Report builder in BO - Removing trailling zeros

I have a field that can have up to 5 deciaml value like 0.12345.. But if the amount is 0.12300 i want to remove the trailling zeros so i would get 0.123 on my report. I have a formula for crystal report but i cant put the 'if' condition in BO Report builder.
Help please
Thanks to all

> I have a field that can have up to 5 deciaml value
> like 0.12345.. But if the amount is 0.12300 i want
> to remove the trailling zeros so i would get 0.123 on
> my report. I have a formula for crystal report but i
> cant put the 'if' condition in BO Report builder.
Hi Alain,
In Print Layout Designer, the Round function allows you to round decimal values to a selected (fixed) amount of decimals. However, this is not exactly what you are looking for. As far as I know, there is no way you could do the removal of trailing zeros in PLD. A common workaround (although a really ugly one) to this problem as well as to many other PLD problems is to do the processing with formatted search in a UDF and just print whatever you have in the UDF.
IMHO, the Print Layout Designer is by far the most frustrating component of B1. I don't mind that it's got a clumsy user interface, but the limited availability of fields&functions is just outrageous. To make things worse, it seems there are practically no significant improvements in the PLD for B1 2006.
Henry

Similar Messages

How to hide a report builder field if it is zero

I am using Coldfusion Report Builder. If the value of a feild is zero, how can I hide it or show a blank. Keep in mind this field is a DollarFormat() field.

scottnweber wrote:
I am using Coldfusion Report Builder. If the value of a feild is zero, how can I hide it or show a blank. Keep in mind this field is a DollarFormat() field.
When you click on the field in Report Builder, look near the bottom of the Properties window, in the "Print Control" section.
You will see an entry labelled "Print When Condition". Put an expression next to it that returns true or false.
For example, in your case, you would put something like the following:
MyField neq 0
Where "MyField" is the name of your field. This expression will only allow the field to be printed when its value is not zero.
Since you're targeting the value of the field you don't have to worry about the formatting that you used next to "Expression" in the "Data" section of the Properties window.

Report Builder: output to Excel removes leading zeros

I'm trying to use the Report Builder to output a numeric
field to EXCEL , but on numbers that start with zero EXCEL removes
the leading zero's. ex. 00123 becomes 123.
Is there something that I can put in the expression builder
on the field to overcome this.
I've tried concatonating a single quote on the front of the
field but the single quote shows up on the output. I've tried this
on both the SQL and on the expression builder.
I've read on some of the posts where people have tried using
'mso-number-format:"\@'" within a TD tag but I can't seem to get
the syntax right inside the Expression Builder.
Has anybody got any suggestions?

Excel will remove leading zeros in a numeric field because it is treating the column as numeric. Putting a ' in front of the number forces Excel to treat the column as text.

How to remove Built-in-Fields from Report builder report

I have create SSRS report which is sending email to recipient but at the bottom of report email I am also getting
report accessible address. I don’t want to send that address to recipient. How should I remove from report builder?
The report is accessible at the following address
<<Report address>>
Rahul

You have to change the report subscription, and untick the checkbox that says to also send it as a link.

Remove leading zeros in report

Hi all,
I do a clasical reoporting. Data in the internal table numeric types. But when writing in the report, is appearing as 000056 etc. I want to remove this leading zeros in the report output. Any helps?
Regards,
Mic.

Hi Michael,
     u can use the function module for removing leading zeros
      CONVERSION_EXIT_ALPHA_INPUT (adding zeros)
      CONVERSION_EXIT_ALPHA_OUTPUT (removing zeros)
Regards
Nagesh

Report Builder remove toolbar when running integrated report

Hi there,
I am using Report Builder 3.0.
I want to remove the toolbar (http://screencast.com/t/HDbGHZXz3vJa) when I am running some of my reports but not all of my integrated reports. Is this possible?
Thanks in advance :)

Hi chesternut,
According to your description, you want to hide the Toolbar in report manager when preview some reports. As far as I know, reporting Services provides default style (.css) files (usually in C:\Program Files\Microsoft SQL Server\MSRS%.MSSQLSERVER \Reporting
Services\ReportServer\Styles) that define styles for the report toolbar in HTML Viewer for Report Manager. So we can modify some default settings to customize the toolbar, but these settings would affect all reports in report manager.
In Reporting Service, we can hide Toolbar in specified reports by setting the Toolbar parameter to false as below:
http://<servername>/reportserver?/Folder/Report&rs:Command=Render&rc:Toolbar=false
For more information about URL access, please refer to the following article:
http://msdn.microsoft.com/en-us/library/ms152835.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

How to remove unused datasource connections in Report Builder 3

In Report Builder 3.0 using a wizard to create a new Report, select create a DataSet. It opens a "Choose a connection to a datasource" dialog box. It shows previously used datasource connections of other ReportSevers I have accessed long
time back. But I dont want to see datasource connection not in use. How can I remove those datasource connections used in past but they are still available in the list.

Hi Saty
You can find more information about Remove previously used datasource connections.
http://connect.microsoft.com/SQLServer/feedback/details/679232/cannot-remove-old-unusable-data-source-connections-from-report-builder-3-0-wizard-dialog
SUHAS http://suhaskudekar.blogspot.com/ Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.

Report builder bitmap output

hi everyone.
I RUN A REPORT FROM REPORT BUILDER USING DESTINATION PRINTER AND MODE BITMAP TO A HP PRINTER(DESCJET D3940) AND THE REPORT CREATE A SMALL EPS FILE AND PRINT IN 10 SECONDS.
WHEN I PRINT THE SAME REPORT TO A DIFFERENT PRINTER (HP DESCJET D2660) THE OUTPUT IS TOO LARGE AND PRINT IN 5 MINUTES.I AM USING WINDOWS XP AND REPORT BUILDER 10.1.2.0.2.

Excel will remove leading zeros in a numeric field because it is treating the column as numeric. Putting a ' in front of the number forces Excel to treat the column as text.

SQL Server 2008 R2 - Report Builder 3.0 - timeout using shared data source and stored procedure

I select the shared datasource from the data source propeties dialog, test the connection and everything is good.
I add a dataset by selecting "use a dataset embedded in my report" option within the Dataset properties dialog.
I select the newly added data source, click the "Stored procedure" query type and drop down the list box and select my intended stored procedure.
the timeout for the dataset is "0" seconds.
I click the "OK" button and I'm presented with the parameters to the stored procedure.
I enter valid data for the parameters and click the "OK" button.
I then get the following error message after 30 seconds:
The problem is, all of the timeouts, that I'm aware of, have values of zero (no timeout) or high enough values that 30 seconds isn't even close to the timeout.
I think the smallest timeout we have is 120 seconds.
I have searched this site and many others and the solutions all involve altering the stored procedure to get the fields into report builder and then revert the stored procedure back to its original form.
To me, this is NOT a solution.
I have too many stored procedures that need to be brought into Report Builder.
I need a real solution.
Thank you for you time, Tim Caldwell.
Timothy E Caldwell

I don't mean to be rude, but really, check to see if the stored procedure can return data rows???
Maybe I'm not being clear enough.
The stored procedure runs perfectly fine.
it runs perfectly fine in the production environment and the test environment.
I can access the stored procedure in several ways and have it return correct data.
I can even trick report builder into creating a dataset with parameters and run the stored procedure that way.
What I cannot do, is to get report builder to not timeout after 30 seconds on the initial creation of a dataset with a Query type of stored procedure.
I have seen this issues posted again and again and again on may different sites and the "solution" is to simplifiy the stored procedure by creating a stored procedure that has a create table and a select in the stored procedure and that's it. After
report builder creates the dataset the developer then has to replace the simplified stored procedure with the actual stored procedure and everything works fine after that.
HOWEVER, having to go through this process for 70 or more stored procedures is ridiculous.
It would appear that there is something within report builder itself that is causing this issue.
The SQL Script included is an example of a stored procedure that will not create fields create a dataset with fields and parameters in Report Builder 3.0:
USE [CRUM_IT]
GO
/****** Object: StoredProcedure [dbo].[COGNOS_Level5ScriptSP] Script Date: 11/17/2014 08:02:26 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[COGNOS_Level5ScriptSP]
@CompanyCode varchar(8) = null,
@GetSiblings varchar(1) = 'N'
as
Begin
-- get emergency contact info
select *
into #tmp_Contacts
from
(select
ConEEID,
con.connamelast as [Emer Contact Last Name],
con.connamefirst as [Emer Contact First Name],
con.connamemiddle as [Emer Contact Middle Initial/Name]--,
,ROW_NUMBER() over (Partition by ConEEID order by ConNameLast)as rn
,ISNULL(
case when con.conphonepreferred = 'H'
then '(' + substring(con.conphonehomenumber, 1, 3) + ')' + substring(con.conphonehomenumber, 4, 3) + '-' + substring(con.conphonehomenumber, 7, 4)
else '(' + substring(con.conphoneothernumber , 1, 3) + ')' + substring(con.conphoneothernumber , 4, 3) + '-' + substring(con.conphoneothernumber , 7, 4)
end,
) as [Emergency Phone]
from [ultiprosqlprod1].[ultipro_crum].dbo.Contacts con
where con.ConIsEmergencyContact='y'
and con.ConIsActive='y'
) A
where A.rn = 1
CREATE TABLE #tmp_CompanyCodes (CompanyCode varchar(8))
If @GetSiblings = 'Y'
Begin
INSERT INTO #tmp_CompanyCodes (CompanyCode)
EXEC [z_GetClientNumbers_For_ParentOrg_By_ClientNumber] @CompanyCode
End
INSERT INTO #tmp_CompanyCodes
values (@CompanyCode)
select *
into #tmp_Company
from [ultiprosqlprod1].[ultipro_crum].dbo.Company
where cmpcompanycode in (select CompanyCode from #tmp_CompanyCodes)
select distinct
cmpcompanycode as [Client ID],
CmpCompanyDBAName as [Client Name],
eec.eecEmplStatus AS [Employment Status],
eec.eecEmpNo AS [Employee Num],
rtrim(eep.eepNameLast) AS [Last Name],
rtrim(eep.eepNameFirst) AS [First Name],
isnull(rtrim(ltrim(eep.eepNameMiddle)), '') AS [Middle Initial/Name],
rtrim(eep.eepAddressLine1) AS [Address Line 1],
isnull(rtrim(eep.eepAddressLine2), '') AS [Address Line 2],
eep.eepAddressCity AS [City],
eep.eepAddressState AS [State],
CASE
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
THEN substring(eep.eepAddressZipCode, 1, 5)
ELSE rtrim(eep.eepAddressZipCode)
END AS [Zip code],
CASE
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
THEN substring(eep.eepAddressZipCode, 6, 4)
WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) > 0
THEN substring(eep.eepAddressZipCode, charindex(eep.eepAddressZipCode, '-', 1) + 1, 4)
WHEN len(eep.eepAddressZipCode) <= 5
THEN ''
END AS [ZIP + 4],
substring(eep.eepSSN, 1, 3) + '-' + substring(eep.eepSSN, 4, 2) + '-' + substring(eep.eepSSN, 6, 4) AS [SSN],
isnull(convert(VARCHAR(10), eep.eepDateOfBirth, 101), '') AS [Date Of Birth],
eetFED.TAXCODE AS [FED Tax Code],
eetFED.FILINGSTATUS AS [Fed Filing Status],
eetFED.EXEMPTIONS AS [Fed Exemption Allowance],
eetFED.ADDITIONAL AS [Additional Fed Withholding],
eetSIT.TAXCODE AS [SIT Tax Code],
eetSIT.FILINGSTATUS AS [State Filing Status],
eetSIT.EXEMPTIONS AS [State Exemption Allowance],
eetSIT.ADDITIONAL AS [Additional State Withholding],
isnull('(' + substring(eep.eepPhoneHomeNumber, 1, 3) + ')' + substring(eep.eepPhoneHomeNumber, 4, 3) + '-' + substring(eep.eepPhoneHomeNumber, 7, 4), '') AS [Home Phone],
isnull((SELECT cod.codDesc
FROM [ultiprosqlprod1].[ultipro_crum].dbo.Codes cod WITH (NOLOCK)
WHERE cod.codCode = eep.eepEthnicID
AND cod.codDosTable = 'ETHNICCODE'), '') AS [Race-Origin], --eep.eepEthnicID AS [Race-Origin],
eep.eepGender AS [Gender],
isnull(convert(VARCHAR(10), eec.eecDateOfOriginalHire, 101), '') AS [Original Hire Date],
isnull(convert(VARCHAR(10), eec.eecDateOfSeniority, 101), '') AS [Seniority Date],
isnull(convert(VARCHAR(10), eec.eecDateOfTermination, 101), '') AS [Termination Date],
isnull(eecTermType,'') as [Termination Type],
isnull(TchDesc, '') as [Termination Reason],
rtrim(eec.eecJobCode) AS [WC Code],
isnull(eec.eecJobTitle, '') AS [Job Title],
pgr.pgrPayFrequency AS [Pay Frequency],
eec.eecFullTimeOrPartTime AS [Full/Part Time],
eec.eecSalaryOrHourly AS [Pay Type],
isnull(convert(MONEY, eec.eecHourlyPayRate), 0.00) AS [Hourly Rate],
isnull(eec.eecAnnSalary, 0.00) AS [Annual Salary],
[YTD Hours],
isnull(eep.eepNameFormer, '') AS [Maiden Name],
eec.eecLocation AS [Location ID],
rtrim(eec.eecOrgLvl1) AS [Department ID],
eec.eecorglvl2 AS [Cost Item],
eec.eecorglvl3 as [Client Project],
eec.eecPayGroup as [Pay Group],
isnull(eepAddressEMail,' ') as [Email Address],
isNull(BankName1,' ') as PrimaryBank,
isNull(BankRoute1,' ') as PrimaryRouteNum,
isNull(Account1,' ') as PrimaryAccount,
isNull(AcctType1,' ') as PrimaryAcctType,
isNull(DepositRule1,' ') as PrimaryDepositRule,
isNull(BankName2,' ') as SecondaryBank,
isNull(BankRoute2,' ') as SecondaryRouteNum,
isNull(Account2,' ') as SecondaryAccount,
isNull(AcctType2,' ') as SecondaryAcctType,
isNull(DepositRule2,' ') as SecondaryDepositRule,
isNull(
CASE
WHEN DepositRule2 = 'D'
THEN '$' + convert(varchar, cast(EddAmtOrPct2 AS decimal(10,2)))
WHEN DepositRule2 = 'P'
THEN convert(varchar, cast((EddAmtOrPct2*100) AS decimal(10,0))) + '%'
ELSE null
END,' ') as SecondaryDepositAmount,
isNull(BankName3,' ') as ThirdBank,
isNull(BankRoute3,' ') as ThirdRouteNum,
isNull(Account3,' ') as ThirdAccount,
isNull(AcctType3,' ') as ThirdAcctType,
isNull(DepositRule3,' ') as ThirdDepositRule,
isNull(
CASE
WHEN DepositRule3 = 'D'
THEN '$' + convert(varchar, cast(EddAmtOrPct3 AS decimal(10,2)))
WHEN DepositRule3 = 'P'
THEN convert(varchar, cast((EddAmtOrPct3*100) AS decimal(10,0))) + '%'
ELSE null
END,' ') as ThirdDepositAmount,
Supervisor,
eec.eecEEID AS [Employee EEID],
eec.EecJobCode As [Job Code],
isnull(eec.EecTimeclockID,' ') As [Time Clock ID],
con.[Emer Contact Last Name],
con.[Emer Contact First Name],
con.[Emer Contact Middle Initial/Name],
con.[Emergency Phone]
from [ultiprosqlprod1].[ultipro_crum].dbo.empPers eep WITH (NOLOCK)
inner join [ultiprosqlprod1].[ultipro_crum].dbo.empComp eec WITH (NOLOCK)
ON eep.eepEEID = eec.eecEEID
inner join #tmp_Company cmp WITH (NOLOCK)
ON eec.eecCOID = cmp.cmpCOID
inner join [ultiprosqlprod1].[ultipro_crum].dbo.PayGroup pgr WITH (NOLOCK)
ON eec.eecPayGroup = pgr.pgrPayGroup
left outer join [ultiprosqlprod1].[ultipro_crum].dbo.TrmReasn
on tchCode = eecTermReason
left join (select CAST(sum(isnull(eee.eeeYTDHrs,0.00))AS DECIMAL(18,2)) as [YTD Hours],
eeeEEID,
eeeCOID
from [ultiprosqlprod1].[ultipro_crum].dbo.EmpEarn eee with (NOLOCK)
group by eeeCOID,eeeEEID)eee
on eec.eecEEID = eee.eeeEEID
and eec.eecCOID = eee.eeeCOID
left join (SELECT eetCOID AS COID,
eetEEID AS EEID,
eetTaxCode AS TAXCODE,
eetFilingStatus AS FILINGSTATUS,
eetExemptions AS EXEMPTIONS,
eetExtraTaxDollars AS ADDITIONAL
FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
WHERE eetTaxCode = 'USFIT'
)eetFED
ON eec.eecCOID = eetFED.COID
and eec.eecEEID = eetFED.EEID
left join (SELECT eetCOID AS COID,
eetEEID AS EEID,
eetTaxCode AS TAXCODE,
eetFilingStatus AS FILINGSTATUS,
eetExemptions AS EXEMPTIONS,
eetExtraTaxDollars AS ADDITIONAL
FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
WHERE eetTaxCode like '%SIT'
AND eetIsWorkInTaxCode = 'Y'
)eetSIT
ON eec.eecCOID = eetSIT.COID
and eec.eecEEID = eetSIT.EEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName1,
eddEEBankRoute BankRoute1,
eddAcct Account1,
EddAcctType AcctType1,
EddDepositRule DepositRule1,
EddAmtOrPct EddAmtOrPct1
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '99')edd
ON eec.eecCOID = edd.eddCOID
and eec.eecEEID = edd.eddEEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName2,
eddEEBankRoute BankRoute2,
eddAcct Account2,
EddAcctType AcctType2,
EddDepositRule DepositRule2,
EddAmtOrPct EddAmtOrPct2
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '01')edd2
ON eec.eecCOID = edd2.eddCOID
and eec.eecEEID = edd2.eddEEID
left outer join (SELECT eddCOID,
eddEEID,
eddEEBankName BankName3,
eddEEBankRoute BankRoute3,
eddAcct Account3,
EddAcctType AcctType3,
EddDepositRule DepositRule3,
EddAmtOrPct EddAmtOrPct3
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
WHERE eddSequence = '02')edd3
ON eec.eecCOID = edd3.eddCOID
and eec.eecEEID = edd3.eddEEID
left outer join (SELECT eecCOID,
eecEEID,
rtrim(eepNameLast) + ', ' +
rtrim(eepNameFirst) + ' ' +
isnull(rtrim(ltrim(eepNameMiddle)), '') AS [Supervisor]
FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpComp WITH (NOLOCK)
join [ultiprosqlprod1].[ultipro_crum].dbo.EmpPers with (NoLock)
on eeceeid = eepeeid)eec2
ON eec.eecSupervisorID = eec2.eecEEID
left outer join #tmp_Contacts con
on eep.eepEEID = con.ConEEID
order by [Client ID],
[Last Name],
[First Name]
drop table #tmp_Contacts
END
Timothy E Caldwell

Problems with report builder 3.0 in SCCM 2012 R2 CU2

Hi All
I have problems with editing (Using Report builder) existing reports or creating new ones in SCCM 2012 R2 CU2
We version of SQL we use is SQL 2008 R2 SP2
I already asked this question in the SCCM 2012 forum but the problem is not related to SCCM but has something to do with application report builder
I changed the registry key and edited the Microsoft.ConfigurationManagement.exe.config.xml as described in the following link
http://blogs.technet.com/b/smartinez/archive/2012/07/03/system-center-2012-configuration-manager-create-report-don-t-work-what-do-i-do-now.aspx
Afterwards I try to edit an report I see report builder is being downloaded and after it generates the following error “Application did not succeed. Unable to continue”
Error details are
Following errors were detected during this operation.
* [22-7-2014 13:55:07] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at
System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions
options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
And in the SmsAdminUI.log I noticed the following error
[16, PID:4460][07/21/2014 14:11:43] :[ReportProxy] - User-specified default Reporting Point [Server1.local.nl] could not be found, [Server2.local.nl] is now the default Reporting Point.
[1, PID:4460][07/21/2014 14:11:11] :System.InvalidOperationException\r\nThere is an error in XML document (1, 1).\r\n at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
I removed the reporting point no luck -> I already installed report builder 3.0 local on my computer still no luck.
I hope someone can give me some advice , I am lost with this error
Thx in advance
Regards
Johan

Hi Miss Katherine,
1. I went through the SQL steps in the link you posted
2. I updated the Reg Key and Microsoft.ConfigurationManagement.exe.config file with 3.0 on both the
server and the console machine.
3. I copied the .DLL file from your OneDrive and replaced the existing one on the server.
4. I uninstalled and re-installed the reporting role on the server and received the 1015 in the log.
5. I restarted the server and the client machine
I do get a slightly different error now after using the new DLL
Errors With Original DLL
ERROR DETAILS
* [9/30/2014 8:42:03 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.DeploymentERROR DETAILS
Errors With New DLL
ERROR DETAILS
Following errors were detected during this operation.
* [9/30/2014 9:17:13 AM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the downloaded assembly Microsoft.DataWarehouse.dll.
- Source: System.Deployment

SSRS- report builder showing recent sites and server as blank

Hi All,
A client of ours when executes Report builder is not able to see Report models as report builder just gets open but do not create connection to server.
We have done the following settings for same:
Used both name and IP of system and added the same to Trusted Sites in IE settings
Also we have used port number along with URL for report builder.
We have given all rites to user on reporting services (SQL)
But it is still not showing report models.
Kindly help us. It is very urgent.
Thanks in advance
-Regards
Kumud

Hi Kumud,
According to your description, your client can't see the created report models in Report Builder. Right?
In this scenario, the reason why the client can't see the report models because he doen't connect to report server. Please click the
Connect at the left bottom of Report Builder and type the report server url manually to reconnect the report server.
If the connection is failed, please check if there any process on client side which occupies the port for report server URL. Here are two articles for your reference to do troubleshooting.
Report Builder 3.0 error : Connection Failed. Unable to connect to the server that is specified in the URL
Connecting to Report Server
Since the Semantic modeling language (SMDL) report models are deprecated. Although you can you continue to use existing report models as data sources in SQL Server 2012 or later version Reporting Services reports you should consider updating your reports
to remove their dependency on report models.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Report Builder 2.0 User Password Change Issue

A user changed her password (domain account) this morning and can no longer open the query designer (we are using an SSAS data source) or run a report in Report Builder 2.0. She can still access the SSRS front end report manager reports with no issue (and she enters her new password).
When clicking Run for a report in the Report Builder 2.0 the following error message displays:
The request failed with HTTP status 401: Unauthorized.
When trying to open the Query Builder for a dataset in the Report Builder 2.0 the following error message displays:
An existing connection was forcibly closed by the remote host
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
A connection cannot be made. Ensure that the server is running.
The security log in the applicaiton event log on the report server logs the following with each failed attempt:
Unknown user name or bad password.
Three other users have recently reset their passwords and had no issue with Report Builder 2.0. I am thinking that her password may be cached or saved within Report Builder 2.0 and it keeps using her old password. I have had the user reboot and uninstall/reinstall Report Builder 2.0 but neither fixed the issue. It appears after uninstalling that all application data was not removed as recent reports show after reinstalling and I was not prompted for login credentials again. I had our domain admin reset her password back to what it was before she changed her password and all issues in Report Builder 2.0 went away and she could use the Query Builder and run the reports. I need to figure out how to let her change her password and have Report Builder 2.0 work though. Any help is greatly appreciated.

Sorry, going to Options > Settings and clicking "Clear all recent item lists" didn't work for me. My login credentials are still cached, and I'm not prompted to log in, when I launch Report Builder.
I'm running Win7 Professional, IE10. I cleared my browser cache as my first attempt to clear the login, but that didn't work. I even cleared again, making sure to select to clear stored passwords/logins, but that didn't clear it, either.
Best regards,
Brad

Report runs in Report Builder but hangs in Report Server

Hi,
I am using Oracle Reports 10g to build a report with many formula columns. Everything was working perfectly till I added some condition in a query in formula columns. After adding it, report is not working in Report Server but runs only in Report Builder. If I removed this condition, report runs OK but I need it. This condition is very simple, just filtering be a decoded column (i.e. stts = 'D')
Can anyone suggest how to solve this problem?

Hi,
what is the application server version you are running your reports on?
If it is 10.1.2.0.2 to 10.1.2.2 and you are using PDF SUBSETTING (check the [PDF:Subset] section in the uifont.ali file in your server) then you are most probably facing Bug:5029259 . To resolve the issue read further Doc ID 363868.1 in Oracle Support. In short, your options are:
1. apply patchset 10.1.2.3 or maybe patch 5029259 is enough.
2. or make sure no NULL values are returned in the report. Use nvl where possible. If there was no problem before making the changes then maybe checking the new formula columns would be enough. I made this change myself when facing this issue and it appears that this resolved the problem.
3. or change REPORTS_ENHANCED_SUBSET to NO in windows registry if under windows or $ORACLE_HOME/bin/reports.sh if under linux. REPORTS_ENHANCED_SUBSET=YES is necessary if you are using TTF subsetting, though. So this might not be an option.
Julius Z

Report width in report builder 6i

Hi Experts,
I am working on report builder 6i reports. I want to increase the report width in the layout.
I click on layout, properties, i changed the width to 700 for header, body and footer section.
But when i run the report from concurrent program, it's giving error.
Error: REP-1212: Object 'Body' is not fully enclosed by its enclosing object
Could some body help me, how to fix this issue.

Hi,
Thanks for your reply. To get rid off that error, i did the following thing.
I set the width as 132, and height as 62 of header, main body and trailer section in report builder.
In Concurrent program window also, i set the column as 132 and rows as 62, and style as BAC.
When i submit the report through concurrent program, it's working fine.
Now i changed the width of the report to 200 and height to 66.
Now, i want to change the style to A4 in concurrent program window. I don't have A4 style in list of values. I went to SYSTEM ADMINISTRATOR ---> INSTALL --> PRINTER --> TYPES. (Added A4 style to all types)
Now i changed the columns to 200 and rows to 66 and style as A4.
Now, it's showing below error.
ERROR: APP-FND-00314:INVALID PRINTER.
Again i selected BAC style and try to submit the program, it's giving different error.
REP-1219: 'Body' has no size - length or width is zero.
Could somebody help me to solve the issue. (Why it's giving above error after adding the A4 style to all types of printers) and why did i get the previous errors (REP-1212, Body fully not enclosed).
Kindly help me, it's urgent.
Thanks.

Report Builder - Last page issue and Report Footer issue

I am using ColdFusion 9 Report Builder, am new to this product and encountering 2 issues.
Issue 1 - I have a field that I would like to print on the last page of my report. How can I determine the last page? I initially tried using a calculated field set to the 'highest' calc.Page_Number. Then I could compare the current page to the last page in the 'Print When' property. But calc.Page_Number can not be used in a definition of a calculated field.
Issue 2 - Depending on the amount of report detail, sometimes my report footer prints alone, without a page header and page footer. The report includes this page in the total number of pages. For example, if it is a 2 page report, the page header on page 1 will display Page 1 of 2. Then the only data on Page 2 is the Report Footer. No page header or page footer prints.
Any assistance on these issues would be most appreciated. To date, using the Report Builder has not been easy.

To issue 1: The report contains a report band called report footer. thsi is always at the last page. The report footer band initially is collapsed, so you have to expand it by dragging the last band divider.
To issue 2: I guess this is a page break calculating error when detail data reaches really near the page footer area.
Try some experiments with different setting of the following properties/issues:
- in elements, e.g. calculating fields in the bands between report detail and page footer: In Properties / Print Control / Printing Options: Activate the option "Remove line when blank". This will remove the whole report band area if this field is blank. May save some empty space.
- try to remove unused empty space between detail rows.
- try to resize and reposition all detail fields so that they snap to the grid.
Best regards

Report builder in BO - Removing trailling zeros

Similar Messages

Maybe you are looking for