Creation of reports from Grid control 12c
Hi All,
I wish to create some reports from Grid Control and push to mail especially looking for Daily Health Check report like Tablespace,Locks,Alertlog file errors,File systems,Archivelog files sync information in to one report.
Thanks in advance.
The native reporting application i.e. Information Publisher does not support such a feature, but in you are using BI Publisher integrated with EM, then BIP allows you to control when to email reports. for example, on completion, on failure, etc ..
Similar Messages
-
Report from Grid Control:Monthly Growth of each database in Single Report
Hi,I want to make the report from Grid Control for Monthly Growth of each Database for Capacity planning
I can See under Report->Storage->Oracle Database Tablespace Monthly Space Usage
But this is only for once database and I want to include all the database in single report that too with limited INfo
Want the format something like..just wanted to make you guys
Database Actual Size on 1st Actual Size on 30th INcrease in Size
1.
2.
Something close to above format will do...
Thanx
GaganHi Thanx for the reply
But Which Tablespace Metric You are talking about?I can See 5-6 Tablespace Metric and infact I dont want the data at the tablespace level and I want the total size of the database and growth in last month as shown in ' Oracle Database Tablespace Monthly Space Usage '.
But Thanx again for the reply
Regards
Gagan -
Report from Grid Control:Monthly Growth of Each Database on Single Report
Hi,I want to make the report from Grid Control for Monthly Growth of each Database for Capacity planning
I can See under Report->Storage->Oracle Database Tablespace Monthly Space Usage
But this is only for once database and I want to include all the database in single report that too with limited INfo
Want the format something like..just wanted to make you guys
Database Actual Size on 1st Actual Size on 30th INcrease in Size
1.
2.
Something close to above format will do...
Thanx
GaganHi Thanx for the reply
But Which Tablespace Metric You are talking about?I can See 5-6 Tablespace Metric and infact I dont want the data at the tablespace level and I want the total size of the database and growth in last month as shown in ' Oracle Database Tablespace Monthly Space Usage '.
But Thanx again for the reply
Regards
Gagan -
Statistics report from Grid Control
Hi All,
How to generate a report from Oracle 10.2.0.5 Grid Control with the details about when the statistics were last collected in all the databases. A mail with these details from all the databases should be sent from Grid Control.
Why is this script not working?
SELECT ui.index_name, ui.last_analyzed, ui.table_name
FROM user_indexes ui
INNER JOIN user_tables ut ON ut.table_name = ui.table_name
WHERE ut.temporary = 'N'
Please help.
Thanks,
Dan906051 wrote:
Hi All,
How to generate a report from Oracle 10.2.0.5 Grid Control with the details about when the statistics were last collected in all the databases. A mail with these details from all the databases should be sent from Grid Control.
Why is this script not working?
SELECT ui.index_name, ui.last_analyzed, ui.table_name
FROM user_indexes ui
INNER JOIN user_tables ut ON ut.table_name = ui.table_name
WHERE ut.temporary = 'N'
Please help.
Thanks,
Danwhat does "not work" mean?
1 SELECT ui.index_name, ui.last_analyzed, ui.table_name
2 FROM user_indexes ui
3 INNER JOIN user_tables ut ON ut.table_name = ui.table_name
4* WHERE ut.temporary = 'N'
21:24:48 SQL> /
INDEX_NAME LAST_ANALYZED TABLE_NAME
TEST_DEPARTMENT_PK 2011-06-23 18:23:46 TEST_DEPARTMENT
SYS_IL0000420684C00001$$ TEST
SYS_C0046851 2011-09-15 22:00:45 TB_DELETE
SYS_C0046852 2011-09-15 22:00:46 TB_CHILD
XPKTAB2 2011-08-26 22:00:31 TAB2
XPKTAB1 2011-08-26 22:00:31 TAB1
SYS_C0031937 2011-06-23 18:23:45 SURVEYS
SYS_C0031903 2011-06-23 18:23:44 SUPPLIERS
SYS_C0045632 2011-07-26 22:00:29 SHELTER
SYS_C0031943 2011-06-23 18:23:44 SCHEDULE
ROOM_CON 2011-06-23 18:23:43 ROOM
INDEX_NAME LAST_ANALYZED TABLE_NAME
SYS_C0031904 2011-06-23 18:23:43 RATING
SYS_C0031922 2011-06-23 18:23:43 PROGRAM
PK_PRID 2011-06-23 18:23:42 PRODUCTS
SYS_C0048548 2011-12-15 22:00:29 PATIENT
SYS_C0031907 2011-06-23 18:23:42 PACKAGE
SYS_C0048255 2011-12-04 15:05:04 P
SYS_IL0000284470C00003$$ LONG_CLOB
SYS_C0048549 2011-12-15 22:00:29 ITEMS_USED
SYS_C0048547 2011-12-15 22:00:29 ITEM
SYS_IL0000337403C00008$$ IDB_IMAGE_MNU_TEMP
HOTEL_CON 2011-06-23 18:23:40 HOTEL
INDEX_NAME LAST_ANALYZED TABLE_NAME
GUEST_CON 2011-06-23 18:23:40 GUEST
PK_FRIENDS 2011-06-23 18:23:40 FRIENDS
PK_FREG 2011-06-23 18:23:40 FIRMAS
SYS_C0032526 2011-06-23 18:23:40 E_SERVICE
E_EMP_PK 2011-06-23 18:23:40 E_EMP
SYS_C0031948 2011-06-23 18:23:39 EPISODE
SYS_C0031895 2011-06-23 18:23:39 EMPLOYEES
SYS_C0031913 2011-06-23 18:23:38 CUSTOMER
SYS_C0031898 2011-06-23 18:23:37 CHANNEL_TYPES
SYS_C0031918 2011-06-23 18:23:37 CHANNELS
CASE_PK 2011-06-23 18:23:37 CASE_DETAILS
INDEX_NAME LAST_ANALYZED TABLE_NAME
SYS_C0027803 2011-06-23 18:23:37 BRANCH
BOOKING_CON 2011-06-23 18:23:37 BOOKING
SYS_C0031932 2011-06-23 18:23:36 BILLING
SYS_IL0000226980C00002$$ BASELINE_TEST
37 rows selected.
21:24:50 SQL> -
Hi all,
OS: OEL 6.3 64 bits
DB: 11.2.0.3
Grid: 12.1
While installing Grid Control 12c, the following error appears to me:
INFO: SaveInvWCCE JRE files in Scratch
INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch
INFO: no env vars set, no envVars.properties file is generated
INFO: none of the components are configurable
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = /gridControl/WLS/jdk16/install/chainedInstall/globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Install Finished at: 2013-07-04_11-12-49-PM
INFO: The ARU ID found in shiphomeproperties.xml file is 226
INFO: ARUId present in shiphomeproperties.xml matches with the 64 bit OMS Platforms ARU ID 226, so -d64 is passed for wls install.
INFO: Executing the command /gridControl/WLS/jdk16/jdk/bin/java -d64 -Djava.io.tmpdir=/gridControl/WLS/.wlsinstall_temp -Xms128m -Xmx1024m -jar /u01/binaries//wls/wls1035_generic.jar -mode=silent -silent_xml=/gridControl/WLS/.wlsinstall_temp/wls.xml -log=/u01/oraInventory/logs/installActions2013-07-04_11-07-45PM.log.wls -log_priority=debug
INFO: Extracting 0%....................................................................................................100%
INFO: ERROR STREAM: *sys-package-mgr*: skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'
INFO: #
INFO: # A fatal error has been detected by the Java Runtime Environment:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0x0000003a23689cdc, pid=24834, tid=139710737405696
INFO: #
INFO: # JRE version: 6.0_24-b50
INFO: # Java VM: Java HotSpot(TM) 64-Bit Server VM (19.1-b02 mixed mode linux-amd64 compressed oops)
INFO: # Problematic frame:
INFO: # C [libc.so.6+0x89cdc]
INFO: #
INFO: # An error report file with more information is saved as:
INFO: # /tmp/hs_err_pid24834.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
INFO: Return value is 134
INFO: POPUP ERROR:Installation of Oracle WebLogic Server has failed, check log files for more details.
The line "skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'" is the one that's worring me. Can it be corrupt? Or it is something else?
Thanks in advance.Its too early to conclude the issue is a bug with out looking into the logs. For the same reason i requested you to open an SR so that we can have a look at the logs and identify the cause. If you are Oracle employee then you can share the VM details else we need logs to debug this further. If any one from your company can open an sr and share logs then that will be helpful. Can you also check if the shiphome that you downloaded is all correct and checksum/byte matches to what is mentioned on OTN.
-
Data Guard configuration for RAC database disappeared from Grid control
Primary Database Environment - Three node cluster
RAC Database 10.2.0.1.0
Linux Red Hat 4.0 2.6.9-22 64bit
ASM 10.2.0.1.0
Management Agent 10.2.0.2.0
Standby Database Environment - one Node database
Oracle Enterprise Edition 10.2.0.1.0 Single standby
Linux Red Hat 4.0 2.6.9-22 64bit
ASM 10.2.0.1.0
Management Agent 10.2.0.2.0
Grid Control 10.2.0.1.0 - Node separate from standby and cluster environments
Oracle 10.1.0.1.0
Grid Control 10.2.0.1.0
Red Hat 4.0 2.6.9-22 32bit
After adding a logical standby database through Grid Control for a RAC database, I noticed sometime later the Data Guard configuration disappeared from Grid Control. Not sure why but it is gone. I did notice that something went wrong with the standby creation but i did not get much feedback from Grid Control. The last thing I did was to view the configuration, see output below.
Initializing
Connected to instance qdcls0427:ELCDV3
Starting alert log monitor...
Updating Data Guard link on database homepage...
Data Protection Settings:
Protection mode : Maximum Performance
Log Transport Mode settings:
ELCDV.qdx.com: ARCH
ELXDV: ARCH
Checking standby redo log files.....OK
Checking Data Guard status
ELCDV.qdx.com : ORA-16809: multiple warnings detected for the database
ELXDV : Creation status unknown
Checking Inconsistent Properties
Checking agent status
ELCDV.qdx.com
qdcls0387.qdx.com ... OK
qdcls0388.qdx.com ... OK
qdcls0427.qdx.com ... OK
ELXDV ... WARNING: No credentials available for target ELXDV
Attempting agent ping ... OK
Switching log file 672.Done
WARNING: Skipping check for applied log on ELXDV : disabled
Processing completed.
Here are the steps followed to add the standby database in Grid Control
Maintenance tab
Setup and Manage Data Guard
Logged in as sys
Add standby database
Create a new logical standby database
Perform a live backup of the primary database
Specify backup directory for staging area
Specify standby database name and Oracle home location
Specify file location staging area on standby node
At the end am presented with a review of the selected options and then the standby database is created
Has any body come across a similar issue?
Thanks,Any resolution on this?
I just created a Logical Standby database and I'm getting the same warning (WARNING: No credentials available for target ...) when I do a 'Verify Configuration' from the Data Guard page.
Everything else seems to be working fine. Logs are being applied, etc.
I can't figure out what credentials its looking for. -
Building reports around grid control database.
As a part of Grid control support activity many times we need spend hours to verify if all the targets have been assigned rules and thresholds so that they can generate alerts well before the trouble occurs.
So i was wondering is there any way by which which can write some script that will scan all the targets and find out which are not assigned to rules.
I am not sure if i can access these information from grid control database.
Can somebody help me in this ? is there any way to find out which rules have been assigned to which target or what is the threshold assigned to a particular targets by writing sql query / using oracle packages ?
Appreciate help in this regard.Here is some sql I use for this purpose..
(I comment out pieces and such to tweak what I am reporting against)
Run this as sysman in your repository db.
select
target_type,
target_name,
metric_column Metric,
metric_name || ' ' || key_value Name,
decode(warning_threshold,' ',null, decode(warning_operator,'Equal To','=','Not Equal','!=','Greater Than','>','Less Than','<',warning_operator) || ' ' || warning_threshold) Warning,
decode(critical_threshold,' ', null, decode(critical_operator,'Equal To','Not Equal','!=','=','Greater Than','>','Less Than','<',critical_operator) || ' ' || critical_threshold) Critical
from mgmt$metric_collection m
--where target_type = 'oracle_emd'
--and metric_column = 'HostInfovszGrowth'
--and warning_threshold != '20'
--where target_type = 'host'
where-- metric_column like 'tnsPing'
-- (warning_threshold != '80' and critical_threshold != '95')
--and
target_type = 'oracle_database'
--and target_type = 'host'
--and
--target_type = 'oracle_listener'
--target_type = 'oracle_emd'
--and metric_column like 'generic%'
--and warning_threshold like '%ORA%'
and target_name like 'QL%'
and metric_column = 'pctUsed'
order by 1,3,2 -
Performance reports using Grid Control
Hello!
Can we create and schedule database performance reports using oracle 10g grid control?
Thanks.Hi
Yeah its possible to generate the performance reports using Grid Control.
Ex:
Oracle Enterprise Manager GRID Server contains built in reports to support Database Administrators to generate sightly reports.
First Thing is to click to "Reports" tab on the top, right hand side of the GRID Management Console (figure_grid_management_console). This page is where all the predefined and custom reports can be find. Now click on the "Create" Button on top of the page to create a new custom report. "Create Report Definition" page comes to the screen. There are four tabs for the definition of the report. -
How to monitory Siebel and E-business with Oracle Grid Control 12c
Hi All,
Please i need any documents for Monitoring Siebel and E-business with Oracle Grid Control 12c.
Thanks in advance,
MostafaI would think this is indeed the only way to monitor the URL.
Perhaps you could try a solution in creating your own plug-in.
Check http://www.oracle.com/technetwork/oem/extensions/index.html for this.
Regards
Rob
http://oemgc.wordpress.com -
Is grid control 12c certified from Oracle?
From oracle reading, Grid Control 11g will be upgraded to Cloud Control 12c. But is Cloud Control 12c Oracle certified?
On metalink, certification tab, I can find Grid control 11g certification, but cannot find 12c certification, there are misc messages on that Enterprise Manager group.
Can someone shed some lights? I will really appreciate it.
Thanks
S.For 12c forget Grid Control and use the term Cloud Control. How do you know Enterprise Manager Base Platform - OMS is Cloud Control? Good question... it just is.
If you enter Enterprise Manager Base Platform - OMS, Release:12.1.0.2.0, Linux x86-64 Oracle Linux
And follow the link:Certification Details for Notes and Support information you will see "Enterprise Manager Base Platform - OMS 12.1.0.2.0 is certified on Linux x86-64 Oracle Linux 6"
Eric -
Can OEM Grid Control(12c) can provide the KPIs trend reports/analysis?
Hi experts:
Can EM cloud Control(12c) can provide the following trend reports/analysis for Report Servers(11gFMW report service)?
average response times
current job load
job load
failed job ratio
current jobs
etc.
If EM cloud control (12c) have not the indicators , Can we progmram to realize the above indicators and save the indicators to EM cloud control database?
If we can do programming to monitor the indicatiors, Is there any development documents to reference?
Thanks
Regards
EdwardAny update?
Thanks -
Oracle PeopleSoft Enterprise Manager Plugin Installation on oem grid control 12c facing error
Hi Friends,
I am planning to monitor Peoplesoft 8.52 HRMS application through oem 12c grid control. First I have installed 12c grid control successfully. Followed by I am installing the Oracle PeopleSoft Enterprise Manager Plugin in 12c oem repository containing 11g database. I am facing configuration assistant error message as below
OUI-25031 some of configuration assistance failed.
Configuration assistant "PeopleSoft Environment Management Repository Plug-in" failed
The "/u01/oracle/cloudcontrol/middleware/oms/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Please assist me how shall I proceed further...
Regards,
Rajesh PachiyappanHi,
I just came across the same problem.
In my case, I hit this issue while trying to reinstall Oracle EMCC 12g.
Since previous installation failed, I decided to start from the beginning again but I am now hitting this.
Before trying to reinstal, I dropped SYSMAN and a few other users created on the provided DB.
Did you solve this issue?
I believe I may have not "clean up" the database properly. Which would be the right way of wiping out the DB without actually rebuild it again?
Thanks
Angel -
Using Data Pump from Grid Control to import schema
Hi,
I have 2 10g oracle databases on 2 different windows servers. The databases are called: source and dest.
In dest I have created a database link to source.
I want to import a schema from source to dest.
I log on Grid Control and in the maintenance tab I click the link Import from database.
I choose import from schema and the database link I created earlier.
I then choose the schema name.
In the page Import From Database: Options I expand the advanced options.
I choose Exclude Only Objects Specified Below and I add a row that looks like this:
object type: TABLE
object name expression: EXCLUDE=TABLE:"IN('TEST6', 'TEST7')"
As I submit the job I get this error message:
Import Submit Failed
Errors: ORA-39001: invalid argument value ORA-39071. The value of NAME_EXPR is misformed. ORA-00920: invalid relation operator.
I have tried several ways, but I am still getting the same error.
Any suggestion will be appreciated.Hi,
Thanks for your replay.
I have already tried the following with back slash:
EXCLUDE=TABLE:\"IN('TEST6', 'TEST7')\"
and I get the same error message.
If you have the correct syntax could you send it to me?
Regards. -
How to delete a management agent from grid control completely?
I have installed oem grid control 10.2.0.4.0 on single host(oemlinux.oracle.com), and I removed agent10g, and reinstall a new management agent into a new location, but when I wanted to add a weblogic server to monitor, I got error as below:
More than one Enterprise Manager Agent was found for the host.oemlinux.oracle.com
I found there were 2 agents in em console, how to delete the old agent from em console,anybody can help me?Click on the All targets tab, delete the agent.
Then confirm that the delete is in fact happening.
Click Setup, Management & Services Repository tab.
Deleted Targets link.
Time Deleted Completed must have a date in there...
If all that fails - do a quick search - I posted the sql you can run against the repository to wipe it clean of an agent :-)
Not too that if you are removing the O/S software - you need to use the runinstaller to remove the Oracle Home from the inventory.
If you don't do this - future auto installs using the agentDownload script of the agent will fail.
.Daryl -
Daily Report using Grid Control
Hi guys
I would like to know if there is a way to schedule some daily reports under the Grid Control?
There are some cool reports that I wish to receive automatically in my mailbox everyday.
I don't know how to do that.
Thanks
Brahim DRIHEMHi,
It's very simple.
Select your report (with the radio-button) and click Edit.
Go to the schedule tab
Select "Schedule Report"
Select "Repeating" and fill out the details here
select "E-mail report each time the scheduled report completes"
Enter your mail address
Press Ok button.
Hope this helps.
Maybe you are looking for
-
I bought an iPhone 5 at Best Buy, and they started the setup assistant process. Now I can't go back and start over so I can sync my phone to my iTunes account. I have an old iPhone 3GS and didn't use the iCloud. I backed up to my computer. And no
-
How the Landscape of BO - SAP BI (Dev, QA, PROD)
Hi, I wanted to know how the landscape will be for BO -BI system. In Bi system if we create any report in Dev, then collect transport and move to QA, later that transport to PROD. But in the case of BO reports based SAP BI/BW as datasource. How we co
-
Hey is there anyone on the forum editing AVCHD footage in FCS 2 on there Mac Pro 8 Core 2.8 GHZ.Would be great to hear how users machines are performing with this new format. thanks Alex
-
LAP management questions.
I'm configuring a 2500 series WLC to test some wireless configuration changes we'd like to make on our 5500's that are currently in prodcution. The 2500 and the 5800's interfaces are configured as a LAG. One of the primary goals of these configuratio
-
Can't install Extention Builder 2.1 generated ZXP-file
Hi, I just build a *.zxp file from Exension builder 2.1 trial. It generates the file without any problem, but when installing it using Extension Manager CS6 6.0.7.6. it gives me this error: 'plugin.zxp' is not a valid Creative Suite Extension. Creati