Report in text format show break page !!

when i generate a report in char mode, in a text file, it show a break page between the head section and the principal section. there is any way to delete this break page (a line command or properties ( i specify a desformat no_ff)).
thanks.

To get a output data to a text file that contains no form feeds ( page breaks ), or other control characters in the output), do followings:
Modify the printer definition file to eliminate form feeds
a. Invoke a text editor and open the file dflt.prt.
b. Move to the following line:
after pages control(L)
Remove "control(L)" so the line appears as shown
below:
after pages
Removing the control sequence from the printer definition file will keep the output from breaking between pages when the report is formatted.
Thanks
The Oracle Reports Team

Similar Messages

  • Blank Lines in Oracle Reports in Text Format

    Hi all,
    I m in a problem that , I generate an Oracle report in text format there is two additional blank lines in text format.But when I view this report in report editor there is no blank lines.There is actually only 15 lines in my report but in text format it shows 17 lines.How can I avoid this prblm.pls help.
    thanks
    jobuin

    Is the Design in Character Units set to Yes?
    How are you viewing your layout in report editor? Are you viewing with Grid?
    If it is Yes and with grid, try to fit your layout objects within the Grid.

  • How do I generate a report in text format

    How do I generate a report in text format and send it to both a file and to a printer?
    Solved!
    Go to Solution.

    I run a series of tests on multiple stations and I need to generate a report, both electronic and one to be printed for a DHR (device history record), for each station. If I use file i/o as you suggested is the preferred approach to generate an electronic file and make the report from that, or generate both the electronic and hard copy report from arrays as the measurement data is acquired. Note that the electronic data is more detailed than the data in the hardcopy report.

  • SSRS reports in text format

    hi
    how can i save a report in text format using ssrs 2008 R2

    Hi Gourav,
    By default, SQL Server Reporting Services render a report to .CSV File Extension with CSV rendering extension. While device information settings for the CSV rendering extension allow us to change its format from .csv to .txt format, we can modify FileExtension
    setting in the RSReportserver.config file as below:
    Please navigate to RSReportserver.config file: <drive:>\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\RSReportserver.config.
    Backup the RSReportserver.config file before we modify it, open the RSReportserver.config file with Notepad format.
    In the <Render> section, modify the code for the CSV extension like this:
    <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
            <Name Language="en-US">TXT (Pipe Delimited Text File)</Name>
        </OverrideNames>
        <Configuration>
            <DeviceInfo>
                <FileExtension>TXT</FileExtension>
            </DeviceInfo>
        </Configuration>
    </Extension>
    Save the RSReportserver.config file.
    For more information about CSV Device Information Settings, please see:
    http://msdn.microsoft.com/en-us/library/ms155365(v=sql.105).aspx
    If you have any other questions, please feel free to ask.
    Thanks,
    Katherine xiong
    Katherine Xiong
    TechNet Community Support

  • Export report in text format

    Hi.
    I am still downloading the trial ver of cr 2008, but I would to know urgently that if it is possible to export report in utf-8 text format given the data is retrieved from ms/sql table in ucs-2 format
    Many Tks

    Hi,
    yes it is possible to export a report in text format.
    U just need to do a bit formatting for that.(only for display pupose)
    Regards,
    Misra P.

  • Report in text format

    I have a report need to send (output) in text format thru form 6i , please help

    Hi,
    Try adding there parameters when calling the report. (To view the report, the DESTYPE parameter will be SCREEN
         ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
         ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
    -- If you didn't mention the DESNAME parameter, then the output will be generated in the application folder named report_name.lis
         ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_path>');Regards,
    Manu.
    If this answer is helpful or correct, please mark it. Thanks.

  • Unable to add special characters such as # and ( in headers of Report in Text format

    Hi,
    I am working on developing a report that will be exported to tab delimited text format from SSRS. The Report has been developed and it is getting exported to tab delimited text format. However, special characters in the heading are getting trimmed. I would
    like to get these special characters in the heading of text file. Any help in this regard will be appreciated.

    Hi Abhijit,
    Per my understanding that you have add an extension which export the report as .txt format, now the issue is the special characters"#" not display after exportted, right?
    I have tested on my local environment and can reproduce the issue , this is by default, when you type some special characters "#" as the textbox name  in the properties window or as calculatted field name you will get error pop up window,
    if you type the text in the textbox as "#" it will also not display in the CSV or tab delimited text format report.
    But we have some alternative method to make them display some way, more details information below for your reference:
    Display "#" in the table header
    If we want to make them display in the table header, we need to create an new table an put all the table header as one record in the table, because the value in the table can display "#" correctly：
    I assumed you have four columns as the table header(Test1#,Test2#,Test3#,Test4#) please create an new table (HeaderTable )to store these value:
    Create two dataset2:
    Dataset1: display the record from step1
    DataSet2：display the record of the report
    Create two Tablixs as below and both remove the header column, Tablix1(Dataset1) diplay the value comes from the step1 as the new header column:
     Tablix1(Dataset2):Report Data
    In this way, when export to tab delimited txt, you will got the table header display correctly.
    Display "#" in the textbox outisde of the tablix
    If you just want to display "#" outside the tablix, you can just add an calculatted field(Test) and use expression like below to specify the value which you want to display in the calculatted field:
    ="test######test"
    Then you can use below expression in the textbox:
    =first(Fields!Test.Value, "DataSetName")
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • XML Report in text format

    Hi,
    Can any one help how to create a XML report so that i should be saved in text format OR is there any way where when you click on view output a dialog box with open, save and cancel option appears so that i can save the output in required format.
    Thanks,
    Dinesh..

    Hi Dinesh,
    Can any one help how to create a XML report so that i should be saved in text format
    While defining the respective concurrent program set the output to 'TEXT'. You can do this by:
    Sysadmin > Concurrent > Program > Define  ; and the select or define the program that you want the output to as TEXT
    In the OUTPUT field ensure to have the type as 'TEXT'.
    is there any way where when you click on view output a dialog box with open, save and cancel option appears so that i can save the output in required format.
    Alternative to the above, while submitting the request after selecting your desired concurrent request , click on Option and change the output type.
    Hope this Helps!
    Thanks &
    Best Regards,

  • How to get AWR report in text format

    Hi all,
    Here we are getting AWR report in html format through OEM.I want to get AWR report in .txt format
    Please help me
    Thanks in advance

    Hi
    You can use the following scripts:
    - ORACLE_HOME/rdbms/admin/awrrpt.sql
    - ORACLE_HOME/rdbms/admin/awrrpti.sql
    HTH
    Chris

  • Text format changing on page load

    Hi all
    I have a rather bizarre problem. On page load my text appears and then I get a brief period of time where line spacing is correct and then it reduces?
    http://www.chatsworthklein.co.uk/home.html
    Any thoughts would be most appreciated as its rather annoying.
    Thanks in advance
    Mark

    Update;
    doesnt do it when I open the file locally?
    I now have the whole text area moving until a graphic appears?

  • Calling a report from the form shows SSO page

    Hi all,
    When a form calls a report, the single sign-on screen apears and the report is not generated until a valid SSO account is provided, can this be bypassed ?
    Oracle 9iAS R2 is used on Windows 2000 platform and forms/reports 9i
    Thanks in advance

    Any one has an idea ?

  • Crystal report : Export to Text format from BI Launch pad

    Hi,
    We are facing issue in exporting the Crystal report to text format option from BI Launch pad view mode. Currently BI launch pad doesn’t support export to Text format option for crystal report in view mode. But export to text format option is feasible in schedule mode. But customer is not interested in exporting the reports through schedule mode.
    Please advise, if we have any alternative way of exporting the crystal report to text format option from BI Launch pad.
    Thanks,
    Chinnu A

    Hi Chinnu,
    The question is better suited to be asked in the BI Platform space.
    -Abhilash

  • Display Text in the Second page of the Report.

    Dear,
    I have a Report With Group G_Emp, having Columns Eno, Ename etc. in a Repeating frame R_1 and
    I have put A frame below this repeating frame R_1 with a Text Item Just for Displaying Comments, so just i want to display this Text Item in the second page and the Employee details in the first page, the restriction is that the Text item should not print in the first page.
    I hope you understand,
    pls help.
    Stalin Ephraim...

    Hi,
    if i understand well you could maybe try this :
    or ) for your A frame below the repeating frame specify break page before = YES
    or ) and if i understand your meaning correctly you want your comment to show once, on a seperate last page -->
    in your layout section move the sdesign for your A frame from the main section into the traileer section.
    regards, E.

  • Extra spaces in TEXT format report

    hi
    i have a report with in the text format, when i generate this report it is generating a space (as end of page) between the pages, and when i save the file as text file these spaces are still their.
    how can we remove these spaces before generating the text file?? , i donot want to change on the text file after generating it
    any tips??
    Mahdi Charara

    hi
    thank you for ur answer,
    i removed the extra line space, but still i have a problem on this report, when it is opening in the text format thier is a junk character appearing instead of the page break, it is a small box with character symbol of "FF" , i donot know from where this character comming, how to remove it?
    is there another way of opening the text result directly from the "view output" option other than opining it in the browser and then save as text?
    Mahdi Charara

  • How can I show only text edits and not text formatting when using print comments summary?

    Acrobat 9.3.0 for Mac.
    Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
    I only want to show text edits, not text formatting changes. So questions are:
    1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
    2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

    Hi,
    You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
    Following idea could be your task flow
    Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
    |
    v
    Router
    1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
    2. if pageFlowScope outcome > 0 then MyPage
    hope it helps,
    Zeeshan

Maybe you are looking for