Report group ( Trans. GR55 and GR51)

We have different SAP instances or servers. I need to create a new report group in a server called Fusion. Those report group already exists in the company but there are in other server called PRMO.
I went to PRMO to take a look to the report group configuration, and then i went in Fusion thru the transaction GR55 and GR51 to create the same report groups, but i can´t replicate the configuration, because in Fusion does not exists the table ZZHPPRT
and also does not exist the library ZRP.
Do you have any suggestions? Am i supposed to create these table and library in the server? How can i do that?
Thanks for your help.

Hi
Export the library from the server where it exists using GR27
and import into the other server using GR28
similarly you can export and import reports using GR37/GR38
report groups using Gr57/Gr58
Regards
Sachin
Edited by: Sachin Bhutani on Sep 23, 2009 3:30 AM

Similar Messages

Search t-code of report group in GR55

Dear Experts,
How can i search t-code of report group in GR55;
for example :
The report group: 6OI2 in T-code: gr55 is bound wtih t-code : S_ALR_87013003 ;
Br
Sophie

Hi Sophie,
In table TSTCP, maintain the parameters field with RWD_SREPOVARI-REPORT6OI2 and execute. You may see multiple transactions assigned to GR55 report 6OI2. You can replace 6OI2 with other report groups to find report painter/writer transactions in SAP.
RWD_SREPOVARI-REPORT*6OI2* means -
RW - Report Type
SREPOVARI - Table that stores Reports and Variants
REPORT - Name of Report
There are many ways to find a transaction assignment, i guess this is an easier one for report painter transactions.
Best Regards,
Venkata Ganesh Perumalla

How to create Report group in GR55

Hi gurus,
I have to create new report group for special purpose ledger for getting report in GR55 please assist me how to create the new report group?
Initiatives are highly appreciated and rewards with points.
Regards
Chandra

Hi,
Use trns code GR55 then go to menu "Report group" there u can find create ,change and display options.
Regards,
Krishna

SSRS Report Group By Vertical and Horizontally with Detail Data

Dears,
I am expecting your help to achieve blow task in SQL Reporting Service. I am pulling data from a SharePoint List and my data set looks like below; and, I need to show those data in following layout;
Group by: Destination and Week (vertical, horizontal)
Detail : JobNo and VessleName (no aggregation and should show detail text data)
How could I show that in SSRS Report? I tried Matrix and couldn’t get that layout yet; it shows me always 1<sup>st</sup> Job NO and Vessel Name for each Destination, not showing the rest.
Kindly share with me guide lines attached is for your reference.
ASP.Net, C#.Net, SQL Server ,Win32

Dear Ricardo,
I was trying your project with my real data and was not success.
Also, when I check in details with my test data, I saw that Job2 is missing in your output.
I can not find any reason why it is missing, could you please tell me what could be the reason?
Also, it takes first lines of each Destination form below data as well, appropriate if you can test below data also.
with SampleTable(Destination,WekkNo, JobNo, VesseName, ATA)
as
Select 'GENOA-ITGOA' , '7','J507979', 'AL BAHIA', '14/2/15' Union All
Select 'GENOA-ITGOA' , '7','J507981', 'AL BAHIA', '14/2/15' Union All
Select 'GENOA-ITGOA' , '7','J508342', 'SABYA', '14/2/15' Union All
Select 'GENOA-ITGOA' , '7','J508343', 'SABYA', '14/2/15' Union All
Select 'GENOA-ITGOA2' , '7','J508418', 'SABYA', '14/2/15' Union All
Select 'GENOA-ITGOA2' , '7','J508342', 'SUDAIR', '14/2/15' Union All
Select 'GENOA-ITGOA2' , '7','J508343', 'SUDAIR', '14/2/15' Union All
Select 'GENOA-ITGOA' , '8','J508418', 'SUDAIR', '20/2/15' Union All
Select 'GENOA-ITGOA' , '8','J508606', 'JAZAN', '20/2/15' Union All
Select 'GENOA-ITGOA' , '8','J508607', 'JAZAN', '20/2/15' Union All
Select 'GENOA-ITGOA2' , '8','J508608', 'JAZAN', '20/2/15' Union All
Select 'GENOA-ITGOA2' , '8','J509006', 'HANJIN ELIZABETH', '20/2/15' Union All
Select 'GENOA-ITGOA' , '8','J509007', 'HANJIN ELIZABETH', '20/2/15' Union All
Select 'GENOA-ITGOA' , '8','J509129', 'HANJIN MALTA', '20/2/15' Union All
Select 'GENOA-ITGOA2' , '10','J509130', 'HANJIN MALTA', '7/3/15' Union All
Select 'GENOA-ITGOA2' , '10','J509326', 'SUDAIR', '7/3/15' Union All
Select 'GENOA-ITGOA' , '10','J509327', 'SUDAIR', '7/3/15'
Select * from SampleTable
ASP.Net, C#.Net, SQL Server ,Win32

Setting permissions on a report group

I have created a new report group in P6 and added a bunch of reports to it.
is there anyway to restrict who sees this report group ?
Or a way to hide it ?
Edited by: Jay on Jan 6, 2011 12:21 PM

You cannot set permissions on a group, however you may wish to consider using reports 'owned' by a project. Simply open this special project along with the projects you wish to report on.

About report groups and read programs for the object EC_PCA_SUM

Hi Friends,
Hope every one is doing well..!
I've an issue with the report groups and read programs for the object EC_PCA_SUM. As we know that the report groups and read programs available for this object in the application customizing are used to analys the archived data.
That is these programs comes into picture after the archiving operation.
For more information, you can visit the below web site:
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/e4/69f353b75a11d1b5850000e82debc6/frameset.htm]
Now, my question is how would I check the code for these analysing programs available for this object. I can't see this in SE38.
Thanks to reply for this..
Full marks will be awarded.
Regards,
Shamim

Hi Lakshman,
Thanks for the reply.
Hi Deiter,
You're right.
Your provided transaction "GR55" helped me to find out the program name for a particular group. However, these are just Write and Painter reports.
But can you please let me know the functionality of these report groups ?? what are these used for ???
Do we have these programs for other archiving objects like CO_ITEM,CO_ML_BEL,MM_MATBEL,CO_ORDER,
PP_PLAN,PP_BKFLUSH ??
More points will be awarded.
Thanks a lot.
Regards,
Shamim
Edited by: S H A M I M on Sep 19, 2008 3:19 PM

Regarding Report Group-GR55

hi friends,
      I am running a report group using the T.Code GR55. In the selection screen when i enter the Fiscal Year-2007 and then run the report group it is generating an output. after that we are double clicking on the particular field on the output it is calling an abap program which has the fiscal year in the selection screen.but the ourput it is generating is showing all the values including 2006 and 2007. i just want to know the link between the report group and abap program ie if it is calling nay interface inbetween(also how the values are passed from the report group to the selection screen of abap program).

report group.....u r working with report painter right???
u need to use range table here ............
Using ranges you can achieve this
loop at seriegem into wa_seriegem.
    wa_xblnr_r-sign   = 'IN.
    wa_xblnr_r-option = 'CP'.
    concatenate wa_seriegem '%' into wa_xblnr_r-low.
    APPEND wa_xblnr_r TO r_xblnr.
endloop.
SELECT SINGLE * INTO lr_bsid
FROM bsid
WHERE xblnr IN r_xblnr
reward points if helpful....

How to use GR55 and Report Painter in SAP?

Thanks and regards,
Sudhajiban

Dear,
Report Painter is a tool through which you can create your own reports
The T-Codes as GR51, GR52
and to execute the reports you have to you T-Code GR55.
Br,Vivek

I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the "Recommendation Report" screen, I clicked "Non-Included Trans." and saw that one of the vendors (Vendor Code: WILCO) has the followi

Hello,
I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the “Recommendation Report” screen, I clicked “Non-Included Trans.” and saw that one of the vendors (Vendor Code: WILCO) has the following error:
“The document amount is greater than the max. amount allowed in the payment methods linked to the BP”
Upon checking, the “PCF-W” Payment Method linked to WILCO does not have any restrictions, nor does WILCO have any credit/commitment limit set. I have also appropriately defined the Dummy Business Partner Bank (under Payment Terms) as well as checked the “Included” box for PCF-W on the Payment Run-Payment Methods screen.
Could anyone please help me on this?
Salamat,
Cat

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Report painter libaries and report group

Hi,
I would like to seek advice on the relationship of libaries and report group.
1
in GRR2 navigation, i can see libary and report but i do not see report group in the navigation structure. So I would like to know what is the purpose of report group?
2
From the help it says "A report group is a group of reports and parallel reports from the same library which need to be processed together in one run."
So my question is, since the report already grouped in a single library, why still need to defined report group?
3
Normally we just run by report that we interested in. So what does it mean "A report group is a group of reports and parallel reports from the same library which need to be processed together in one run".
4
Possible to have different report group in a library?
Example library ZA1 has 2 report group ZG1 and ZG2. If can, what is the implication to have more than 1 report group.
Thanks
help.sap.com

hi
report group is used to identify the reports belongs to which functional part.
example
FI Standard Report
CO Standard Report etc..,

Report group and report library does not exist

Dear Guru's
We are not able to execute the report S_ALR_87013019 in production. After doing analyses, we came to know that library 602 & report group 6OBU does not exist in production, and hence we are not able to excute this report.
We have to tried to import from client '000' from transaction code GR59, But in that we are not getting 6OBU report group.
Please help us to resolve the issue, as we required this report on priority basis.

Dear Prashant,
Thanks for your reply.
The solution given by you is to transport the report library from Dev Client. But our client does not transaport the reports in production system.
Is ther any other solution to retrieve the library.
Thanks
Varsha

Create Report on List , group by data and email as PDF

Hi ,
I have a survey List , that contain 7 Question and each question have 5 possible answers (Radio Button , between Strongly agree to strongly Disagree).
How can I create a report on the list , and send the email to instructors that are also stored in List .
How can we create a report with group by clause and send as a PDF in attachment?
Thanks

You have to programmatically convert all content to PDF and then email it.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9e38ed97-5156-448d-af71-cf5e949535d6/how-can-i-export-sharepoint-list-item-form-view-to-word-or-pdf?forum=sharepointcustomizationprevious
Try below 3rd party
http://blog.muhimbi.com/2010/08/converting-sharepoint-lists-to-pdf.html

Historical of view of reports from PS (using transactions GR55 and CJE0)

Hello,
I would like to know who access projects reports (on accounts (transaction GR55) and on projects (transaction CJE0)).
I found only that :
- transaction GR52 : who access the latest and when, and how many times the report was called (historical)
- transaction CJE2 : latest call and number of calls (report parameters - BasisInfo)
Is there another way to have more informations ?
Many thanks in advance,
Kind regards,
Sandrine

Hi,
There are a few basis transactions that gives similar set of details. Please check the below link from one of the forum posts.
User Login Details
hope this will be helpful.
Regards
Sreekanth

Report Groups and Libraries

Hi,
I have a query related to report groups download. We had a requirement of moving reports from 4.6 systems to 4.5 systems. So we downloaded the report groups from 4.6 system into our local hard drives (and thought of uploading in 4.5 systmes thereafter). But while downloading we got several warnings. One of those warninigs is as:
W-R3OB REWR RGVD\CCSS\ZC-PLN-TOTAL-YTD-V2 >>> group 0101PMCO100EXEC not transported
W-R3OB REWR RGVD\CCSS\ZC-PLN-TOTAL-YTD-V2 >>> Transport groups separately if necessary.
We ignored this warning and tried uploading the report group in 4.5 systmes. There while uploading we got many errors for the report groups. One of which is like:
E-R3OB SETS STSO\0000ZFNCOSTCTRGP.CCSS >>> Unknown subset in set 0000ZFNCOSTCTRGP.CCSS
E-R3OB SETS STSO\0000ZFNCOSTCTRGP.CCSS >>> Import of object unsuccessful, object not imported
Being unware of this sets theory in report groups, i am looking out for some expert advise if somebody has dealt with this kind of problem anytime.
Thanks and Regards,
Kishore.

Hi,
I don't know if its possible to suppress/hide libraries/reports.
Create T-codes for the reports the users really need and add the reports to the corresponding area menu in SAP. Thus users don't have a need to use GRR3 anymore, remove the T-code from the authorization concept.
best regards, Christian

Reporting level Currency translation and group level Currency translation

Hi All,
Could any body explain me reporting level Currency translation and group level Currency translation.Please expalin me step by step scenario.
Thanks in advance.
Setty.

Hi Jian,
In my recent implementation completed, business only had one currency to deal with i.e. USD. Data was coming from ECC and we loaded all the data in LC instead of USD using transformation *NEWCOL(LC). Next, you can maintain a rate of 1 in the rate model and run the currency conversion.
This will generate the same data values against USD. So, your statement " if we load LC and than convert it into USD, the data vulu will de double." is incorrect. In the system, you will have same set of values against LC as well as USD.
I suggest that you configure Currency Conversion for future reqmts if any.
Regarding BCF, balances from previous year (Balance Sheet Accounts) will need to be carried forward as opening balances to next year else your BS won't give true picture.
Regards,
Ashish

Report group ( Trans. GR55 and GR51)

Similar Messages

Maybe you are looking for