Report Designer Result Row question

Hello Gurus
I read that in the report desinger you can grab the result row feilds from the inserted query and place it another report section but where do get that i don't see those cells showing up anywhere in the feild catalog.
basically i have two queries in the report designer and i want to use the result rows from both and divide them to get another result row
any ideas how can i do that
thanks

Well i have two queries inserted and the first problem is for the first query there is no footer section and the result rows are displaying as part of detail. I can't figure that out . Although the chararchterstic that i have there is a heirarchy unless thats a problem.
and for the second query i do have result row show up on yellow when i run it and in report structure i do see the group0 , then group header group1, and then footer so where is the result row the footer row or in detail. And once i have it what do i jst drag the row into the row in added report section.
please its urgent
thanks

Similar Messages

  • Report Designer: paint rows

    Hi
    i've created a report with report designer and now i want to paint the rows with colors one after the other, but in RD i've just one row which represent the only characteristic i have (products) and that just after the execution in the portal give me a long list of products.
    Thank you for the patience and the help.
    Antonio

    I think it's still a new product and not people have played with this, have a look at the link below.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f3/6eecc7c0c111d296020000e82de14a/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]

  • Hierarchy results row problem

    Hi All,
    I have a Hierarchy on infoobject 0MATERIAL. When we execute the report, the results rows are only shown for some nodes but not for others of the same level. The setting "Root/Totals Item Appears Above" is set. Also, the characteristic 0MATERIAL is set in the query to always display results.
    Can you help me in sorting this out?
    Cheers

    Hello,
    Please let me know how did you set the following setting in query :
    "Root/Totals Item Appears Above" 
    Thanks in advance.
    WIth regards,
    Anand

  • How to display Average, not Sum, in the "Overall Result" row of a report?

    Every report I look at or execute that has an Overall Result row always shows a total(sum) of all the cells in the column.  I recently came across one that shows the average of all the cells in the column and after looking at the query in BEx Query Designer 7.0 and BEx Analyzer 7.0 I cannot seem to find out where to set this.  All of the Key Figures are listed as "Nothing Defined" in the Calculations tab which is exactly what they should be, but where can I set that yellow-highlighted Overall Result row to calculate an average, not a sum?
    Example can be found in this picture:
    http://img87.imageshack.us/img87/6757/pic1yp.jpg
    Thanks for the help!

    My issue was that I was setting my KF's to 'Calculate Result As: Average' within the Query View that I was editing but the change was not showing on my screen when I have that View opened within the Analyzer.  Infact, it still is showing totals.  But when I execute my Web Template that references this Query View, the graph does display the result row using Averages.  Seems to just be a visibility bug, but it is now working.
    Thanks for the reminder about that property KP,
    Scott

  • Query designer - supress result rows

    Dear Friends,
    I do have created a query using query designer. I dont want result rows in my reports both in web template and analyzer. Could anyone help me on defining the same globally?
    Regards
    Oops

    Hi,
    You need to select characteristics against which results are displayed for key figures.
    In all charcteristcics properites you may find that.
    I hope it will help.
    Thanks,
    S

  • "Result" row not appearing for the Structure record in Bex Designer.

    Hi
    In BI BEx Designer,
    under Rows-> click any Characteristic-> Display Tab-> Result Rows: "Always Display" Option controls Last Row named "Result" (yellow colored) after the actual data reports ends.
    But i am not finding this thing for the structure.
    Actually my this report is based on 'Structure-> 2 selections' under Rows; once i run this query i get data without yellow colored 'Result" row at the end of report. I wanted to maintain the symmetry with other reports.
    Could u pls let me know how to get Query last "Result" record if i use only structure under the rows.
    Thanks...

    I limit the selection to display in one page, i see the overrall result but i've a result to show up after a Characteristic (result row option 'Display with more than one single value'), it works fine in BEx but not in web.
    for the other query, yes i do KF in the report.
    thanks

  • How to add different query results in Report designer

    Hi,
    I am creating a report based on 3 queries.  At the end i need to show total of 3 query results.
    How can i add results of queries in report designer??
    thanks in advance

    Hi Siva,
    As u said that u want to show the results of the queries through report designer but i think it is used for formatted reports .
    If u want to see tha results of diffrent query then u can use workbook .
    In workbook u can also analyse reports easily by applying slice and dice techniques .
    from different queries result set will be displayed on workbook with formatting  and good look and feel.
    regards,
    Supriya

  • How to hide the all rows except the result row in a report?

    Hi Experts,
    We have a report in which the user is interested to see only the result rows and I need to HIDE the characteristics in the rows. I was successfull in doing the same for Key figures in columns using "Calculate single value as suppress result". But I am not finding a way out to hide the characteristics in the rows.
    If I move the characteristics in rows to Free characteristics, the result row is not getting dispalyed. Also, the characteristics are  used dynamically by the formulae in columns and hence i cant remove these characteristics from the query. . The user wants the query to contain only one characteristic in the row and the result row for the key figures in columns. The report currently displays Invoice level data for each customer and this needs to be eliminated and it should display the summarised  data for every customer. Please suggest how this can be accomplished
    Regards,
    Kavitha

    Moving the char to free char will show the equivalent of result.
    Your issue likely is that this breaks the calculations since you do want the calculations done at detail level.
    To achieve this, move your char to free char (say it is 0CUSTOMER).
    For the CKF/Formula, go to aggregation tab, set the exception aggregation as Total (or whatever it was in standard behavior) and specify reference characteristic (in this case 0CUSTOMER), also check the 'Before aggregation' if you have that checkbox there.
    This will ensure the calculation is done at detail level even though the char is not included in the rows.
    If you have multiple chars to be moved to free char but included in detailed calculation, you will need to build cascading CKFs (CKF1 with ref char1, CKF2 eq to CKF1 with exception aggr on ref char2...and so on).
    Added:
    I understand you do want 0CUSTOMER in there, but something else (let us say 0DOCNO) removed. Use 0DOCNO in place of 0CUSTOMER in the case described above.
    Edited by: Ajay Das on Aug 5, 2009 8:57 AM

  • WAD result row in the name of the WAD report

    Hi,
    My requirement is we need to show summary of the result rows in front of WAD report output. Is it possible by any means please let me know.
    amit

    our requirement is top management should get summary report like this e.g
    WAD output as of now we have.
    > costing report (Heading of the report) (compress)
              > Query result  (at the top or at the bottom)
    I need Query result should appear at top level before clicking on heading costing report.
    Please let me know if anything required above.
    amit

  • How to suppress Result rows in a Query in Web Application Designer

    Hi
                 I am trying to post a query in Web Application Designer. I am able to run the query in WAD but the Results rows appear. I choose Suppress Result Rows always in All Characteristics option in the query in BEx Explorer but still i see result rows in the WAD. Can anyone please let me know how to suppress Result rows so that they dont appear in Web Application Designer.
    Thanks,
    Padma

    To get the enhanced menu-
    1. Open the template in WAD.
    2. Go to Web Item properties.
    3. Go to Entries in Context Menu.
    4. Find the "Enhanced Menu" property. Set it to "display" if you want it to be visible in template result.
    5. Next time when you execute your template you will be able to access it by right clicking.
    or
    If you just want to supress results without adding enhanced menu in the context menu, simply set "Calculate result as" to "No Display".

  • 3.5 Query Designer has 'row' in the footer of results but 7.0 has 'page'

    3.5 Query Designer has 'row' in the footer of results but 7.0 has 'page' is there a way to change 7.0 to have 'row' instead of 'page'? We would prefer to see how many rows of data we have. I didn't know if this was a parameter they may be able to be changed.
    Thanks,
    Diane

    I donot think there is way to display Row instead of Page.
    Also in 7.0. It is based on cells.

  • Query Designer - Formulas in Results Row

    Hi,
    Is it possible to have a formula based purely on values in the results row? e.g.
                              Col A      Col B           Col C   ColDl
    Results Row       4             5                 1          40%
    Where Col D is Col A as a percentage of the total. I can create a formula for individual rows but not for the results row where it just seems to sum individual percentages.
    Thanks

    Hi Gaurav,
    i have done what you have suggested:
    In query designer > Properties for a Key Figure > Calculations > Calculate Result As > Nothing Defined,
    I have set that, despite the rows are calculated as per formula defined in the key figure but the result field is not. The formula is only applied for the rows but not for the result. The result is olthough i have the setting you suggested a summation of that whole column and thats wrong.
    Can you or anybody else help.
    Thanks and regards,
    Murat

  • Charts in Report Designer - choosing columns and rows for categories

    Hi,
    I am trying to create a pie chart in report designer from a data provider which has 4 rows and 4 columns. As a default the chart created is using the 1st row for data and the four columns as categories.I want the pie chart  to use the first column for categories and 2nd column for data. How do I change the default chart behaviour?
    Best regards,
    Jai

    Hi Jai,
    take a look at:
    "Class 1 Chart Types" in http://help.sap.com/saphelp_nw04s/helpdata/en/c9/08533b97037963e10000000a114084/frameset.htm
    Link is regarding WAD web item but editing is the same in Report Designer.
    Here you will get information with example query for editing pie charts and what is possible or not.
    like:
    Structure of the Data Provider for a Pie Chart
    In a pie chart, the underlying table has only one row. The values in the columns form the pie segments.
    If the table contains more than one row, the additional rows are ignored when the table is converted into a chart. However, you can define which row is to be used (see below).
    Additional the link describes how to build the query for your requirement.
    Regards
    Andreas

  • Reporting format Issue .. Result  row Count Display...URGENT!!!!

    Hello All,
    Need solution for my issue in reporting,
    This is my Report format
    Date              A/c number   Kf1   Kf2 Kf3
    01.06.07            123         10    20   0
                       234          20    30   30
                       456          50    0  25
                       789           0   25   0
                       Result       80   75  55  
    01.07.07            124         10    0  10
                        134         30   30  30
                        457         40    0   0
                        788         0   25  10
                       Result       80   55  50
    Now my requirement is to display Count in the result row as
    Date             A/c number    Kf1  Kf2 Kf3
    01.06.07        123            10   20   0
                    234            20   30  30
                    456            50    0  25
                    789             0   25   0
                    Result          3    3   2  
    01.07.07        124            10    0  10
                    134            30   30  30
                    457            40    0   0
                    788             0   25  10
                   Result           3    2   3
    and to be more precise this is my requirement
    Date        Kf1  Kf2 Kf3
    01.06.07     3    3   2
    01.07.07     3    2   3    
    I made key figure Calculate Result as Count <> 0 and Calculate single value as Supress Result for each key Figure and A/c Number No display I got result like this showing all data as blank, however the rows will exist.
    Date          Kf1  Kf2 Kf3
    01.06.07                                                                               
    3    3   2  
    01.07.07                                                                               
    3    2   3
    But I need my result should be like this
    Date        Kf1  Kf2 Kf3
    01.06.07     3    3   2
    01.07.07     3    2   3   
    How can I Acheive this either by work Book Or  by Query ,
    Please help me
    Thanks for all ur support in advance
    Sai.

    Hello Boujema,
    I Created formula variable replacement path  in the same way you mentioned but this is irrespective to KF giving the Characteristic Account Number count...
    Hello All,
    please go through my requirement
    this is my report
    Date        AC no  Kf1 Kf2
    01.06.07     XXX   10  12
                 yyy   15  10
                 zzz    5   0
               result  30  22
    If I remove Ac no from this it gives me a result as summation
    Date        Kf1 Kf2
    01.06.07    30  22
    In the same way the KF should give me count of the accounts
    Date        Kf1 Kf2
    01.06.07    3    2
    But I am getting now as If I mention Count<> 0 in KF properties
    Date        Kf1 Kf2
    01.06.07     1    1
    If I place Account Number in report which I dont want to Then i will get count
    Date        AC no  Kf1 Kf2
    01.06.07     XXX   10  12
                 yyy   15  10
                 zzz    5   0
                Result  3   2
    Hope you understand my requirement and come up with any solution.
    Thanks for your help,
    Sai.

  • How to sum the  result rows at query designer

    Hi,
    We want to sum  the result rows which are at the end of the row by the help of query designer?So ,we directly see at analyzer
    exp:
       ..A.jan...A.feb...B.may...B.jun...SumA...SumB....SumA+B
    X..1............9..........6..............7........10.........13..........?????
    Edited by: zarata on Oct 23, 2011 12:49 PM
    Edited by: zarata on Oct 23, 2011 1:07 PM

    Hi,
    Could you please provide some more information.
    if you have characteristics iobject whose values are (A, B etc) and calendar month in rows and then at column level you have key figures then if you have turn on the "Display Result Rows" property of both iobject in Bex  as "Always" you can get the result. At the same time you can set "Display Overall result" property of the Query to get overall result.
    Regards,
    Pravin

Maybe you are looking for