Report portlet not shown in public page

Hello,
I created a sql based report in a database provider and published it as a portlet. I'd like to place the portlet in a public page so that users don't have to login to see the report content. However, when I tried to do so, the report content can only be seen by users who have logged in and belong to the groups which are granted view privilege. In the "Grant Access" tab of the report, there is no place to make it public accessible as in page access control. I under stand that I can grant view privilege to all users so that they can see the report content, but they still need to login. Is there a way to make the report be viewed without user login?
Thanks.
Yaxu

Ok I figured out that I need to grant "execute" privilege to PUBLIC user.

Similar Messages

Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column. Now in V 5.0.5 page elements are not shown, just the page title, and under that about:blank. Suggestions? Thanks.

Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column . Now in V 5.0.5 page elements are not shown, just the page title, and under that "about:blank". Also, the activity window used to show sequential activity and now each new page replaces the last. Thanks for any suggestions re how to restore previous activity window function.

Not all YouTube videos are available for downloading, but:
There is the Free iTube Grabber which can capture almost any audio and/or video stream (it says here) but only works with Intel Macs.
http://itube-grabber.en.softonic.com/mac
Firefox Download Helper is also supposed to work, you have to be logged into YouTube first.
and the RealPlayer Downloader that comes with RealPlayer SP for Mac from:
http://www.real.com/realplayer/mac
which also downloads videos from YouTube.
There is also iTubeX which allows you to download videos (Flash, HTML5 and others), .mp3 and .swf files from almost every website as easily as possible:
http://www.macupdate.com/info.php/id/27604/itubex
Lastly: How to download Flash videos and play them in Quicktime using Perian is explained here:
http://perian.org/#watch
It's the video at the bottom of the page.

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

Reports: Object not printing on 'ALL PAGES' as specified in Property sheet,

Oracle Reports 6.0.8.11.3
Object not printing on 'ALL PAGES' as specified in Property sheet, 'PRINT OBJECT ON' property.
page size orientation has been verified at main report layout node 'f4', it is set 11x8.5
Thanks for your help.

Got it.
Problem:
Heading included in Main body printing only on first page even though, PROPERTY, PRINT_OBJECTS_ON for all objects are set to:
ALL PAGES.
Solution: Select the parent frame of the objects that are printing on all pages and drag it down to include the frame that encloses the Heading information that is currently not printing.

How to deactivate the rosetta option if it is not shown in information page

Hi,
by accident or why ever I clicked the option "start with rosetta" on my eyetv.app. STRANGE now the option is no longer viewable in information field and I can't start the application inside of the application folder because I get then the message "EyeTV can't run under Rosetta-Emulation" please deactivate the Option via Menu Ablage and unmark the option. BUT I can't see this option in information field. AND if i try to start the eyetv.app in an folder outside of applications it works.
Anyone an idea

Hi,
thank you for the hint with command+i BUT THIS DOES NOT help of course, because I already wrote that I used this.
I solved it now in different way which leads to a general question that somewhere the osx seems to note versions of programs and how to open them.
Description of this issue now in detail:
- I installed EyeTV in Version 3.0 on OSX 10.6 and started it.
- a message appears that this program is not made for this OSX version (it was made for 10.5)
- stupidly Elgato has no direct access to update from 3.0 to 3.1.2 which works with 10.6 WHICH means EyeTV has a buildin update BUT is useless if you can't start this app
- OK this leads me to idea to enable the "Start with Rosetta option"
- Didn't work
- I took then an 3.1.2 Version from my TimeMachine Backup and copied it over the old ones
- tried to start it and the message appear "This cannot run in Rosetta Mode"
- HERE IT COMES the little option field where you can disable or enable Rosetta in the information of the eyetv 3.1.2 is not shown so I was unable to disable it of course
- so i copied the file to a different directory and it works there normally
- ..... AFTER 2 hours i remembered that I had set the "Start with Rosetta" option on version 3.0 and the Snow Leopard seems to have noted this somewhere and i need a trick to see this option and the only way is to use a version 3.0 file maybe the option will appear there again
- ok copied Version 3.0 over the 3.1.2
- AND AH the rosetta option appears and was enabled and I had here the possibility to disable or unmark it
- then copy back the 3.1.2 Eyetv version file and AH it runs
So imagine that someone else uses today an application which really needs rosetta, and a user activates this and after some month a Snow Leopard 64bit version comes and nobody tells the user to deactivate the rosetta version on old package before installing new one.... poor user, I guess the 64bit version will tell the crap "This application can't run under rosetta" and the user will never find the way to disable it.
Hope there is a better way to find out for which application in which version was set the "start with rosetta" option in the system.
IF ANYONE KNOWS PLEASE let me know

"About this page" link not shown in notification page

Hi,
I have a notification page. But I am unable to see 'about this page' link on this page.
I have already set the profile options i.e.FND Diagnostics, Personalize Self Service Definitions on oaf page on site level and I can see the relevant links in normal OAF page but can not find 'about this page' or 'Personalize' link in notification page.
I have to find the table name of some field in notification page.
Please help. its very urgent.
Thanks
Amit

which responsibility ? I dont think Email Center is in OA, this link would only be available for OA pages and not on pages based on other tech stacks.
Thanks
Tapash

Data From Query not Displayed on Public Page

Hi all,
I just created a page which has a dynamic portlet that runs a query to display some data. Now I recently made this page public which means that anyone can basically access this page from the outside and not have to login. However, the data does not seem to come up after I access this page on a browser even though the banner comes up fine!! I made the table that the dynamic portlet accesses public. Is there something that I may be missing here? THanks.

Well I went to the grant access tab and there is no make portlet accessable to public. The only place to make a component accessible to public is when your editing a page. The only options when you click on the Grant Access Tab is 1) Publish To Portal and 2) Inherit Previleges From Application.

Cancel message is not shown in the page

Hi All,
This is my code for cancel in controller:
if ( "Cancel".equals(pageContext.getParameter(EVENT_PARAM)) ) {
am.invokeMethod("Cancel");
MessageToken[] token = {};
OAException confirmMessage =
new OAException("MTH", "MTH_SETUP_CANCEL", token,
OAException.INFORMATION, null);
pageContext.putDialogMessage(confirmMessage);
pageContext.setForwardURLToCurrentPage( null, false, OAWebBeanConstants.ADD_BREAD_CRUMB_NO, OAWebBeanConstants.IGNORE_MESSAGES);
this is cancel code in AM
public void Cancel() {
getTransaction().rollback();
but when I am clicking on cancel button ,message is not dispalyed.
Is there something wrong in the code ?How can I get the cancel message in the page.

PutDialog would redirect the page automatically. You dont need setForwardURLToCurrentPage().
--Prasanna

I add some node to a tree but it is not shown in web page.

Hi
thank you for reading my post.
I read some tutorial in the web and i add some tree node to a tree dynamically.
but none of them is shown :(.
I should say that i write the code that create a tree in session scope bean because my tree is placed in a fragment and fragment has no preRender method.
here is code that initiate a tree, and i think it is correct.
    public void initiateTree() {
        getTree1().setClientSide(true);
        System.out.println("Setter called");
        Context ctx=null;
        DataSource ds=null ;
        Connection con=null ;
        Statement st = null ;
        List rootMenuItems = new ArrayList();
        ResultSet rs = null;
        try {
            ctx = new InitialContext();
            ds= (DataSource) ctx.lookup("java:comp/env/jdbc/dataSource");
            con= ds.getConnection();
            st= con.createStatement();
        } catch (Exception ex) {
            ex.printStackTrace();
        try {
            java.sql.PreparedStatement childsPSt = con.prepareStatement("select * from categories where parentcategory = ?");
            rs= st.executeQuery("select * from categories where parentcategory= 0 and language = " +"'"+getLang()+"'");
            //roots
          while(rs.next()){
              int parentID = rs.getInt("categoryID");
                            System.out.println("A root has been added   "+parentID );
TreeNode aRootNode = new TreeNode();
aRootNode.setText(rs.getString("categoryname"));
            //childs
                childsPSt.setInt(1,parentID);
                ResultSet cRs = childsPSt.executeQuery();
                while(cRs.next()){
                    System.out.println("Achild has been added "+ cRs.getString("categoryname")+ " " + parentID);
TreeNode childNode = new TreeNode();
childNode.setText(cRs.getString("categoryname"));
aRootNode.getChildren().add(childNode);
getTree1().getChildren().add(aRootNode);
        } catch (SQLException ex) {
            ex.printStackTrace();
   I call this method in session bean constructor.
here is code that bind the tree in page fragment to session bean tree1
            <ui:tree binding="#{SessionBean1.tree1}" id="tree1" style="height: 167px"/>here is console output that prove the initiate method do some works.
Setter called
A root has been added   1
Achild has been added cat name 2 1
Achild has been added cat name 3 1
A root has been added   5

i think u need to add hyperlink component to the node thus cause node must carry hyperlink or anything u like to add like staticText or checkBox ....
add this code after creation the aRootNode and childNode
it may works :)
Hyperlink h = new Hyperlink();
h.setText(cRs.getString("categoryname"));
childNode .getFacets().put( childNode .CONTENT_FACET_KEY, h );

Report did not shown by report_desformat=SPREADSHEET option

Hello,
I am using forms version: 10.1.2.0.2 and reports version: 10.1.2.0.2. I want to call report from form with desformat=SPREADSHEET. I also need to pass default where clause to report.
I was using this code to show report:
web.show_document ('/reports/rwservlet?swtxls&report=SWT_FI_001e.rep&paramform=yes&whre='||whre,'_blank');
It was working fine as showing first parameter form and asking to save it or open it dialog.
But now i want to do it by SSO mode as follows:
if nvl(to_number(instr(:system.last_query,'WHERE')),0) = 0 then
whre := null;
else
whre := replace (substr(:system.last_query, instr(:system.last_query,'WHERE')),'(','( trim(');
whre := replace (replace (whre,'=',')='),'LIKE', ') LIKE' );
whre := replace(replace (whre,'%','*'),' ','&');
end if;
-- whre gets the value as: WHERE&(&TRIM(COL_val)='ABC')
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter (pl_id,'whre',TEXT_PARAMETER,whre);
-- Find the id of the Reports Object in Forms
RepId := find_report_object ('REP_FI_001E');
set_report_object_property (RepId, report_destype,cache);
set_report_object_property (RepId, report_desformat, 'SPREADSHEET');
set_report_object_property (RepId, report_server, rep_srvr);
set_report_object_property (RepId, Report_other, 'Paramform=yes');
v_rep          := run_report_object (RepId, pl_id);
Rep_status     := report_object_status (v_rep);
while rep_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') loop
rep_status := report_object_status(v_rep);
end loop;
if rep_status = 'FINISHED' then
web.show_document ('/reports/rwservlet/getJobId' ||substr(v_rep, instr(v_rep,'_',-1)+1) || '?server='|| rep_srvr,'_blank');
else
set_alert_property('err',alert_message_text,'Error when running report: Rep_status= '||rep_status);
al_button := show_alert ('err');
end if;
Report executing fine and i can see it in oracle_Home\reports\cache\ directory in html format. But i am not able to see on screen.
Even if i mentioned DesName in "After Parametr Form" trigger in report as c:\data_output\abc.xls, i can't have this report in the mentioend directory.
Can any one help. Will really appriciate.
Thanks in advance
Best Regards
Kausar.

set_report_object_property (RepId, report_destype,cache);You are creating the file in the cache. If you want a specific file (c:\data_output\abc.xls), use file as destype.

Report data not shown

I have a report that previously worked fine. It's relatively simple tied to a stored procedure with three grouping levels and a bunch of formula fields to generate summary calculations. I changed the datasource recently and now the report shows blank. I can run the stored procedure with the values listed in the Show SQL dialog box and I get data. I can refresh the report, browse data and see the data in each field that I expect to see in the report. The display remains blank no matter what I do. I've removed all the groups and shown just details, verified the database, changed the datasource location to a fresh data connection, nothing works. I can create a brand new report, attach to the stored procedure, group and drop in data and it works, but my old report refuses to show data.
I originally spent about a day creating this report so I'm hesitant to just start from scratch. Has anyone else seen this and stumbled across a solution?

hi,
have u got any solution for this?
i am also facing exactly the same issue and i have spent almost a day doing R&D on this but no result.

1 of my 2 simple reports is not shown on Iphone

Dear Experts,
I have developed 2 simple reports for Iphone. One of them is shown properly and the other one is only displayed as a grey and blank site. There are no errormessages. The reports don't have any parameters. The preview in SAP BO works fine.
You can guess my question. What is wrong with the second report? Thanks for any helpful answer.
Regards Lars

Dear Lars,
What are the differences between two reports? You may check tables used, format used etc.
Thanks,
Gordon

Crystal report not shown after application idle time

i have a web page which uses around 10 session variables to store values on a button click.and after assign session values Response.Redirect("~/url",false); to a a page which contains crystal report viewer.and report should show those session values.after keeping the application idle for 45 mins i click on the button which assign session values.then it's redirecting to the report page but the report is not shown.it shows a empty page and no errors shown(only happens application is idle for nearly 45 mins other wise works fine)
i'm using iis 7
in the web.config i have set sessionState timeout="60" and application pool idle time out to 60 mins.
any idea why this happens

Make sure you are on SP 8
Make sure you are using .Close and .Dispose on your report objects as you get done with them.
What OS? (2003, 2008, 2012)
Provide more info on the following:
The problem is that the Crystal Report Viewer does not load after a few hours.
What does that mean? Errors? Warnings? Behavior? Symptoms?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Report Viewer 2015 not navigating to next page

I am using a report viewer 2015 in an ASP.NET application with credentials passed using IReportServerConnection2.
But after clicking next page on report viewer toolbar, 2nd page of report is not shown.
The issue is reproducible with
ASP.NET application installed on Windows Server 2008 R2 but not when installed on Windows 8.1.
Please help its urgent.

Hi Vaibhav,
Is there any error displayed for this issue? If you can debug the ASP.NET application in VS, can you try to set breakpoint at the event
protected
void
Application_Error(object
sender,
EventArgs
e)
in Global.asax.cs to see whether the breakpoint would be hit and what kind of error it is when clicking next page.
Thanks,
Wynn

SAP standard sales report not shown data

We have following standard reports for sales. We have authorisation for these reports. But when we execute these report for 3P00 sales org., these reports will not shown any data saying that no data exist.
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis- Invoiced Sales - MC+Q
Sales office Analysis- Invoiced Sales - MC-E
Shipping point Analysis - MC(U
Request you to kindly provide the solution.

Hi,
Have u configured Logistic information system proper - mean to say r u maintained same settings for this sales organization
IMG >>> Logistic genral >>> LIS >>> Logistics data warehouse >>> Updating.
R u maintained statastical group in material & customer master, check that.
Kapil

Report portlet not shown in public page

Similar Messages

Maybe you are looking for