Report carrier

Dear Friends
There is a requirement for which we need to extract a report
Requirement
""Measure the carrieru2019s ability to pick up goods at the warehouse, on time, and measure the warehouse ability to have the items ready on time for collection by the carriers""
Formula
1) Turnaround time = the time between the truck arrives at the warehouse and the time between
it leaves the warehouse
2) % of refused trucks or containers = number of trucks or containers refused / the number of
trucks or containers that arrived at the warehouse gate
3) % on time pick up = collection on time / number of scheduled daily shipments
Friends please suggest me where can i take all the table & field names for developing a new report or any existing report is already available?
Required table & filed names
Company code (production plant or sales and distribution company)
Warehouse
Carrier
Turnaround time
% of refused trucks / containers
% on time pick up in hours
Month
Day
time truck arrival
time truck departure
Turnaround time
number of trucks or containers refused
number of trucks or containers total
% of refused trucks / containers
Number of collection on time
number of scheduled daily shipments
% on time pick up in hours
Regards
Prakash

soltion identified

Similar Messages

Report carry forwarding the current month 2weeks data to next month

Hi experts,
Issue statement:
XXXXX Procurement reports in MSTR (MRP Adhoc report) is showing weeks out of order, the last 2 weeks of a current month are carried over to the first two weeks of the next month (ie, working week 33-ww34 from August are repeated as the first 2 weeks of September, therefore September will have 7 weeks, ww33 to ww39), this happens month over month, this issue is probably making the EOH calculation to be wrong and most likely any other calculations. Materilas need this report to place PO's based on inventory levels and so far the data is not trustable and wrong. Need this to be fixed asap. Thanks a lot.
we running the process chain the Job set to clear every 2 weeks data, could you plz let me know why it geting current month 2weeks data to next month.

thanks

Report data restriction based on SAP ID - Authorization in BI 7.0

Hi Friends,
In our project the requirement of restriction of report is as follows.
There are two reports
1. Carrier View Report
2. Carrier Drilldown Report
Carrier View which is on Multiprovider is main report and Carrier Drilldown report, which is on DSO (ODS) is RRI report.
Carrier Vendors (these are vendors taking care of transporting the goods to customer locations from plant) will be viewing these reports. We have a master data maintained for Carriers as Carrier ID. The report has this Carrier ID in rows. Each carrier vendor would be given a SAP ID for logging into BW WEB reports.
Security Requirement: When a carrier execute report, the data in the report should be restricted to Carrier ID associated with the SAP ID which he is using.
Kindly suggest us the steps to do it, I am not basis person, but I need to help him.
Thanks and regards,
Balaraj

Hi Balaraj,
You can use <a href="http://help.sap.com/saphelp_nw70/helpdata/en/66/019441b8972e7be10000000a1550b0/frameset.htm">Analysis Authorizations</a> in BI. Use transaction RSECADMIN to create authorizations and user assignments.
You need to declare Carrier ID Infoobject as Authorization relevant. Analysis authorizations are not based on authorization objects. Instead, you create authorization for each carrier that include Carrier ID characteristic and some restricted value(s) for the characteristic. You can then assign this authorization to one or more users(SAP IDs). When ever a query with Carried ID is executed, It checks for the analysis authorizations and hence he can acess only those values that are assigned in his own authorization.
Instead of assigning the corresponding Carrier IDs values for each authorization manually, you can create a single authorization for Carrier ID and fill in the values of the authorization using <a href="http://help.sap.com/saphelp_nw70/helpdata/en/91/a62c42fb6fdd2ce10000000a1550b0/frameset.htm">Authorization variables</a>. In this case in the customer exit you need to use the master data maintenance of SAP ID and CARRIER ID and fill in the values of E_T_RANGE depending on the user name SY_UNAME.
Assign points if you find it helpful.
Regards, Uday

KE5Z : UserExit or SAP Note for adding new fields in the report output

Hi,
I want to add 2 new fields in KE5Z (Profit Center: Actual Line Items) report output.
Order reason(AUGRU), Sales Document Type (AUART) fields.
Is there any UserExit or SAP Note available for this....
Thanks in advance,
fractal

Hi Fractal,
See if Note 92864 will help you.
Summary
Symptom
Through a modification, it is possible for you to include additional fields in the profit center line-item reports 'actual' and 'plan' (Release 3.1*).
Additional key words
KE5Z, KE5Y, RCOPCA02, RCOPCA08 -
SUPPORTGUIDE 20010613143936 -
REPORTWRITER,
SGRW_OM SGRW_PS SGRW_PC SGRW_SL SGRW_PCA SGRW_EC SGRW_LIS
Cause and prerequisites
The fields must be located in table GLPCA (for actual) or GLPCP (for plan).
For Release 3.0F, you should ensure you have applied Note 62511 first.
Solution
To include a field in the actual line item report, proceed as follows:
Call the ABAP/4 Dictionary (Transaction SE11) and display table GLPCA. You can then find in a line the field name and data element for the field you want to include.
Return to the initial screen of the ABAP/4 Dictionary. Now change the structure RPCA2. If the structure does not yet contain the field, you select Edit -> Insert field; enter the field name and data element. Do not insert the new field at the beginning of the structure but in the rear half of the structure.
Then save and activate the structure.
Now call the ABAP Editor (Transaction SE38). Change the source code of program RCOPCA02. Insert the lines set out in the attachment in FORM routine FIELDCAT_FILL. When you do this, replace SGTXT by the field name of the field. If you normally want the field to be displayed when you the access the report, delete the line afield-no_out = 'X'. "<<<< insert Note 92864 .
You should note that the place where you insert the lines influences the position of the column in the report list.
To include a field in the Plan-line-item report, carry out the same procedure except with table GLPCP, structure RPCA8 and program RCOPCA08.
Note: Pls check if these 2 fields are available in any of the layout versions you have available with the transaction.
Cheers,
Vikram
Pls reward for helpful replies!!

Vendor balances are wrong in transaction J1GVL

Hi SAP gurus,
The balances in the transaction J1GVL coming from the previous fiscal year are not correct.
I would like to let you know that this issue came up after the SAP version upgarde and had been resolved on July and suddenly we realised that with no reason we do not see the correct balances in Vendor ledgers.
We have carry forwarded the balances using Tcode GVTR earlier it was showing correctly now we have seen some wrong opening balances are appearing in J1GVL report (carry forward balances are increased in all the cases)
Please share your experience if you have faced similiar issue in past.
Regards,
SATVIR SINGH

Hi
I am getting below error message which executive transaction FAGLGVTR
Ledger ZD cannot be carried forward using this transaction
Message no. GU631
Diagnosis
You want to carry forward ledger ZD but have selected a transaction that is not able to do this.
System Response
The balance cannot be carried forward.
Procedure
Display the available ledgers using the input help or use the following transactions:
General ledger (table GLT0): Transaction F.16
Execute function
Special Purpose Ledger: Transaction GVTR
Execute function
Flexible General Ledger (table V_GLFLEXT): Transaction GLGVTR
Execute function
Regards,
SATVIR SINGH

Use of Correspondence In T&E

Hi all,
Watz the use of Correspondence in T&E Management.IF it is for Notification for the attendees regarding the Events that are going to take place then how can we do that using Wizard in IMG settings.....
I couldn't understand watz Correspondence so plz gimme a reliable answer.

Correspondence
Use
The Correspondence function lets you output notifications for the various activities and
transactions that arise in Training and Event Management.
Features
_ You can output notifications in Training and Event Management either automatically or
manually.
You must first carry out the step Assign Notification Abbreviations and Activities [Ext.] in
Customizing for Training and Event Management.
Forms that serve as templates for the documents you want to output are assigned to the
notification abbreviations.
_ You can set up automatic output of notifications to a predefined output device or medium for
certain activities in Training and Event Management.
The output media available include printer, e-mail, fax and telex. If you do not specify an
output medium, there is no automatic output.
_ From the recipient list, you can access a print preview of the notification you want to output
(for manual output).
_ You can call the manual output function in the dynamic Attendance Menu under Attendance
_ Correspondence
When you use the manual output function, you have the additional option of downloading
documents into MS Word Form Letter.
_ Each item of correspondence output is recorded in a correspondence history that logs what
notifications are output to whom.
See also:
The documentation for the Customizing activities in Training and Event Management under Dayto-
Day Activities _ Correspondence.
Manual Output of Correspondence
Use
This function lets you manually trigger output of documents to business event attendees and
instructors in Training and Event Management.
This function supplements the automatic output function in that it lets you output documents
manually as required if errors occurred during automatic output or you require additional
documents.
Features
_ Output to any medium, for example, printer or Internet mail.
If you select a medium for manual output, you override the standard settings made in
Customizing for Training and Event Management under Define Attendee Type
Specific Output Control [Ext.].
If there is no medium set in Customizing and you do not specify one for manual
output, documents are output to printer by default.
_ Output using the Microsoft Word Standard Letter function
This function is only available with manual output.
_ Output to screen
_ Display print preview of notification
_ Display log of documents output
_ Display correspondence history for recipients
Activities
1. You access this function on the SAP Easy-Access screen under SAP Standard Menu _
Human Resources _ Training and Events _ Attendance _ Correspondence _ Manual
Output or in the Attendance Menu under Attendance _ Correspondence _ Manual Output.
2. You enter an activity and a notification abbreviation (assigned to a specific notification).
3. You select an output medium as required.
4. You specify the business event and attendees for which you want to output the notification.
5. You use the functions available on the recipient list screen (for example, print preview or
download to MS Word).
6. You trigger output.
Outputting Correspondence Manually
Procedure
1. On the SAP Easy Access screen, in the SAP Standard Menu choose Human Resources _
Training and Events _ Business Events _ Attendance _ Correspondence _ Manual
Output.
2. Enter the required activity and a notification abbreviation.
3. Choose data screen.
4. Enter the business event for which you want to output notifications.
5. Enter an attendee type where relevant.
6. Enter an attendee corresponding to the attendee type specified.
Entries 5 and 6 are optional. If you make no input, all attendees booked are
proposed as recipients.
7. Enter the number of N.N. notifications (for group attendees) you want output.
8. Choose .
List screen:
1. Select the attendees in the recipient list for whom you want to output notifications.
2. If required, change the default output medium (multiple selection possible).
3. Use the functions available on the recipient list screen, where required:
Print preview
MS Word
MS Word Standard Letter
Screen output
Display log
Display booking data
Display correspondence history
4. Choose .
Result
The notification is output to the selected output medium.
Correspondence History
Use
The Correspondence History function records the individual items of correspondence output for
activities in Training and Event Management.
If you set output to automatic, you can use the history function monitor document output.
For example, you can use the history function to report on what documents have been sent to
attendees in a given time period or if and when an attendee received definite confirmation of
registration, a cancellation notification and so on.
Features
You can request reports with the correspondence history functions from four different
perspectives:
_ From the perspective of the event type
If you enter a business event type, all documents that have been output in connection
with the business event type, such as prebooking notifications, are listed.
_ From the perspective of the event
If you enter a business event, all documents that have been output in connection with the
business event, such as confirmations of registration, are listed.
_ From the perspective of the output agent
If you enter an output agent, the report lists all documents that have been output
manually or automatically by the agent in question. For example, if a booking operation
triggered automatic output of notification to the recipients, these notifications are listed.
_ From the perspective of the recipient
If you enter a recipient, the report lists all documents that have been output to the
recipient you enter.
Within the various views, you can select data to narrow down the report's output:
_ Document recipients
_ Booking priority: you can request a report on all of the notifications output to waiting list
attendees, for example.
_ Selection period: you can specify a time period yourself or select a predefined one.
_ Output status: you can select from the following statuses:
_ No output
_ Errors during output
_ Output triggered
_ Output successful
_ Activity (logical function code).
You can start the correspondence history function from the Attendance menu. There,
you can select a business event type, an event date, or an attendee. By doing so,
you select the data for the report.
Activities
1. On the SAP Easy Access screen, in the SAP Standard Menu choose Human Resources _
Training and Events _ Correspondence _ History. The Correspondence History selection
screen appears.
2. You specify the perspective from which you want reporting carried out: event type, event,
output agent, or recipient.
3. You enter a document recipient if required.
4. You can specify the attendee group by selecting a booking priority.
5. You can specify the reporting period for the correspondence history.
6. You can select one or multiple output statuses.
7. You can specify a particular activity by selecting a function code from the list displayed.
8. Choose Execute.
The system outputs a correspondence history based on the selection criteria you specified.
Regards,
Amit
Reward all helpful replies.

Naming of multiple Date Dimensions - Logical Layer

I would like to get some advice on the following:
I am currently in the process of organizing all the dimensions and facts. During the organizing I have 12 different Date Dimensions. Some facts are join to 6 of those Date Dimensions. With each of the date dimensions, all of them have the same number of columns and names. Therefore, if I am creating a report, carry over the month of Delivery Date Dimension - Calendar Month lets say and Cancel Date Dimension - Calendar Month and then proceed to the results tabs, you will see two columns "Calendar Month" You wont know which one is from the Cancel Dimension or the Delivery Date Dimension. So we have to manually rename them in OBIEE. But I would like to rename them in the BMM/logical layer instead so the end user doesn't have to rename them each time. What I would like to get advice on is how did you implement the naming of multiple Date Dimensions. Cancel Date Calendar Month or Cancel MM etc? I don't want it too long then the column is very wide in the report.
Any advice is much appreciated!
thank you,
Jonathan

Thank you,
I read almost every best practice, but not much information around the Date Dimensions, just wondering if anyone has some great ideas around the Data Dimensions?
Thanks
Jonathan

Urgent - "Vendor balances carried forward and line items report."

Hello,
Is there any report which will give me the vendor balance carried forward and the line items during that period.
==============================================
Format-
eg: statement taken from 1.8.2006 to 30.9.2006 is required as
Bal b/f 25000 cr.
3.8.2006 Purchase Inv XXX 3000 cr.
5.9.2006 Payment Chq XX 26000 dr.
Bal c/f 2000 cr.
==============================================
Please advise on this.....
Regards,
J

thanks for the response, but i have already tried those transactions.
FK10N will give me the periodic bal statements and NOT line items display which will also have balance carried forward.
F.41 and F.43 again gives the periodic and line items...but i want the vendor balances to be in the format given above..
like say, account statement.
Please advise............
Regards,
J

Financial reporting and balance carry forward at Line item level

Hello
We are in the process of implementing a new GL and using it to create Balance Sheet and P&L statements in BW.
We have installed the new datasource for GL line items 0FI_GL_14 and loaded the data to a DSO. Installed the 0FI_GL_10 (totals infosource) as well.
Also we created a custom infocube on the line items DSO and want to use it to report against a Financial Statement Version. In order to do that we created a
virtual cube with the FM and added the necessary Financial Statement Item and other key figures in the virtual infocube.
Now I want to know is it the correct way to create financial reports?
Can we load totals and Line items to the same infocube? Do we have to load totals to a different DSO/Cube or same Cube?
How do we address the Balance Carry Forward on the Line items cube? Since the balance carry forward is done on totals only, and the cube I created is a detailed cube is it possible to carry forward balances at that level?
Also can someone let me know what is the best approach to create financial reports and give drill down capability at the document level?
Thanks in Advance
Raju Kosuru

Now I want to know is it the correct way to create financial reports?
NO .. Its not.
Can we load totals and Line items to the same infocube?
NO
Do we have to load totals to a different DSO/Cube or same Cube?
Yes.. SAP has delivered C10 for Totals and O14 for line items... No point in creating cube for line items i.e. on top of O14.
Balance carry forward can be done on totals only (that is how totals extractor _10 is designed), U can not do that on the Line items. Pls contact functional consultant for clarification
Best approach is RRI (Jump targets) for _10 report to _14 report to give drill down capability at the document level.

Summary Report is carried over to other reports when the reports

Hi ,
Did anybody have an experience of a customized invoice report that needs to show invoice summary amounts in all pages if the invoice has more than one page? My company requires that the summary amounts have to be at the bottom of each page.
I created three repeating frames (A, B1 and B2). A is the invoice line group. B1 and B2 are in the same group of invoice header. B1 is the invoice customer information and B2 is the invoice summary information. In this case, I can force B2 stay at the bottom.
The invoice report will be fine if only one invoice is printed (the summary amounts will show up at all pages if the invoice page is more than one). But the problem will appear if a user tries to print mutiple invoices at the same time, i.e., run report in range. The summary amounts in the first invoice will be carried to all other invoices, which means that the summary amounts do not reset at invoice level.
Please help!!!

Hi FJK,
Thank you for your quick response!
The invoice will print the summary amounts at all pages when a user prints one invoice at a time. The summary amounts will not display correctly if muitlple invoices are printed at the same time (I have parameters of invoice_number_low and invoice_number_high that allows users to print invoices in range). The summary amounts in the first invoice will be carried to other invoices, which are not correct.
Sean

Error "Multi-level error propagation carried out" when I run a report

Hi All,
When I run the report /SAPAPO/CDPS_REPT - Order and Resource Reporting with the below criteria I getting error "Multi-level error propagation carried out"
Planning Version - Simulation Version XXX
Evaluation Start - 05/03/2011
Evaluation End - 12/31/2013
Evaluation List - Extended Operation List
I do not get error when I run the report with selection as Active version 000 and Evaluation List as Order List, Operation List.
I have tried by ruuning Live cache consistancy check, but the issue is not fixed
Please help me to resolve this issue
Thanks & Regards,
Rajkumar

Hi Jack,
Please do post the server log file here so that we can try and find a solution for the problem you are facing.
I had a problem a while ago with the app server too. While trying to run an application, after a few times, it would give me an error message saying the Application Server cannot be started. I rebooted my machine and thankfully it worked again. Just try this too and see if it works.
If it doesnt we can go through the server log and try to identify the cause of the problem.
Cheers :-)

Balance not carried forward when changing fiscal year in Report Painters

Hello guys,
Im using report painter (FGI3) to create my financial statement report, when i change to fiscal year 2009, the balance in my balance sheet is not carried forward to year 2009, its only shows the the movement.
Assume, the total asset in dec 2008 is 10million, transaction in januari is -900.000,
the total asset in januari 2009 should be 9.1 million, but it only shows -900.000
Sorry my english not so good
Anyone can help..
Thanks.
Edited by: rama dazkia on Feb 2, 2009 3:16 AM

Thanks for the reply,
I've already doin the year-end activities, if i see the balance in F.01 it is correct
but in my report painters especially in january 2009, it only shows the difference
FYI, i using report painters FGI3, FGI5
Thank you

New GL implemented, problems in F.01 and trail balance report and balance carry forward.

Dear Friends,
One of the my client recently implemented New GL in the Dev system, and getting posted the documents. now we are facing the many problems in the Dev system.
1. F.01 Financial statement report not generating for the year 2008 to till 2014 fiscal years.
2. the same in trail balance also not generating data form the year 2008 to till 2014 fiscal years.
3.system is asking the carry forward the balances form the 2008 to till, when we try to carry forward the 2008 year amount only forwarding for the all the fiscal year, not adding the other balances.
i went through some forums and i did the some analysis on this, after implementing new GL the table GLT0 was desble, data was not updated in the GLT0 all the data has been moved to FAGLFLEXT table. later i activated the table GLT0 and able to storing the data both the tables.
now i want to see the all my privious year report in the DEV system. all the data is there in the tables expect GLT0. how can i recover reports as well as how can i do the carry forward balances?
even still i have not carry forward for the 2014 balances, those balances also not there in the reports? but data is there in the table.
Please help me on this.
Regards,
Krish

Hello,
balance carry forward is done with TCd.
FAGLGVTR
when you are on SAP nGL.
any further quesitions?
By the way why don´t you do searching?
all the best erwin

Stored Procedure parameter (@Carrier) used in report and can't be set via code

I have a report that has regular Crystal parameters that I am setting correctly via code. However, one report actually uses one of the database parameters from the stored procedure that the report was created from. It is the only report like this and I'm using the same code in an attempt to set it's value. Although no error is thown, if I look at the parameter value in the IDE it is set correctly, but the field on the report just shows up blank. I have changed the way the report is created. Previously, I used the report.export method to create the actual file via a stored procedure. Now, I'm running the stored procedure first and creating a datatable. This allows me to execute the SP only once to see if it has data, because only then do I want to create the actual report. I'm using the SetDataSource method to pass the datatable into Crystal and then using the report.export method to create the report with data. Everything seems to work, except this stored procedure parameter (@Carrier) is not actually being populated to display on the report.
Not sure what to look at. Any suggestions?
Thanks.

crpe32.dll is version 13.0.5.891. This was developed in VS2012 and VB.NET. I'm using ADO.Net to connect to a MS SQL Server database.
MainReport.SetDataSource(DTbl)
bRC = PopulateAllSubReports(MainReport)
If Not bRC Then Throw New Exception("Received an error in PopulateAllSubReports.")
bRC = PopulateCrystalParameters(MainReport, SP)
If Not bRC Then Throw New Exception("Received an error in PopulateCrystalParameters.")
'Actually create the output file.
bRC = ExportData(MainReport)
Private Function PopulateCrystalParameters(myReportDocument As ReportDocument, SP As ReportStoredProcedureCrystal) As Boolean
     Dim myParameterFieldDefinitions As ParameterFieldDefinitions = Nothing
     Dim myParameterFieldDefinition As ParameterFieldDefinition = Nothing, ParamValue As String = ""
     Dim bRC As Boolean, Param As SqlParameter = Nothing
     Try
     myParameterFieldDefinitions = myReportDocument.DataDefinition.ParameterFields
'*********************Report Parameters***************************
     For Each myParameterFieldDefinition In myParameterFieldDefinitions
          myParameterFieldDefinition.CurrentValues.Clear()
          Select Case myParameterFieldDefinition.ParameterFieldName.Trim.ToUpper
          Case "@CARRIER"
               If SP.DBParameters.ContainsKey("@CARRIER") Then
                    Param = SP.DBParameters("@CARRIER")
                    ParamValue = NullS(Param.Value).Trim
                    bRC = SetCurrentValueForParameterField(myParameterFieldDefinition, ParamValue)
                    If Not bRC Then Return False
               End If
          End Select
     Next
     Return True
     Catch ex As Exception
     GmcLog.Error("ReportKey = " & Me.ReportKey.ToString & ", " & ex.Message, ex)
     Return False
     End Try
End Function
Private Function SetCurrentValueForParameterField(myParameterFieldDefinition As ParameterFieldDefinition, submittedValue As Object) As Boolean
     Dim currentParameterValues As ParameterValues = Nothing
     Dim myParameterDiscreteValue As ParameterDiscreteValue = Nothing
     Try
     myParameterDiscreteValue = New ParameterDiscreteValue
     myParameterDiscreteValue.Value = NullS(submittedValue).Trim
     currentParameterValues = New ParameterValues
     currentParameterValues.Add(myParameterDiscreteValue)
     myParameterFieldDefinition.ApplyCurrentValues(currentParameterValues)
     Return True
     Catch ex As Exception
     GmcLog.Error("ReportKey = " & Me.ReportKey.ToString & ", " & ex.Message, ex)
     Return False
     Finally
     myParameterDiscreteValue = Nothing
     currentParameterValues = Nothing
     End Try
End Function
Private Function SetDBSourceForSubReport(mySubReport As ReportDocument) As Boolean
     Dim myTables As Tables = Nothing, myTable As Table = Nothing, DTbl As DataTable, SP As StoredProcedure = Nothing
     Try
     myTables = mySubReport.Database.Tables
     For Each myTable In myTables
          Dim SPName As String = myTable.Location.Substring(0, myTable.Location.IndexOf(";"c))
          SP = New StoredProcedure(ConnectionString, SPName, CommandType.StoredProcedure)
          DTbl = SP.FillTable
          mySubReport.SetDataSource(DTbl)
          SP = Nothing
     Next
     Return True
     Catch ex As Exception
     GmcLog.Error("ReportKey = " & Me.ReportKey.ToString & ", " & ex.Message, ex)
     Return False
     Finally
     If Not SP Is Nothing Then SP = Nothing
     If Not myTable Is Nothing Then myTable = Nothing
     If Not myTables Is Nothing Then myTables = Nothing
     End Try
End Function
Private Function PopulateAllSubReports(myReportDocument As ReportDocument) As Boolean
     Try
     Dim mySections As Sections = myReportDocument.ReportDefinition.Sections
     For Each mySection As Section In mySections
          Dim myReportObjects As ReportObjects = mySection.ReportObjects
          For Each myReportObject As ReportObject In myReportObjects
               If myReportObject.Kind = ReportObjectKind.SubreportObject Then
                    Dim mySubreportObject As SubreportObject = CType(myReportObject, SubreportObject)
                    Dim subReportDocument As ReportDocument = mySubreportObject.OpenSubreport(mySubreportObject.SubreportName)
                    Dim bRC = SetDBSourceForSubReport(subReportDocument)
                    If Not bRC Then Return False
               End If
          Next
     Next
     Return True
     Catch ex As Exception
     GmcLog.Error("ReportKey = " & Me.ReportKey.ToString & ", " & ex.Message, ex)
     Return False
     End Try
End Function

Budget Carry forward report

Hi,
i am working for one of the client where they have carried forward the budget for some of the internal orders and for the rest of the internal orders budget is yet to be carried forward.
is there any report whereby i can find out for which internal orders budget has been carried forward to the next year & for which internal order budget carry forward is still pending
Regards
Jyotsna

Hi Jyotsna
I dont there is any such report... Ideal way would be to run KOCO... Create a Variant and execute for all the Orders(A to ZZZZZ or 1 to 99999999)... Those orders where Budget is already carried forward, will automatically get exlcluded
br, Ajay M

Report carrier

Similar Messages

Maybe you are looking for