18.
Similar Messages
-
How can I get the arch logo in console/terminal during boot?
Hello
I just installed arch as my first linux, and I would like to get the arch logo in the top left corner during boot, like on the following screenshot:
http://i4.photobucket.com/albums/y132/s … h_boot.png
uname -a:
Linux 3.6.6.1-ARCH #1
syslinux bootloader
How can I do that?
Thanks a lot and greetingsI'm not sure what's the situation now, but you may not get the logo - neither the penguin nor Arch logo:
* https://bbs.archlinux.org/viewtopic.php?id=120516
* https://bbs.archlinux.org/viewtopic.php?id=122778
* https://bbs.archlinux.org/viewtopic.php?id=124730 -
My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US -
How to replace the LabView logo at the top left corner of running VI windows
Hi All
I need to replace the Labview logo (at the top left corner of the windows) when my VI is running. Same thing applies for any of the pop up windows I have in my program.
I have a .jpg file of the logo I would like to replace the Labview logo with. I would appreciate any help on the best way to go about this.
Thanks in Advance> It's also worth bearing in mind that since you have a .jpg there are free online converters that will generate the .ico file from your .jpg if you don't have access to a graphics package that allows you to make .ico files.
> Is there a way to convert the current logo I have .ico??
Seems like I am now able to read into the future. Better play the lottery at the weekend!
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
Is it possible for me to swap out the apple logo in the message screen saver with my company's logo? If so, how? Thanks!
How long will my iPod service take?
If you choose to use the Online Service Assistant, or service via Apple Technical Support: If your iPod is not personalized, you can expect service to be completed within approximately one week from the time you send your iPod to Apple. If your iPod is personalized, you can expect service to be completed within approximately ten calendar days from the time you send your iPod to Apple.
Attention iPod shuffle customers: Service for iPod shuffle is performed by means of an express replacement program, via Online Service Assistant or Apple Technical Support. For more details, please review the Express Replacement Service tab on the left.
Above from:
Apple - Support - iPod - Service FAQ
If it is caused by a hardware problem there is nothing you can do to prevent it from recurring unless it was caused by abuse like from dropping the iPod.
Otherwise make sure you ask apple how they fixed. it. -
I am trying to upgrade my macbook pro to os x mavericks， but it has been on the reboot process for more than 2 hours. There is only the apple logo with the spinning ball thing. What should I do?
Hi there Candyleehoiman,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W. -
When opening my MBP, all that shows is the apple logo and the forbidden sign
Hello everyone,
So I'm on a 2011 MPB using 10.9.5.
I've closed it after using two nights ago, and when I came back home the day after and tried opening it, all that appeared was an alternation between the apple logo and the forbidden sign (here it is : http://stickeramoi.com/3447-3369-large/autocollant-panneau-interdit-interdiction .jpg)
I've tried repairing the disk but that failed.
Tried also re-installing OS X on it but that took about 17 hours (which is ridiculous) so I've cancelled that and instead, tried restoring a Time Machine save.
After it finished restoring the latest backup, I'm still faced with the same problem. It just won't boot.
Thank you for your time and help,Yeah well I think I've tried about everything that I found out there.
From console commands to installing Lion through Internet recovery...That's it, I give up
Will take it for replacement tomorrow.
Thank you -
How to remove the Adobe logo from the player/skins area
I would like to remove the Adobe logo from the player area.... how can I do that??
Hi
You can remove the logo and add your logo by doing the following
1. Create a new file named logo.swf of dimension 47 x 27 pixels that contains your branding.
2. Go to the templates folder under the Presenter 8 installation folder
3. Add your custom logo.swf file to the Templates folder.
4. In PowerPoint, publish the presentation to your computer.
5. View the output to see the new logo.
6. this logo will appear every time you publish any presentation
If you want to replace the logo in already published presentation
1. Create a new file named logo.swf of dimension 47 x 27 pixels that contains your branding.
2. Go to the publiahed folder >> data >> resources and paste the logo here
3. Go to the data folder and open vconfig.xml
4. Search for <uireplace name="logo" value=""/>
5. make value equal to "resources/logo.swf" and save vconfig.xml
6. Launch viewer.swf
There is no way to remove the logos completely. A workaround is to add an empty swf of dimension 47 x 27 pixels.
Hope this helps
Thanks
Mahesh -
hi!
can somebody please help me?
i wanted to update my iphone 4s to ios6. no problems until the install/loading bar appeared on the iphone. that was 2 hours ago. nothing happened there is no progress being showed.
i also reset my iphone (home button + standby button). result: the apple logo and the bar appear, but still nothing happens...
thanks for helping!
kr,
clemulusI took my phone to apple they replaced the speaker. That corrected the problem
-
Ipod nano 4th generation switches between the Apple logo and the menu
I have a 4th generation 8 g iPod Nano that probably has about 1 hour of use since my wife won it in a raffle over a year ago. When I went to recharge it yesterday, the only thing that happens is that the display, when connected to the computer, flips back and forth between the Apple logo and the menu screen. Whenever either one of them appears, it will disappear in a few seconds, then repeat the sequence. I have done a reset and restore,and installed the latest software version but the same thing happens over and over again. If the iPod is detached from the computer, ie, its power source, NOTHING happens on the display. It black and you can't get it to show anything. My theory was that the battery needed to be replaced even though it wasn't used much in the year since she got it. In fact. the absence of use and recharging it and discharging it may have lead to this problem in the first place. However, my one issue with that theory is that, when connected to a power source, like the computer, I would think I could get it to function normally, which I can't. I was able to get to the "service menu" which won't disappear when I move about different choices, as long as its connected to the computer. Again I can get nothing if its not connected to a power source.. does anyone think that this problem could be solved by replacing the battery or does it seem like that is only part of the problem? Thanks for any help and suggestions you may have to offer.
GeoffDespite the Nano only being used for an hour or so, the battery needed to be replaced= problem solved!!
-
How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
MarceloIf there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac -
My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?
Here are Apple Steps: http://support.apple.com/kb/HT1808
-
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "
Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard -
i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?
Look at this support article:
http://support.apple.com/kb/ts2570
Ciao.
Maybe you are looking for
-
Copy files between pcs - checksum error
Scenario: - Two PCs (A and B) in a small LAN. - Computer A runs a NFS and a FTP server. I can transfer file from A to B mounting the nfs exported directories or downloading them via FTP. - The files can reside in ext3 or xfs partitions, on different
-
Hi to all, I have a range of pictures (30 pic). I want to do something like, after 5 images in a first row, the nxt 5 images will appear second row. However, I keep on having all the images in the first row, and yet no images in the second row. Codes
-
after an update I have an following picture on my screen: usb narrow towards I tunes. I can't do anything. If I connec it ty my I tunes it doesn't show me my I pod. I tryed everything. This thing still doesn't work. what should I do
-
Progress Bar after clicking a link
Hi, I would lilke to add a progress bar after clicking a link from the end user interface. I know we have to use onClick property to do this, I found a Java script code which generates a progress bar and included that java script code in the onClick
-
Where is the ellipses tool in AI?
I'm sure it sounds stupid, but that really is my whole question. Where is the circle tool?