Report ouput details should create an Attachment and it should be trigger i

Hi,
The requirement is like this, my Report output details should create an Attachment and it should be trigger in my workflow MailBox.

Prabhakar,
Are you asking a question about the SAP Business One Integration Technology for SAP NetWeaver or a question about the SAP Business One SDK. If you question is with respect to the Business One SDK, please post your question on the SAP Business One Discussion Forum as this forum is for the SAP Business One Integration Technology for SAP NetWeaver.
If this is a question about the SAP Business One Integration Technology for SAP NetWeaver, can you give a little more detail?
Thank you,
Eddy

Similar Messages

Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks

Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

When should unlock the object and when should not ?

Dear Experts,
We are looking for some suggestions from your side.
When we should unlock the object and when we should not with respect to releasing the transport request.
Like what would be the best practice.
Thanks in advance.
With Regards,
Tejas Dave.

Hi Tejas,
When we are performing an upgrades , No Objects should be locked.
Gives an Pop to unlock the Objects
Every Transport Request will moves depends on Requirement .

How to send file as attachment and call RFC to trigger event in ECC?

Hello,
A file is retrieved from FTP into PI (w/ NO MAPPING required - just pass through) and placed on the ECC appl. Server. Then, a RFC is made to trigger an event to process the file in ECC. However, a RFC cannot be called in the graphical mapping if there is no mapping required.
I have seen this Blog, u201CFile to R/3 via ABAP Proxyu201D, http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1847. [original link is broken] [original link is broken] [original link is broken] But we are told not to touch the file as it will be converted in ECC by a program.
Also, I read that using ABAP proxy-PI-FTP, I can do a pseudo mapping, simple one node, (just so a RFC can be triggered) and also pass the file as an attachment. Letu2019s say this works:
Question 1: What configuration steps in the FTP adapter that will allow me to u201Calsou201D send the file as an attachment?
Question 2: (Continue with ABAP proxy option) How do I control where will it be deposited so that the program can access it?
Question 3: If this is not the best approach, how many steps would I need to do it in BPM (i.e. pick up the file from FTP, place it on appl server, and trigger a RFC to call an event to process file)?
Thanks for any suggestions!
John_Xi

I have read those two help file and was able to use it in the ABAP proxy code. Thanks.
This is the current outcome. I totally understand that SAP PI communicates via XML. So when PI picks up a file that contains XML tags, the Inbound proxy is triggered. I can see its processing in SM50. However, when I give the Sender FTP adapter a non-XML file to pick up, the Inbound Proxy does not trigger. The file itself should be read into memory so that I can save it to the application server via ABAP code (with no mapping). That is why there is no operation mapping
The reason I am using using FTP to ABAP proxy is because I need to call a subsequent RFC step to process the file. Else, I will just use FTP to File Adapter scenario.
Question 1: I am thinking that that file is the attachment. Is that where I am incorrect and I still need to send in an XML file with the attachment as an addition?
Question 2: Is this the best approach or should I use BPM? If BPM, what steps do I need?

Which music folder should I move? And where should I put it?

Hey, this is my first post on here. I'm currently on a windows laptop and I have my first macbook coming tomorrow. I've been sorting through all of my files to get ready for moving, but I'm not sure what to do with my music files.
In my "Music" folder on Windows, I have my own 'Music' folder which contains all the files of the songs i've imported and downloaded; and then there's my 'iTunes Library' folder, which has copies of all of thise songs because I have iTunes. So my first question is which of these folders do i move?
Secondly, where do I put the folders/music on my macbook? Do I paste it all into the "Music" folder, or do I open up iTunes and paste it all directly into there? If I put it all in the Music folder will it automatically go into iTunes? Or will I then have to import it all myself?
I think they're quite simple questions, I'm just not sure what way to go about it so that everything is organised and where it should be.
Thanks in advance for any answers **

Thankyou for the quick reply, but I do not wish to move my iTunes library and keep all of it's settings, ratings, playlists etc. In fact, my iTunes library on my Windows laptop is a mess, it's very unorganised and many songs are named wrong with incorrect artwork. I want to start over with my iTunes library on the macbook, but I'm just not sure which folder I move or where I put it, to be able to start the process.
In my own "Music" folder on this laptop, I have folders named as the artists. Inside each of the artists folders I have folders named as their albums, and then inside that folder the songs are named as "01 -song name-" "02 -song name-" and so on. Inside my "iTunes library" folder, the songs are all over the place and in quite a mess. I'd think that moving the "music" folder would be the better option as it's better organised; but would that mean my music will be named in iTunes as "01 -song name-" "02 -song name-" and so on, without having the names of the artists or albums filled in?
I realise I'm making this sound quite complicated. But I do not want to move my iTunes library. I'm just unsure of which of the two folders I should move to where, in order to start my library over on the macbook.

What is a Transient Variable and when should it be used

Hello everyone,
I just want to know the details regarding the transient variable and when should we use it. what is the significance of this variable?

Transient variables are not written out when the class is serialized.
http://java.sun.com/docs/books/tutorial/essential/io/providing.html

Creating a custom report with detailed header and then associated detail

I am very new to CRMOD, so this question may be basic, but I have not found any good material yet to help me out, so here goes.
We are trying to create a Quote report that will be sent to our customers. The report needs to have both a header and detail section basically as follows:
<Header>
Quote Form
Date:
Expiration Date:
Sales Person Name:
Customer Name and address
Terms
... some other text data ...
<Detail>
Standard fields that define the quote, these are easy.
What I cannot determine how to do is create the header section. In the report designer, it only allows for a Title, logo, and another text line. Can anyone suggest another method?

I do not have the narrative option.
Options available are:
Title
Table
Chart
Pivot Table
Gauge
Active Filters
legend
Advanced
--> Column Selector
--> View Selector
--> Funnel Chart
--> Ticker
According to the documentation, the narrative view should be available from the advanced menu. Am I on a different package by chance?

Travel and Expenses / Create Expense report / Mileage Details

Hi all,
I have a requirement to do some validations whenever the user enters the license plate number in
ESS Travel and Expenses / Create Expense report / Mileage Details .The system must throw a message if the user enters a wrong license plate number.
How do i know whether this is ABAP WD iview or JWD iview.IS there any BADI or BAPI for the validations.
Where is the information about License plate getting saved.
I have created a custom infotype for my requirement. The license plate must be validated from the data present in this infotype.
Can someone post me some advice on this please.
Thanks,
Anil

Achieved by enhancing WDA Component FITE_VC_MILEAGE, view DETAILS_VIEW and added a post-method exit call to check if the licence plate entered by the users match the one saved on infotype 0017 or our custom infotype. So when the user clicks on either 'Accept' or 'Accept and New entry' buttons the license plate is check with the data stored on IT0017 or your custom infotype - If the license plate match then the user should be able to save the record but if this doesn't match then the system should throw an error message. created a custom message class in SE91.

How to create report which includes records of current month and last 7 days of previous month.

Hi Experts,
I need to create a report which includes records of current month and last 7 days of previous month.
I will get records of current month by this formula :- month({PROBSUMMARYM1.OPEN_TIME})=month(currentdate)
Please tell me how to add the records of last 7 days of previous Month for the same report.
Thanks in Advance.

Hi Ajay,
If you have more than a year data in your database then your formula will return wrong results. ie. If your data consist of 2012,2013,2014 data then below formula will return all 8th month data irrespective of year. So, you need to check year also here
month({PROBSUMMARYM1.OPEN_TIME})=month(currentdate) and
Year({PROBSUMMARYM1.OPEN_TIME})=Year(currentdate)
Now add Abhilash second statement in OR so, your formula should look like :
(month({PROBSUMMARYM1.OPEN_TIME})=month(currentdate) and
Year({PROBSUMMARYM1.OPEN_TIME})=Year(currentdate))
OR
Date({PROBSUMMARYM1.OPEN_TIME}) IN [DateAdd('d',-7,Maximum(LastFullMonth)), Maximum(LastFullMonth)
-Sastry

Reporting Question - Detail and Summary info in the same report

Hello All,
I have a situation where I have to report the detail and summary information from one cube (or multiple cubes) in a single report. Following is the example cube with smaple data and the required report
Cube - Char - 0CUSTOMER
                0MATERIAL
                0MATL_GRP
                0CURRENCY
         Key Fig - 0AMOUNT
Data
0CUSTOMER    0MATERIAL 0MATL_GRP 0AMOUNT 0CURRENCY
CUS1         MAT1      GRP1      1000    USD
CUS1         MAT2      GRP1      2000    USD
CUS1         MAT3      GRP2      3000    USD
CUS1         MAT4      GRP2      4000    USD
CUS2         MAT2      GRP1      2222    USD
If I run a report to See Which Customers have bought Material MAT1, I want to produce a report like
Material Cust Matl_Gr Amt(Matl) Amt(Cust/Mtgr) Amt(Cust)
MAT1     CUS1 GRP1    1000 USD 3000 USD       10000 USD
MAT1     CUS2 GRP1    2222 USD 2222 USD       2222 USD
Any Ideas to create such a report is welcome. I am open to use multiple cubes, Multicubes, summarized data joins etc.
Thanks in advance for the help.
Amit Gupta

Amit,
You can acheive this using single cube.
All you need to do is to define 2 restricted keyfigures the following way.
1. Amount (Cust/Material Group)
In the Restricted KF (either global or local), pull in the Material to the right side, right click on it and select "Constant Selection". Save it.
2. Amount (Customer)
Pull in both Material and Material Group and do the same step as above for both. Save it.
Now run the query and tests it. Let us know if i worked.
Gova

HT2534 i want to create an appleid and i dont have credit card. the instruction that you discribe at the top is not working in itune 11.1.3 and iphone 5s. what should i do

i want to create an appleid and i dont have credit card. the instruction that you discribe at the top is not working in itune 11.1.3 and iphone 5s. what should i do

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
You need to follow, exactly, the instructions on that HT2534 page when creating an account (the instructions won't work with existing accounts) - I've just tried it and I got the 'none' option.
e.g. on my computer's iTunes I logged out of my existing account, found a free app in the store and clicked on its free 'price' :
I then clicked on 'create Apple id' on the popup :
Agreed to the terms, filled in my details, and got the 'none' option on the payments screen :

Oracle Payables report showing details about Suppliers and balance

Hello,
I am working in Oracle 11i environment.
I am looking for a report that shows the details about Suppliers, their Invoices and the balances that exist for those suppliers. And the total invoice amount.
Which report should I run in the Oracle Applications.
Thank you

Hello Octopus,
Yes, I have run the Trial Balance report. but it is just showing the Liability account, Invoice AMount and the remaining amount columns only. I dont have any other details on the report.
The details of the reports are something like this.
Liability Account Invoice Amount Remaining Amount
01-000-2210-0000-000 9,xxx,xxx.xx 9,xxx,xxx.xx
================== ==================
Total for Report : 9,xxx,xxx.98 9,xxx,xxx.xx

How to email report ouput as attachment

Hi,
Can anybody tell me how to email report ouput as attachment.
Regards,
Soumya.

Hi
check this
Refer this link:
FORM send_mail_2 USING msgid msgno msgv1.
mailuser oder Gruppe like sy-uname default 'Ruckerk'.
DATA: express_hold_time LIKE sovaltime.
DATA: text LIKE sotxtinfo.
DATA: receiver LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
MESSAGE ZF100 (FTP an UDB fehlgeschlagen)
text-msgid = msgid.
text-msgno = msgno.
text-msgv1 = msgv1.
text-msgv2 = ' '.
text-msgv3 = ' '.
text-msgv4 = ' '.
express_hold_time
express_hold_time-days = 01.
express_hold_time-h_min_sec = 240000.
receiver
receiver-receiver = mreceivr.
Gruppe von Empfängern
receiver-rec_type = 'C'.
und Expressmeldung ausgeben
receiver-express = 'X'.
APPEND receiver.
CALL FUNCTION 'MESSAGE_SEND_AS_MAIL'
EXPORTING
msgid = text-msgid
msgno = text-msgno
msgv1 = text-msgv1
msgv2 = text-msgv2
msgv3 = text-msgv3
TABLES
receivers = receiver.
IF sy-subrc <> 0.
WRITE:/ 'hat nicht geklappt', 'SY-SUBRC =', sy-subrc.
ENDIF.
PERFORM print_error_report.
Fehlermeldung zum Abbrechen des Report's ausgeben.
MESSAGE e398 WITH 'Jobabbruch' msgv1.
ENDFORM. " SEND_MAIL_2
Another Program:
*& Report ZSENDEMAIL *
*& Example of sending external email via SAPCONNECT *
REPORT zsendemail .
PARAMETERS: psubject(40) type c default 'Hello',
p_email(40) type c default '[email protected]' .
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form POPULATE_MESSAGE_TABLE
Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform. " POPULATE_MESSAGE_TABLE
*& Form SEND_EMAIL_MESSAGE
Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform. " SEND_EMAIL_MESSAGE
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
Regards
Anji

How to Transport Variance Forms and Reports(created in KKO4 and KKO1)

Hello Experts,
I searched for the following but could not find matching answer.Will you, therefore, suggest on the following
1. I created form in KKO4/5
2. Then I created report under above form in transaction KKO1
I did above in development and now need to transport it to quality and then to production after testing
When I select menu Form -> Transport in KKO5, system prompts for customizing request.
Which options(subobjects) should I select? should I select Key figures ( I used standard available key figures in form defination)
After above customizing request for form, I selected menu Report -> Transport in KKO2 to transport the report. It prompted for subobject selection
(a) Report defination (This is by default selected and greyed out),(b) Report form, (c) Key figures , (d) Transport all languages
Which subobjects should be selected out of above.
After above selection for reports, system is prompting for workbench request creation, during WB request creation system is also giving 'prompt for customizing request' creation and by default displaying customizing request created for Form. Should such customizing requiest be part of WB request?
Secondly, I have created 8 forms and more than one report under of the these forms. Should the menu Form/Report -> Transport be selected for each form/report in same transport request? Is only that particular form/Report included in the Transport Request or does it include all existing/standard forms/reports also in transport request.
Your earliest help is greatly appreciated. Thank you in advance

Hi Jose
Thank you very much for the reply
Could you please elaborate on "if any configuration maintained at
sub-objects level"
What I am worrying about is my transport request should not overwrite anything in quality and production systems. It should take only forms and reports that I add/select in it.
I am following the below steps Please correct me if I am going wrong
1) Create new formS in KKO4
2) Create one or more reportS in KKO1 under each of above forms
3) In KKO5 (report painter: Change From screen), select the form that I created in step (1), select menu Edit->Transport form, I get the pop up to select the dependent objects for form. Here I select sub object - Form/Layout, Key Figures, Transport All Languages. On choosing Enter, I get pop up "Prompt for customizing request”. I create new request
4) In KKO5 I select second form I created in step (1) and follow the activities mentioned in step (3) but select the same customizing request. This way I add all the form I created in one customizing request
5) In KKO2, select the report that I created in step (2) select menu Report -> Transport I get pop up selection of Dependent objects for Report. Here I select sub object – Report Definition, Report Form, Key Figures, Transport All Languages. On choosing Enter, I get pop up "Prompt for workbench request. I create new request. When I choose enter on this pop up system automatically gives pop for "Prompt for customizing request” and by default displays cust. request created in step (3). Should I select Continue/Enter here?
And Does it mean both customizing and WB request are clubbed?
What is the sequence of transporting them?
Thank you in advance
Regards
Anand

Slow creating ReportDocument object and loading report

Hi all,
I realise this question has come up several times before, I've been searching the internet and have found similar problems but non that match my own. Sorry this is a little long winded but I would like to give as much detail as possible.
I use CR 2008 and VS2010 on my development machine. And I have installed CR 2008 Redist SP3 on the production server.
My application is a simple console application accepting parameters such as report name, print or export, and of course the report parameters.
CrystalDecisions.CrystalReports.Engine.ReportDocument rptDoc = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
rptDoc.Load(sParamDOC); //sParamDOC being the report name passed in via command line
It has to be like this because it integrates into an old system in the background. Of course it being like this means I can not pre-load dll's on application startup (as I've seen suggested several times).
All of this is in house, I'm an OU administrator and an administrator on the server. The server is only accessed via remote desktop and the OS is windows server 2003. I installed all of the neccesary software to make this work.
What is really puzzling me though is that when I use this program via command prompt, logged in as me, it creates the object and loads the report in a matter of seconds. Yet if anybody else runs it (even other administrators of the server) the program can take 30-60 seconds to create the ReportDocument object and the same again to load the report.
I initially only noticed this for the standard users, which was why I created another admin to test. I don't think it's a problem with the report design because it works quick for me. I read an article about this happening with reports created in Crystal version 9. So I tested with a report made from scratch in 2008 and still get the same result. I also read another article about default printers, 'dissociate printer' option is selected and locally the default printers are set to the same printer also.
Does anybody have any suggestions as to where I could look next?
I saw in another article some registry keys you can use to turn on logging for crystal reports, I want to do this but where does it put the log files?
Oh, one more thing the server orginally had redist 2.3 on when I noticed this issue, updating to SP3 (redist 3.3) if anything made it slower, and a little more inconsistant of load times.
Thanks
Gavin

I figured out what this was. I thought I would come back and post incase anyone else has the same issue... the reason it was slow for the other users is because they could not access the internet. My program doesn't use the internet but the operating system is automatically trying to verify the dll's publishers. you can disable this see the following blog:
[http://blogs.msdn.com/b/amolravande/archive/2008/07/20/startup-performance-disable-the-generatepublisherevidence-property.aspx|http://blogs.msdn.com/b/amolravande/archive/2008/07/20/startup-performance-disable-the-generatepublisherevidence-property.aspx]
Regards
Gav

Report ouput details should create an Attachment and it should be trigger i

Similar Messages

Maybe you are looking for