Report Parameter issue

Hi All
I have an rdf report version 10g , registered in oralce apps 11i .I have one parameter for the report.
When i pass the value for this parameter from SRS window , report is not giving output.
But when i pass it as null it return the value.Its a character type parameter.I have checked token also in oracle concurrent program definition, and its fine.
Also when i run the report using report bulder its running fine in both cases.
Any suggestion what causing the paramter issue.
Thanks

earlier report version is 6i , i simply opened it in report builder 10g and compiled it, i hope it did'nt caused any issue.
Thanks
Vikas

Similar Messages

Crystal report parameter issue in SAP B1 8.8

Hi Experts,
We are facing following issue in Crystal report SAP B1 8.8 version
Can not open crystal report without mentioning optional parameters.
User is forced to mention all parameters
User should allow to open crystal report by mentioning mandetory parameters
if We set for the parameter value of field [Optional Prompt] to 'True' and then preview in SAP Business One, then although the dialogue is displayed, click 'OK' without populating the parameter value, the report is run
but in our case we are passing parameters through Stored Procedure and this option is block in report to do so.
means that option available to make optional true / false is block and we are not able to do anything.
Pls. provide solution
Regards
Kamlesh Vagal

Julie.
This change has already occurred?
Thanks.

Crystal Report - Parameter issue (advanced dialog box)

In our wpf .net application we view the crystal report, the report prompts for entering 2 parameter values i.e 2 dates and inturn these parameters will be used to generate the crystal report.
The parameter panel on the left has a button (show advanced dialog box). This button should again invoke the same parameter prompt dialog box, so that the user can modify these parameters and the report can be regenerated.
Issue is that when I click on the the button, this generates a null reference exception in the code. The call stack is -
at CrystalDecisions.Windows.Forms.ParameterFieldInfo.get_isDCP()
   at CrystalDecisions.Windows.Forms.InteractiveParameterPanel.ShowAdvancedDialog(ParameterUnit pu)
   at CrystalDecisions.Windows.Forms.InteractiveParameterPanel.pu_ShowAdvancedDialog(Object sender, EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterUnit.OnShowAvancedDialog(EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterUnit.editControl_ShowAdvancedDialog(Object sender, EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterValueEditControl.OnShowAdvancedDialog(EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterValueEditControl.btnShowAdvancedDialog_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Please note, I used the .net reflector to debug the crystal report dll , the isDCP method looks like -
public bool isDCP
      get
        return (this.Attributes.Contains("IsDCP") && ((bool) this.Attributes["IsDCP"]));
Looks like the attributes value is null.
Please let me know your comments. Am I missing something while getting the report in the frontend.
I use crystal reports 2008 sp 2 (also note that my gac contains different version of crystal reports (cannot remove them - tried it) , with windows server 2003. I use web service with proxy to get the report from the local server.
Note I also tried to create sample application in which I specify the local path to reports source , this works. However when I tried to use webservice, i was getting soap exception.
Please let me know how solve above issue

So you found the Report Design forum, if you looked down one more you would have found the SDK forum, SDK stands for Software Development Kit if you did not know.
Or did you not mention you get the same error when you run this report in CR Designer, if so then you were in the right forum.
Try Service Pack 3 also
Move to the SDK forums.

SSRS : Reporting Services - Multi-Value Parameter Issue

Hi,
This problem is been around the blogs and forums for while now but may be it's not answered to the fullest. I couldn't get any satisfactory or completed solution on the issue so far, any clues/help will be highly appreciated.
My scenario is very simple :-
I am using SQL Server 2005 and SSRS. I need to develop a report which has a parameter value called Customer Name. The users should be able to select multiple customers from the list and sometimes Select All also. I tried the following :-
Created two data sets : Second dataset is just to populate the Customer Name
Created a Report Parameter and mapped with the query parameter where it says "Where CName in (@Parameter1)"
Nothing seems to be working although I tried to apply all the existing half-way solutions currently available in the forums. May be I am not getting to the right solution.
Here is what's happening :-
When used '?' like "where CName = ?" then it's working fine for the single value. {Multi value query cannot be used with ?}
But for multiple values when used @Parameter1 like "where CName in (@Parameter1)" it's giving the following error
Cannot add multi value query parameter '@Parameter1' for data set 'Dataset1' because it is not supported by the data extension.
However if commented this line it's pulling all the values whether or not selected from the parameter list.
This is the basic thing which I was not able to get the desired result, in addition I was looking to get the Customer Name parameter selected with a partial entry as we use LIKE. Example :- If the user enters 'St' in the text box the list should show all the names starting from those two letters
Starter
Steve
Steven
Stevenson etc.
I am not sure whether I'll will be able to get to this extent or not but until the multi value parameter, I am desperate to get the solution. So any sort of help/advise is highly appreciated.
Regards,

Hi,
This problem is been around the blogs and forums for while now but may be it's not answered to the fullest. I couldn't get any satisfactory or completed solution on the issue so far, any clues/help will be highly appreciated.
My scenario is very simple :-
I am using SQL Server 2005 and SSRS. I need to develop a report which has a parameter value called Customer Name. The users should be able to select multiple customers from the list and sometimes Select All also. I tried the following :-
Created two data sets : Second dataset is just to populate the Customer Name
Created a Report Parameter and mapped with the query parameter where it says "Where CName in (@Parameter1)"
Nothing seems to be working although I tried to apply all the existing half-way solutions currently available in the forums. May be I am not getting to the right solution.
Here is what's happening :-
When used '?' like "where CName = ?" then it's working fine for the single value. {Multi value query cannot be used with ?}
But for multiple values when used @Parameter1 like "where CName in (@Parameter1)" it's giving the following error
Cannot add multi value query parameter '@Parameter1' for data set 'Dataset1' because it is not supported by the data extension.
However if commented this line it's pulling all the values whether or not selected from the parameter list.
This is the basic thing which I was not able to get the desired result, in addition I was looking to get the Customer Name parameter selected with a partial entry as we use LIKE. Example :- If the user enters 'St' in the text box the list should show all the names starting from those two letters
Starter
Steve
Steven
Stevenson etc.
I am not sure whether I'll will be able to get to this extent or not but until the multi value parameter, I am desperate to get the solution. So any sort of help/advise is highly appreciated.
Regards,
you speak spanish

Report Parameter Default Value at runtime

Post Author: DMiller
CA Forum: .NET
Hi,
I need to be able to create new parameters at runtime and have been somewhat successful in this endeavor. I have one remaining issue that I am hoping that somebody can help me with. Let me explain.
When you create a parameter from within the Crystal XI designer, you are able to specify a number of default values that will display as a list box at runtime. Eg. ParameterName is MaritalStatus and default values are ("Married", "Single", "Divorced" etc). There is also the ability to specify the Default Value in the Value Options area of the screen. This value could be set to any one of the default values above - let's say that I set it to "Single". By setting the Default Value, this causes the Parameter Fields screen, at runtime, to "Select" the specific default value set above - in this case "Single", instead of showing "..." as the parameter value.
The default value setting in the Value Options is beneficial when you have reports that are usually run with certain parameter values and only occasionally these need to change. Instead of having to specify every parameter value, the user only has to set the ones that have not been defaulted or they want to change.
So, I have been successful in creating the parameters at runtime and successfully running the report. I have been unsuccessful in setting the "Default Value" as seen in the Value Options area. I have tried a number of properties on the report parameter object and have not found anything to set this.
Does anybody know how to set the "Default Value" as seen in the Value Options area in the designer at runtime?
Thanks for any help.

Post Author: JerryB
CA Forum: .NET
You have described my scnario to a tee. Did you ever figure out how to get the single default value that is available in the "value options" area when working within the Crystal Reports development environment. I am using VB.Net and have a nice report menu form and viewer but recently a user ask me to set the default value in one of my combo boxes and I have been unsuccessful in finding the correct property to use.

Report parameter is not populated with exact value in stacked column click throughs

I have stacked column chart to show below opportunity data.
Category axis: Month of created date
Series: sales stage
Aggregate: runningvalue of revenue on sales stage group.
data set has below fields.
1. opportunity id
2. created date
3. revenue
4. sales stage.
5. Calculated field: month of created date
I have a sub report which shows the detail information for that month when I click on Stacked column. In order to achieve this i have to pass a report parameter with month of created date(calculated field) on the click action of main report.
This report parameter is not getting populated when i click on the respective stacked column because of which the sub report is failing.
Any thoughts?
1. Category: month of the created date of opportunity(this
1. Category: month of the created date of opportunity(this

Thanks Katherine for reply.
Creating a subreport was never an issue, the issue was when I click on the stacked column the parameter (A) as per your screenshot was not getting populated, some times it just passes a null value.
In my report below is the sample data and in Chart
1. Series Aggregate is on Runningvalue of Revenue set to stage scope.
2. CAtegory group is on Month of Created date
3. Series group is on Stage
4. Have a report filter for Year.
Sub report parameter: Month which is passed when I click on the stacked column.
Below is sample data how my data looks like.
id
stage
createdon
revenue
1
U
1/1/2013
1000
2
Ir
1/2/2013
2000
3
Ir
2/2/2013
1000
4
A
2/3/2013
5000
5
A
3/3/2013
1000
6
Ir
3/3/2013
5000
7
Ir
4/3/2013
7000
Below is the image of actual report
In the above screenshot When i click on Region A or Region C for Aug Column, the Month Parameter for subreport is always null. When I click on Region B , parameter is having the
value as "Aug".
Let me know is there anything I am missing.

SSAS report action to pass multi-value list of dimention key values to a SSRS report parameter

This was originally posted on StackOverflow and suggested I try here as well.
I want to create a report action in an SSAS OLAP cube that generates a list of formatted values to pass into an SSRS report parameter that accepts a multi-valued parameter list. This would be applied at the
cell level in the SSAS action. I have found a solution that gets me most of the way:
How to Pass Multiple Values from an SSAS Report Drill Through Action to an SSRS Multi-Value Parameter, but not quite. The action does appear in Excel and works
if I run the action from a cell that is at or below the dimension attribute I am generating the list for, in this case,
Account Key.
Below is a link to a screen capture (unable to embed it due to lack of reputation) showing the action and dimension structure in Excel. The action works as long as I run it at the
Account Key level or below. I want to be able to run it at higher levels, such as
Account Major and still have it generate all then related Account Key values for the SSRS report parameter. Running it at the higher
Account Major level does not trigger the report to run.
Excel Action Screen Shot:
http://i.stack.imgur.com/QCGSp.png
Below is the MDX I am using to generate the value for the report parameter:
UrlEscapeFragment(
GENERATE(
DESCENDANTS(
[Account].[Account Key].CurrentMember,
[Account].[Account Key].[Account Key]
[Account].[Account Key].CURRENTMEMBER.Name,
"&rp:Account="
I am hoping that I can somehow modify the MDX above to make it return all the
Account Keys for any attribute of the Account dimension when ran from any measure cell, not just when ran at self and children of
Account Key in the pivot table.
Also, if it helps, I can execute the following MDX query on the cube and get the results I am looking for.
WITH MEMBER [Measures].[Account Key List] as
GENERATE(
DESCENDANTS([Account].[Account].CurrentMember, [Account].[Account].[Account]),
[Account].[Account].CURRENTMEMBER.NAME,
"&rp:Account=")
SELECT {[Measures].[Account Key List]} on 0,
([Account].[Account Company Number].[Account Company Number],[Account].[Account Major].[Account Major]
) on 1
FROM [Company 10 Action Demo]
Below are partial results:
10.116&rp:Account=10.116.010
10.117&rp:Account=10.117.010&rp:Account=10.117.020
10.120&rp:Account=10.120.005&rp:Account=10.120.006&rp:Account=10.120.010&rp:Account=10.120.020&rp:Account=10.120.030&rp:Account=10.120.040&rp:Account=10.120.050&rp:Account=10.120.060&rp:Account=10.120.380&rp:Account=10.120.999
10.123
Questions
Any ideas what I might need to do to get Account Key to be returned for any attribute of the
Account dimension?
Would I possibly have to alter my Account dimension in the cube to get this to work?
Thanks in advance.
Edit 1 - Adventure Works Cube Version
I was unable to get the suggested answer with the "Exists" function to work. To better demonstrate this issue, I have recreated it using the Adventure Works Cube.
I will focus on the Customer dimension, specifically the Customer and
Education attributes. I created a report action called Test Report Action. Below is the XML created for it in the cube.
<Action xsi:type="ReportAction" dwd:design-time-name="f35ad5ee-5167-4fb8-a0e0-0a74cc6e81c6">
<ID>Report Action 1</ID>
<Name>Test Report Action</Name>
<TargetType>Cells</TargetType>
<Target></Target>
<Type>Report</Type>
<ReportServer>SQLSERVER</ReportServer>
<Path>ReportServer?/Test Report</Path>
<ReportParameters>
<ReportParameter>
<Name>Test Customer Existing</Name>
<Value>UrlEscapeFragment(
GENERATE(
EXISTING DESCENDANTS(
[Customer].[Customer].CurrentMember,
[Customer].[Customer].[Customer]
[Customer].[Customer].CURRENTMEMBER.Name,
"&rp:Customer="
)</Value>
</ReportParameter>
</ReportParameters>
<ReportFormatParameters>
<ReportFormatParameter>
<Name>rs:Command</Name>
<Value>Render</Value>
</ReportFormatParameter>
<ReportFormatParameter>
<Name>rs:Renderer</Name>
<Value>HTML5</Value>
</ReportFormatParameter>
</ReportFormatParameters>
</Action>
Below are the steps to re-create the issue.
Connect to the cube in Excel
Add dimension Customer -> More Fields -> Customer
Add measure Internet Sales -> Internet Sales Amount
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action" and see customer values created for URL
When the action is ran at this point with Customer, I see the values created in the URL shown message box (since there is no SSRS report server at location specified).
Now the part I'm unable to resolve
Remove the Customer dimension and add Customer -> Demographic -> Education
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action"
Nothing happens. If I ran the action on the cell next to "Bachelors", I would want it to build up all the list of all the "Customers" that make up the "Bachelors" in the
Customer dimension as part of the report parameter. If no attributes where used in the cube from the
Customer dimension for that cell, then I would like it to return "All Customers", or something similar to show that all customers are included in the aggregations.
I am not too MDX savvy, thus far. I think I need to somehow join the
Customers to Internet Sales Amount in the Generate function portion. I have tried several different combinations of the
Customer dimension and Internet Sales Amount, along with various functions to see if I could get this to work with no success. I am hoping that someone more knowledgeable the me will have a solution. If you need more details,
please ask and I will provide them.

Simon,
Thanks for you help with this. This morning I found a workaround. Below describes what that is.
What I ended up doing was getting a list of values from a degenerate dimension that I could use to pass to SSRS to get a list of transactions for a report. Below is how I did this, in relation to the Adventure Works cube using the degenerate dimension
Internet Order Details.
WITH MEMBER [Measures].[Order Param List] AS
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
SELECT {[Measures].[Order Param List], [Measures].[Internet Sales Amount]} ON 0
,([Date].[Calendar].[Date]) ON 1
FROM [Adventure Works]
This will get a list of Sales Order Number in a text string, separated by "&rp:OrderNum=" for each measure of
Internet Sales. This would allow me to create an SSRS report to bring back detail information for each
Sales Order Number. Below are some sample results.
May 16, 2007 SO50493&rp:OrderNum=SO50494&rp:OrderNum=SO50495&rp:OrderNum=SO50496&rp:OrderNum=SO50497&rp:OrderNum=SO50498&rp:OrderNum=SO50499&rp:OrderNum=SO50500 $12,157.80
May 17, 2007 SO50501&rp:OrderNum=SO50502&rp:OrderNum=SO50503&rp:OrderNum=SO50504&rp:OrderNum=SO50505&rp:OrderNum=SO50506&rp:OrderNum=SO50507&rp:OrderNum=SO50508 $13,231.62
May 18, 2007 SO50509&rp:OrderNum=SO50510 $4,624.91
With this, I can then create a Report Action in SSRS with a Parameter Value of
UrlEscapeFragment(
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
The way I was going about it before was flawed, as I was trying to get a list of the granular values from each dimension used to build the measure value and pass each one of those as separate parameters. I just needed to set something unique for each fact
measure transaction that represents the value and uses that in a query parameter for the SSRS report.

Sub report parameter prompt appears when running Visual Studio 2008 with Crystal Reports 2008

Post Author: relliott
CA Forum: .NET
If I build a simple Crystal Report that contains another simple Crystal Sub Report, the report will print preview fine in Crystal 2008. The problem happens when add this report to a Visual Studio 2008 Web Application Project and I build and debug the application, the Crystal Viewer is prompting the user for the parameter used to link the sub report to the main report. This should never happen as the user is not supposed to see this parameter. If I type in some value for this sub-report parameter prompt, the Crystal Report Viewer gives an error message about not finding the field.
I was having the same problem in Vs2005 with Crystal 10 which is why I upgraded. Business Object's official fix for this problem was published under their KB article number c2018840 and c2019047. These hot fixes ended up causing general exception errors in Visual Studio so I scrapped these solutions.
Support had me install SP0 for Crystal 2008 (which did not fix it).
Any ideas?
Any help is greatly appreciated.
Thanks,
Rich Elliott

Hi Bontrager,
Thank you for posting in MSDN forum.
According to your description, I agree with pvdg42's suggestion, so I suggest you can try pvdg42's suggestion to install the version of
Crystal Reports 10.5 to check this issue again.
Reference:
http://forums.asp.net/t/1236730.aspx?Which+CR+version+is+in+Visual+Studio+2008+
In addition, since this forum is
to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. So if you have any issue about the
Crystal Reports, I suggest you can ask the issue to the
SAP Crystal Reports website:
http://scn.sap.com/community/crystal-reports/content?filterID=contentstatus%5bpublished%5d~objecttype~objecttype%255bthread
as pvdg42 pervious suggestion, it will be better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Problem using default value of report parameter 1 to validate parameter 2 passed in to report

I am having a problem with an SSRS report using the default value of report parameter 1 to validate parameter 2 passed in to report (via C#) instead of using the value of parameter 1 that is also passed into the report. Here are the
simplified details:
Using SSDT, SQL Server 2008 R2
SSRS report has 2 parameters:
P1 -- text, hidden, default value 'R1', ... front-end C# code can pass 'R2' or 'R1'
P2 -- text, allows multiple values, list of available values provided by stored procedure (sproc_list) that takes P1 value as a parameter. Hence, sproc_list either provides a list for P1 = 'R1' or P1 = 'R2'.
List for P1 = 'R1' is 'A', 'B', 'C'
List for P1 = 'R2' is 'A', 'B', 'D'
Values for P1 and P2 can be passed in via C# to the report.
The C# front-end displays 2 report choices to the user, R1 and R2, where both choices call the same RDL; but choice R1 passes in 'R1' for P1, and the choice R2 passes in 'R2' for P1.
Upon a users 1st time use of the report no parameters are passed in. Then when the user exits the report, the parameter value for P2 that was chosen is saved off to a file for R1 or R2, and used the next time the user selects the report.
Everything always works fine for report R1 since the default value for P1 is 'R1'.
When R2 is chosen and the user selects 'D' as the value for P2, runs the report, then exits, the P2 value of 'D' for R2 is saved to a file. When the user returns the next day to run report R2, 'R2' is passed for P1, and 'D' is passed for P2.
This is when the problem occurs. The value of 'D' for P2 is validated against a list generated for P2 based on the default value of 'R1' for parameter P1. Hence, SSRS considers 'D' an invalid value for P2 and blanks out the P2 parameter.
The user can then use the drop down list for P2 and choose 'D', but this defeats the purpose of saving the parameter values to be used the next time.
Why is the stored procedure that provides a list of available values for parameter P2 using the default value of 'R1' for parameter P1 instead of using the value of 'R2' passed into the report for parameter P1?

Hi Tom,
Sorry for my delay.
If I understand correctly, you have two parameter in your report. It is a couple of cascading parameter. If we have choose ‘R1’ of P1, the P2 values is A, B, C. ‘R2’ of P1, corresponding P2 values is A, B, D. What your requirement is to save the end use
select option of these two parameters.
In SSRS, if we have configure the parameter with default value. When we run the report, the parameter will fill with the default value to filter data. If we want to save the last status we are render the report, we need to update the default value of P1.
If we are query the default value from database, if possible, we can
update the database try to resolve the issue. Alternatively, we can set the dynamic default value for the parameter.
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Not getting Reports Parameter Form in web-forms environ

I am not able to get a report parameter form to appear for a
report called from forms via a 'run_product' command. It works
fine in client/server mode. In web-forms the report just goes
ahead and runs without the needed parameters. I have tried
explicitly passing a parameter list with the 'paramform' set to
'yes' and this did nothing. I have this on a NT box with latest
Dev2 patches applied.
1. Is the reports parameter form supposed to work in web-forms
mode?
2. How do you set it up to work, if it is supposed to work?
Thanks for any replies.
null

I guess you have to use web.show_document - I found this article
on DevConnect:
Article-ID: <Note:68647.1>
Circulation: PUBLISHED (EXTERNAL)
Platform: GENERIC Generic issue
Subject: How to show Reports HTML PARAMFORM when
calling Reports
from Forms
Modified-Date: 09-AUG-1999 18:02:04
Document-Type: BULLETIN
Content-Type: TEXT/PLAIN
Impact: MEDIUM
Component: SQLREP
PURPOSE:
This bulletin explains how to overcome the current restriction
of calling an Oracle Report from Oracle Forms and showing a
PARAMETER FORM. This is currently not possible when using the
RUN_PRODUCT built-in with
WEB DEPLOYED APPLICATIONS.
DESCRIPTION:
When you call an Oracle Report from Oracle Forms using
RUN_PRODUCT in Client-server, you can specify an optional
parameter called PARAMFORM to display the parameter form defined
in the Oracle Report.
For web-deployed applications, the PARAMFORM parameter can be
set to HTML to produce a HTML version of the parameter form.
When calling Oracle Reports from an Oracle Form using
RUN_PRODUCT and specifying PARAMFORM=HTML in the parameter list,
the Oracle Reports parameter form doesn't show the in the client
browser. If the Oracle Reports Cartridge/CGI is used and
PARAMFORM=HTML is specified, then the Oracle Reports parameter
form does appear in the client browser.
Oracle Forms does not use either the Cartridge or the CGI with
RUN_PRODUCT, and it's these thin clients that produce the HTML
Oracle Reports parameter form.
As a workaround to this problem, you can use either the
Cartridge or the CGI with the WEB.SHOW_DOCUMENT Oracle Forms
builtin. This does require either the Oracle Reports Cartrige
or the CGI to be installed. Neither of these are necessary if
the parameter form isn't required.
INSTRUCTIONS:
The following items need to be installed:
1. Oracle Reports Multi-tier Server.
2. Oracle Reports Web Cartridge
or
Oracle Reports Web CGI.
Here is a typical URL that can be specified in a browser
to run a report using Oracle Reports Cartridge implementation:
http://your_webserver/r30ows?
server=repserver21+report=emp_30.rep+
destype=cache+desformat=html+userid=scott/tiger@mydb+paramform=ht
ml
For CGI implementation:
http://your_webserver/your_vir_cgi_dir/r30cgi32.exe?
server=repserver21+report=emp_30.rep+destype=cache+desformat=html
userid=scott/tiger@mydbparamform=html
The Oracle Reports parameter form now is shown. This can be
used with WEB.SHOW_DOCUMENT issuing the request to execute the
report to the Oracle Reports Multi-Tier Server instead of using
RUN_PRODUCT.
The following code may be added to a program unit, which then
issues the request to run the report:
IF get_application_property(user_interface) = 'WEB' then
/* Use Cartridge configuration with WEB.SHOW_DOCUMENT. */
WEB.SHOW_DOCUMENT('http://your_webserver/r30ows?
server=repserver21+report=emp_30.rep+destype=cache+desformat=html
userid=scott/tiger@mydbparamform=html', '_self');
/* OR for CGI configuration. */
WEB.SHOW_DOCUMENT
('http://your_webserver/your_vir_cgi_dir/r30cgi32.exe?
server=repserver21+report=emp_30.rep+destype=cache+desformat=html
userid=scott/tiger@mydbparamform=html', '_self');
ELSE
/* use RUN_PRODUCT for client-server with PARAMFORM=Yes. */
Add_Parameter(plid, 'PARAMFORM', TEXT_PARAMETER, 'YES');
RUN_PRODUCT
(REPORTS,'emp_30.rep',SYNCHRONOUS,RUNTIME,FILESYSTEM,plid);
END;
RELATED DOCUMENTS:
Developer/2000: Guidelines for Building Applications, Deploying
Applications on the Web (for detailed instructions on setting up
the Oracle Reports Cartridge and CGI)
Laura (guest) wrote:
: I am having the same problem with Dev 6 on NT. The parameter
: screen for reports works in client/server but not web using
run-
: product. I am getting error REP-0788: Warning the value of
the
: restricted LOV parameter is not among the selectable values.
: Any reports without a parameter screen work fine with run-
: product.
: Any help would be appreciated.
null

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue
=============================================
Hi All,
I have installed Oracle 11g Fusion Middleware (11.1.1.3.0) on Oracle Linux 5 and getting some issues while configuring. What's happening is that when I run my report, it looks for the library attached to it. If I define the REPORTS_PATH in reports.sh, it works fine.
What I want to achieve is to push reports to use REPORTS_PATH environment variable from rwserver.conf instead of reports.sh
Someone told me to remove the REPORTS_PATH from reports.sh and add the REPORTS_PATH from reports.sh to a default.env in rwserver.conf, but it didn't worked.
What I know about the report server stuff in 11g Fusion Middleware is that it consists of two different servers (Standalone and In Process). Our application runs report using SRW.RUN_REPORT which basically use In Process report server setting in rwserver.conf to run the report.
The heirarchy in which reports try to look for the REPORTS_PATH is
1) REPORTS.sh
2) rwserver.conf
3) Settings as per Oracle Enterprise Manager Configuration Settings.
My standalone report server name is ReportsServer_hostname_asinst_F and the In Process Server name is rep_wls_reports_hostname_asinst_frd. When I define rep_wls_reports_hostname_asinst_frd (In process Report Server Name) for the server name parameter, I do not get any results for the report run using srw.run_report. Also I can't see the reason behind the report executed because of the following issue
http://hostname:8888/reports/rwservlet/showjobs?server=rep_wls_reports_hostname_asinst_frd
REP-51019: System user authentication is missing.
** the Singlesignon in rwservlet.properties is defined as no
But when I define ReportsServer_hostname_asinst_F (Standalone Report Server Name) as server parameter and ran the report using srw.run_report, I get result with the REPORTS_PATH defined in reports.sh not using rwserver.conf file.
http://hostname:8888/reports/rwservlet/showjobs?server=ReportsServer_hostname_asinst_F
(which shows the report just run).
Can someone who did Report Server configuration using ENV files (changing rwserver.conf), pls. send me the screenshots. Want to make sure if I am changing the correct files under correct location.
Pls. feel free to ask me questions related to the environment set up.
Thanks

Your question belongs in {forum:id=84}
John

EHS : Creating new report parameter/ symbol for MSDS cover sheet

Hi,
I am working on the SAP EHS module.
I have a requirement in which I need to have the country name (description) on the MSDS cover sheet instaed of the country key which is presently coming in there.
As per the standard settings, the report parameters available for the country point towards the country key only (char 3) i.e T005-land1 and not T005T-landx(char 15).
I understand that I need to create a new customer report parameter in the customising which will pick the data for the coversheet country.
My problem is that I am not sure where exactly do I have to write the code for this report symbol/parameter expansion.
I am not sure about the trigger for the expansion routine.
Please guide me if anyone has worked on this kind of an issue.
I will greatly appreciate your suggestions on this one.
Thanks and regards,
Hitanshu

Go to
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm">http://help.sap.com/saphelp_erp2004/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm</a>
Report Definition -> Report Creation: Process -> Document Template Layout Editing -> Editing Specification or Parameter Symbols -> Function Module

Report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

Hi,
Am trying to develop a report the parameter has an issue, it gives me an error.
There are 2 parameter (1st is Date range like start and end date and 2nd is Loan number)
When ever I select date range the Loan number parameter should go blank. If I input a loan number then date range should go blank.
What should I do. Please help
ERROR --report parameter startdate has a defaultvalue or a valid value that depends on the report parameter startdate forward dependencies are not valid

Hi Kay_MD,
If there are only two parameters, we can use first parameter charge the second one, but the second one cannot charge the first one in turn. Because parameter forward dependencies are not valid. To achieve your requirement, we can create another parameter
to control Date_range and Loan_number parameters. For more details, please see:
Add a parameter named ReportParameter1 with two available values: Date_range and Loan_number.
Use the following expression as the default value in Date_range parameter:
=iif(Parameters!ReportParameter.Value="Date_range",1,"") (1 means a useless value)
Use the following expression as the default value in Loan_number parameter:
=iif(Parameters!ReportParameter.Value="Loan_number",1,"") (1 means a useless value)
Please note that the Date_range and Loan_number parameters should enable Allow blank value (“”), and the blank values should also be contained in available values.
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Report Development issue: I have queryy of 1600 line but report builder

Report Development issue: I have queryy of 1600 line but report builder 1320 lines . But i m can't create views becasue many parameters are used in it please give solution how can i paste 1600 line in report bulder.

you would have to build a dynamic statements that will make up your query.
e.g.
select &column
from &from_clause
where &where_clause;where:
column is a user parameter that makes up of columns
from_clause is a user parameter that makes up of tables involves
where_clause is a user parameter that makes up of condition statements
and the above parameters can be defined on the report triggers AFTER PARAMETER FORM.

Report Parameter issue

Similar Messages

Maybe you are looking for