Report availability status (Group) in Em12c

help me please query for availability status (group) in EM12c,
i want show availability status all instance in one group, example i have dba group and my instance is : rodex, downhill, rundown
Instance_name      |    Avaibility Status (%)
rodex                         99%
downhill                      98%
rundown                     100%
anyone have query for this ?

2. You can create group with 3 DB Instances as it members.
The Group homepage would display the availability of all three instances
Create group following Section "Creating and Editing Groups" in Managing Groups .

Similar Messages

"Request for Reporting available " is not displayed after loading the data.

Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyee

Hi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy.

Purchasing Report: Plant, Purchasing group, material type, PO, GR No.

All SAP Gurus,
Is there any Purchasing report available which gives the information regarding:
Plant, Purchasing group, material type, PO, GR No., vendor, amount (all in single report only).
Regards,

Hi,
Refer following reports;
ME2N - List of PO Documents (In selection Screen use Scope of List - ALLES)
ME80FN - General Analysis (Here in Output, select option "PO History" by clicking on the button at extreme right)

Reports available for Project

What are the seeded reports available for Reporting.Consolidation Purpose in Projects.
I need following details --
1. Report for Monthly expenses for the Projects
2. Report for Project status like whether they are closed , Approved etc and the cost associated with these Projects along with Supplier Invoice info ,Associated Purchase Order etc .
3. Reports related to reconciliation
Any report which match some of the requirement will also serve my purpose .
Please help

Hi,
Below are some of the reports that may help in your requirement.
1. Report for Monthly expenses for the Projects:
You can look at the reports MGT: Expenditures Summary and MGT: Expenditures Detail
2. Report for Project status like whether they are closed , Approved etc and the cost associated with these Projects along with Supplier Invoice info ,Associated Purchase Order etc .
For the Supplier invoice info and PO : use the same MGT: Expenditures Detail report with the Expenditure Class as Supplier invoice
For Project Status: AUD: Project Configuration
3. Reports related to reconciliation
AUD: Cost Audit Report
AUD: Project Subledger Summary
AUD: Project Subledger: Detail by Expenditure Type
AUD: Project Subledger: Detail by Project
AUD: Revenue Audit Report
AUD: Supplier Invoice Audit Report
Hope this helps!
Thanks,
Sathish Raju
www.projectsaccounting.com

Standard reports using Corporate Group key

Hi Experts,
Can any one let me know the list of standard reports available in MM using the corporate group key (in vendor master)?
Suitable answers will be rewarded.
Thanks & Regards,
Pushparaj S.

Hi,
Some of the useful MM reports,
MB51 Material Doc. List
MB5L List of Stock Values: Balances
MBBS Display valuated special stock
MC$G PURCHIS: Material PurchVal Selection
MC$I PURCHIS: Material PurchQty Selection
MC.1 INVCO: Plant Anal. Selection: Stock
MC.2 INVCO: Plant Anal.Selection, Rec/Iss
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.A INVCO: Mat.Anal.Selection, Rec/Iss
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC48 INVCO: Anal. of Current Stock Values
MC50 INVCO: Analysis of Dead Stock
MCBA INVCO: Plant Analysis Selection
MCBC INVCO: Stor. Loc. Analysis Selection
MCBE INVCO: Material Analysis Selection
MCBK INVCO: MatGrp Analysis Selection
MCBR INVCO: Batch Analysis Selection
MCE1 PURCHIS: PurchGrp Analysis Selection
MCE3 PURCHIS: Vendor Analysis Selection
MCE5 PURCHIS: MatGrp Analysis Selection
MCE7 PURCHIS: Material Analysis Selection
MCW3 PURCHIS: Evaluate VBD Header
MCW4 PURCHIS: Evaluate VBD Item
ME2L Purchase Orders by Vendor
ME2M Purchase Orders by Material
ME2N Purchase Orders by PO Number
MIR6 Invoice Overview
MMBE Stock Overview
S_ALR_87012086 Vendor list
How to see the transaction value of sub-contracting for particular period?
In MBLB we can see the over all stock value at vendor side. If I refer it in MB51 (For particular period movement type as 541 and Specila stock as u201Cou201D it shows the local currency value is zero....)
How to see the stock value for Sale order stock for a perticular period?
In MBBS we can see the stock value upto date.
What is the report or transaction to check stock transfer?
MB5T - Diplay of Stock In Transit
Want to run a report which gives me a list for all open PO
ME2N - Selection Parameters - WE101 - Open goods Receipt
Tcode to view Slow moving & Fast Moving Items in Material Management module.
MC46 - Slow-Moving Items
MC50 - Dead Stock
Regards,
MBKM

BW Report Availability

As much as we would like all BW based reports available on time, all of the time, the reality is that some reports are not available to our user community due to data load failures e.g. master data, issues that require bug fixes etc .. Our business need to know which reports are available with most recent data. They need to know this without having to run the query and look at the "status of data" information. This would be inefficient when we consider many users all repeating the same check.
We are looking to develop a custom solution that will provide a data load status for all web templates in our system. The logic is along the lines of :
1. Get a list of all web templates
2. Determine the embedded queries
3. Find the related InfoProviders / Data Targets
4. Find the last request status and last load times of these Data Targets (along with any data staging objects before the report layer)
5. Consult a mapping table * (some objects should be loaded weekly, daily, monthly etc ..)
6. Report a status e.g. Sales Report OK last loaded 15.02.2005 08:00, Manufacturing Report NOT OK last loaded 14.02.2005 22:00 ..
We would like to define a web template <> load frequency mapping table. This will be used to determine what constitutes the red / green traffic light status of each web template. So, imagine that web template A contains queries that are based on an InfoCube that should be loaded every 24h - we would maintain this in the mapping table. The program would check the mapping table in relation to web template A. If the InfoCube was loaded 23h ago a green light status would be reported. If last loaded 26h ago, or loaded with a failed request, a red light status would be reported.
I would like to hear from anyone who would share solutions to similar requirements.
Philip Botterill, Nestlé

Hi David
You can do that within process chains. There you can define if you want to send a email in case of errors or successful execution of a certain step (e.g. after rollup of the infocube). You have to configure SAPconnect (Trx. SCOT) in your BW installation. Look at the Online documentation http://help.sap.com/saphelp_bw30b/helpdata/de/cc/bae93a2876a81ae10000000a11402f/frameset.htm
Kind regards,
Hansjörg Luzi

Reports available in the Business Package for MSS and ESS

Hi,
I have searched sdn.sap.com throughout looking for a comprehensive list of reports available in the business packages for both MSS and ESS, i got a little bit of joy and found some of the MSS reports but not all on sdn.sap.com, can anyone please advise where i would find such information on both these packages, just to re-iterate, i am looking for a list of reports these business packages offer? any help much appreciated.
Thanks
John
P.s any documents can be sent to [email protected]

@John
(1) ESS- We built our own custom PORTAL role/workset in which one of the worksets we created is called "Tools and Forms". Under that workset, we placed various pages/iViews that either are simple URL iViews that link to external documents and such (like vacation request forms since they do not do online leave requests yet) as well as a couple ot t-code iViews that run reports in ECC for the employee. Nothing very mind blowing there. Just some content creation on the portal side.....oh, and some config on the backend to create a Homepage Framework Area Page and all for it (I liked that part!)
(2) Wow....talk about perfect timing...I just had to document the way MSS sees the MDT reports in it's "reporting" area yesterday! haha Here goes the quick explaination....in configuration for MDT, you have various "scenarios". These kinda determine which "groups" of reports will show in MDT. For MSS for the Reporting webdynpro/service, the scenario is RPT0 (in ECC 5.0, at least). Soooo if you look at the function CODES assigned to RPT0, you will see several for Training and one for Accounting (Cost Centers)...you can reference the function CODES listed back to the "pool"/library of function codes a bit up/previous in the same config area for MDT(I think it is called "Define Function Codes"). However, there is one more piece you will see listed under RPT0....it is a DIRECT call to function MODULE "HR_HIS_READ" (this was a bugger to find because I could not find the "Maternity" report listed in the function codes and had to figure out where the heck it was coming from! haha). Anyways....what the function MODULE actually does is call the HR Information System (HIS) passing it the RPT0/MSS scenario. This returns the particular reports for Employee Data and Time&Attendance. You can see this if you run the HR_HIS_READ function directly and enter RPT0 for the second input value (first and third are not needed or you can just enter "*". Sooooo that is how the "magic" happens. Hope that explained it. From there, you can simply config you own scenario/reports to add into MSS if you like.
Hope this helped!

Finder is not correctly reporting available disk space

finder is not correctly reporting available disk space
my drive is 50% full but finder shows there is only @ 35% left
the difference is more than anything needed by the system
any ideas on what is causing the problem?

Try this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Report available for test cases (manual test script files uploaded)?

We upload our test script files to the "Test Case" tab, assign it a status. We are hoping to have a report that would report all test case files and their STATUSES.
In solar_eval, there is a standard SAP report for test case provided. However, the field "Status" for the test case file is not included in this report.
Is there any report available that would give us this status? If not, in which table does this data come from? Is there anyway to build a simple SQVI query to extract the list of test cases and their statuses?
Any help is highly appreciated!

Hi Jo,
It's not entirely clear on whether you are look for 'Status' values of the Test Case document itself OR for 'Status' values of the Test(s) conducted on such Test Case documents.
I believe the following two SOLAR_EVAL reports should resolve either ways:
(a) SOLAR_EVAL -> Project -> Configuration -> Assignments -> Documentation (Programme called is SAPLSPROJECT_SOLAR_DOC_EVAL_IM) , Tick only 'Test Cases' and switch off other tabs
(b) SOLAR_EVAL -> Project -> Test -> Test Plan Status Analysis
Best regards,
Srini

Vehicle availability status doubts

Dear sir,
Here they are using customized tcode to see the vehicle status(i.e if it is green-vehicle available,if it red-vehicle is breakdown).we could not able to find that in which table they have status information.
Now customer required management level report to see month wise vehicle available status.
how to take each day wise vehicle status-please let me know how to process
I have tried in JCDS table its not showing exactly day wise staus
Regards
Rajasekaran

Rajasekaran,
This query is technical centered. As you told this is a Z report, the traffic light status field comes from the logic in the program. This might be coded in a way that the code finds the User status/Sy Status of the Equipment (tables JEST, TJ02T/TJ30T etc) the depending upon that it assigns the green, red traffic light signal to a Zfield of the internal table. If this is the logic, you need to develop a program for management level report using the above tables (also EQUI). So this is an ABAPer's job.
KJogeswaraRao

Is there a report available:

Hi
Is there a report available:
selection on cost center group by cost element group that displays posted quantities as well or statistical key figures?
For the quantity the unit of measure should be selectable or for a statistical key figure I should be able to select one
thanks in advance
prasad

Hello
There are many standard reports under cost center, choose the appropriate one and try to change the layout and save it with a variant.
Under subsequent activities, a manager could change the out put layout of a cost center report.
Alternatively, you could create a simple query report with your desired fields. Check with ABAPer for some technical help.
Reg

BOM reports using a group of Materials

Hi all
I am looking at standard SAP BOM reports CS11, CS12, CS13. All of them require that I enter a Material number. Do we have standard reports where we can look at BOM using a generic group of materials example where multiple selection of materials is allowed, or selecting BOMs using for all materials belonging to a material group etc.
thanks a lot

Hi John,
There are no Standard reports available for BOM.
You may consider creating a query or an ABAP report.
If you are planning to develop a report you may use the Function module CSAP_MAT_BOM_READ which will list the BOM for a material in Internal tables
Regards,
Jayakandan

Posting key X Field status group

Hello,
How is it possible to define Field status group depending on Posting key.
Field status group is assinged to GL account.
However I can see that when I E.g. post to a customer account - when using different posting keys there are different field status variants in FB01.
I cannot find this is set up in SPRO.
Many thanks in advance,
Jan

Hi,
Field status can be determined through Posting key also. In OB41, click on any posting key and in the next screen Field status tab is available.
This can be used to configure Field status of document line item posting key wise.
Regards,
Gangadhar

Is workflow reporting available in SharePoint 2013?

Is there any reporting around workflows for SharePoint 2013? It appears (based on various posts) that there was a link called "View Workflow Reports" available in 2010 but that it was removed for 2013. My customer would like to see statistics
on active workflows, timestamps of approvals, status, phases, number of workflows in process vs. completed, time between steps, etc. Is any of this available in 2013? Thanks.

Hello,
If you want to view the history of a workflow, you can type the URL:
http://team-site-address/Lists/Workflow%20history/AllItems.aspx (please modify the URL to your site address) in the browser and check all the history of the workflow.
Here is the reference link
http://community.office365.com/en-us/f/154/t/85644.aspx
Hope this help!
Thanks!

List of Field information in Field status group

Hello guys,
I'm trying to build a list for several fields when creating a document to see what status (obligatory, disabled, etc.) the field got in several field status groups.
So the result should look like:
Field Status Variant
Field Status Group
Field
Status
0000
PH01
ZUONR
Obligatory
0000
PH02
ZUONR
Disabled
0001
PH01
ZUONR
Obligatory
0001
PH03
ZUONR
Optional
So I was doing some research here how to get this and I think I almost made it but some final information are not that clear at the moment.
(1) I read table T004F for getting the pattern of field status group with help of field status variant of company code (T001) and field status group of account (SKB1).
(2) Then I'm doing convert routine for '+.*' pattern and then know which field position got which status.
(3) Then I'm trying to match the status with the fields with help of tables TMODF, TMODG, TMODO, TMODP and TMODU, but I am not quite sure how to make it.
E.g. with help of tables TMODO and TMODP I can find the information which field is which position but it is only about the description of the field, not the technical fieldname. So I also got table TMODU with the technical fieldnames, but there I got several information for one field depending on account type (vendor, account, customer, ...). So which is the right one? Always 'account' even if it is reconciliation account for vendor? And which is the right FAUNA field information? Always 'SKB1-FAUS1' or where do I know which one to take?
The other way I tried is with function FI_GET_FIELD_SELECTION_STRING to get the pattern. This one depends on posting key to get the pattern. So where is the difference between this one and the manual select in table T004F without posting key?
Thanks a lot for your help! :-)
Regards
Michael

Gerd,
Have you tried txn SE41?
I had to do something similar with tab descriptions for Leads and used SE41.
I needed to know the program name or search for it. In my case it was SAPLCRM_ACTIVITY_UI then select the radio button 'Function List'.
Then when in the list you can change the headings.
Activate it then the new descriptions are available.
Regards
David

Report availability status (Group) in Em12c

Similar Messages

Maybe you are looking for