Report does not refresh with SAP_BW_URL CMD='PROCESS_VARIABLES' ...

Hello.
We have web templates with custom button to change the selection criteria. Our HTML code has the following code:
<input type=button name="refreshbutton" value="Refresh" onClick="RefreshView();">
and
function RefreshView(){
url="<SAP_BW_URL CMD='PROCESS_VARIABLES' SUBCMD='VARIABLE_SCREEN'>";
SAPBWOpenURL(url);
When I execute the report for the first time with some selections, I get the correct result. Then I click on the button and get the selection screen where I change the values and click to execute the report with these new values. HOWEVER, the result is not updated, the table still holds the values from the first run BUT the values in the Selection Block show the newly entered values. Does anybody know what the problem might be?
Thanks to all in advance.
Irina

Hi Irina,
Instead of the "Process_Variables" command & "Variable_Screen" subcommand try just calling the same web template again with this:
CMD=LDOC&TEMPLATE_ID=yourTemplate&VARIABLE_SCREEN=X

Similar Messages

Report does not refresh when link to page

I have a report on page 1 with a column link to a report on page 2.
The link sets items on page 2.
If I use the 'Page in this Application' from the column link, the items on page 2 are set and the report is automatically refreshed.
If I use the 'URL' in the column link, the items are set but the report on page 2 is not refreshed. I have more than 3 items to pass via the link so I have to use the URL. The url syntax is correct - if I click a Go button on page 2 the data refreshes fine.
I have the same problem when clicking a tab that I have set to clear the page items - the tab clears the cache on the target page but the data in the report is not refreshed until I click the go button.
The items on page 2 are select lists and text (always submit when enter pressed).
How can I get the report on page 2 to auto refresh without the user having to click the Go button?
Message was edited by: kgamble
kgamble

I can't post the pages (site reasons) but here's the debug.
All the item values are set correctly to what I want but at point 041 - I get the custom "no rows returned error". If I click the refresh button (essentially a submit with go) the date appears.
I am now using the link set up to go to 'Page in Application' with clear cache and 3 item variables set and reset pagination ticked and the request of Go (its the same result without the request and the pagination unticked).
Any ideas?
Thanks
Kathryn
0.00:
0.00: S H O W: application="129" page="8" workspace="" request="Go" session="8392008407576157812"
0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-gb
0.02: alter session set nls_language="ENGLISH"
0.02: alter session set nls_territory="UNITED KINGDOM"
0.02: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to dbtimezone
0.02: NLS: Language=en-gb
0.02: Application 129, Authentication: CUSTOM2, Page Template: 3508132500492586
0.03: ...Supplied session ID can be used
0.03: ...Application session: 8392008407576157812, user=PENTESTER
0.03: ...Determine if user "KGAMBLE" workspace "1728921676563485" can develop application "129" in workspace "1728921676563485"
0.03: Session: Fetch session header information
0.03: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.05: ...Session State: Save "P8_IDR" - saving same value: "Y"
0.05: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.05: ...Session State: Save "P8_STATUS" - saving same value: "Outstanding"
0.05: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.05: ...Session State: Save "P8_SECTION" - saving same value: "P"
0.05: ...Metadata: Fetch page attributes for application 129, page 8
0.05: Fetch session state from database
0.05: Branch point: BEFORE_HEADER
0.05: Fetch application meta data
0.05: Authorization Check: "4732024931692101" User: "PENTESTER" Component: "PAGE"
0.06: Clear cache: request=RP
0.06: ...Resetting pagination for page
0.06: Clear cache: request=8
0.06: ...Clearing Cache for Page 8
0.06: Nulling cache for application "129" page: 8
0.08: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.08: ...Session State: Saved Item "P8_IDR" New Value="Y"
0.08: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.08: ...Session State: Saved Item "P8_STATUS" New Value="Outstanding"
0.08: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.08: ...Session State: Saved Item "P8_SECTION" New Value="P"
0.08: Computation point: BEFORE_HEADER
0.08: Processing point: BEFORE_HEADER
0.09: Show page template header
0.09: Computation point: AFTER_HEADER
0.09: Processing point: AFTER_HEADER
0.11: Authorization Check: "4732329087693375" User: "PENTESTER" Component: "parenttab"
0.13: Authorization Check: "6131220670151932" User: "PENTESTER" Component: "parenttab"
Home New Complaint
Existing Data
Logout |
Complaints Complainants
0.14: Region: Complainant Search
Complainant Search
0.14: Item: P8_SD_SEARCH TEXT_WITH_ENTER_SUBMIT
SD Number
0.16: Item: P8_SURNAME COMBOBOX Complainant -- All -- ARDVARK ARMSTRONG BAKER BLOGGS CHICKEN HARPER HILL JONES PERRY REAPER ROBINSON SHERMAN SMITH T WATSON
0.16: Item: P8_NI_SEARCH TEXT_WITH_ENTER_SUBMIT
NI Number
0.16: Region: criteria_go
0.16: Item: P8_GO BUTTON
0.17: Item: P8_ROWS COMBOBOX Number of complaints per page 10 15 20 30 50 100 200 500 1000 5000
0.17: Region: Complaint Search
Complaint Search
The list of complaints must match ALL of these specified search criteria:
0.19: Item: P8_START PICK_DATE_DD_MON_YYYY
Start
0.19: Item: P8_END PICK_DATE_DD_MON_YYYY
End
0.20: Authorization Check: "4733005669696056" User: "PENTESTER" Component: ""
0.20: Item: P8_TARGET COMBOBOX
Target -- All -- Acknowledgement In Target Acknowledgement Target not Met Acknowledgement Pending Final Response In Target Final Response Target not Met Final Response Pending
0.22: Item: P8_RECUR COMBOBOX
Recurrent? -- All -- YES NO
0.22: Item: P8_PAY_E COMBOBOX Ex Gratia/Interest
Payments -- Select -- YES NO
0.23: Item: P8_IDR COMBOBOX
Type of Complaint -- All -- IDR Other Complaint
0.23: Item: P8_STATUS COMBOBOX Status -- All -- Outstanding Completed 01-Jan-2007 05-Feb-2007 05-Mar-2007 12-Feb-2007 12-Mar-2007 15-Jan-2007 22-Jan-2007 26-Feb-2007 29-Jan-2007
0.23: Computation point: BEFORE_BOX_BODY
0.23: Processing point: BEFORE_BOX_BODY
0.25: Region: Complaints List
Complaints List
0.25: show report
0.28: Authorization Check: "4733005669696056" User: "PENTESTER" Component: "COLUMN"
0.28: determine column headings
0.28: activate sort
0.38: parse query as: GENERAL1
0.38: binding: ":P8_NI_SEARCH"="P8_NI_SEARCH" value=""
0.39: binding: ":P8_SD_SEARCH"="P8_SD_SEARCH" value=""
0.39: binding: ":P8_SURNAME"="P8_SURNAME" value="AA"
0.39: binding: ":P8_START"="P8_START" value=""
0.39: binding: ":P8_END"="P8_END" value=""
0.39: binding: ":P8_SECTION"="P8_SECTION" value="P"
0.39: binding: ":P8_STATUS"="P8_STATUS" value="Outstanding"
0.39: binding: ":P8_TARGET"="P8_TARGET" value=""
0.39: binding: ":P8_IDR"="P8_IDR" value="Y"
0.39: binding: ":P8_RECUR"="P8_RECUR" value="AA"
0.39: binding: ":P8_PAY_E"="P8_PAY_E" value="X"
0.41: print column headings
0.41: rows loop: 15 row(s)
There are no complaints matching the criteria. Please double check all the criteria in the boxes above.
0.42: Computation point: AFTER_BOX_BODY
0.42: Processing point: AFTER_BOX_BODY

CRVS2010 Beta - Crystal Report does not work with VS 2010

After having installed vs 2010, as mentioned, I dowloaded crsytal report . But when trying to create a new crystal report object, I have a html page displayed but crystal report does not start. I would like to know how to make crystal report start to create new report ?
Thanks
Patrick
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Thread moved to NET Development - Crystal Reports
Edited by: Ludek Uher on Aug 27, 2010 6:48 AM

My OS is windows XP. Visual studio 2010 Professional version 10.0.30319.1.rtm rel. Visual basic is 01018-532-2002102-70383. dot net framework is 4.0.30319 rtm rel. When I add a new crystal report object to my project a file named CrystalReport1.mht. Its content is :
From: <Saved by Windows Internet Explorer 8>
Subject: Crystal Reports for Visual Studio 2010
Date: Fri, 2 Oct 2009 17:24:34 -0700
MIME-Version: 1.0
Content-Type: multipart/related;
     type="text/html";
     boundary="----=_NextPart_000_0000_01CA4385.35B07AB0"
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
This is a multi-part message in MIME format.
=_NextPart_000_0000_01CA4385.35B07AB0
Content-Type: text/html;
     charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Content-Location: file://C:\_Working\Projects\Cortez\Stub Templates\RTM\EN\CR for VS 2010 HTML\CRforVS2010.html
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
then followed by characters whch are not readable.
Thank you for your help
Patrick

Multiple Select List does not Refresh with Dynamic Action

All,
Scenario:
Using APEX 4.2.2, I have a Select List page item (P4_SPONSOR) set to allow multiple values which has a dynamic LOV to populate the list. What I would like to do is highlight the display values based on another page item's value (P4_DRIVER_ID). When I set the source of P4_SPONSOR to static text, such as a delimited string of 1:2:3:4, any display values where the return values are equal to the static text are highlighted when the page loads.
Problem:
The problem lies in trying to use a query as a source for P4_SPONSOR which is filtered based on the other page item, P4_DRIVER_ID. For instance, my SQL Query (returning colon separated values) returns the same as the static text noted above. In the query's WHERE clause, I specify that the driver's ID is equal to P4_DRIVER_ID:
SELECT sponsor_id
FROM sponsors_drivers_xref
WHERE driver_id = :P4_DRIVER_ID;
This, as I understand it, would necessitate a refresh of P4_SPONSOR whenever the value of P4_DRIVER_ID changes. So, I have a Dynamic Action that does just that. When executed on the page, I can see the P4_SPONSOR multiple select list actually refresh, but none of the display values become highlighted.
Thoughts?
Thanks,
-Seth.

Seth,
A dynamic action refresh of your select list will refresh the list of values (this is what you are seeing), it will not refresh the value of the item itself. In fact, it will remove any values that you had already selected. To refresh the value you will need to add additional dynamic actions.
Create another dynamic action with:
Event: After Refresh
Selection Type: Item(s)
Item(s): P4_SPONSOR
If this was a normal select list you could just create a Set Value action and use your query to set the value of the select list. Since this is a multiple select list your will need to get your colon delimited value first and then use some javascript to set the values of your select list.
Create an hidden page item name P4_SPONSOR_TEMP.
Add a true action to your new dynamic action:
Action: Set Value
Set Type: SQL Statement
SQL Statement:
SELECT sponsor_id
FROM sponsors_drivers_xref
WHERE driver_id = :P4_DRIVER_ID;
Page Items to Submit: P4_DRIVER_ID
Selection Type: Item(s)
Item(s): P4_SPONSOR_TEMP
Add another true action to your new dynamic action:
Action: Set Value
Set Type: JavaScript Expression
JavaScript Expression:
$("#P4_SPONSOR_TEMP").val().split(":")
Selection Type: Item(s)
Item(s): P4_SPONSOR
--Jeff

AR Aging Report does not change with Posting, Due, and Document selections

It appears to me that when you run the AR Aging report with the same date ranges in each of the date selection fields, Posting, Due and Doument, you do not get a different display of aging buckets. Does this report always display data based on Due Date?

Hi Bill,
When you run the AR Aging report change "Age by" option and check aging buckets are changing or not it has to change.
Thanks,
Sachin

Investment order reporting does not match with AM

Hello,
We are exectuing two reports 1) internal order report( for investment order) and asset history sheet.
Both the report figures should match. but due to some reason the internal order report shows less value than asset history sheet.
What can be the possible reason for the differences.
BR,
Zulfikar

Hi
Check whether the sales order creation date and actually when you created the delivery ? if say u created the sales order yesterday with yesterday date as delivery date and carried out delivery process to day means. The delivery date in the delivery process will be today date in that case delivery date wont match with sales order. This is one case like that so many cases are there.
Material might not be confirmed etc....
Regards,
Mullai

Report 2KEE does not reconcile with report KE5Z

Hi,
Ran report 2KEE for period 1. Now I drill down in this report to see the details. The summary in report does not reconcile with sum of it's details. Report details reconcile with KE5Z for the same period and account.
Kindly explain why 2kee summary for an account does not reconcile with it's drill down details.

Report 2KEE takes data from table GLPCT & Report KE5Z from table GLPCA

WebI XI 3.1 Report does not fresh in IE6 but it does in IE7

Short Text
WebI Report Does Not Refresh in IE6
Long Text
BO XI 3.1 Windows Server 2003 x64, XP Desk tops with a mixture of IE6
and IE 7.
We have a universe with managed access rights enables at the group
level. The groups we have are: Batu, AUS, and Admin. When someone logs
in as TEST_USER_BATU (user is in the Batu group) the report does not
refresh. The LOVs can be refresh but the report comes back blank. When
we repeat the same work flow in IE7 the report comes back with data.
We have repeated this test on several computers including the servers
running IE6.
Steps for Reconstruction
1)Create Universe with managed access restrictions
2)Restrict groups at the row level including LOVs (see below example)
2.a) Batu Group
2.b) AUS Group
2.c) Admin Group
3) Create restrictions for the Batu and AUS group only.
4)Create generic WebI report applicable for all groups
5) Run WebI Report using a different account for each account in
different group.
6) You will find that the users in the restricted groups can not
refresh the report but the user in the admin group can run the report

Hi all,
Thanks for your responses but nothing seems to be working.
@Mark, Sahil: The properties of the field is set as type "DATE" in the universe.
@Manpreet: Not feasible with timestamp data.
@Anuj: I tried your solution. But it does not work. Its really weird. The date part of the string gets sorted but the time part does not. I have tried splitting the data into date and time into 2 seperate variables and then sorting them, but still the time does not get sorted. The time is also converted to 24 hour format. I have also tried removing the blanks in the data between date and time and converting the same to number. No effect.
Any other ideas?
Kind regards,
Minuj

Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

I just noticed today that any Graph or PDF report I try to view I get the
following error - Error from reports from ZAM - File does not begin with
'%PDF-'. I tried to just save the file and then open it, but get the same
error. I can open other pdf files I have downloaded from other sites ok.
Anyone have any idea? I haven't done anything to that server that I am
aware of in quite a while.
Thanks
Bill

I took a closer look at the files it downloaded, opened them with notepad,
haer is what it says:
XSL Transform or subsequent processing failedThe document has no pages.
"Bill" <[email protected]> wrote in message
news:2bBtk.2164$[email protected]..
>I just noticed today that any Graph or PDF report I try to view I get the
>following error - Error from reports from ZAM - File does not begin with
>'%PDF-'. I tried to just save the file and then open it, but get the same
>error. I can open other pdf files I have downloaded from other sites ok.
>Anyone have any idea? I haven't done anything to that server that I am
>aware of in quite a while.
>
> Thanks
>
> Bill
>

Error : (does not begin with '%PDF-'. ) when print report in pdf

Hi all,
http://www.oracle.com/technology/obe/apex/apex31nf/apex31rpt.htm
using the example in the above link,
I have created a report and tried to print in pdf format,
But
does not begin with '%PDF-'. this error is appearing when the adobe reader is opening.
Could anyone help me to make out the reason for this error?
bye
srikavi

Srikavi,
Which rendering engine are you using? BI Publisher? Apache FOP? Did you follow the steps outlined here when you configured PDF printing:
http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
Regards,
Marc

The report MC+E does not match with F.01

Dear Friends,
The report MC+E does not match with F.01 and moreover it does not indicate the domestic sales.It only captures export sales.
Will you please tell me why it is happenning?
Thank you.
Sadanand.

Mohammed, are you able to create a brand new report using this same database source.
If that works then you know you have the proper drivers for the ODBC connection. Another
way to test this is to use Excel, create a database connection in Excel, to the ODBC table,
and see if you can pull data. You may need to update your ODBC drivers. If you are able
to pull data in your new report, try adding the other database to it, and see if the error returns.
I am on CR XI, so, I can't be much more help.

PDF output does not refresh data in BI Publisher, XML and HTML do refresh

I just upgraded to BI Publisher 10.1.3.4.0 and I noticed that the PDF format of the reports does not reflect recent changes in data, while XML data and HTML output do reflect changes in data immediately.
I'm using BI Publisher to print APEX applications reports. When I change some data in APEX forms, I click again in the Print button and the data remains unchanged. I made some testing inside Oracle BI Publisher, and noticed that XML data and HTML output do reflect changes, but PDF output remains with the old data for some unknown amount of time. I cannot identify a method to force the PDF to refresh, just un-log and log in again several times until the data appears updated. This is serious because when users change data and print again, they expect the changes to be reflected in the new printable report, and may not notice that the data is the old version.
OS is Oracle Enterprise Linux.
Any help on this will be very welcome.
Francisco

Open the report in Edit Mode Click on the reports and in the properties section Uncheck the
Enable Document Cache Property and your issue should be resolved.

Cascading LOVs (APEX 4.1) problem, using in report does not set values

Hi,
i am using APEX 4.1.0.00.32 and i have a simple report as
SQL:*
SELECT * from region
WHERE region like '%'||P3_REGION||'%'
and country like '%'||P3_COUNTRY||'%'
and city like '%'||P3_CITY||'%'
Items:*
P3_REGION:
select distinct region as d, region as r from region
Display Null value: YES
Null display value: - select -
Null return value: +0+
P3_COUNTRY:
select distinct country as d, country as r from region where region = :P3_REGION
Display Null value: YES
Null display value: - select -
Null return value: +0+
Cascading LOV Parent Item(s): P3_REGION
P3_CITY:
+select distinct city as d, city as r from region where country = :P3_COUNTRY
Display Null value: YES
Null display value: - select -
Null return value: +0+
Cascading LOV Parent Item(s): P3_COUNTRY
The LOVs work fine and the correct values are displayed if cascading through them
So in the last step i want to filter the report with the values that were selected in the lovs. And this i get not working.
I tried to add a button with SUBMIT of the page. After choosing values in all LOVs and clicking the SUBMIT button the page submits, alle LOVs are cleared (with value - select -) and the report shows all rows.
I tried to change the button to "redirect to Page 3" and setting the values P3_REGION, P3_COUNTRY, P3_CITY to &P3_REGION., &P3_COUNTRY., &P3_CITY. but without success.
I tried to use the setting "Page Action when Value Changed" to "Submit" and/or "Redirect and set value" for all Item LOVs and/or only the last item LOV, but then the cascade of the LOVs does not work properly and the report does not change too.
I am confused as i don´t know what i can do until now. I think this should be an easy requirement to limit/filter the report with values in the LOVs.
Furthermore it should be possible to choose only the region LOV and then limit the report with that region (without choosing country and city)
Thanks in advance!

Hi Dan,
thank you for your answer. I have the solution now from Kleber_M, this works.
Dan McGhan wrote:
1. Use bind variables in my query. It would look something like:
SELECT *
FROM region
WHERE region LIKE '%'|| :P3_REGION ||'%'
AND country LIKE '%'|| :P3_COUNTRY ||'%'
AND city LIKE '%'|| :P3_CITY ||'%'
This was only a mistake when writing the post, i forgot the colon. I use bind variables of course.
2. Make sure you have a comma separated list of item names that the report depends on beneath the SQL Query where it says Page Items to Submit. This will make sure that the value of those items on the page are bound into session state prior to the query executing.I tried this, too, but without success...
3. Use Dynamic Actions to perform the refresh action when any of the three items changes. This would be both more performant and a better experience for the end user than a full page refresh.How can i do this. This sounds good, because when refreshing the page often some items oder actions are done that i don´t want to.
Regards,
Matze

Advanced Table does not refresh after database level action

Hi,
I have a page which has an advanced table. I update the advanced table from the page do some validations, update some DB level columns(also part of advanced table) and see that the changes are saved to the DB but the advanced table does not show the updates done at the DB level.
I tried clearing the VO Cache and re-executing the VO but still it does not refresh the Advanced table data.
This is very critical requirement for the client, any inputs will be greatly appreciated.
Thanks a lot in Advance.
Here is the code snippet from my CO's processRequest:
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAAdvancedTableBean tblbean = (OAAdvancedTableBean)webBean.findChildRecursive("recasttable");
if(tblbean!=null)
tblbean.setRendered(true);
OAApplicationModule tblam = (OAApplicationModule)am.findApplicationModule("RecastLineAM1");
tblam.invokeMethod("initQuery");
tblbean.getTableData();
Here is my AM - initQuery() code:
public void initQuery()
//clearVOCaches("RecastLineEO",true);
clearVOCaches(null,true);
getRecastLineVO1().init();
Here is the VO - init() code:
public void init()
System.out.println("****************************executing...");
OADBTransaction tx = (OADBTransaction) getApplicationModule().getTransaction();
if (tx.getTransientValue("RECAST_ID") !=null)
Number recastId = (Number) tx.getTransientValue("RECAST_ID");
System.out.println("recastId: "+ recastId);
setWhereClause("RECAST_HDR_ID = :1");
setWhereClauseParams(null); // Always reset
setWhereClauseParam(0, recastId);
executeQuery();
}

hi,
This is how I am calling a DB package. the package does updates on the table. once done I am issueing a commit and requerying the data, however the vo is not getting refreshed.... Can someone point out what am I missing... why is the VO not getting refreshed....
This is very critical...
Thanks
Srini
public void validateRecast(String respKey)
OADBTransaction tx = (OADBTransaction)getApplicationModule().getTransaction();
Number recastId = (Number) tx.getTransientValue("RECAST_ID");
System.out.println("*********************validateRecast().RecastId: " + recastId);
OracleCallableStatement ocs = null;
Connection conn = tx.getJdbcConnection();
String strOut="", strErr="";
Number respId = null;
try
respId = new Number(respKey);
catch(Exception e)
throw new OAException("Invalid Responsibility");
String stmt = "BEGIN " +
"GE_RECAST_UTILS_PKG.validate_recast(:1,:2,:3,:4); " +
"END;";
try
ocs = (OracleCallableStatement)conn.prepareCall(stmt);
ocs.setNUMBER(1,recastId);
ocs.setNUMBER(2,respId);
ocs.registerOutParameter(3,OracleTypes.VARCHAR);
ocs.registerOutParameter(4,OracleTypes.VARCHAR);
ocs.execute();
strOut = ocs.getString(3);
strErr = ocs.getString(4);
ocs.close();
System.out.println("Returned with: " + strOut);
if(strOut.equalsIgnoreCase("ERROR"))
//throw new OAException(strErr);
tx.putTransientValue("ERROR",strErr);
tx.commit();
getApplicationModule().clearVOCaches("RecastLineEO",true);
RecastLineVOImpl lineVo = (RecastLineVOImpl)getApplicationModule().findViewObject("RecastLineVO1");
lineVo.init();
System.out.println("===============RecastLnId: " +lineVo.first().getAttribute("RecastLnId"));
System.out.println("===============Product Line: " +lineVo.first().getAttribute("ProductLine"));
catch(SQLException e)
tx.rollback();
if(ocs!=null)
try
ocs.close();
}catch(SQLException e1)
throw OAException.wrapperException(e1);
throw OAException.wrapperException(e);
}

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

Report does not refresh with SAP_BW_URL CMD='PROCESS_VARIABLES' ...

Similar Messages

Maybe you are looking for