Report of type "Financial Reporting Report"

Hi All,
I want to import a report of type "Financial Reporting Report" from another system (Say from SYSTEM:"A" to SYSTEM:"B") through workspace .
Is it posibble to import a report of type "Financial Reporting Report"?
Thanks,
Edited by: Josephine on Aug 5, 2009 6:50 AM

Hi,
If you are on version 11 then you either use LCM via Shared Services
or you can go into the workspace and export report to a file, then log into your target workspace and import the file
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Financial Statements report - F.01

Hello,
I posted this question to the abap forum, but maybe you can help me better. As you know, the account amounts from the financial statement report come from financial documents. And when you create a financial document you specify a document type(vendor invoice, vendor payment and many others). What i need to do is modify the report to show only amounts from certain types, not all types. For doing that, i need to know if there is a connection between the financial statement and the documents types. I searched the code of the report and i did not find anything relevant.
Maybe you met this requirement before and talked with an abaper. If that is the case, maybe you can give me a suggestion.
Thank you very much,
Efren

F.01 is build with the following tables. You may go through each table to see if they are document type specific. I would cautio if F.01 is the right report for you/your client.
TABLES:   t001, ska1, bhdgd,
          t011, skat,
          t011t, skb1,
          t009, skc1a,
          t004,
          t009b,
          t009y.
TABLES:   rfsdo.
TABLES:   tgsb.
TABLES:   fimsg.
TABLES:   faglfreesel.

Acount type and Variance reporting on account member set up

Hi
Apologies if the question may seem obvious....
However we are planning on loading monthly actual data into our application from a flat file where revenues are negative and costs are positive. For reporting purposes within the application we need to switch the signage.
Therefore when setting up account members if i tag the account type as revenue or expense will this solve the issue?
Also would anybody know what the "variance reporting" field is used for
Many thanks

Hi,
Variance reporting is good when you report your data from FR or WA as these tools are financially aware of account types and settings in variance reporting.
When you set an account as expense in variance reporting declines (between versions, months etc.) in your data for those accounts are taken as a positive change and vice versa. On the other hand, reduction in non-expense accounts are taken as negative change.
Hence, when you create a report where you define conditional formating on variance field, increases can be shown green in revenue accounts and red in expense accounts.
You can give this a try in Web Analysis by creating a very simple report using Sample:Basic.
The other question you ask for can be done via a calculated field in FR or WA. Or you can create a reporting version in Planning where you can multiply expense accounts by (-1) and leave the rest as they are.
Cheers,
Alp

Financial Analytics Reports in Local Currency

Advise needed to help in configuring BI Apps such that the Financial Analytics reports (GL, Payables, Profitability & Receivables) show the transaction values in local currency i.e. INR instead of the default global currency USD.
I have changed the source parameter values in the DAC Container Setup while loading the data from an EBS R12 instance. The following source parameters values have been changed to INR from USD -
$$GLOBAL1_CURR_CODE (for the document currency)
$$GLOBAL2_CURR_CODE (for the local currency)
$$GLOBAL3_CURR_CODE (for the global currency)
However, the Finacial Analytics Reports do not show any transactional values for the selected Ledger (having INR as the global currency). The data is populated in the Local Closing Amount, Local Opening Amount etc columns of the Fact - GL Balance but no data is populated in the Closing Amount (Global), Opening Amount(Global) etc columns.
Please advise to resolve the above mentioned localization issue in Financial Analytics.
Regards

Are you looking for Changing the Default currency in OBIA Dashboards

How to define reporting time types for 0HR_PT_2 to populate records in rsa3

hi experts,
we are implementing Time and Labour and we are using info provider called 0PT_C01.
for that we have 2 data sources one is 0HR_PT_1 and 0HR_PT_2.
when i check in RSA3 there are records for 0HR_PT_1 Data source, but for 0HR_PT_2 data source it shows 0 records though the related info types have data.
i have checked in sdn for the solution, most of the replies are related to maintain Reporting Time Types.
can you please provide me step by step solution to maintain Reporting Time Types in ECC.
Regards
venuscm

Hi Venu,
You can maintain reporting time types in SPRO,
SPRO > Integration with Other SAP Components -> Data Transfer to the SAP Business Information Warehouse -> Settings for Application-Specific DataSources (PI) -> Human Resources -> Actual Employee Times OHR_PT_02 -> Define Reporting Time Types -> Maintain Reporting Time Types
Check with your HR team about maintaining reporting time types.
[http://help.sap.com/saphelp_46c/helpdata/fr/e8/cb2d28e4ded31184080004aca6e0d1/content.htm]
Regards,
Durgesh.

Create unit cost reports in Hyperion Financial Reporting

Hi,
I have some doubts regarding the creation of "per unit" reports in Hyperion Financial Reporting. In the business model we have:
- different cost and revenue groups (identified by accounts dimension)
- different business channels (identified by business channel dimension)
- units different for each business channel (identified by accounts dimension and by currency dimension)
What would be the most efficient way to easily construct per unit reporting? Reporting should be able to show data as:
(*in principle, the "$ per unit" column is the most important one. The other columns could be hidden without problem)
(**the main challenge is to be able to easily reflect per unit values calculated with different units, depending on the business channel and potentially other dimensions)
More precisely, the questions are:
1. What should be the dimensions structure? Units in separate dimension? Or inside accounts dimension and differentiate with currency dimension?
2. The calculation of per unit amounts should be done within the reporting or should it be precalculated value?
2a. If within reporting - how to technically include this calculations? Show $ and units and then use the formula?
2b. If precalculated - how to solve the problem that the TOTAL per unit values are not the sum of per unit values for each Business channel separately (as each Business channel has its per unit calculated only with the units of this Business channel)? (please take into account that Business channel may not be the only dimension that changes the units to be used in per unit calculation - we can also have different units for different cost centers etc.)
3. How to show $ and units separately, as in the example, if, when limiting a row by Revenue, for example, is making the units value for this row 0? How to overcome this?
Many thanks in advance for your help and best regards,
Pawel

I came up with one concept of how to deal with this problem - let me know what you think. The idea is pictured in the image below:
The answers to the 3 questions using this solution would be:
1. What should be the dimensions structure? Units in separate dimension? Or inside accounts dimension and differentiate with currency dimension?
Units would be a separate account in the "accounts" dimension. But also, units could be differentiated by the "currency" dimension.
2. The calculation of per unit amounts should be done within the reporting or should it be precalculated value?
2a. If within reporting - how to technically include this calculations? Show $ and units and then use the formula?
Withing the reporting, as I have no solution to precalculate per unit values using so many different groups of units - if we want to have different per unit per each business channel or cost center etc. I understand we would need that many different precalculated "per unit" values, which would be a lot...
Regarding 2a, a simple formula would do (box C). However, for rows with auto totals, the formula would need to have priority over the autototals (box D) - how is that done? Is it possible and easy?
3. How to show $ and units separately, as in the example, if, when limiting a row by Revenue, for example, is making the units value for this row 0? How to overcome this?
As we can differenciate units using both accounts and currency dimension, with the accounts placed in rows, the elements selected would always include the units (box A). Then, in the columns, using "currency" you would choose whether to show the cost and revenue accounts ($) or units (box B). Like this you would not get 0 in units, neither you would distort $ amounts.
What is your opinion? Best regards!

Custom Template for Third Party Balance Summary Report(Java type executable

Hi Al,l we have a requirment to have a layout with some of the fields from
Third Party Balance Summary Report( Which is a Java type executable and
Data definition has Data Template attached(.xml)).
I tried in below way.
Coppied the Third Party Balance Summary Report program with same application and parameters
with. Then defined a Datadefinition with my concurrent prog short name
attached the same standard .xml file(Not sure what it is) and developed a custom template with
a custom rtf(excel output type), and submitted the program
the output is generated in excel but my custom .rtf layout is not getting applied
rather it is showing same layout as in standard.
Some thing I am missing here or else it is not the way of changing the
template.
If any one know how to do this please let me know.
My client want only some files from the standard report(no need of new fileds)
with output type xls.
Thanks in Advance.
The same content is posted in Custom Template for Third Party Balance Summary Report(Java type executable sorry for duplicating the thread, just for increase the visibility for my issue I did this.

I gave up on using a different font or figuring out if I could use Times New Roman's built-in fractions visible in Font Book (as unicodes) and did a work-around based on Michael Wasley's tips in this discussion.
https://discussions.apple.com/message/11622842#11622842
I adapted it however and think it looks a little better.
Font: Times New Roman 12 point
I used the fraction bar in 12-point (Shift-Option-1) for automatic kerning.
For the numerator, I changed the font style to superior (12-point).
For the denominator, I changed the font style to subscript (Shift-Command-hyphen) and reduced the font size to half, or 6-point using the short-cut Shift-Command-<.
When the fractions occured in my footnotes (9-point), I used 4-point in the denominator; 10- and 11-point, I used 5-point in the denominator. This seemed to produce the best result when printing.
Thank you, Michael.
-Dottie

New GL and Impact on BI Financial statement reports

Dear All,
I would like to know if and how the finacial statment reports would be affected by using the new GL extractor 0FI_GL_14. New GL is being implemented on ECC, hence the change in extractor in BI.
Is there a standard cube that can be used for Financial statement reports(Balance Sheet comparision, BS by PC,P&L reporting by PC) for New GL.
Currently we are getting our financial statement reports out of a Virtual cube which is based on a function module Module:RS_BCT_FIGL_DATA_GET_VC1.
*Our current extractor for FIGL is 0FI_GL_4 .
Appreciate your Input on this .

Hi,
You will find all the details here:
http://help.sap.com/saphelp_nw70/helpdata/EN/49/5700570223413085021a8b4ef1087a/frameset.htm
-Mayuri

0HR_PT_2 How to get back historical data for new report time type

Hi All Expert,
We have implemented and using the 0HR_PT_2 extractor for the past whole year. The Delta is working. Recently, there is requirement to read more data from the ZL custer table, and more new BW Report Time Types are added to extract such data.
The delta doesn't pick up the the past whole year data of the new report time type that we added.
Do we need to re-initialize the load to get back those historical data every time when we add a new report time type?
Please advice and Thx
Ken
Edited by: Ken Hong on Feb 27, 2008 9:24 PM
Edited by: Ken Hong on Feb 27, 2008 9:25 PM

P.s, all hidden files are shown in es file explorer as this backup folder was hidden originally. It has a '.' in front. So I'm pretty sure the folder it's gone, but as I've not erased my phone again, shouldn't the folder be somewhere in my SD card still and how can I find it using my Mac?

Financial Template Reports (Balance Sheet) - Auto appearance of running profit figure

Dear Experts,
I am working on SAP 9 Business One.
I have prepared a Customized Balance Sheet through the Financial Report Templates for presentation purposes. But when I run the balance sheet using the Financial Template Report, the balance sheet doesn't match.
I have found out the reason i.e. The running profit figure doesn't appear automatically.
Someone please guide me on how to bring the profit figure automatically in the Balance Sheet, prepared through the Financial Report Templates, without running a period end closing as it shows in the balance sheet run with the 'Chart of Accounts'.
Regards,
Dharmik Kara

hi Prasadbabu,
Try it out this way. Create a new line called "Total Sales" below export sales and local sales and Subtotal" check it. In case, you cannot see the active accounts defined for export sales and local sales, then create dummy titles as parent levels and create the "Total Sales" at the same level as the export sales and local sales. In the subtotal formula, you can select the two sales accounts. After the total sales sub-total, you can go ahead with the other sales accounts.
Bharath S

Modifying document type in FBL3N report?

Hi all,
Our users are demanding us some modifications at FBL3N report that we don't know if it's possible.
When a MIRO is posted, a line is created in G/L account report with type WE, when a MIRO is reversed by the transaction MR8M a line is created in G/L account report with type ES. We are trying do something similar for MIGO (goods receipt and goods receipts - reversal).
When someone executes movement 101 at MIGO transaction, a line is created in G/L account report with the type WE, when the user executes movement 102, goods receipt - reversal, another line is created in G/L account report with also the type WE.
Is there any standard way to config. the system to make it put a different type for reversal migos in G/L account like is done with invoices? We'd like to insert the type WS for this document, instead of WE.
[http://oi43.tinypic.com/5fes7r.jpg]
currently behavior
One line with WS tpye (movement 102) and the other one with WE type (movement 101)
Desired behavior
The goal to do that is make easier for the users analyse the data within the report.
Thanks a lot,
Amorim, Rodrigo

No, mov type 102 is a reversal of mov type 101 only
For doc type WE, if the reversal doc type field was not maintained, then system will post the reversal doc also with the original doc's doc type only.
When reversing a document, external document number assignment is not possible. Therefore a reverse document type which works with internal number assignment must be specified for all document types with external document number assignment.
Probably you might have set the external number assignment for the doc type, which you specified as reversal doc type for doc type WE......this could have be the only issue...else system will work as you desired only

To add "Transaction type" in depreciation report (S_ALR_87012026)

Hi SAP Experts,
I have a request from a user to add selection option of "Transaction Type" in the Depreciation Report.Is this possible to be done by adding in Dynamic Selection?If yes, how?
Refer to SAP Note 439407,it seem like it only cater for structure ANLAV only but not for for ANEPV - BWASL.
Please advise since im trying to avoid copying the standard program.
Regards,

Hi,
Yes, user-defined fields added as per SAP note 335065 are shown in the report output.
Alternatively, you can also create a sort version. However, check the restrictions for both options as outlined in this note.
Though still, you cannot add the transaction type as a field as the note is pointing out the tables from which fields can be extracted from: ANLAV/ANLB/ANLV only.
CI_ANLU is about user defiened fields in master data and so you cannot add BWASL in this table as this field has nothing to do with master data.
Just on the side a small comment: not sure of what benefit it would be to see the transaction type in a report such as RAHAFA_ALV01 as this report is mainly about all sort of information regarding all types of depreciation values.
I hope this helps further.
Kind regards,
Brigitte

Material Type Vs Sales report.. Urgent

my client requires materail type vs sales report for particaular period... is there any standard report for these.. or how can we do with a ABAPer.. wat fields we have give to ABAper.... to get the report....
Kiran

Hi Kiran,
Please find the herewith the SAP SD Standard Reports.
Reports: Reports consist of data, which is expected to be reveiwed or checked the transaction taken in said period. Reports are useful for analysis of decision taking for future activities.
Some of the standard reports for SD & its configuration guide is as under:
Standard SAP SD Reports:=
Statistic Group:
Purpose To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type.....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Some of the Standard reports in SD are:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Material type vs sales report

my client requires materail type vs sales report for particaular period... is there any standard report for these.. or how can we do with a ABAPer.. wat fields we have give to ABAper.... to get the report....
Kiran

Hi,
You might get more help by posting this on the SD board as well.
Steve B

Can S_PLO_86000028 Financial Statement report generate Cost-center report?

Dear Experts,
I've tried with S_PLO_86000028 Financial Statement report and it could generate report based on Profit Center but when I tried with Cost Center, it show no record. Can this report generate cost center wise report?
regards,
Abraham

Hi Saga,
S_PL0_86000028 is a new FI report for Financial Statement, created by tool Report Painter with tcode FGI1 (Create Drill-down Report).
For adding new columns, I think we can modify the form it used (0SAPBSPL-01)
It's not a good idea to copy it to z-program 'coz I still struggle with it and doesn't work well.
Solaris.

Report of type "Financial Reporting Report"

Similar Messages

Maybe you are looking for