Report from Grid Control:Monthly Growth of each database in Single Report
Hi,I want to make the report from Grid Control for Monthly Growth of each Database for Capacity planning
I can See under Report->Storage->Oracle Database Tablespace Monthly Space Usage
But this is only for once database and I want to include all the database in single report that too with limited INfo
Want the format something like..just wanted to make you guys
Database Actual Size on 1st Actual Size on 30th INcrease in Size
1.
2.
Something close to above format will do...
Thanx
Gagan
Hi Thanx for the reply
But Which Tablespace Metric You are talking about?I can See 5-6 Tablespace Metric and infact I dont want the data at the tablespace level and I want the total size of the database and growth in last month as shown in ' Oracle Database Tablespace Monthly Space Usage '.
But Thanx again for the reply
Regards
Gagan
Similar Messages
-
Report from Grid Control:Monthly Growth of Each Database on Single Report
Hi,I want to make the report from Grid Control for Monthly Growth of each Database for Capacity planning
I can See under Report->Storage->Oracle Database Tablespace Monthly Space Usage
But this is only for once database and I want to include all the database in single report that too with limited INfo
Want the format something like..just wanted to make you guys
Database Actual Size on 1st Actual Size on 30th INcrease in Size
1.
2.
Something close to above format will do...
Thanx
GaganHi Thanx for the reply
But Which Tablespace Metric You are talking about?I can See 5-6 Tablespace Metric and infact I dont want the data at the tablespace level and I want the total size of the database and growth in last month as shown in ' Oracle Database Tablespace Monthly Space Usage '.
But Thanx again for the reply
Regards
Gagan -
Creation of reports from Grid control 12c
Hi All,
I wish to create some reports from Grid Control and push to mail especially looking for Daily Health Check report like Tablespace,Locks,Alertlog file errors,File systems,Archivelog files sync information in to one report.
Thanks in advance.The native reporting application i.e. Information Publisher does not support such a feature, but in you are using BI Publisher integrated with EM, then BIP allows you to control when to email reports. for example, on completion, on failure, etc ..
-
Statistics report from Grid Control
Hi All,
How to generate a report from Oracle 10.2.0.5 Grid Control with the details about when the statistics were last collected in all the databases. A mail with these details from all the databases should be sent from Grid Control.
Why is this script not working?
SELECT ui.index_name, ui.last_analyzed, ui.table_name
FROM user_indexes ui
INNER JOIN user_tables ut ON ut.table_name = ui.table_name
WHERE ut.temporary = 'N'
Please help.
Thanks,
Dan906051 wrote:
Hi All,
How to generate a report from Oracle 10.2.0.5 Grid Control with the details about when the statistics were last collected in all the databases. A mail with these details from all the databases should be sent from Grid Control.
Why is this script not working?
SELECT ui.index_name, ui.last_analyzed, ui.table_name
FROM user_indexes ui
INNER JOIN user_tables ut ON ut.table_name = ui.table_name
WHERE ut.temporary = 'N'
Please help.
Thanks,
Danwhat does "not work" mean?
1 SELECT ui.index_name, ui.last_analyzed, ui.table_name
2 FROM user_indexes ui
3 INNER JOIN user_tables ut ON ut.table_name = ui.table_name
4* WHERE ut.temporary = 'N'
21:24:48 SQL> /
INDEX_NAME LAST_ANALYZED TABLE_NAME
TEST_DEPARTMENT_PK 2011-06-23 18:23:46 TEST_DEPARTMENT
SYS_IL0000420684C00001$$ TEST
SYS_C0046851 2011-09-15 22:00:45 TB_DELETE
SYS_C0046852 2011-09-15 22:00:46 TB_CHILD
XPKTAB2 2011-08-26 22:00:31 TAB2
XPKTAB1 2011-08-26 22:00:31 TAB1
SYS_C0031937 2011-06-23 18:23:45 SURVEYS
SYS_C0031903 2011-06-23 18:23:44 SUPPLIERS
SYS_C0045632 2011-07-26 22:00:29 SHELTER
SYS_C0031943 2011-06-23 18:23:44 SCHEDULE
ROOM_CON 2011-06-23 18:23:43 ROOM
INDEX_NAME LAST_ANALYZED TABLE_NAME
SYS_C0031904 2011-06-23 18:23:43 RATING
SYS_C0031922 2011-06-23 18:23:43 PROGRAM
PK_PRID 2011-06-23 18:23:42 PRODUCTS
SYS_C0048548 2011-12-15 22:00:29 PATIENT
SYS_C0031907 2011-06-23 18:23:42 PACKAGE
SYS_C0048255 2011-12-04 15:05:04 P
SYS_IL0000284470C00003$$ LONG_CLOB
SYS_C0048549 2011-12-15 22:00:29 ITEMS_USED
SYS_C0048547 2011-12-15 22:00:29 ITEM
SYS_IL0000337403C00008$$ IDB_IMAGE_MNU_TEMP
HOTEL_CON 2011-06-23 18:23:40 HOTEL
INDEX_NAME LAST_ANALYZED TABLE_NAME
GUEST_CON 2011-06-23 18:23:40 GUEST
PK_FRIENDS 2011-06-23 18:23:40 FRIENDS
PK_FREG 2011-06-23 18:23:40 FIRMAS
SYS_C0032526 2011-06-23 18:23:40 E_SERVICE
E_EMP_PK 2011-06-23 18:23:40 E_EMP
SYS_C0031948 2011-06-23 18:23:39 EPISODE
SYS_C0031895 2011-06-23 18:23:39 EMPLOYEES
SYS_C0031913 2011-06-23 18:23:38 CUSTOMER
SYS_C0031898 2011-06-23 18:23:37 CHANNEL_TYPES
SYS_C0031918 2011-06-23 18:23:37 CHANNELS
CASE_PK 2011-06-23 18:23:37 CASE_DETAILS
INDEX_NAME LAST_ANALYZED TABLE_NAME
SYS_C0027803 2011-06-23 18:23:37 BRANCH
BOOKING_CON 2011-06-23 18:23:37 BOOKING
SYS_C0031932 2011-06-23 18:23:36 BILLING
SYS_IL0000226980C00002$$ BASELINE_TEST
37 rows selected.
21:24:50 SQL> -
Building reports around grid control database.
As a part of Grid control support activity many times we need spend hours to verify if all the targets have been assigned rules and thresholds so that they can generate alerts well before the trouble occurs.
So i was wondering is there any way by which which can write some script that will scan all the targets and find out which are not assigned to rules.
I am not sure if i can access these information from grid control database.
Can somebody help me in this ? is there any way to find out which rules have been assigned to which target or what is the threshold assigned to a particular targets by writing sql query / using oracle packages ?
Appreciate help in this regard.Here is some sql I use for this purpose..
(I comment out pieces and such to tweak what I am reporting against)
Run this as sysman in your repository db.
select
target_type,
target_name,
metric_column Metric,
metric_name || ' ' || key_value Name,
decode(warning_threshold,' ',null, decode(warning_operator,'Equal To','=','Not Equal','!=','Greater Than','>','Less Than','<',warning_operator) || ' ' || warning_threshold) Warning,
decode(critical_threshold,' ', null, decode(critical_operator,'Equal To','Not Equal','!=','=','Greater Than','>','Less Than','<',critical_operator) || ' ' || critical_threshold) Critical
from mgmt$metric_collection m
--where target_type = 'oracle_emd'
--and metric_column = 'HostInfovszGrowth'
--and warning_threshold != '20'
--where target_type = 'host'
where-- metric_column like 'tnsPing'
-- (warning_threshold != '80' and critical_threshold != '95')
--and
target_type = 'oracle_database'
--and target_type = 'host'
--and
--target_type = 'oracle_listener'
--target_type = 'oracle_emd'
--and metric_column like 'generic%'
--and warning_threshold like '%ORA%'
and target_name like 'QL%'
and metric_column = 'pctUsed'
order by 1,3,2 -
Data Guard configuration for RAC database disappeared from Grid control
Primary Database Environment - Three node cluster
RAC Database 10.2.0.1.0
Linux Red Hat 4.0 2.6.9-22 64bit
ASM 10.2.0.1.0
Management Agent 10.2.0.2.0
Standby Database Environment - one Node database
Oracle Enterprise Edition 10.2.0.1.0 Single standby
Linux Red Hat 4.0 2.6.9-22 64bit
ASM 10.2.0.1.0
Management Agent 10.2.0.2.0
Grid Control 10.2.0.1.0 - Node separate from standby and cluster environments
Oracle 10.1.0.1.0
Grid Control 10.2.0.1.0
Red Hat 4.0 2.6.9-22 32bit
After adding a logical standby database through Grid Control for a RAC database, I noticed sometime later the Data Guard configuration disappeared from Grid Control. Not sure why but it is gone. I did notice that something went wrong with the standby creation but i did not get much feedback from Grid Control. The last thing I did was to view the configuration, see output below.
Initializing
Connected to instance qdcls0427:ELCDV3
Starting alert log monitor...
Updating Data Guard link on database homepage...
Data Protection Settings:
Protection mode : Maximum Performance
Log Transport Mode settings:
ELCDV.qdx.com: ARCH
ELXDV: ARCH
Checking standby redo log files.....OK
Checking Data Guard status
ELCDV.qdx.com : ORA-16809: multiple warnings detected for the database
ELXDV : Creation status unknown
Checking Inconsistent Properties
Checking agent status
ELCDV.qdx.com
qdcls0387.qdx.com ... OK
qdcls0388.qdx.com ... OK
qdcls0427.qdx.com ... OK
ELXDV ... WARNING: No credentials available for target ELXDV
Attempting agent ping ... OK
Switching log file 672.Done
WARNING: Skipping check for applied log on ELXDV : disabled
Processing completed.
Here are the steps followed to add the standby database in Grid Control
Maintenance tab
Setup and Manage Data Guard
Logged in as sys
Add standby database
Create a new logical standby database
Perform a live backup of the primary database
Specify backup directory for staging area
Specify standby database name and Oracle home location
Specify file location staging area on standby node
At the end am presented with a review of the selected options and then the standby database is created
Has any body come across a similar issue?
Thanks,Any resolution on this?
I just created a Logical Standby database and I'm getting the same warning (WARNING: No credentials available for target ...) when I do a 'Verify Configuration' from the Data Guard page.
Everything else seems to be working fine. Logs are being applied, etc.
I can't figure out what credentials its looking for. -
How to delete a management agent from grid control completely?
I have installed oem grid control 10.2.0.4.0 on single host(oemlinux.oracle.com), and I removed agent10g, and reinstall a new management agent into a new location, but when I wanted to add a weblogic server to monitor, I got error as below:
More than one Enterprise Manager Agent was found for the host.oemlinux.oracle.com
I found there were 2 agents in em console, how to delete the old agent from em console,anybody can help me?Click on the All targets tab, delete the agent.
Then confirm that the delete is in fact happening.
Click Setup, Management & Services Repository tab.
Deleted Targets link.
Time Deleted Completed must have a date in there...
If all that fails - do a quick search - I posted the sql you can run against the repository to wipe it clean of an agent :-)
Not too that if you are removing the O/S software - you need to use the runinstaller to remove the Oracle Home from the inventory.
If you don't do this - future auto installs using the agentDownload script of the agent will fail.
.Daryl -
Performance reports using Grid Control
Hello!
Can we create and schedule database performance reports using oracle 10g grid control?
Thanks.Hi
Yeah its possible to generate the performance reports using Grid Control.
Ex:
Oracle Enterprise Manager GRID Server contains built in reports to support Database Administrators to generate sightly reports.
First Thing is to click to "Reports" tab on the top, right hand side of the GRID Management Console (figure_grid_management_console). This page is where all the predefined and custom reports can be find. Now click on the "Create" Button on top of the page to create a new custom report. "Create Report Definition" page comes to the screen. There are four tabs for the definition of the report. -
Can Grid Control 10gR2 create a standby database when primary db uses ASM?
Does anyone know if Grid Control 10gR2 will be able to create a standby database when the primary database uses ASM for data files, redo log files, and archive log files but the standby database will use mounted disks? If it can, would it matter that the primary db will be a RAC cluster and the standby will be a single instance db?
I appreciate your reply and hope you are correct. Have you had a look at the 10gR2 Grid Control to confirm this or are you only going on published statements? The reason I ask is because previous versions of Grid Control claimed to support ASM but they would only allow you to work with them AFTER you had created a standby database manually but you couldn't actually use Grid Control to create a standby database from a primary database that had its log files on ASM disks.
-
Can Grid control 11g monitor Oracle 9i database
Can Grid control 11g monitor Oracle 9i database? This is on Linux5.7
Thanks for the help
s.Yes but Enterprise Manager 11.1 Grid Control requires the 11.1 Agent.
Then go to the Targets tab, then Databases. It should self-discover the 9i database.
Also see Advanced Uses of Oracle Enterprise Manager 11g
http://www.oracle.com/us/products/enterprise-manager/advanced-uses-em11g-wp-170683.pdf
>
Oracle Secure Backup protects not only Oracle Database 9i, 10g and 11g,
Grid Control supplies a common, standard interface to set up and manage Oracle Data Guard for Oracle Database 9i, 10g and 11g databases -
Where in the 12c grid control that it supports 11r2 database. Thanks
Where in the 12c grid control that it supports 11r2 database. Thanks
Yes 11gR2 databases are supported for 12c.
11.2.0.4.0,11.2.0.3.0,11.2.0.2.0,11.2.0.1.0
Going forward you can check the certifications matrix information for OEM by following,
Login into My Oracle Support page > Click on Certifications tab >
Choose [Enterprise Manager Base Platform - OMS] or [Enterprise Manager Base Platform - Agent]
Select the Release [12.1.0.2]
Press Search Button.
Refer the following Enterprise Manager Certification Matrix document:
How to Find Certification Information for Enterprise Manager Grid Control and Enterprise Manager Cloud Control (Note 1402255.1)
Understanding Enterprise Manager Certification (Certify) in My Oracle Support [Note 406906.1]
HTH
Mani -
Daily Report using Grid Control
Hi guys
I would like to know if there is a way to schedule some daily reports under the Grid Control?
There are some cool reports that I wish to receive automatically in my mailbox everyday.
I don't know how to do that.
Thanks
Brahim DRIHEMHi,
It's very simple.
Select your report (with the radio-button) and click Edit.
Go to the schedule tab
Select "Schedule Report"
Select "Repeating" and fill out the details here
select "E-mail report each time the scheduled report completes"
Enter your mail address
Press Ok button.
Hope this helps. -
Using Data Pump from Grid Control to import schema
Hi,
I have 2 10g oracle databases on 2 different windows servers. The databases are called: source and dest.
In dest I have created a database link to source.
I want to import a schema from source to dest.
I log on Grid Control and in the maintenance tab I click the link Import from database.
I choose import from schema and the database link I created earlier.
I then choose the schema name.
In the page Import From Database: Options I expand the advanced options.
I choose Exclude Only Objects Specified Below and I add a row that looks like this:
object type: TABLE
object name expression: EXCLUDE=TABLE:"IN('TEST6', 'TEST7')"
As I submit the job I get this error message:
Import Submit Failed
Errors: ORA-39001: invalid argument value ORA-39071. The value of NAME_EXPR is misformed. ORA-00920: invalid relation operator.
I have tried several ways, but I am still getting the same error.
Any suggestion will be appreciated.Hi,
Thanks for your replay.
I have already tried the following with back slash:
EXCLUDE=TABLE:\"IN('TEST6', 'TEST7')\"
and I get the same error message.
If you have the correct syntax could you send it to me?
Regards. -
Drilldown Report-Drill on month filter target report from Jan-drilled month
Hi All,
As in requirement is to have a chart on parent record which has Month(Close Date Month of oppty) and based on click to navigate to target report showing opptys till the selected month.eg. if user clicked on March then Opptys from Jan - March should show up accod to Close Date.
I am stuck as I make the Month(Close Date) column as prompted in target report it is getting filtered on the only one Month.If i Click on March target report is showing only for March records which is by design ofcourse.
Another Drilldown has to be from a Chart where in Bar chart shows revenue per month.
Any prompts will be really helpful.Got it to work!!!
Using filtering on another analysis. -
Sending alerts from grid control to tivoli tec
Hi Guys
We are working on a requirement where we want to integrate grid control 11g with Tivoli Tec which in turn is connected to our helpdesk ticketing and monitoring system.
Has anyone done this before? Any note, doc will be helpful.
ThankyouHi
First. You must to understatn that each metric had a interval time for each recopilation. Check your database target --> Metrics and Policy issues --> Invalid objects by schema or Total invalid objects count
These metrics have a interval of 24 hours (this is my situation) Check your situation and change the interval. After these you see that the information change in your OMS.
For see the clean button
Open your Grid Control Console
Go to Alerts --> Warning
Select database and press go
You will see that the Clean button appear and checkbox for each warning alert that its possible manual clean you will see the checkbox to activate
The Critical Alerts can't clean manualy. The GC clean the alert when the situation change.
You can see the evolution in the metric values it you select the alert
Maybe you are looking for
-
Spry Collapsible Panel at bottom of page - how to make the browser scrolldown automatically
The question is - i have a collapsible panel at the bottom of my page that I'm using as a footer menu. It is 200px tall. The visitor clicks on "FIND OUT MORE", then the panel opens 200px tall. I want the viewing area of browser to focus on the conten
-
Eschalon_book2 package install: cp: cannot stat error?
Hi All, Trying to install an eschalon2 pkgbuild from the AUR. I already edited the PKGBUILD for the correct source URL and regenerated the correct MD5's, I'm stuck at the below error though, some help would be much appreciated! Please see my terminal
-
Missing All Saved Information After Shutdown
I've had my macbook pro for about a week. I shut it down this morning and when I turned it back on all my saved information was missing. Including my aperature pictures, itunes, bookmarks, desktop wallpaper, and all program settings. Its like I was o
-
Target moviclip in main timline
I got to moviclips on the timeline (m1_mc, m2_mc), From the timeline of m1_mc I try to rotate moviclip m2_mc. The script given below. But it result in this error : 1119: Access of possibly undefined property m2_mc through a reference with static type
-
How do you install a firewall on the Galaxy S3?
The phone will connect to the Internet via WiFi in open environments (Starbucks, Panera's, nearly every store). This requires a firewall for security. How do you install a firewall within the constraints of the warranty?