Report in Condensed Mode
I want to print report somewhere in condensed and somewhere in bigger font. I also would like to control the page setup and printer (form feed, eject etc) programatically. I haev seen the prt file but unable to use it. Can someone send me a sample report file for my reference. Please mail me to [email protected]
Thank you,
Dwijesh, India
Hi all,
This is to inform that I have myself found the solution. It is possible to print matrix report in condensed mode. The method for printing is same as for any other report. The mistake I made was not checking whether the .prt file is getting referred correctly. The DESFORMAT system parameter was getting populated through the calling form. By referring to the correct .prt file the problem got fixed.
Regards,
Jayram
Similar Messages
-
Matrix report in condensed mode in dot matrix printer
How can we print a 10g matrix report in condensed mode in dot matrix printer? The dot matrix printer is a Epson LQ 1070+ printer. I am tried using a printer definition file and given printer codes in the report. The printing is not taking place in condensed mode. This method however is working for other reports. Could any one help?
Regards,
Jayram
Edited by: jayramkumars on Feb 6, 2009 12:11 AMHi all,
This is to inform that I have myself found the solution. It is possible to print matrix report in condensed mode. The method for printing is same as for any other report. The mistake I made was not checking whether the .prt file is getting referred correctly. The DESFORMAT system parameter was getting populated through the calling form. By referring to the correct .prt file the problem got fixed.
Regards,
Jayram -
Condensed mode printing in graphic mode printers
Dear sir.
I am using Reports-6i as developer tool.
while developing reports i use to run in character mode,
Before generating the report i will pass prt file, and also before printing code
should be condensed.
The report get printer in dot matrix printer as condensed mode ,
What i need is the same should print in HP desk jet or any graphic mode printers
by taking care of software.
please guide in this regard.
mathapati.Please try the following:
1) in printer settings, in advanced tab "print directly to the printer" must be selected.
Hope this helps.
Bob -
Zreport print in condense mode
Hi Guru,
I'm trying to print my Zreport (i.e. classic view) using zdevice type, it prints in condense mode where as the same report print in development its print without condense. I'm check all setting its same on both server i.e. development and production. Help me.
Gokul
Edited by: Gokul Borse on Apr 10, 2011 1:57 PMHi Gokul Borse
For Lable printing better u can use the Sap Sprint method S,
1. First configure the printer any one of the Pc or Server( windows os). in that just install the Saps-print server which is available in the service market place.
2. In SAP T code SPAD setting Device type :EPESCP,
Host Spool Access method - S Print Using SAP Protocol
Host Printer name - ( In which pc running Sap S print server one that printer name)
Destination host - (Ip address or DNS Name for the PC or Server in which the SAP S print server running)
Try this
regards
Sriram -
Print landscape report in character mode
Hi!
It seems that I should change xxx.prt file in DESFORMAT parameter to match different kinds of printers in order to print landscape report in character mode.
Our customers are international wide. How can I do to make this setting meet every customer for printing reports in landscape style?
We will run the reports on Unix on the middle tier and customers read them in browser.
Thanks for help.
nullHi,
This sounds like a similar problem that I had (and still having). It was (is) a Bug. Go to metalink.oracle.com and reference this bug#1413754. See if this is your problem as well. My only work around was change the format of the file instead of using character mode I am now using PDF. Which is working fine for me.
~Vannette -
How to print the script in condensed mode
Hi to all,
Pls help me.
How to print the script in condensed mode and particular window only print in the condensed mode.Hi,
Hi
It will remove the blank spaces in front of the variable
and if you use the extension NO-GAPS
It will remove all the blank spaces in the variable field.
DATA: ws_val1 type char12.
ws_val1 = ' 100 123'.
Condense ws_val1.
Write / ws_val1.
Condense ws_val1 no-gaps.
write / ws_val1.
It will give output as
100 123
100123
The CONDENSE statement deletes redundant spaces from a string:
CONDENSE c NO-GAPS.
This statement removes any leading blanks in the field c and replaces other sequences of blanks by exactly one blank. The result is a left-justified sequence of words, each separated by one blank. If the addition NO-GAPS is specified, all blanks are removed.
Please check this link for sample code.
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb33e6358411d1829f0000e829fbfe/content.htm
Regards,
Raj. -
Get a Report crashed error while running report using the mode character
Hello,
I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
I'm using report 6i and Oracle 8i.
Thanks in advance for your help.
Regards,
Laurent.Hi Thanks for the response,
In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
Regards,
Laurent. -
I have an Oracle Reports Server 6i and Forms Server 6i on the same machine.
Operation system Windows 2000 Server.
I can not run reports with BITMAP mode after runing report in CHARACTER MODE.
1 report: I run report on Forms server using command line:
rwcli60.exe report=report1.rep MODE=CHARCTER DESTYPE=MAIL DESNAME=MyMail BACKGROUND=YES server=REP_SERVER
It works correct.
When I run report by URL:
2 report: http://myhost/rwcgi60.exe?report=report2.rep DESTYPE=CACHE DESFORMAT=HTML server=REP_SERVER MODE=BITMAP
Report fails with message
REP-1920 character mode runtime incompatible with DESFORMAT of PDF,HTML,HTMLCSS or RTF
Then I restart reports server service and report2 works correct but after runing report1 report2 does not work.
Whats are problem?Hi,
You are running into known bug 2460641. It is fixed in the latest patchset, patchset 13. Please give it a try as it should resolve your issue. If it does not, I'd suggest contacting Oracle Support.
Hope that helps,
Toby -
Unable to open Webi report in edit mode
Hi All,
While i am trying to open a web intelligence report in "Modify" mode, its throwing an error "The document cannot be created or opened. The error code is: FILE NOT FOUND."
Please let me know how to retrieve the report as i am not having a back up of the reports.
Version: BO XI 3.1 SP3
Regards,
AkhilHi Akhil,
Generally if the "Preferences" you have set in InfoView for Creating/Modifying webi documents is Desktop, then this error is thrown.
You have 2 choices:
01. Change the preferences to "Web" and try the workflow.
02. Do this workflow where WebI Rich Client is installed.
Thanks
Niranjan -
Fold/Unfold (Outline) in BO 4.0 Webi Report - in Reading Mode do not work
I have BO 4.0 Webi report with fold/unfold functionality(Outline). It works fine when I open it in Design mode but do not work in Reading mode. Could anyone please advise if they have faced such issue?
Thanks in Advance.
Regards,
AnitaHi All,
I checked with the BO authorization team who grant access to different user groups to access BO reports. It means that I was not having the access rights to view my report in "Rich Internet Application" mode. Once the access permissions were granted to my user group. I see the option as highlighted in red below. To view the report in reading mode in BO 4.0 BI Launchpad, you should set the preferences as below:
Thanks for your support.
Regards,
Anita -
How to do a report in CHARACTER MODE?!
I have to do a report in CHARACTER MODE
and to print it to a EPSON LX-850 printer.
My report must have 21*9.5 cm (Width*height)
I did :
- in the Property palette of report Unit of measurement=centimeter
- in the Property palette of Main Section : Width=21,Height=9.5 and
in character mode Width=80 and height=22
- in System parameter the parameter MODE=CHARACTER and
the parameter DESFORMAT=R80x22
I did a file R80X22.PRT which contains :
printer "epson10cpix6lpi"
height 22
width 80
before report esc"@"
hilight overstrike
return control(M)
linefeed control(J)
When I print , the printer tear off the whole page A4
and didn't stop after 9.5 cm which is the height of my page in report.
What to do to stop the printer after the height of page in my report (9.5cm)?
Please help me!
Thank you!What happens when you generate the report to file and look at the file? Does it look like it's generating to the correct size before the end of page marker?
-
How to print a report in draft mode from oracle ids 9i?
Hi...
I m using oracle ids 9i.i want to print the report in draft mode.Is there any option in reports developer or forms developer to print report in draft mode?
Please anyone help me?
Regards...
KSIKaji,
try the Reports forum: Reports
Frank -
Setting Paper Size while printing reports in character mode report
Hi
I am using developer suite 10g and am able to print the reports in char mode.
but i have a small problem, i am unable to select the paper size while printing
i select the parameters in a form and click on run report button
this button helps me to get the data print directly
but it takes the paper size as 12" height every time.
where as my requirement is for difftent sizes. like 6", 9" height
if i can select the size at runtime i can get my work done.
can any one help me in this. its very urgent.
Regrads
BhaskarHI, I My self writing , who created this question, as I got sucess in changing the font size.
my dflt.prt in printer folder has the following,
printer "dflt"
height 46
width 130
after page control(L)
return control(M)
linefeed control(J)
code "1" esc "G"
code "2" esc "H"
code "3" esc "4"
code "4" esc "5"
code "5" esc "W1"
code "6" esc "W0"
code "7" esc "C"
code "8" control(O)
code "9" control(R)
I am able to increase the font size using code &5 and & 6 for the fileds or lables in report.
But how to reduce the font size ???
which code should I use in printer file. Our dot matrix printer is of type EPSON. -
Drill down reports in character mode
How to make drill down reports in character mode(remember not bitmapped)using report designer 6
nullI solved the problem in UNIX with this script, replacing the special characters:
sed -i 's/special_1/¡/' $salida
sed -i 's/special_2/¢/' $salida
sed -i 's/special_3/£/' $salida
sed -i 's/special_4/¤/' $salida
sed -i 's/special_5/¥/' $salida
sed -i 's/special_6/¦/' $salida
sed -i 's/special_7/§/' $salida
sed -i 's/special_8/¨/' $salida
sed -i 's/special_9/©/' $salida
sed -i 's/special_10/ª/' $salida -
Pls help! urgent! report in character mode
Hi all,
I have reports in Character mode.
In report designer, I have some text boxes in bold.
when I apply .prt file(like hpl.prt), the report output file will be inserted bold escape sequence before and after text boxes (like "(s7B" and ""(s7O").
My problem is the bold escape sequence only added into some text boxes, others are lost.
But when output the report on screen in character mode, it looks fine with bold and underline properly.
Did you have the similar problem with character report? how to sovle it?
Thanks in advance!!
AppcatHi,
You are running into known bug 2460641. It is fixed in the latest patchset, patchset 13. Please give it a try as it should resolve your issue. If it does not, I'd suggest contacting Oracle Support.
Hope that helps,
Toby
Maybe you are looking for
-
No longer connects to ONLY my website
I've always been able to wirelessly connect to any site that's up until about 3 weeks ago. I turned on my Macbook and tried going to my website and it didn't load, so I thought it was just down so I came back to it about an hour later with no change.
-
Interface Sony (Digibeta) DVW-A500 to iMac and final cut pro x
Hello all, I am looking for a way to import (capture) footage from the DVW -A500 Digibeta deck into an iMac, (OSX mountain lion Final Cut pro x ) with XLR out for two channel audio and component out for the video. I have a Canapous ADVC110 but the pr
-
Cannot manually drag window size in 7.0 or now 12.0
I have been using FF for some time. I seem to have lost the ability to drag the edges of the windows smaller. I also have IE, and can do it there...maybe I'm just confused, and never had the ability to do this in FF. Often, especially when typing in
-
I am trying to retrieve the full serial number on a SLS install. The serveradmin tool stars out the last 4 digits, and when try and get it via the command line serveradmin fullstatus info I get the same info.. is there another way to get the full ser
-
How do I get UK Spelling to work?
I've turned on and changed everything that I would think is UK spelling. But I'm still getting things like "customise" insisting it needs a z. it's not annoying. It's REALLY ANNOYING. What version of English is primarily used in India? And while we'r