Replication of Vendor (in ECC ) to CRM

Hi,
Requesting your valuable input in following scenario:-
We are using CRM 2007 as front end system , where we need "vendor" for creating sales order.
We have "vendor" created in backend ECC ( in tx: xk01 ).
And we want to use "vendor"created in ECC to download/replicate in CRM.
I understand We have only Business Partners in CRM .
Please suggest a steps/solution to achieve this functionality.
Thanking you in advance,
regards,
PD

Hi Prashant,
I observed the same error initially when I tried to download vendors. Please checking the following points.
1. Please check the settings that you maintained in the table CRMSUBTAB in ECC. You need to have an entry as follows:
User: CRM
Object: VENDOR_MAIN
U/D : DOWNLOAD
Object Class: VEND ( & not BUPA for this entry)
Function Module: PI_BP_VENDOR_MAIN_EXTRACT
The other entry (for upload) has similar but different values. (Refer to the OSS note 883162.)
2. Check if you have applied any filter settings in CRM for the adapter object VENDOR_MAIN.
Best Regards,
Anup

Similar Messages

Material Master replication ... ECC to CRM

I have a requirement to replicate a material master record from ECC to CRM, based upon an 'external event' (i.e. an event other than the change of the material master record itself, in ECC). The event is the change in status of a record in a z-table.
What is the best way to accomplish this? Is there a function module or BAPI that I can call, to trigger the replication of a material to CRM, whenever this event occurs? Are there other suggested / better approaches to satisfying this requirement?
Your help will be much appreciated!
Thanks,
Duane

If your CRM system is new then you have to do the initial download of material from ECC to CRM. To do that first download the material customizing object (like category. group etc), from transaction R3AS (CRM side) then download the product/Material.
After do the initial download, activate the change pointer for the material related message type (matmas etc..)from transaction SALE (ECC). And schedule I job to run its on daily basis.
If can check the below link for details
[http://help.sap.com/saphelp_crm52/helpdata/EN/46/57605301a208e7e10000000a114a6b/content.htm]
Thanks
Subhankar
Edited by: Subhankar Garani on Sep 1, 2011 12:21 AM

Replication of Customer from ECC to CRM --- Multiple A/c Groups

Hi Experts,
I am trying to replicate customer master data from ECC6.0 to CRM7.0 and vice versa. Replication is up and running right now for only one Account Group (GEN-Z created for business) in ECC.This A/C Group (GEN) is mapped to BP Classification "Customer" in PIDE.
Now, I want to replicate customers with 5 other A/c groups to CRM as well. In PIDE, I have maintained a total of 6 entries for a/c groups to classifications (ECC to CRM). All 6 A/c groups are mapped to "Customer" classification.
This "customer" classification generates customers in role "Sold-to-party". For STP role mandatory fields have been matched to GEN A/c Group.
My main issue is how do I make sure there is no mismatch of customer fields in ECC and CRM as All other a/c groups that have also been mapped to the same "Customer" classification in the same way as A/c Group GEN. Problem would crop up because, there are diff set of fields kept mandatory for different a/c groups.
From CRM to ECC, I can select the relevant a/c group from "Classification" tab in role Sold-to-party.
But, there would be the same problem of mismatch of mandatory fields between Sold-to-party and all other a/c groups.
Is there a solution to this problem. How can I make sure replication works for multiple A/C Groups too.
Thanks and Regards
Varun Taneja

Hi Robert,
I read that in some other post too, it worked for someone. But here it is, I would like some advice from you...
Suppose, I have 2 A/c Groups... X and Y, both with different mandatory field settings in ECC.
Now, In BP field grouping on CRM side, I have made field settings(mandatory etc.) according to X A/C group. So when I select, X from classification tab during BP creation, replication would be successful.
And, if I select Y from classification tab, it would give an error "Fill in required mandatory fields" since fields have not been synchronized with Y. How can I take care of this issue.
Also, for ECC to CRM, how do I select multiple classifications, it doesn't allow for more than one entry for one classification.
I hope I am clear about my requirement.
Please share your feedback.
Thanks and Regards
Varun Taneja

Replication Z-Tables from ECC to CRM

We have a client with some Z-Tables in ECC and we need to replicate this tables in CRM, anybody have any information about this.
Thanks in advanced
Sebas

Hi Sebas,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
You can also try this
1. Create the Ztables both in ECC and CRM
2. create customizing adapter objects in R3AC3.
3. copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code. load object in R3AS.
4. create a variant and shedule the based on requirement
Thanks and regards,
Madhukar Reddy

Replication of Quotations from ECC to CRM

Hello Experts,
The scenario is as follows:
I am required to replicate all the quotations from ECC to CRM.
My question is: what are the various middleware settings to be done?
I have created a transaction type for quotation by the same name in ECC and CRM so far.
It would be great if I can get help on the following:
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
2.What action profile do I need to maintain on ECC and CRM side for quotation?
3.How should the number ranges be defined on ECC and CRM side for quotation?
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
What more needs to be done?
Once the settings are complete and fool-proof, I know I can run an Initial Load (R3AS) on the object: SALESDOCUMENT from R/3 to CRM.
What are the filter settings to be maintained in SalesDocument Object?
Experts, this is my requirement and all the pointers would be greatly helpful.
Many thanks,
VSK.
Edited by: venkatskumar on Feb 16, 2011 12:17 AM

Hello
Please find below my reply :-
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
>> You can make a Z copy of the standard Quotation Item categories in ECC and CRM.
2.What action profile do I need to maintain on ECC and CRM side for quotation?
>> Action profile settings are specific to your business scenario. You need to define ACTION Profile in ECC. In CRM you can have an ACTION PROFILE and assign it to the CRM Transaction Type
3.How should the number ranges be defined on ECC and CRM side for quotation?
>> If ECC is a leading system for quotation creation, the number range will be EXTERNAL in CRM and assign this EXTERNAL number range for CRM Quotation Transaction Type
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
>> Yes
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
>> Not sure on this. Requesting other experts to answer this.
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
>> Yes. The master data such as Material, Customer, Pricing should be downloaded to CRM, if the quotation needs to be replicated to CRM.
Hope this will be helpful.
Regards

Replication of CUSTOMER from ECC to CRM

Hi CRM Guru
Is that anyway to download the partner function (sold-to, ship-to, payer, bill-to, employee) in the customer sales area data from ECC to CRM (created as BP relationship in CRM) in the INITIAL LOAD?
For example:
Customer in ECC 100000000 have the partner function in the partner function tab under the sales area data
SP Sold-to = 100000000
SH Ship-to = 100000001
PY Payer = 100000002
BP Bill-to =100000003
And create those relationship in CRM under the Relationship area.
Please advice.
Thank you

Hi.
If what you are trying is to replicate the partner functions as relationships, first be sure that you have replicate the customer (the main and the others on partner functions sales areadata) using the middleware object CUSTOMER_MAIN.
Then run the object CUSTOMER_REL for the main partner. This will result on the relationship creation at CRM side, representing the partner functions on R/3 site.
Be aware that if in R/3, the main partner represents all the partner functions, when it is replicated into CRM, the system does note create a relationship to himself, but this not means that the partner can be used in sold to party, payer, ship to and bill to partner functions on documents.
Regards.
SM

Replicate customer and vendor from ECC to CRM

Hi experts,
Is it possible to replicate customers and vendors extending the same BP in CRM?
If i had one customer in ecc that is a vendor too, can I configure or implement some badi in middleware to replicate changes to the same BP in crm?
Best regards,
Caíque Escaler
Edited by: Caíque Escaler on Jan 12, 2011 4:57 PM

If I recall from my ECC days, this field is used for back to back orders i.e. Sales Order creating a back-to-back Purchase Order. As such, there is no relevance for this data within CRM, so I would not expect it to be maintained there. It only has relevance within ECC (Sales & Purchasing).
Mark

Contact Person Integration for Vendor Master(ECC to CRM)

Hi,
Just wanted to know if Contact Persons in Vendor Master records in ERP are replicated in standard to CRM in the object VENDOR_MAIN. Dont seem to find any std. documents on this that says it should be replicated?. Any ideas?.
Thanks.
Example:
Go to Tx: xk01 in ERP and maintain a Contact person.Replicate to CRM.Vendor is created as an Organization but no relatonship is created to a Contact Person.Is this a std behaviour?.
Regards,
Praveen

Hi,
The answer as far as I've known so far is that this scenario is not available in standard.
An idea would be to use a new adapter object in CRM. (on a project basis.)
Regards,
Praveen

Material Replication problem from SAP ECC to CRM 2007

I am trying to load material data from SAP to CRM. Materials are in general coming across however i have a lot of errors visible in smw01 with the following entries:
@0A@     BDoc validation error     PRODUCT_MAT     mBDoc Validate     06/04/2010     14:20:05     QAS100     R3AI_MATERIAL     MW_RFC_USER     DF6FDBE147AC2EF1B467002264F6091A
On closer examination i can see that the specific issue relates to teh following:
A key was used twice for multirow set type CRMM_PR_TAX
    Message no. COM_PRODUCT512
I can see on closer examination of the individual entries why the issue is occuring when i show the Bdoc message extra data I can see that there are multiple entries for CRMM_PR_TAX
CLI PRODUCT_GUID                     TAX TAX TAX_ TAX_GROUP            TAX_TARIFF_CODE T C VALID_FROM          VALID_TO            UPNAME       H LOGSYS
400 00000000000000000000000000000000 IE      MWST NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
I also note that the PRODUCT_GUID is blank 00000000000000000000000000000000 whic shouldn't be the case.
It's just not clear to me what i need to do to resolve the issue
Any help would be greatly appreciated
Regards
Eddie

I am trying to load material data from SAP to CRM. Materials are in general coming across however i have a lot of errors visible in smw01 with the following entries:
@0A@     BDoc validation error     PRODUCT_MAT     mBDoc Validate     06/04/2010     14:20:05     QAS100     R3AI_MATERIAL     MW_RFC_USER     DF6FDBE147AC2EF1B467002264F6091A
On closer examination i can see that the specific issue relates to teh following:
A key was used twice for multirow set type CRMM_PR_TAX
    Message no. COM_PRODUCT512
I can see on closer examination of the individual entries why the issue is occuring when i show the Bdoc message extra data I can see that there are multiple entries for CRMM_PR_TAX
CLI PRODUCT_GUID                     TAX TAX TAX_ TAX_GROUP            TAX_TARIFF_CODE T C VALID_FROM          VALID_TO            UPNAME       H LOGSYS
400 00000000000000000000000000000000 IE      MWST NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
I also note that the PRODUCT_GUID is blank 00000000000000000000000000000000 whic shouldn't be the case.
It's just not clear to me what i need to do to resolve the issue
Any help would be greatly appreciated
Regards
Eddie

Customer replication from ECC to CRM

Hello everyone,
I am having some difficulty replication a customer from ECC to CRM.
In our environment, customers are generally created from CRM & then replicated to ECC.
Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
Since I am a SD Consultant, I was thinking of extending the customers in ECC.
I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
I cannot see any BDOC in SMW01 also.
Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
Do I have to check any additional objects which I need to check ?
Or is it that no settings means nothing created in ECC would come over ?
Can anyone guide me so as to understand why this is happening.
Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
Thanks
Vin
Edited by: vinit parkar on Aug 3, 2010 10:58 PM

Hi,
If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
Cheers
Binai

Replication of a BP in CRM as a FI Vendor in ECC for Grants Management

Hi,
We are implenting SAP CRM 7 with SAP ECC for Grants Management, integrated with FI AP (we're not using PSCD).
For BP replication we followed the next steps, however something looks it is incorrect because my BDOC still shows errors:
The middleware settings had been completed between the CRM and the ECC system.
- Site, Suscription and replication from CRM to SAP ECC are in placed
   -The next replication object are activated:
    -All Business Partners (MESG)   (BUPA_MAIN)
    -All Busines Partner Relationships (MESG) (BUPA_REL)
    -All Business Transactions (MESG)
    -Grantor Program Management
Also we implemented the next steps:
1) Define the number ranges for BP groupings in CRM: This number range would be internal in CRM and External in ECC.
CRM (IMG) -> Customer Relationship Management -> Cross-Application Components -> SAP Business Partner -> Basic Settings ->
Number Ranges and Groupings
2) Since the BP would be replicated as a BP in ECC we define the same number ranges in ECC too:
ERP (IMG) -> Customer Relationship Management -> Cross-Application Components -> SAP Business Partner -> Basic Settings ->
Define Groupings and Assign Number Ranges
3) Activate the post-processing framework: (Business processes CVI_02 and CVI_04 in Component AP-MD)
ERP (IMG) -> Cross-Application Components -> General Application Functions ->Postprocessing Office -> Business Processes->
Activate Creation of Postprocessing Orders
4) Activate PPO Requests for Platform Objects in the Dialog:
ERP (IMG) -> Cross-Application Components -> Master Data Synchronization -> Synchronization Control -> Synchronization
Control -> Activate PPO Requests for Platform Objects in the Dialog
Edited by: Lyda Osorio on Oct 9, 2009 7:25 AM

For CRM I had the following FM activated:
BPOUT     BUPA     100000     CRM_BUPA_OUTB_RENTED_ADDRESS     X
BPOUT     BUPA     200000     BUPA_MWX_BDOC_CREATE_MAIN     X
BPOUT     BUPA     300000     CRM_BUPA_OUTB_MARKETING_ATTR     X
BPOUT     BUPA     400000     VEND_MWX_CREATE_MAIN_BDOC     X
BPOUT     BUPA     1000000     BUPA_OUTBOUND_MAIN     X
BPOUT     BUPR     100000     BUPA_MWX_BDOC_CREATE_REL     X
BPOUT     BUPX     1000000     MDS_BUPA_OUTBOUND     X
CLEAR     BUPA     1000000     BUPA_OUTBOUND_CLEAR_FLAGS     X
CRMIN     BUAG     100000     CRM_BUAG_MWX_PROCESS_EXT_STRUC     X
CRMIN     BUPA     90100     CRM_BUPA_INBOUND_SET_BUAG_FLAG     X
CRMIN     BUPA     1000000     BUPA_INBOUND_MAIN_CENTRAL     X
CRMIN     BUPA     1100000     CRM_BUPA_INBOUND_MAIN_MD     X
CRMIN     BUPA     1200000     CRM_BUPA_BDOC_MAP_MAIN     X
CRMIN     BUPA     1400000     CRM_BUPA_KOREA_INBOUND_MAP     X
CRMIN     BUPA     2000000     ABA_FSBP_INBOUND_MAIN     X
CRMIN     BUPR     1000000     BUPA_INBOUND_REL_CENTRAL     X
CRMIN     BUPR     1100000     CRM_BUPA_INBOUND_REL_MD     X
CRMIN     BUPR     1200000     CRM_BUPA_BDOC_MAP_REL     X
CRMOU     BUAG     100000     CRM_BUAG_MWX_FILL_EXT_FROM_MEM     X
CRMOU     BUPA     1000000     BUPA_OUTBOUND_BPS_FILL_CENTRAL     X
CRMOU     BUPA     1200000     CRM_BUPA_OUTB_BPS_FILL_MD     X
CRMOU     BUPR     1000000     BUPA_OUTBOUND_BPR_FILL_CENTRAL     X
CRMOU     BUPR     1200000     CRM_BUPA_OUTB_BPR_FILL_MD     X
CRMOU     BUPR     1300000     CRM_BUPA_BDOC_BPR_FILL_DATA     X
EXTR     BUAG     100000     CRM_BUAG_MAIN_GET_ID_LIST     X
MERGE     BUPA     1000000     MERGE_BUPA_CENTRAL     X
MERGE     BUPA     2000000     MERGE_BUPA_FINSERV     X
MERGE     BUPR     1000000     MERGE_BUPR_CENTRAL     X
PXYIN     BUPA     1000000     BUPA_INBOUND     X
R3AOU     BUPA     100000     BUPA_MWX_BDOC_UP_CURRSTATE_SET     X
XIIN     BUPA     1000000     ABA_BUPA_MAP_PROXY_TO_DDIC     X
XIIN     BUPA     2000000     ABA_FSBP_MAP_PROXY_TO_DDIC     X
XIIN     BUPA     2100000     ABA_FSBP_MAP_PROXY_TO_DDIC_1     X
XIIN     BUPR     1000000     ABA_BUPR_MAP_PROXY_TO_DDIC     X
XIOUT     BUPA     1000000     ABA_BUPA_MAP_DDIC_TO_PROXY     X
XIOUT     BUPR     1000000     ABA_BUPR_MAP_DDIC_TO_PROXY     X

Replication of quotation and order from CRM to ECC

Hi experts,
We are trying to replicate a quotation and order created in CRM to ECC. We have maintained the same transaction types and item categories in both ECC and CRM. Is there anything else that is required to be done for proper replication??
Now while trying to replicate, we are getting this error: "Partners from account group 0005 are not permitted for partner function BP (Notification E VPD 000)"
How to solve this??
Please Guide.
Regards
Aakshi Suri

We maintained Partners from account group 0005 for partner function BP. Now we are again getting these errors:
u2022     Account Assigment Object Successfully Assigned to Item 0000000010 (Notification S C( 312)
u2022     SALES_HEADER_IN has been processed successfully (Notification S V4 233)
u2022     The sales document is not yet complete: Edit data (Notification W V1 555)
u2022     Sales document 0005000080 was not changed (Notification E V4 219)
u2022     Status "Obsolete status" of material 101123900 does not allow external procurement (Notification E ME 053)
u2022     Error in SALES_ITEM_IN 000010 (Notification E V4 248)
Is there any place where we can check the notifications??
Kindly help us in resolving this error.
Regards
Aakshi

Replication of Pricing Conditions between ECC and CRM

Hi All
I have a couple of queries regarding replication of pricing information between ECC_CRM. We maintain the filter settings for Pricing procedures, access sequences and condition types in the object DNL_CUST_CND_PR, and accordingly these are replicated from ECC to CRM. My Questions:
1. If some pricing procedure is created in CRM and this needs to be replicated to ECC, Can we achieve this?
2. Would DELTA be active on these objects, in the sense if some changes are made to a pricing procedure in ECC, would they flow automatically to CRM?
Thanks in advance
Best Regards,
Ram Sushanth

Hi Chandra and Swaroop
Thanks a lot for your response.
From your replies, now, this is my understanding (Pl correct me if am wrong)
1. Replication of Pricing Procedure from CRM to ECC is possible.
It would be of great help if you could elaborate on the procedure to do so or provide pointers for documentation in this regard.
Because, for replication from ECC to CRM, we perform an initial load on the object DNL_CND_CUST_PR or DNL_CUST_CNDALL.What is the object that we need to execute from replication from CRM to ECC?
2. DELTA would be active only on condition records, but not on Condition types and Pricing Procedures and if any pricing procedure is changed in ECC, we would need to perform Initial Load again.
Thanks in advance
Best Regards
Ram Sushanth

Replication of Material Sales status (with user values) from ECC to CRM

Hi all,
I 'm trying to find out how to replicate the sales statuses of the material master data in ECC (in view "sales", field DChain spec. status, MKVE-VMSTA) to the Material SAles statuses in CRM.
The sales statuses in ECC have been maintained (via menu SPRO/logistics general/master data/basic settings/settings for key fields/DAta relevant to sales and distribution)) : new specific values have been added to the standard ones.
Then, this customizing has been replicated to CRM via the DNL_CUST_PROD3 repliction object ( table TVMS).
I have also created a user status profile with values in CRM with the same values, and assigned with the configurator the status profile to the screen, so the values are selectable in the sales status in CRM (in header).
But, now, how can i replicate the sales statuses of the ECC materials to either :
-the product status (header) in CRM, or
-the sales status (distribution chain specific) in the assignment block of the Distribution-chain specific data ?
Is a specific development needed?
there are some existing notes (623026, 428989, 495764), but not clear about what is possible in terms of replication of statuses
thanks a lot

It seems that there is no mapping between ECC and CRM sales area.
If u want to download customer from ECC for that u have to mention the customer sales area in to the filter and then u have to start down load from ECC.

Vendor Number Range Conflict SAP ECC and CRM 2007

I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts). What is the best approach to dealing with this issue...
My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
eg SAP Vendor "50000001" equates to CRM "VEN50000001"
Is such as approach supported? Can you point me to the documentation that shows how such an approach could be implemented. What approaches have others done to address similar issues?
Thanks in advance
Eddie
By the way we are on CRM 2007 sp4

Hi Eddie,
SAP Note 1044637 - Customize Vendor Numbers
Implement the code present in the attachment. You can
change it according to your own requirements. The example code
suffixes 'VEND' before the first six digits of the vendor
number before it is downloaded to CRM.
Thanks,
Vaibhav Shah

Replication of Vendor (in ECC ) to CRM

Similar Messages

Maybe you are looking for