Page break not applying when using sub report inside main report

I have a main report inside which there is subreport (using SQL Server 2012). I placed some page breaks inside subreport but they were not working. I read on technet forums that this is a a known issue with SSRS.
One solution I found is to put a table inside main report, then in first row add a rectangle and set its property "Add a page break after" and then add subreport after this rectangle in that table in main report. I did that and now in some cases
it does show sub report on a separate page but sometimes it shows subreport on same page.
Could it be because in some case sub report has no or less data (hence it cannot cover whole page) and in that case it will always show on one page? How can I show empty subreport on a separate page?

I fixed it by clicking both "Add a page break before" and "Add a page break after" in rectangle.

Similar Messages

Auto exposure not applying when using the auto enhance function

I am on Aperture 3.6 and Yosemite. I use a Canon 6D and shoot in RAW. When I am doing the batch auto enhance to my shots, I find that even though in the adjustments preset Auto Enhance includes auto exposure, often it is actually not applied. Are there anyways to fix this? The images actually are a bit underexposed and I now need to go through picture by picture to click on the auto button under adjustment. Thanks.

Have you set your camera to use Canon's Highlight Tone Priority? Then most of the Raw files will be underexposed, because Aperture is developing the RAW file "as is" and not applying the in-camera settings. See Keith Barkley's user tip.
The Big Three: Setting your camera for the best Aperture RAW results

Page tiles not showing when using Adobe Muse and Web marketing hosting

Hello
I have created a muse site that has the correct page titles showing in the browser when using the web basics hosting. But I need the same site to now contain a blog so have changed the hosting to web marketing, this has resulted in the pages not showing their page titles in the browser
Does anybody know why this is or what I can do about it?
thanks for any info
regards
Martin

Page title should not change with site plan change unless it is done manually , or if modified file is uploaded from Muse.
Please check the titles added on page if they exist or not, if still same issue , provide the site url.
Thanks,
Sanjit

Users with a https home page are not redirected when using web-passthrough on WLC 5508

I have a Cisco 5508 running version 7.0.116.0. This controller hosts an open public wifi that requires users to accept a terms agreement via a Web-Passthrough setup that redirects them to the terms splash page. For most people this works without any issue. However, if a user has their homepage for their default browser set to a https site, such as https://www.google.com, then they are never redirected to the terms splash page. The page will just spin and spin until finally they get a timeout error.
Has anyone else had this experience? If so did you find a solution or is this some sort of short coming of the controller?
Any and all comments/information is appreciated!
Thanks,
Jim

This is a known issue (see bug ID CSCar04580).
CSCar04580 Bug Details
web auth (redirect) doesn't work when client users a https url
Symptom:A client whose home page is an HTTPS (HTTP over SSL, port 443) one will never
be redirected by Web Auth to the web authentication dialog. Therefore, such
a client will not know to authenticate, and will fail to connect to the
network.
Workaround:The client should attempt to open any HTTP (port 80) web page.

Shortcuts not applied when using installer-dec extension jnlp

Hi,
I have written an installer for my application, it does some copying tasks and ask the user for some init issues.
I have successfully created the two jnlp's required to launch the installer and then the application. Now, I changed the success behaviour of the installer so it asks for a restart.
Problem is, Shortcuts for running the application are placed on desktop/startup folders only when application is first run. when the computer is restarted there are no shortcuts. So the user most find the web location again in order to run the program, this is not the behavior i was looking for.
My main jnlp:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.6+" codebase="http://XXX.XXX.com/jws" href="testSP.jnlp">
    <information>
        <title>Title</title>
        <vendor>Vendor</vendor>
        <description>ServicePoint</description>
        <icon kind="shortcut" href="xxx.ico"/>
        <icon kind="splash" href="xxx.splash.jpg"/>
        <offline-allowed/>
        <update check="always"/>
        <shortcut online="true">
            <menu submenu="StartUp"/>
        </shortcut>
    </information>
    <security>
        <all-permissions/>
    </security>
    <update check="timeout" policy="always"/>
    <resources>
        <property name="publish-url" value="$$context/publish"/>
        <property name="xxx.logdir" value="logs"/>
        <j2se version="1.6+"/>
        <extension name="setup"     href="installer/installer.jnlp"/>
        <jar href="sp/TestSP.jar"/> 
    </resources>
    <application-desc main-class="xxx.sp.Loader"/>
         
    </application-desc>
</jnlp>My Installer jnlp:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0" codebase="http://xxx.xxx.com/jws/installer" href="installer.jnlp">
    <information>
        <title>Setup</title>
        <vendor>Vendor</vendor>
     <offline-allowed/>
    </information>
    <security>
        <all-permissions/>
    </security>
    <resources>
        <j2se version="1.6+"/>
        <jar href="SPInstaller.jar" download="eager"/>
    </resources>
    <installer-desc main-class="xxx.sp.Installer"/>
</jnlp>This is the request for restart:
installerService.installSucceeded(true);Any help will be greatly appreciated,
regards,
Raanan

Well, No guessing. fixed the syntax, apparently extensions needs to appear after all the jars.
New Main JNLP:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.6+" codebase="http://xxx.xxx.com:8081/jws" href="xxx.jnlp">
    <information>
        <title>title</title>
        <vendor>vendor</vendor>
        <description>ServicePoint</description>
        <icon kind="shortcut" href="xxx.ico"/>
        <icon kind="splash" href="xxx.splash.jpg"/>
        <offline-allowed/>
        <shortcut online="true">
            <menu submenu="StartUp"/>
        </shortcut>
    </information>
    <security>
        <all-permissions/>
    </security>
    <update check="timeout" policy="always"/>
    <resources>
        <j2se version="1.6+"/>
        <jar href="sp/testSP.jar" main='true'/>
        <jar href="sp/messages.jar"/>
        <jar href="sp/SP.properties.jar"/>
        <jar href="sp/TrackerRuntime.jar"/>
        <extension href="installer/installer.jnlp"/>
        <property name="publish-url" value="$$context/publish"/>
        <property name="logdir" value="logs"/>
    </resources>
    <application-desc main-class="xxx.sp.Loader">
         
    </application-desc>
</jnlp>Still the same problem.

Images on Facebook do not appear when using different web browsers

Images on Facebook do not appear when using Safari on my Macbook Pro (I've tried Google Chrome too with the same result). This makes me think it's a setting within OS Mavericks that I'm missing. I have not seen this issue on any other computers. This only occurs on my, and others' profile pictures on my profile page and on the news feed, not photos that are posted in albums or on walls. and yes, i have images enabled in Safari.
In safari the images don't appear, and in their place is a small blue "?" square >>.
In Chrome it appears as a broken image link >>
Has anyone encountered this? Is there a fix? It is very annoying.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Getting error "Object variable or with block variable not set" when trying to open a FR report in studio

Problem Description
We are on FR 11.1.2.2.305 installed on AIX. a user is getting this error: "Object variable or with block variable not set" when trying to open a FR report from FR studio client installed on windows xp . Initialy, we thought it may be a FR client installion issue. We uninstalled and cleaned up registry and did a fresh installation of the client but the issue still persists. The FR server and the client are on the same version.
The user is a LDAP user who is facing the issue. We have confirmed with other users and they dont have any issue accessing FR report from their own client but when they try to connect from the users machine who is having issues, the others users also see the above error. All the users are ldap users and all belong to same shared services groups so the provisiong is the same.
Any input will be appreciated.
Thanks

OK, in this case of one single computer, please make sure that settings as per below KB document as in place and then validate the issue:
Internet Explorer (IE7, IE8, IE9 and IE10) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
The information in this document applies to the following Enterprise Performance Management products:
    Calculation Manager
    Data Relationship Management (DRM)
    Enterprise Performance Management Architect (EPMA)
    EPM Workspace
    Essbase Administration Services (EAS)
    Financial Data Quality Management (FDM)
    Financial Management (HFM)
    Financial Reporting
    Foundation Services
    Interactive Reporting
    Planning
    Shared Services
    Web Analysis
Thanks!

No style applied when using light framework and WPC content

Hi,
Iu2019m facing a strange behavior, and Iu2019m almost pretty sure that is an error in the WPC, but I decided to post it here, maybe someone can confirm it. When using both, Light Framework and WPC, for some reason, the text inserted in the WPC containers, using the Web Forms, doesnu2019t appear correctly (no style/font applied), but viewing the same information, using the Default Framework Page, it works correctly.
Any hint?
Thanks and Regards,
John

Hi,
The reason why I decide to use Light Framework, itu2019s because Iu2019m creating an EFP, and Iu2019m using the WPC to publish the content (articles, news, and link list), using the standard Web Forms.
The problem is, after adding to a WPC Page something so simple like an article (using the Web Form Article), no Portal iView, HTMLB or other stuff included, the preview of the WPC Page using the Default Framework Page is ok, but when using the Light Framework Page, the text in the article doesnu2019t have the correct font-family. It looks like there are some styles missing in the Light Framework Page, that WPC content is expecting.
Thanks and Regards,
John

I have some web pages that loaded completely when using 3G but partially loaded using Wifi.

I have some web pages that loaded completely when using 3G but partially loaded (only text without any images ) using Wifi. Is it a site specific issue?

Can you rule out the NoScript extension as a cause of the issues on those sites? Even if you allow the main site to run scripts, often a website will spread its content over additional servers, so you may need to visit the "S" button menu a second or third time to get full functionality. (Over time, you'll recognize some the servers as being for ads, tracking, or sharing buttons and you can just let those parts of the page not work.)

HT1338 all of sudden comcast and facebook pages do not load when i try to access them on my mac. all other websites are fine. any one out there having the same issue?

all of sudden comcast and facebook pages do not load when i try to access them on my mac. all other websites are fine. any one out there having the same issue?

That's just not right - I mean, it really wrong to have to use a Windows machine to access your Facebook account. Can you pull up Comcast on IE as well?
Something's going on and I'm surprised that deleting your cache and cookies for those sites didn't work.
Let me fool around a bit - what's your primary browser?
Curious,
Clinton

When I go to yahoo with my iPhone 6 the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong?

When I go to yahoo with my iPhone 6 the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong? Also the same on boyfriends phone he's eith Virgin and I'm with Vodafone do it cant be the providers.

Thanks for the link but none of those described the problem. No error message pops up. It just says "Accessing Itunes Store" but it never actually does. This only occurs when my iPhone is plugged in though.

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation!

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic? Is this possible?

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?

You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library.

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

Module borders not displaying when using Aggregator

I am using Captivate 4. I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
Thank you.

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Page break not applying when using sub report inside main report

Similar Messages

Maybe you are looking for